Search

The clinical translation of protein drugs that act intracellularly is limited by the absence of safe and efficient intracellular protein delivery vehicles. Here, pH-sensitive coiled-coil peptide-cross-linked hyaluronic acid nanogels (HA-cNGs) were designed and investigated for targeted intracellular protein delivery to CD44 overexpressing MCF-7 breast cancer cells. HA-cNGs were obtained with a small size of 176 nm from an equivalent mixture of hyaluronic acid conjugates with GY(EIAALEK) 3 GC (E3) and GY(KIAALKE) 3 GC (K3) peptides, respectively, at pH 7.4 by nanoprecipitation. Circular dichroism (CD) proved the formation of coiled-coil structures between E3 and K3 peptides at pH 7.4 while fast uncoiling at pH 5.0. HA-cNGs showed facile loading of cytochrome C (CC) and greatly accelerated CC release under mild acidic conditions (18.4%, 76.8%, and 91.4% protein release in 24 h at pH 7.4, 6.0, and 5.0, respectively). Confocal microscopy and flow cytometry displayed efficient internalization of CC-loaded HA-cNGs and effective endosomal escape of CC in MCF-7 cancer cells. Remarkably, HA-cNGs loaded with saporin, a ribosome inactivating protein, exhibited significantly enhanced apoptotic activity to MCF-7 cells with a low IC 50 of 12.2 nM. These coiled-coil peptide-cross-linked hyaluronic acid nanogels have appeared as a simple and multifunctional platform for efficient intracellular protein delivery.

A popular strategy for overcoming the limited plasma half-life of peptide heptad repeat 2 (HR2) fusion inhibitors against HIV-1 is conjugation with biocompatible polymers such as poly(ethylene glycol) (PEG). However, despite improved resistance to proteolysis and reduced renal elimination, covalent attachment of polymers often causes a loss in therapeutic potency. In this study, we investigated the molecular origins of the loss in potency upon conjugation of linear, midfunctional, and hyperbranched PEG-like polymers to peptides that inhibit HIV-1-host cell membrane fusion. Fluorescence binding assays revealed that polymer conjugation imparted mass transport limitations that manifested as coexistent slower association and dissociation rates from the gp41 target on HIV-1. Furthermore, reduced association kinetics rather than affinity disruption was responsible for the loss in antiviral potency. Finally, the binding assays indicated that the unmodified HR2-derived peptide demonstrated diffusion-limited binding. The observed high potency of the unmodified peptide in HIV-1 inhibition assays was therefore attributed to rapid peptide conformational changes upon binding to the gp41 prehairpin structure. This study emphasizes that the view in which polymer ligation to therapeutic peptides inadvertently leads to loss in potency due to a loss in binding affinity requires scientific verification on a case-by-case basis and that high peptide potency may be due to rapid target-binding events.

Phage display is a powerful tool for the selection of highly affine, short peptide ligands. While originally primarily used for the identification of ligands to proteins, the scope of this technique has significantly expanded over the past two decades. Phage display nowadays is also increasingly applied to identify ligands that selectively bind with high affinity to a broad range of other substrates including natural and biological polymers as well as a variety of low-molecular-weight organic molecules. Such peptides are of interest for various reasons. The ability to selectively and with high affinity bind to the substrate of interest allows the conjugation or immobilization of, e.g., nanoparticles or biomolecules, or generally, facilitates interactions at materials interfaces. On the other hand, presentation of peptide ligands that selectively bind to low-molecular-weight organic materials is of interest for the development of sensor surfaces. The aim of this article is to highlight the opportunities provided by phage display for the identification of peptide ligands that bind to synthetic or natural polymer substrates or to small organic molecules. The article will first provide an overview of the different peptide ligands that have been identified by phage display that bind to these "soft matter" targets. The second part of the article will discuss the different characterization techniques that allow the determination of the affinity of the identified ligands to the respective substrates.

This report describes the synthesis and properties of a series of polyvalent side chain peptide-synthetic polymer conjugates designed to block the CD4 binding site on gp120 and inhibit HIV-1 entry into a host cell. The peptide sequences in the conjugates are based on the CDR H3 region of the neutralizing anti-HIV-1 antibody IgG1 b12. Using a consecutive ester-amide/thiol-ene postpolymerization modification strategy, a library of polymer conjugates was prepared. Evaluation of the HIV-1 inhibitory properties revealed that midsized polymer conjugates displayed the highest antiviral activity, while shorter and longer conjugates proved to be less efficacious inhibitors. The lower molecular weight conjugates may not have sufficient length to span the distance between two neighboring gp120 containing spikes, while the higher molecular weight conjugates may be compromised due to a higher entropic penalty that would accompany their binding to the viral envelope. Although the IC(50) values for these polymer conjugates are higher than that of the parent IgG1 b12 antibody, the strategy presented here may represent an interesting antiviral approach due to the attractive properties of such polymer therapeutics (relatively inexpensive production and purification costs, high thermal and chemical stability in storage conditions, long half-life in biological tissues, low immunogenicity, and protection from proteolytic degradation).

Herein the concept of tandem postpolymerization modification as a versatile route to synthesize well-defined, highly functionalized polymers is introduced. Poly(pentafluorophenyl methacrylate) obtained by atom transfer radical polymerization was first modified with allylamine, which displaces the active ester to give well-defined polymers with pendant alkene groups, which are difficult to obtain by direct (radical) polymerization of allylic-functional monomers. The produced poly(allylmethacrylamide) was modified by a second postpolymerization modification reaction with a thiol-terminated peptide (CVPGVG) using AIBN as the radical source. NMR, IR, and SEC demonstrated successful conjugation onto the polymer to give a polymer-peptide hybrid material. This versatile strategy should extend the scope of controlled radical polymerization and "click"-type reactions.

Small-angle neutron scattering and pulsed-gradient spin-echo NMR have been used to examine the solution conformation of a series of water soluble poly(N-(2-hydroxypropyl) methacrylamide) P(HPMA) co-polymer drug delivery vehicles incorporating a coiled-coil peptide motif as a novel pH sensitive non-covalent linker. The conformation of the HPMA homopolymer is well-described by a Gaussian coil model and changing pH from pH 7 to pH 5 has little effect on the solution conformation, as quantified via the radius of gyration. Copolymerisation with 5-10mol% of the K3 peptide bearing methacrylate monomer (K3-MA), gave a series of copolymers that exhibited an increase in radius of gyration at both pH's, despite being typically 30% lower in molecular weight, indicating that the K3-MA causes a perturbation (expansion) of the copolymer conformation. Subsequent addition of an equimolar amount of the complementary peptide E3 makes little further difference to the conformation, indicative of the intimate binding (coiled-coil motif) between the two peptides. Again, the effects of pH are small. Only the addition of a large aromatic structure such as methotrexate causes a further perturbation of the structure - the hydrophobic interaction between the MTX units causes a significant collapse of the polymer coil. These findings further elaborate the understanding of those factors that determine the solution conformation of novel polymer therapeutics., (Copyright © 2011 Elsevier B.V. All rights reserved.)

The development of various controlled radical polymerization techniques as well as site- and residue specific strategies to modify peptides/proteins with synthetic polymers have made polymer chemistry a powerful tool to address materials problems at the biology interface. This article will present recent examples for bioactive surface modification and polymer therapeutics; it will highlight the use of controlled radical polymerization techniques and bioconjugation strategies to develop surface coatings for regenerative medicine and diagnostics, respectively, polymer-based nanomedicines.

This article reports the design, synthesis and results of first in vitro model studies of a conceptually novel class of polymer therapeutics in which the cargo is attached to a polymer backbone via a noncovalent, biologically inspired coiled coil linker, which is formed by heterodimerization of two complementary peptide sequences that are linked to the polymer carrier and the cargo, respectively. In contrast with the polymer-drug conjugates prepared so far, in which the drug is typically attached via an enzymatically or hydrolytically cleavable linker, the noncovalent polymer therapeutics proposed in this article offer several potential advantages, including facile access to combination therapeutics and rapid production of compound libraries to screen for structure-activity relationships. Furthermore, the coiled coil based peptide linkers may not only be useful to bind and release guests but may also play an active role in enhancing and directing intracellular transport and trafficking, which may make these constructs of particular interest for the cytosolic delivery of biomolecular therapeutics.

Hydrophilic/hydrophobic patterning is a powerful strategy to control folding in non-natural polymers/oligomers. In this contribution, we present a novel strategy for the preparation of alternating hydrophilic/hydrophobic patterned non-natural peptide foldamers. This strategy relies on the post-modification of a reactive peptide precursor that can be prepared via standard solid phase peptide synthesis without the need for side chain protective groups. The peptide scaffolds consisted of an alternating sequence of l-leucine and l-allylglycine residues. Using thiol-ene chemistry, the double bonds in the side chains of the l-allylglycine units could be post-modified with cysteamine hydrochloride, thioglycolic acid, 1-thioglycerol or 2,3,4,6-tetra-O-acetyl-thio-beta-d-glucopyranose to afford alternating hydrophilic/hydrophobic patterned peptides. In agreement with the alternating hydrophilic/hydrophobic patterned primary structure, cysteamine and thioglycolic acid post-modified octapeptides were found to adopt a beta-sheet secondary structure in basic or acidic aqueous media, respectively. The proposed synthetic approach is not only of interest to generate diverse libraries of peptide foldamers from a limited number of reactive precursor scaffolds, but may also represent an attractive, general strategy for the synthesis of peptides with complex side chain functionalities that are not easily accessible via standard solid phase techniques.

This manuscript reports on the self-assembly properties of two complementary peptide sequences, E3 and K3, which are derived from the known IAAL E3/K3 heterodimeric coiled coil motif. Circular dichroism spectroscopy, analytical ultracentrifugation, and fluorescence resonance energy transfer experiments indicated that a stoichiometric mixture of these two peptides forms a stable heterodimeric coiled coil at pH 7. At pH 5, in contrast, the E3/K3 heterodimeric coiled coil is unstable and unfolds to generate E3 homotrimers that coexist with K3 unimers and a small fraction of K3 homodimers. This pH-induced unfolding transition was unprecedented for this coiled coil motif but is of interest as it occurs within a physiologically relevant pH range, as it is encountered, for example, during cellular uptake via the endosomal pathway. This feature, in combination with the relatively short length of the E3 and K3 peptides and the high stability of the E3/K3 coiled coil at pH 7 makes this folding motif very attractive for the development of noncovalent polymer therapeutics and self-assembled biohybrid hydrogels.

This contribution investigates the effects of chain length and chemical composition on the secondary structure and LCST behavior of a library of short, elastin-like peptides based on the GVGVP motif. CD experiments revealed that most of the investigated peptides showed the typical elastin conformational behavior with a decrease in random coil and an increase in beta-turn character with increasing temperature. For several peptides, LCST behavior was observed in aqueous NaCl solutions containing 10 mg/mL peptide. By extrapolation of the LCSTs measured at different NaCl concentrations to zero-salt concentration, apparent LCSTs were determined. The apparent LCST was found to decrease with increasing peptide chain length, which correlated well with the trend in the predicted partition coefficients. The apparent LCST of the peptides could be manipulated by successive replacement of the valine residues by more hydrophobic isoleucine, leucine, or phenylalanine residues. Within a particular series of variants, the apparent LCST was found to decrease with an increasing number of valine replacements, which also correlated well with the predicted evolution of the partition coefficient. Although the relative importance of the overall peptide hydrophobicity and the conformational preferences of the constituent amino acids on the LCST behavior still remains an open question, the results described in this contribution clearly demonstrate that short, elastin-like peptides are potentially attractive building blocks for a range of materials applications in biomedicine and engineering.

This feature article provides a compilation of tools available for preparing well-defined peptide/protein-polymer conjugates, which are defined as hybrid constructs combining (i) a defined number of peptide/protein segments with uniform chain lengths and defined monomer sequences (primary structure) with (ii) a defined number of synthetic polymer chains. The first section describes methods for post-translational, or direct, introduction of chemoselective handles onto natural or synthetic peptides/proteins. Addressed topics include the residue- and/or site-specific modification of peptides/proteins at Arg, Asp, Cys, Gln, Glu, Gly, His, Lys, Met, Phe, Ser, Thr, Trp, Tyr and Val residues and methods for producing peptides/proteins containing non-canonical amino acids by peptide synthesis and protein engineering. In the second section, methods for introducing chemoselective groups onto the side-chain or chain-end of synthetic polymers produced by radical, anionic, cationic, metathesis and ring-opening polymerization are described. The final section discusses convergent and divergent strategies for covalently assembling polymers and peptides/proteins. An overview of the use of chemoselective reactions such as Heck, Sonogashira and Suzuki coupling, Diels-Alder cycloaddition, Click chemistry, Staudinger ligation, Michael's addition, reductive alkylation and oxime/hydrazone chemistry for the convergent synthesis of peptide/protein-polymer conjugates is given. Divergent approaches for preparing peptide/protein-polymer conjugates which are discussed include peptide synthesis from synthetic polymer supports, polymerization from peptide/protein macroinitiators or chain transfer agents and the polymerization of peptide side-chain monomers.

The present work describes synthetic concepts for the coupling of peptides to polyphenylene dendrimers (PPDs). Novel functionalized cyclopentadienones have been synthesized whose Diels-Alder cycloaddition with various core molecules leads to polyphenylene dendrimers possessing (protected) amino or carboxyl groups. In addition, the resulting functionalized molecules exhibit the characteristic shape-persistence and monodispersity of PPDs. Their functions have been used for the attachment of polylysine to the dendritic scaffold. Three different methods for the decoration of dendrimers with polypeptides are presented. First, polylysine segments are grafted from the surface of the dendrimers employing alpha-amino acid N-carboxyanhydride (NCA) polymerization. Second, the C-terminal carboxyl groups of protected polypeptides are activated and then coupled to the amino groups on the surface of the PPD. Finally, cysteine terminated, unprotected peptide sequences are attached to polyphenylene dendrimers utilizing the addition of the sulfhydryl group of a cysteine to the maleimide functions on the dendrimer surface. Moreover, Diels-Alder cycloaddition of suitably functionalized cyclopentadienons to a desymmetized core molecule allows the design of a dendritic scaffold with a specific number of different anchor groups on its periphery. These approaches are important for the tailoring of new, shape-persistent, polyfunctional multiple antigen conjugates.

Biologically-inspired peptide sequences have been explored as auxiliaries to mediate self-assembly of synthetic macromolecules into hierarchically organized solution and solid state nanostructures. Peptide sequences inspired by the coiled coil motif and "switch" peptides, which can adopt both amphiphilic alpha-helical and beta-strand conformations, were conjugated to poly(ethylene glycol) (PEG). The solution and solid state self-assembly of these materials was investigated using a variety of spectroscopic, scattering and microscopic techniques. These experiments revealed that the folding and organization properties of the peptide sequences are retained upon conjugation of PEG and that they provide the driving force for the formation of the different nanoscale structures which were observed. The possibility of using defined peptide sequences to direct structure formation of synthetic polymers together with the potential of peptide sequences to induce a specific biological response offers interesting prospects for the development of novel self-assembled and biologically active materials.

The first example of an oligothiophene-peptide conjugate, which was obtained by solid-phase acylation of a resin-bound silk-inspired oligopeptide sequence with a carboxylic acid functionalized regioregular tetra(3-hexylthiophene) derivative, is reported.

The conjugation of peptides/proteins and synthetic polymers is a useful strategy to overcome some of the limitations related to the use of the individual components. This review will highlight two aspects: enhanced structural control at the nanometer level and improved performance, in particular with respect to biomedical applications. In the former case, peptide sequences are mainly used to mediate self-assembly of synthetic polymers. In the latter case, conjugation of an appropriate synthetic polymer to a pharmaceutically active peptide/protein can, for example, prevent premature enzymatic degradation and enhance blood circulation times, which is therapeutically advantageous.

Herein we describe the structure and dynamics of self-assembled nano-objects generated from poly(ethylene glycol) based (PEG-ylated) coiled-coil hybrid block copolymers. Electron paramagnetic resonance (EPR) experiments on spin-labeled samples provided a strong indication for a parallel alignment of the peptide helices in at least the dimeric coiled-coil nano-object and indicated that the PEG chains are folded rather closely around the peptide core of the nano-objects. The EPR results were supported by AFM studies, which revealed the presence of discrete nanosized objects in thin, spin cast films of the block copolymers on mica substrates. Since their size and structure may be engineered via directed mutations in the amino acid sequence, these nano-objects may be interesting building blocks for the development of supramolecular materials with various potential applications.

This paper discusses the solid state and melt nanoscale structure of a series of novel poly(ethylene glycol) (PEG) hybrid di- and triblock copolymers, which contain amphiphilic beta-strand peptide sequences. The block copolymers have been prepared via solid-phase synthesis, affording perfectly monodisperse peptide segments with a precisely defined alpha-amino acid sequence. Attenuated total reflection Fourier transform infrared spectroscopy and X-ray scattering experiments indicate that the self-assembly properties of the peptide sequences are retained upon conjugation to PEG and mediate the formation of an ordered superstructure consisting of alternating PEG layers and peptide domains with an highly organized antiparallel beta-sheet structure. The results suggest that combination of biological structural motifs with synthetic polymers may be a versatile strategy for the development of novel self-assembled materials with complex internal structures and the potential to interface with biology.