Search

This aim of this paper is to assess the efficacy of mesh-based generated reluctance network (MGRN) modeling for the performance evaluation of a permanent magnet linear machine under load conditions. In the previous publications related to the use of this modeling technique, only approach implementation under an open-circuit performance has been assessed. The MGRN approach is based on the discretization of the geometry using elementary reluctance blocks (reluctance elements). This modeling technique has been implemented in a software tool that allows the automated processing of an arbitrary geometry providing a gain in model development durations. Validation of the MGRN model has been realized by comparison with a finite element analysis (FEA). Comparisons showed that both local and global quantities evaluated by MGRN and FEA are in excellent agreement. [ABSTRACT FROM AUTHOR]

This paper deals with the fault tolerance of a five-phase flux switching machine. Short-circuit currents calculation considering inductances variation is developed. Machine behavior (torque quality, copper losses, and homopolar current) under a single short-circuit phase fault, two consecutive and nonconsecutive phases short-circuited, is simulated with a two-dimensional finite elements (2-D FE) model and validated experimentally. Then, a new method is developed to improve its performances in faulty mode, by reconfiguring reference currents. In fact, an accurate torque model is established and then used in a genetic algorithm to optimize reference currents in faulty mode. In this approach of reference currents computation, the used algorithm has multiobjectives and multiconstraints, thereby allowing choosing the appropriate fault-tolerant current solution according to our application. The torque model is considered to be more accurate and closer to the 2-D FE results in both healthy and faulty modes. Then, a comparison of machine performances in healthy, degraded, and reconfigured modes is presented. Experimental results corroborate the analysis. [ABSTRACT FROM AUTHOR]

This paper presents two short-circuit fault models of a hybrid excitation flux switching permanent magnet machine, i.e., excitation phase short-circuit and interturn short-circuit in excitation windings. Two-dimensional finite element (FE) method is used to calculate the major parameters, such as armature and excitation inductances, which are not only functions of rotor position, but also of armature and excitation currents. Moreover, in case of short-circuits, the variations of armature and excitation currents are often significant. This in turn leads to an important change in winding inductances. Therefore, in order to precisely predict machine performance under short-circuit conditions, the use of inductances versus rotor position and RMS currents is essential. With the obtained FE results, two MATLAB/Simulink-based models are established. Then, the previously mentioned short-circuits have been studied and their influences on electromagnetic performances, such as armature and excitation currents, speed and torque, armature and excitation copper losses, stator and rotor core iron losses, as well as permanent magnet (PM) eddy current losses are analyzed. Experiments have been carried out to validate the simulations. [ABSTRACT FROM PUBLISHER]

This study presents a fault-electromagnetic-thermal model of a fault-tolerant dual-star flux-switching permanent magnet motor. The analytical results in terms of phase currents, rotor velocity and output torque are firstly calculated by a Simulink-MATLAB-based fault (short-circuit) model. Then, the fault and normal phase currents are used in the motor 2D finite element method (FEM) model to calculate the copper and iron losses. As the main heat sources in electrical machines, the obtained copper and iron losses are used in the lumped parameter (LP) and the 3D FEM thermal models to calculate the temperatures of different machine components. Finally, the variation of temperatures of the machine in the presence of faults can be predicted. The results obtained by the LP and the 3D FEM models are also validated by experimental tests. A good agreement has been observed among the analytical, numerical and experimental results. In order to realise the 3D FEM model of the doubly salient rotating machine, a method to transform the salient rotor into a non-salient one have been proposed. Some methods are also proposed to enhance the performance of the cooling system and decrease the maximum temperature of the machine. [ABSTRACT FROM AUTHOR]