Search

The protease inhibitor ecotin fails to inhibit thrombin despite its broad specificity against serine proteases. A point mutation (M84R) in ecotin results in a 1.5 nM affinity for thrombin, 10(4) times stronger than that of wild-type ecotin. The crystal structure of bovine thrombin is determined in complex with ecotin M84R mutant at 2.5 A resolution. Surface loops surrounding the active site cleft of thrombin have undergone significant structural changes to permit inhibitor binding. Particularly, the insertion loops at residues 60 and 148 in thrombin, which likely mediate the interactions with macromolecules, are displaced when the complex forms. Thrombin and ecotin M84R interact in two distinct surfaces. The loop at residue 99 and the C-terminus of thrombin contact ecotin through mixed polar and nonpolar interactions. The active site of thrombin is filled with eight consecutive amino acids of ecotin and demonstrates thrombin's preference for specific features that are compatible with the thrombin cleavage site: negatively charged-Pro-Val-X-Pro-Arg-hydrophobic-positively charged (P1 Arg is in bold letters). The preference for a Val at P4 is clearly defined. The insertion at residue 60 may further affect substrate binding by moving its adjacent loops that are part of the substrate recognition sites.

Ecotin is a homodimeric protein from Escherichia coli that inhibits many serine proteases of the chymotrypsin fold, often with little effect from the character or extent of enzyme substrate specificity. This pan-specificity of inhibition is believed to derive from formation of a heterotetrameric complex with target proteases involving three types of interface: the dimerization interface, a primary substrate-like interaction, and a smaller secondary interaction between the partner ecotin subunit and the protease. A monomeric ecotin variant (mEcotin) and a single-chain ecotin dimer (scEcotin) were constructed to study the effect of a network of protein interactions on binding affinity and the role of dimerization in broad inhibitor specificity. mEcotin was produced by inserting a beta-turn into the C-terminal arm, which normally exchanges with the other subunit. While the dimerization constant (K(dim)) of wild-type (WT) ecotin was found to be picomolar by subunit exchange experiments using FRET and by association kinetics, mEcotin was monomeric up to 1 mM as judged by gel filtration and analytical centrifugation. A crystal structure of uncomplexed mEcotin to 2.0 A resolution verifies the design, showing a monomeric protein in which the C-terminal arm folds back onto itself to form a beta-barrel structure nearly identical to its dimeric counterpart. The kinetic rate constants and equilibrium dissociation constants for monomeric and dimeric ecotin variants were determined with both trypsin and chymotrypsin. The effect of the secondary binding site on affinity was found to vary inversely with the strength of the interaction at the primary site. This compensatory effect yields a nonadditivity of up to 5 kcal/mol and can be explained in terms of the optimization of binding orientation. Such a mechanism of adaptability allows femtomolar affinities for two proteases with very different specificities., (Copyright 2001 Academic Press.)

Granzyme B is a serine protease of the chymotrypsin fold that mediates cell death by cytotoxic lymphocytes. It is a processing enzyme, requiring extended peptide substrates containing an Asp residue. The determinants that allow for this substrate specificity are revealed in the three-dimensional structure of granzyme B in complex with a macromolecular inhibitor. The primary specificity for Asp occurs through a side-on interaction with Arg 226, a buried Arg side chain of granzyme B. An additional nine amino acids make contact with the substrate and define the granzyme B extended substrate specificity profile. The substrate determinants found in this structure are shared by other members of this protein class and help to reveal the properties that define substrate specificity.

Ecotin is a dimeric serine protease inhibitor from Escherichia coli which binds proteases to form a hetero-tetramer with three distinct interfaces: an ecotin-ecotin dimer interface, a larger primary ecotin-protease interface, and a smaller secondary ecotin-protease interface. The contributions of these interfaces to binding and inhibition are unequal. To investigate the contribution and adaptability of each interface, we have solved the structure of two mutant ecotin-trypsin complexes and compared them to the structure of the previously determined wild-type ecotin-trypsin complex. Wild-type ecotin has an affinity of 1 nM for trypsin, while the optimized mutant, ecotin Y69F, D70P, which was found using phage display technologies, inhibits rat trypsin with a K(i) value of 0.08 nM. Ecotin 67-70A, M84R which has four alanine substitutions in the ecotin-trypsin secondary binding site, along with the M84R mutation at the primary site, has a K(i) value against rat trypsin of 0.2 nM. The structure of the ecotin Y69F, D70P-trypsin complex shows minor structural changes in the ecotin-trypsin tetramer. The structure of the ecotin 67-70A, M84R mutant bound to trypsin shows large deviations in the tertiary and quaternary structure of the complex. The trypsin structure shows no significant changes, but the conformation of several loop regions of ecotin are altered, resulting in the secondary site releasing its hold on trypsin. The structure of several regions previously considered to be rigid is also significantly modified. The inherent flexibility of ecotin allows it to accommodate these mutations and still maintain tight binding through the compromises of the protein-protein interfaces in the ecotin-trypsin tetramer. A comparison with two recently described ecotin-like genes from other bacteria suggests that these structural and functional features are conserved in otherwise distant bacterial lineages., (Copyright 2000 Academic Press.)

The interaction between ecotin and target proteases with trypsin-like specificity has been systematically dissected to understand the structural basis of ecotin's broad inhibitory specificity and the role of the secondary binding site. Site-directed and region-specific mutagenesis were preformed at ecotin's primary site P1 residue (84), the C-terminal dimer interface (133 to 142), and two surface loops of the secondary binding site (67 to 70, 108 to 113). Substitutions at the P1 position resulted in less than fivefold difference in the potency of ecotin binding to rat trypsin, suggesting that the extended binding site is important in binding. A ten amino acid C-terminal truncation variant showed threefold weaker self-association but remained a dimer. The interactions of the secondary binding site of ecotin with bovine trypsin, rat trypsin and human urokinase-type plasminogen activator (uPA) were investigated with alanine substitutions in ecotin at Trp67, Gly68, Tyr69, Asp70, Arg108, Asn110, Lys112 and Leu113, which formed contacts between the inhibitor and protease. By combining these mutations at the secondary binding site with mutations in the primary binding site the molecular recognition between ecotin and its target serine proteases was probed. The contrast in the Ki values of the various ecotin variants towards bovine trypsin, rat trypsin and human uPA established the role of ecotin's secondary binding site in recognizing these homologous serine proteases. Ecotin binds to proteases with a chymotrypsin fold through a combination of primary and secondary site surface loops and is amenable to redesign of its potency and specificity for this class of enzymes., (Copyright 1998 Academic Press Limited.)

The crystal structure of fiddler crab collagenase complexed with the dimeric serine protease inhibitor ecotin at 2.5 A resolution reveals an extended cleft providing binding sites for at least 11 contiguous substrate residues. Comparison of the positions of nine intermolecular main chain hydrogen bonding interactions in the cleft, with the known sequences at the cleavage site of type I collagen, suggests that the protease binding loop of ecotin adopts a conformation mimicking that of the cleaved strand of collagen. A well-defined groove extending across the binding surface of the enzyme readily accommodates the two other polypeptide chains of the triple-helical substrate. These observations permit construction of a detailed molecular model for collagen recognition and cleavage by this invertebrate serine protease. Ecotin undergoes a pronounced internal structural rearrangement which permits binding in the observed conformation. The capacity for such rearrangement appears to be a key determinant of its ability to inhibit a wide range of serine proteases.

Crab collagenolytic serine protease 1 efficiently cleaves peptide bonds directly C-terminal to basic, polar, and hydrophobic amino acids. The crystal structure of this enzyme complexed to the protein inhibitor ecotin at 2.5 A resolution reveals a large primary binding pocket punctuated on one wall by the side chain of aspartate-226. Removal or relocation of this negatively charged group by site-directed mutagenesis generates variant enzymes which retain very high activities toward selected substrates. Full retention of activity toward hydrophobic substrates in collagenase D226G is accompanied by a 10-100-fold reduction in k(cat)/Km toward basic residues. In contrast, restoration of the negative charge in a trypsin-like position in collagenase D226G/G189D regenerates nearly full activity toward basic substrates while introducing a 5-fold decrease in k(cat)/Km toward hydrophobic amino acids. These results imply that the collagenase S1 pocket has multiple distinct binding sites for different amino acid side chains, a suggestion supported by molecular modeling studies based on the crystal structure. The ease of specificity modification in the primary binding site of this serine protease parallels similar observations with the bacterial enzymes alpha-lytic protease and subtilisin, and stands in sharp distinction to the extensive mutagenesis required to alter specificity in trypsin.

The three-dimensional structures of complexes of trypsin N143H, E151H bound to ecotin A86H are determined at 2.0 A resolution via X-ray crystallography in the absence and presence of the transition metals Zn2+, Ni2+, and Cu2+. The binding site for these transition metals was constructed by substitution of key amino acids with histidine at the trypsin-ecotin interface in the S2'/P2' pocket. Three histidine side chains, two on trypsin at positions 143 and 151 and one on ecotin at position 86, anchor the metals and provide extended catalytic recognition for substrates with His in the P2' pocket. Comparisons of the three-dimensional structures show the different geometries that result upon the binding of metal in the engineered tridentate site and suggest a structural basis for the kinetics of the metal-regulated catalysis. Of the three metals, the binding of zinc results in the most favorable binding geometry, not dissimilar to those observed in naturally occurring zinc binding proteins.

Recognition for proteolysis by trypsin depends almost exclusively on tight binding of arginine or lysine side chains by the primary substrate specificity pocket. Although extended subsite interactions are important for catalysis, the majority of binding energy is localized in the P1 pocket. Analysis of the interactions of trypsin with the P1 residue of the bound inhibitors ecotin and bovine pancreatic trypsin inhibitor suggested that the mutation D189S would improve metal-assisted trypsin N143H, E151H specificity toward peptides that have a Tyr at P1 and a His at P2'. In the presence of transition metals, the catalytic efficiency of the triple mutant Tn N143H, E151H, D189S improved toward the tyrosine-containing peptide AGPYAHSS. Trypsin N143H, E151H, D189S exhibits a 25-fold increase in activity with nickel and a 150-fold increase in activity with zinc relative to trypsin N143H, E151H on this peptide. In addition, activity of trypsin N143H, E151H, D189S toward an arginine-containing peptide, YLVGPRGHFYDA, is enhanced by copper, nickel, and zinc. With this substrate, copper yields a 30-fold, nickel a 70-fold, and zinc a 350-fold increase in activity over background hydrolysis without metal. These results demonstrate that the engineering of multiple substrate binding subsites in trypsin can be used to delocalize protease specificity by increasing relative substrate binding contributions from alternate engineered subsites.

Ecotin, an Escherichia coli periplasmic protein of 142 amino acids, has been shown to be a potent inhibitor of a group of homologous serine proteases with widely differing substrate recognition. It is highly effective against a number of enzymes, including both pancreatic and neutrophil-derived elastases, chymotrypsin, trypsin, factor Xa, and kallikrein. Recent structural and functional studies on ecotin and its interactions with different serine proteases have clarified these initial observations and revealed the remarkable features of this protein in inhibiting a strikingly large subset of the chymotrypsin family of serine proteases. The structures of the ecotin:serine protease complexes provide the first examples of protein-protein recognition where the concept of specificity of interactions needs to be reexamined. The binding sites show a fluidity of protein contacts derived from ecotin's innate flexibility in fitting itself to proteases while strongly interfering with their function.

The 2.4 A crystal structure (R = 0.180) of the serine protease inhibitor ecotin was determined in a complex with trypsin. Ecotin's dimer structure provides a second discrete and distal binding site for trypsin and, as shown by modelling experiments, other serine proteases. The second site is approximately 45 A from the reactive/active site of the complex and features 13 hydrogen bonds, including six that involve carbonyl oxygen atoms and four bridged by water molecules. Contacts ecotin makes with trypsin's active site are similar to, though more extensive than, those found between trypsin and basic pancreatic trypsin inhibitor. The side chain of ecotin Met84 is found in the substrate binding pocket of trypsin where it makes few contacts, but also does not disrupt the solvent structure or cause misalignment of the scissile bond. This first case of protein dimerization being used to augment binding energy and allow chelation of a target protein provides a new model for protein-protein interactions and for protease inhibition.

We have expressed the serine protease inhibitor ecotin to high levels (greater than 400 mg/l of cell culture) in its natural mileau, the Escherichia coli periplasm, using the endogenous signal peptide and the heterologous tac promoter. After induction, functional, soluble ecotin comprises 15% of total cellular protein. This expression system has facilitated initiation of a crystallographic study to determine the structural basis for inhibition of the pancreatic serine proteases by ecotin. Ecotin was co-crystallized with rat trypsin mutant D102N. Preliminary crystallographic analysis of co-crystals showed that they diffract to at least 2.7 A, and indicate that they belong to the monoclinic space group, P21. The cell constants are a = 52.0 A, b = 93.3 A, c = 160.7 A, and beta = 96 degrees. Four molecules each of trypsin and ecotin are found in the asymmetric unit.

Ecotin, a serine protease inhibitor found in the periplasm of Escherichia coli, is unusual in its ability to inhibit chymotrypsin, trypsin, and elastase. To address the structural basis of its broad specificity, the gene for ecotin has been cloned and its sequence determined. A promoter of the 17-base pair spacing class was identified, and the probable transcriptional start site lies 18 base pairs upstream from a ribosome binding locus. The gene is followed by a series of conserved repetitive extragenic palindromic sequences. Ecotin has a signal peptide of 20 amino acids which confirms its periplasmic localization. Sequence analyses by Edman degradation and mass spectrometry confirmed 71% of the deduced protein sequence of calculated monomeric molecular mass 16,096 Da. Comparisons of the primary structure for the 142-amino acid protein with the major classes of serine protease inhibitors suggest that ecotin is a novel inhibitor. The reactive site of ecotin was determined to be Met84 for its complexes with chymotrypsin, trypsin, and elastase. The scissile Met84-Met85 bond lies within a disulfide-bonded protein segment similar to other classes of inhibitors.