Search

The MAP tag system comprises a 14-residue peptide derived from mouse podoplanin and its high-affinity monoclonal antibody PMab-1. We determined the crystal structure of PMab-1 complexed with the MAP tag peptide and found that the recognition required only the N-terminal 8 residues of MAP tag sequence, enabling the shortening of the tag length without losing the affinity for PMab-1. Furthermore, the structure illustrated that the MAP tag adopts a U-shaped conformation when bound by PMab-1, suggesting that loop-inserted MAP tag would assume conformation compatible with the PMab-1 binding. We inserted the 8-residue MAP tag into multiple loop regions in various proteins including fibronectin type III domain and G-protein-coupled receptors and tested if they maintain PMab-1 reactivity. Despite the conformational restraints forced by the insertion position, all MAP-inserted mutants were expressed well in mammalian cells at levels comparable to the non-tagged proteins. Furthermore, the binding by PMab-1 was fully maintained even for the mutant where MAP tag was inserted at a structurally restricted β-hairpin, indicating that the MAP tag system has unique feature that allows placement in the middle of protein domain at desired locations. Our results indicate the versatile utility of the MAP tag system in ‘site-specific epitope insertion’ application.

Annotation of peptide sequence from tandem mass spectra constitutes the central step of mass spectrometry-based proteomics. Peptide mass spectra are obtained upon gas-phase fragmentation. Identification of the protein from a set of experimental peptide spectral matches is usually referred as protein inference. Occurrence and intensity of these fragment ions in the MS/MS spectra are dependent on many factors such as amino acid composition, peptide basicity, activation mode, protease, etc. Particularly, chemical derivatizations of peptides were known to alter their fragmentation. In this study, the influence of acetylation, guanidinylation, and their combination on peptide fragmentation was assessed initially on a lipase (LipA) from Bacillus subtilis followed by a bovine six protein mix digest. The dual modification resulted in improved fragment ion occurrence and intensity changes, and this resulted in the equivalent representation of b- and y-type fragment ions in an ion trap MS/MS spectrum. The improved representation has allowed us to accurately annotate the peptide sequences de novo. Dual labeling has significantly reduced the false positive protein identifications in standard bovine six peptide digest. Our study suggests that the combinatorial labeling of peptides is a useful method to validate protein identifications for high confidence protein inference. Graphical Abstract ᅟ.

Peptide amidination labeling using S-methyl thioacetimidate (SMTA) is investigated in an attempt to increase the number and types of peptides that can be detected in a bottom-up proteomics experiment. This derivatization method affects the basicity of lysine residues, and is shown here to significantly impact the idiosyncracies of peptide fragmentation and peptide detectability. The unique and highly reproducible fragmentation properties of SMTA-labeled peptides, such as the strong propensity for forming b1 fragment ions, can be further exploited to modify the scoring of peptide-spectrum pairs and improve peptide identification. To this end, we have developed a supervised post-processing algorithm to exploit these characteristics of peptides labeled by SMTA. Our experiments show that, although the overall number of identifications are similar, the SMTA modification enabled the detection of 16-26% peptides not previously observed in comparable CID/HCD tandem mass spectrometry experiments without SMTA labeling.

Snake venoms are complex mixtures of toxic and often spectacularly biologically active components. Some African vipers contain polyhistidine and polyglycine peptides, which play a crucial role in the interaction with metal ions during the inhibition of snake metalloproteases. Polyhistidine peptide fragments, known as poly-His tags, play many important functions, e.g., in metal ion transport in bacterial chaperon proteins. In this paper, we report a detailed characterization of Cu(2+), Ni(2+), and Zn(2+) complexes with the EDDHHHHHHHHHG peptide fragment (pHG) derived from the venom of the rough scale bush viper (Atheris squamigera). In order to determine the thermodynamic properties, stoichiometry, binding sites, and structures of the metal-pHG complexes, we used a combination of experimental techniques (potentiometric titrations, electrospray ionization mass spectrometry, UV-vis spectroscopy, circular dichroism spectroscopy, and electron paramagnetic resonance spectroscopy) and extensive computational tools (molecular dynamics simulations and density functional theory calculations). The results showed that pHG has a high affinity toward metal ions. The numerous histidine residues located along this sequence are efficient metal ion chelators with high affinities toward Cu(2+), Ni(2+), and Zn(2+) ions. The formation of an α-helical structure induced by metal ion coordination and the occurrence of polymorphic binding states were observed. It is proposed that metal ions can "move along" the poly-His tag, which serves as a metal ion transport pathway. The coordination of Cu(2+), Ni(2+), and Zn(2+) ions to the histidine tag is very effective in comparison with other histidine-rich peptides. The stabilities of the metal-pHG complexes increase in the order Zn(2+)Ni(2+)≪ Cu(2+).

With tandem mass spectrometry (MS/MS), spectra can be generated by various fragmentation techniques including collision-induced dissociation (CID), higher-energy collisional dissociation (HCD), electron capture dissociation (ECD), electron transfer dissociation (ETD) and so on. At the same time, de novo sequencing using multiple spectra from the same peptide generated by different fragmentation techniques is becoming popular in proteomics studies. The focus of this study is the use of paired spectra from CID (or HCD) and ECD (or ETD) fragmentation because of the complementarity between them. We present a de novo peptide sequencing framework for multiple tandem mass spectra, and apply it to paired spectra sequencing problem. The performance of the framework on paired spectra is compared to another successful method named ${\rm pNovo}+$ . The results show that our proposed method outperforms ${\rm pNovo}+$ in terms of full length peptide sequencing accuracy on three pairs of experimental datasets, with the accuracy increasing up to 13.6% compared to ${\rm pNovo}+$ .

N- and C-terminal amino acid sequences of human epidermal growth factor receptor-2 (HER2), purified from breast cancer cell lines (SK-BR-3 and BT-474), were analyzed at the protein level using mass spectrometry. Two N-terminal peptides and one C-terminal peptide were obtained. Their MALDI-PSD analyses indicated that one of the N-terminal sequences and the C-terminal sequence were identical to those found in UniProtKB/Swiss-Prot. However, the other N-terminal sequence was not in the database and was considered as a novel variant. This variant may result from the cleavage at a potential alternative site for cleavage of the signal peptide.

In recent years, de novo peptide sequencing from mass spectrometry data has developed as one of the major peptide identification methods with the emergence of new instruments and advanced computational methods. However, there are still limitations to this method; for example, the typically used spectrum graph model cannot represent all the information and relationships inherent in tandem mass spectra (MS/MS spectra). Here, we present a new method named NovoHCD which applies a spectrum graph model with multiple types of edges (called a multi-edge graph), and integrates into it amino acid combination (AAC) information and peptide tags. In addition, information on immonium ions observed particularly in higher-energy collisional dissociation (HCD) spectra is incorporated. Comparisons between NovoHCD and another successful de novo peptide sequencing method for HCD spectra, pNovo, were performed. Experiments were conducted on five HCD spectral datasets. Results show that NovoHCD outperforms pNovo in terms of full length peptide identification accuracy; specifically, the accuracy increases 13%-21% over the five datasets.

A new imidazolo- and thiol-containing ligand is prepared and characterized with the intent to serve as surrogate and mimic for the canonical ligands imidazole and hexa-histidinyl peptide (his-6) in immobilized metal affinity chromatography (IMAC) [1,2] systems. The affinity of this ligand: 1,8 bis (N1,N1')imidazolo-octa-(3,6)-dithiane or bImOdS, to Ni-nitrilotriacetic acid (Ni-NTA) complex in solution is measured and compared with that of imidazole and his-6 peptide via isothermal titration calorimetry (ITC). In addition, bImOdS is compared with his-6 binding to the solid-state matrix of Ni-NTA-charged agarose beads, as employed routinely in IMAC. Results reported here include the following: (1) two imidazole moieties bind within a single Ni-NTA complex, while bImOds, being an imidazolo dimer, binds with 1:1, and his-6 peptide binds with 1:3 stoichiometry. (2) Enthalpies of reaction for imidazole and his-6 peptide are reported - these can be utilized to predict changes in affinity in IMAC systems with temperature, should protein unfolding/refolding steps in purification be desired at alternate temperatures. (3) Metal analyses of the Ni-NTA agarose beads suggests that ∼2/3 of the nickel is present in low-affinity sites, which will complicate protein separations at high protein-concentration loading. An improved procedure for subtracting ligand dilution heats from ITC analyses is presented in an Appendix.

The establishment of efficient and safe gene delivery systems is crucial for biomedical applications. To address this objective, novel, ternary hybrid gene vectors are designed with viral capsid peptides in non-viral gene carriers. The viral peptide, TQVGQKT, is coupled with a membrane active peptide, LK15. Which acts as a linker to tag peptide with plasmid DNA. Additionally, polyethylenimine (PEI) is employed to condense the complexes further, thereby forming ternary DNA/TQVGQKT-LK15/PEI complexes. The ternary complexes result in rapid internalization leading to significantly enhanced cellular transfection. The new moiety, TQVGQKT, as well as enhanced cellular transfection, will certainly provide crucial insights for the design of novel non-viral gene carriers with efficient and safe properties.

Characterization of protein cross-linking, particularly without prior knowledge of the chemical nature and site of cross-linking, poses a significant challenge, because of their intrinsic structural complexity and the lack of a comprehensive analytical approach. Toward this end, we have developed a generally applicable workflow-XChem-Finder-that involves four stages: (1) detection of cross-linked peptides via (18)O-labeling at C-termini; (2) determination of the putative partial sequences of each cross-linked peptide pair using a fragment ion mass database search against known protein sequences coupled with a de novo sequence tag search; (3) extension to full sequences based on protease specificity, the unique combination of mass, and other constraints; and (4) deduction of cross-linking chemistry and site. The mass difference between the sum of two putative full-length peptides and the cross-linked peptide provides the formulas (elemental composition analysis) for the functional groups involved in each cross-linking. Combined with sequence restraint from MS/MS data, plausible cross-linking chemistry and site were inferred, and ultimately confirmed, by matching with all data. Applying our approach to a stressed IgG2 antibody, 10 cross-linked peptides were discovered and found to be connected via thioethers originating from disulfides at locations that had not been previously recognized. Furthermore, once the cross-link chemistry was revealed, a targeted cross-link search yielded 4 additional cross-linked peptides that all contain the C-terminus of the light chain.

A straightforward cleavage method for N- acylated peptides based on the phenylthiohydantoin (PTH) formation is presented. The procedure could be applied to acid-stable resins, such as TentaGel HL–NH\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$_{2}$$\end{document}. We designed a cleavable linker that consists of a lysine residue with the \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\upalpha $$\end{document}-amino group blocked by Boc, whereas the \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\upvarepsilon $$\end{document}-amino group is used for peptide synthesis. After the peptide assembly is completed, the protecting groups in peptide side chains are removed using trifluoroacetic acid, thus liberating also the \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\upalpha $$\end{document}-amino group of the lysine in the linker. Then the reaction with phenyl isothiocyanate followed by acidolysis causes an efficient peptide release from the resin as a stable PTH derivative. Furthermore, the application of a fixed charge tag in the form of 2-(4-aza-1-azoniabicyclo[2.2.2]octylammonium)acetyl group increases ionization efficiency and reduces the detection limit, allowing ESI-MS/MS sequencing of peptides in the subfemtomolar range. The proposed strategy is compatible with standard conditions during one-bead-one-compound peptide library synthesis. The applicability of the developed strategy in combinatorial chemistry was confirmed using a small training library of \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\upalpha $$\end{document}-chymotrypsin substrates. Electronic supplementary material The online version of this article (doi:10.1007/s11030-013-9453-y) contains supplementary material, which is available to authorized users.

A comprehensive investigation was performed to understand the influence of sequence scrambling in peptide ions on peptide identification results. To achieve this, four tandem mass spectrometry datasets with scrambled ions included and with them excluded were analyzed by Crux, X!Tandem, SpectraST, Lutefisk, and PepNovo. While the different algorithms differed in their performance, an increase in the number of correctly identified peptides was generally observed when removing scrambled ions, with the exception of the SpectraST algorithm. However, the variation of the match scores upon removal was unpredictable. Following these investigations, an interpretation was given on how the scrambled ions affect peptide identification. Lastly, a simulated theoretical mass spectral library derived from the NIST peptide Libraries was constructed and searched by SpectraST to study whether scrambled ions in predicted mass spectra could affect peptide identification. Consistent with the peptide library search results, no significant variations for dot product scores as well as peptide identification results were observed when these ions were included in the theoretical MS/MS spectra. From the five adopted algorithms, the SpectraST and Crux provided the most robust results, whereas X!Tandem, PepNovo, and Lutefisk were sensitive to the existence of the scrambled ions, especially the latter two de novo sequencing algorithms.

De novo peptide sequencing by mass spectrometry represents an important strategy for characterizing novel peptides and proteins, in which a peptide's amino acid sequence is inferred directly from the precursor peptide mass and tandem mass spectrum (MS/MS or MS(3)) fragment ions, without comparison to a reference proteome. This method is ideal for organisms or samples lacking a complete or well-annotated reference sequence set. One of the major barriers to de novo spectral interpretation arises from confusion of N- and C-terminal ion series due to the symmetry between b and y ion pairs created by collisional activation methods (or c, z ions for electron-based activation methods). This is known as the "antisymmetric path problem" and leads to inverted amino acid subsequences within a de novo reconstruction. Here, we combine several key strategies for de novo peptide sequencing into a single high-throughput pipeline: high-efficiency carbamylation blocks lysine side chains, and subsequent tryptic digestion and N-terminal peptide derivatization with the ultraviolet chromophore AMCA yield peptides susceptible to 351 nm ultraviolet photodissociation (UVPD). UVPD-MS/MS of the AMCA-modified peptides then predominantly produces y ions in the MS/MS spectra, specifically addressing the antisymmetric path problem. Finally, the program UVnovo applies a random forest algorithm to automatically learn from and then interpret UVPD mass spectra, passing results to a hidden Markov model for de novo sequence prediction and scoring. We show this combined strategy provides high-performance de novo peptide sequencing, enabling the de novo sequencing of thousands of peptides from an Escherichia coli lysate at high confidence.

Amidation is a post-translational modification found at the C-terminus of ~50% of all neuropeptide hormones. Cleavage of the C(α)-N bond of a C-terminal glycine yields the α-amidated peptide in a reaction catalyzed by peptidylglycine α-amidating monooxygenase (PAM). The mass of an α-amidated peptide decreases by 58 Da relative to its precursor. The amino acid sequences of an α-amidated peptide and its precursor differ only by the C-terminal glycine meaning that the peptides exhibit similar RP-HPLC properties and tandem mass spectral (MS/MS) fragmentation patterns. Growth of cultured cells in the presence of a PAM inhibitor ensured the coexistence of α-amidated peptides and their precursors. A strategy was developed for precursor and α-amidated peptide pairing (PAPP): LC-MS/MS data of peptide extracts were scanned for peptide pairs that differed by 58 Da in mass, but had similar RP-HPLC retention times. The resulting peptide pairs were validated by checking for similar fragmentation patterns in their MS/MS data prior to identification by database searching or manual interpretation. This approach significantly reduced the number of spectra requiring interpretation, decreasing the computing time required for database searching and enabling manual interpretation of unidentified spectra. Reported here are the α-amidated peptides identified from AtT-20 cells using the PAPP method.

Here we report on a novel peptide library based method for HLA class II binding motif identification. The approach is based on water soluble HLA class II molecules and soluble dedicated peptide libraries. A high number of different synthetic peptides are competing to interact with a limited amount of HLA molecules, giving a selective force in the binding. The peptide libraries can be designed so that the sequence length, the alignment of binding registers, the numbers and composition of random positions are controlled, and also modified amino acids can be included. Selected library peptides bound to HLA are then isolated by size exclusion chromatography and sequenced by tandem mass spectrometry online coupled to liquid chromatography. The MS/MS data are subsequently searched against a library defined database using a search engine such as Mascot, followed by manual inspection of the results. We used two dodecamer and two decamer peptide libraries and HLA-DQ2.5 to test possibilities and limits of this method. The selected sequences which we identified in the fraction eluted from HLA-DQ2.5 showed a higher average of their predicted binding affinity values compared to the original peptide library. The eluted sequences fit very well with the previously described HLA-DQ2.5 peptide binding motif. This novel method, limited by library complexity and sensitivity of mass spectrometry, allows the analysis of several thousand synthetic sequences concomitantly in a simple water soluble format. Here we report on a novel peptide library based method for HLA class II binding motif identification. The approach is based on water soluble HLA class II molecules and soluble dedicated peptide libraries. A high number of different synthetic peptides are competing to interact with a limited amount of HLA molecules, giving a selective force in the binding. The peptide libraries can be designed so that the sequence length, the alignment of binding registers, the numbers and composition of random positions are controlled, and also modified amino acids can be included. Selected library peptides bound to HLA are then isolated by size exclusion chromatography and sequenced by tandem mass spectrometry online coupled to liquid chromatography. The MS/MS data are subsequently searched against a library defined database using a search engine such as Mascot, followed by manual inspection of the results. We used two dodecamer and two decamer peptide libraries and HLA-DQ2.5 to test possibilities and limits of this method. The selected sequences which we identified in the fraction eluted from HLA-DQ2.5 showed a higher average of their predicted binding affinity values compared to the original peptide library. The eluted sequences fit very well with the previously described HLA-DQ2.5 peptide binding motif. This novel method, limited by library complexity and sensitivity of mass spectrometry, allows the analysis of several thousand synthetic sequences concomitantly in a simple water soluble format.

The modification of serine and threonine residues in proteins by a single N-acetylglucosamine (O-GlcNAc) residue is an emerging post-translational modification (PTM) with broad biological implications. However, the systematic or large-scale analysis of this PTM is hampered by several factors, including low stoichiometry and the lability of the O-glycosidic bond during tandem mass spectrometry. Using a library of 72 synthetic glycopeptides, we developed a two-stage tandem MS approach consisting of pulsed Q dissociation (PQD) for O-GlcNAc peptide detection and electron transfer dissociation (ETD) for identification and site localization. Based on a set of O-GlcNAc specific fragment ions, we further developed a score (OScore) that discriminates O-GlcNAc peptide spectra from spectra of unmodified peptides with 95% sensitivity and >99% specificity. Integrating the OScore into the two-stage LC-MS/MS approach detected O-GlcNAc peptides in the low fmol range and at 10-fold better sensitivity than a single data-dependent ETD tandem MS experiment.

Protein surface accessible residues play an important role in protein folding, protein-protein interactions and protein-ligand binding. However, a common problem associated with the use of selective chemical labeling methods for mapping protein solvent accessible residues is that when a complicated peptide mixture resulting from a large protein or protein complex is analyzed, the modified peptides may be difficult to identify and characterize amongst the largely unmodified peptide population (i.e., the 'needle in a haystack' problem). To address this challenge, we describe here the development of a strategy involving the synthesis and application of a novel 'fixed charge' sulfonium ion containing lysine-specific protein modification reagent, S,S'-dimethylthiobutanoylhydroxysuccinimide ester (DMBNHS), coupled with capillary HPLC-ESI-MS, automated CID-MS/MS, and data-dependant neutral loss mode MS(3) in an ion trap mass spectrometer, to map the surface accessible lysine residues in a small model protein, cellular retinoic acid binding protein II (CRABP II). After reaction with different reagent:protein ratios and digestion with Glu-C, modified peptides are selectively identified and the number of modifications within each peptide are determined by CID-MS/MS, via the exclusive neutral loss(es) of dimethylsulfide, independently of the amino acid composition and precursor ion charge state (i.e., proton mobility) of the peptide. The observation of these characteristic neutral losses are then used to automatically 'trigger' the acquisition of an MS(3) spectrum to allow the peptide sequence and the site(s) of modification to be characterized. Using this approach, the experimentally determined relative solvent accessibilities of the lysine residues were found to show good agreement with the known solution structure of CRABP II.

We present a novel approach to perform C-terminal sequence analysis by discriminating the C-terminal peptide in a mass spectral analysis of a CNBr digest. During CNBr cleavage, all Met-Xxx peptide bonds are cleaved and the generated internal peptides all end with a homoserine lactone (hsl)-derivative. The partial opening of the hsl-derivatives, by using a slightly basic buffer solution, results in the formation of m/z doublets (Deltam=18 Da) for all internal peptides and allows to identify the C-terminal peptide which appears as a singlet in the mass spectra. Using two model proteins we demonstrate that this approach can be applied to study proteins purified in gel or in solution. The chemical opening of the hsl-derivative does not require any sample clean-up and therefore, the sensitivity of the C-terminal sequencing approach is increased significantly. Finally, the new protocol was applied to characterize the C-terminal sequence of two recombinant proteins. Tandem mass spectrometry by MALDI-TOF/TOF allowed to identify the sequence of the C-terminal peptides. This novel approach will allow to perform a proteome-wide study of C-terminal proteolytic processing events in a high-throughput fashion.

A simple and effective method was developed for peptide sequencing and protein identification through the determination of its N-terminal residue. The method of N-terminal carbamidomethylation with iodoacetamide could specifically and remarkably enhance the intensity of a(1) ions in the tandem mass spectra of the peptide derivatives without significantly altering their fragmentation pattern, thus allowing determination of their N-terminal residues. The effectiveness and specificity of the method was demonstrated by confirming and extending sequence interpretation of several model peptides and proteins. The developed method was then applied in the LC-MS/MS analysis of the tryptic digests of myoglobin and a whole protein extract from rat heart tissues. The results from database searches were well validated with the enhancement of a(1) ions in tandem mass spectra and the specificity of protein identification was obtained when the information of N-terminal residues was included in the database search.

We used a N-biotinylated peptide analog of the C-terminal domain of the tumor suppressor protein, p21cip1/waf1 to elucidate peptide/protein interacting partners. The C-terminal domain of p21cip1/waf1 protein spanning 141-160 amino acid residues is known to bind PCNA and this interaction is important in many biological processes including cell-cycle control. This C-terminal 20-mer efficiently extracts PCNA in the presence of a variety of N- or C-terminally attached affinity tags. Using difference silver stained 2D gels combined with in-gel tryptic digests, we identified the difference spots using MALDI-TOF mass spectrometry-based peptide mass fingerprinting followed by a database search using PROFOUND against NCBIs human nonredundant protein sequence data bank. Identified spots include the p48 subunit of chromatin assembly factor-1, the heat shock 70 protein analog BiP, calmodulin, nucleolin and a spot similar in size to dimeric PCNA. In contrast, microcapillary ion-trap LC-MS/MS analysis of a tryptic digest of entire affinity extracts derived from both control and experimental runs followed by database searches using SEQUEST confirmed the presence of most of the above proteins. This strategy also identified hnRNPA1, HPSP90alpha, HSP40 and T-complex protein 1, a protein similar to prothymosin, and a possible allelic variant of the p21cip1/waf1 protein. The use of N-biotinylated peptide derived from the C-terminal domain of p21cip1/waf1 protein in proteomic analysis exemplified here suggests that peptides obtained from intracellular functional screens could also potentially serve as efficient baits to discover new drug targets.

Sequence analysis of bovine and porcine collagen type I indicates that some partial sequences are specific for bovine or porcine collagen type I, which can be used as marker peptides for gelatin differentiation. Bovine and porcine gelatins were digested with trypsin. The digest mixtures were analyzed with high performance liquid chromatography/mass spectrometry ( HPLC/MS ). Marker peptides were identified by the method of peptide sequence tag. The results indicated that the bovine and porcine. gelatins could be differentiated according to the sequences of marker peptides. Further analysis indicated that some prolines in the marker peptides were hydroxylated, which should be taken into account to increase the confidence in peptide identification. The relative abundance of marker peptides in gelatin of different molecular weight range was also investigated. The results indicate that identification of the marker peptides in the digested gelatins by HPLC/MS is an alternative method for differentiation of bovine and porcine gelatins.

Reversed database is popularly used to estimate the confidence level of database searching results from tandem MS data in large-scale proteomic research. However, it is not suitable for the evaluation of PMF (Peptide mass fingerprint) data, which is a classical protein identification approach and generally used still now. In this study, another type of database called “reversed-shift database” is constructed by exchanging the “ K ” or “ R ” amino acid (for the fully tryptic peptides) with their following amino acids, which was demonstrated to be effective for evaluating both tandem MS and PMF data. Reversed-shift processing could avoid the unchanged mass weight of parent ions in the reversed processing for those peptides with the same cleavage site amino acid at the end of peptide and its leading one, which could not be separated by PMF results. Reversed-shift database presents an efficient approach for the evaluation of the large-scale PFF, PMF, and their combined identified results, and should be a powerful tool in the integration of PMF and tandem MS data.

There is considerable interest in the discovery of peptide ligands that bind to protein targets. Discovery of such ligands is usually approached by screening large peptide libraries. However, the individual peptides must be tethered to a tag that preserves their individual identities (e.g., phage display or one-bead one-compound). To overcome this limitation, we have developed a method for screening libraries of label-free peptides for binding to a protein target in solution as a single batch. The screening is based on decreased amide hydrogen exchange by peptides that bind to the target. Hydrogen exchange is measured by mass spectrometry. We demonstrate the approach using a peptide library derived from the Escherichia coli proteome that contained 6664 identifiable features. The library was spiked separately with a peptide spanning the calmodulin binding domain of endothelial nitric oxide synthase (eNOS, 494-513) and a peptide spanning the N-terminal 20 residues of bovine ribonuclease A (S peptide). Human calmodulin and bovine ribonuclease S (RNase S) were screened against the library. Using a novel data analysis workflow, we identified the eNOS peptide as the only calmodulin binding peptide and S peptide as the only ribonuclease S binding peptide in the library.

A 21-mer peptide that can be used to covalently introduce synthetic molecules into proteins has been developed. Phage-displayed peptide libraries were subjected to reaction-based selection with 1,3-diketones. The peptide was further evolved by addition of a randomized region and reselection for improved binding. The resulting 21-mer peptide had a reactive amino group that formed an enaminone with 1,3-diketone and was used as a tag for labeling of maltose binding protein. Using this peptide tag and 1,3-diketone derivatives, a variety of molecules such as reporter probes and functionalities may be covalently introduced into proteins of interest.

A method to identify and sequence recombinant mouse acetylcholinesterase (rMoAChE) including the native and organophosphate-modified active-site peptides was developed using capillary liquid chromatography with electrospray ionization, quadrupole/time-of-flight mass spectrometry. Addition of 2-propanol to the reversed-phase gradient system and a decreased gradient slope improved the peptide resolution and the signal of the active-site peptide. The highest protein coverage and active-site peptide signal were achieved when the rMoAChE:chymotrypsin ratio of 5:1 was used with digestion at 37 degrees C. rMoAChE and the active-site peptide were identified and sequenced from chymotryptic digests of native, methyl paraoxon-, and ethyl paraoxon-inactivated rMoAChE showing unequivocally that the exact modification site was the active-site serine.

The N-terminal sequence is important for the identification of a protein and the confirmation of its N-terminal processing. Although mass spectrometry (MS) is a sensitive and high-throughput method to sequence and identify peptides and proteins, N-terminal peptides, diluted among most of the peptides that do not originate at the N-termini, are not easy to identify directly with MS. To develop a simple and rapid method to identify and sequence the N-terminal peptide of a protein, a new strategy based on specific sulfonation of terminal amino groups and selective monitoring of the sulfonated peptide was introduced. After a protein had been guanidinated, 2-sulfobenzoylated, and reduced, it was digested with trypsin and analyzed by MS. Because of the strong acidity of sulfonic groups and the specific sulfonation of alpha-amino groups, the sulfonated N-terminal peptide dominated as base peak in the negative mode peptide mass fingerprint (PMF) and was easy to identify. The N-terminal peptide was then selected as precursor ion for tandem mass spectrometric (MS/MS) analysis. Four proteins were tested with this method and their N-terminal peptides were successfully recognized and sequenced. The results suggest that the addition of a sulfonic acid group facilitates the identification and de novo sequencing of N-terminal peptides.

Sodium ion addition of 20 naturally occurring amino acids was investigated by triple quadruple tandem mass spectrometry. Results showed that most amino acids had extraordinarily weak force for non-covalent binding to sodium ion, while proline and phenylalanine easily captured sodium ion from solvents. By tandem mass spectrometry “sequence docking” method on Q-TOF2 (Waters, USA), full amino acid sequence of C-terminal peptide of acidic fibroblast growth factor was analyzed and it was confirmed that the adding site of sodium ion was proline (6Pro). Sodium ion-addition peaks in peptide mass fingerprinting (PMF) apparently decreased after adding 1% formic acid. The peptide sequence without sodium ion-addition and the sequence gap were determined using de novo technology, which was the same as the sequence of sodium ion-addition peptide.

A recombinant peptide (near the C-terminal region of head involution defective protein) of 4.9kDa has been completely sequenced and characterized using medium-resolution mass spectrometry (QTOF). The observed difference in the experimental mass and the theoretical mass is due to b-mercaptoethanol adduct formation on the cysteine residue. The fragmentation pattern is correlated with the primary structure of the protein. Top-down sequencing of the peptide was extended to small proteins like barstar of mass 10.3kDa. Copyright # 2006 John Wiley & Sons, Ltd. The top-down approach of sequencing and characterizing proteins by tandem mass spectrometry (MS/MS) is gaining popularity due to two main technical developments. One is the availability of high-resolution Fourier transform mass spectrometry (FTMS) 1,2 and the other is the electron-capture dissociation (ECD) technique. 3,4 The major advantage of the top-down approach is that performing an MS/MS experiment on intact protein ions makes the entire sequence available for examination. This enables complete characterization of the protein and any associated post-translational modifications (PTMs). 5 Furthermore, the masses of intact

After tryptic digestion of protein Z a peptide corresponding to residues 1-43 has been isolated and sequenced. Smaller peptides were generated by treatment of the peptide with pepsin and then separated by high-performance liquid chromatography. The purity of the peptides was sufficient for mass spectrometric measurement. Thirteen gamma-carboxyglutamic acid residues have been identified and the peptide shows strong homology to the corresponding domains of the classical vitamin-K-dependent blood clotting proteins.

Almost all large-scale projects in mass spectrometry-based proteomics use trypsin to convert protein mixtures into more readily analyzable peptide populations. When searching peptide fragmentation spectra against sequence databases, potentially matching peptide sequences can be required to conform to tryptic specificity, namely, cleavage exclusively C-terminal to arginine or lysine. In many published reports, however, significant numbers of proteins are identified by non-tryptic peptides. Here we use the sub-parts per million mass accuracy of a new ion trap Fourier transform mass spectrometer to achieve more than a 100-fold increased confidence in peptide identification compared with typical ion trap experiments and show that trypsin cleaves solely C-terminal to arginine and lysine. We find that non-tryptic peptides occur only as the C-terminal peptides of proteins and as breakup products of fully tryptic peptides N-terminal to an internal proline. Simulating lower mass accuracy led to a large number of proteins erroneously identified with non-tryptic peptide hits. Our results indicate that such peptide hits in previous studies should be re-examined and that peptide identification should be based on strict trypsin specificity.

The peptide GsMTx4 from the tarantula venom (Grammostola spatulata) inhibits mechanosensitive ion channels. In this work, we report the cDNA sequence encoding GsMTx4. The gene is translated as a precursor protein of 80 amino acids. The first 21 amino acids are a predicted signal sequence and the C-terminal residues are a signal for amidation. An arginine residue adjacent to the N-terminal glycine of GsMTx4 is the cleavage site for release. The resulting peptide is 34 amino acids in length with a C-terminal phenylalanine and not a serine-alanine previously identified [J. Gen. Physiol. 115 (2000) 583]. We chemically synthesized this peptide and folded it in 0.1 M Tris, pH 7.9 with oxidized/reduced glutathione (1/10). Properties of the synthetic peptide were identical to the wild type for high performance liquid chromatography (HPLC), mass spectrometry, CD, and NMR. We also cloned GsMTx4 in a thioredoxin fusion protein system containing six histidines. Nickel affinity columns allowed rapid purification and folding occurred in conditions described above with 0.5 M guanidiniumHCl present. Thrombin cleavage liberated GsMTx4 with three extra amino acids at the N-terminus. The retention time in HPLC analysis and the CD spectrum was similar to wild type. Both the synthetic and cloned peptides were active in the patch clamp assay.

Here, we describe a method for protein identification and de novo peptide sequencing. Through in vivo cell culturing, the deuterium-labeled lysine residue (Lys-d4) introduces a 4-Da mass tag at the carboxyl terminus of proteolytic peptides when cleaved by certain proteases. The 4-Da mass difference between the unlabeled and the deuterated lysine assigns a mass signature to all lysine-containing peptides in any pool of proteolytic peptides for protein identification directly through peptide mass mapping. Furthermore, it was used to distinguish between N- and C-terminal fragments for accurate assignments of daughter ions in tandem MS/MS spectra for sequence assignment. This technique simplifies the labeling scheme and the interpretation of the MS/MS spectra by assigning different series of fragment ions correctly and easily and is very useful in de novo peptide sequencing. We have also successfully implemented this approach to the analysis of protein mixtures derived from the human proteome.

The accurate mass values of all immonium, y 1 , y 2 , a 2 , and b 2 ions of tryptic peptides composed of the 20 standard amino acids were calculated. The differences between adjacent masses in this data set are greater than 10 mDa for more than 80% of the values. Using this mass list, the majority of low mass ions in quadrupole-time of flight tandem mass spectra of peptides from tryptic digests and from an elastase digest could be assigned. Besides the a 2 /b 2 ions, which carry residues 1-2 from the N-terminus, a variety of internal dipeptide b ions were regularly observed. In case internal proline was present, corresponding dipeptide b ions carrying proline at the N-terminal position occurred. By assigning the dipeptide b ions on the basis of their accurate mass, bidirectional or unidirectional sequence information was obtained, which is localized to the peptide N-terminus (a 2 /b 2 ions) or not localized (internal b ions). Identification of the y 1 and y 2 ions by their accurate mass provides unidirectional sequence information localized to the peptide C-terminus. It is shown that this patchwork-type sequence information extractable from accurate mass data of low-mass ions is highly efficient for protein identification.

Here we describe a new method to identify calcium-binding sites in proteins using high-resolution liquid chromatography-mass spectrometry in concert with calcium-directed collision-induced dissociations. Our method does not require any modifications to the liquid chromatography-mass spectrometry apparatus, uses standard digestion protocols, and can be applied to existing high-resolution MS data files. In contrast to NMR, our method is applicable to very small amounts of complex protein mixtures (femtomole level). Calcium-bound peptides can be identified using three criteria: (1) the calculated exact mass of the calcium containing peptide; (2) specific dissociations of the calcium-containing peptide from threonine and serine residues; and (3) the very similar retention times of the calcium-containing peptide and the free peptide.

SeqMS, a software aid for de novo sequencing by tandem mass spectrometry (MS/MS), which was initially developed for the automated interpretation of high-energy collision-induced dissociation (CID) MS/MS spectra of peptides, has been applied to the interpretation of low-energy CID and post-source decay (PSD) spectra of peptides. Based on peptide backbone fragmented ions and their related ions, which are the dominant ions observed in the latter two techniques, the types of ions and their propensities to be observed have been optimized for efficient interpretation of the spectra. In a typical example, the modified SeqMS allowed the complete sequencing of a 31-amino acid synthetic peptide, except for the isobaric amino acids (Leu or Ile, and Lys or Gln), based on only the low-energy CID-MS/MS spectrum.

The preparation of peptide nucleic acids (PNA)carrying a c-myc tag-peptide sequence isdescribed. These PNA-peptide chimeras have higheraffinity to complementary DNA than unmodifiedoligonucleotides. Moreover, they can be used asnonradioactive probes with sensitivity similar toother nonradioactive methods.

Affinity chromatography using immobilized S-protein was used for the screening of affinity peptide ligands from two soluble peptide libraries. Peptide library I consisted of octamers with glycine (G) at both termini of each peptide, i.e. GXXXXXXG. The six center positions were constructed using random sequences of six L-amino acids (Y, N, F, E, V, and L). Peptide library II also consisted of octamers but with glycine and valine (V) at both termini of each peptide (GVZZZZVG). The four variable center positions of peptide library II were random sequences of 18 L-amino acids. Peptides that were retained specifically on the immobilized S-protein column were eluted by 2% acetic acid. The peptides in the acid eluate were further separated using reversed-phase HPLC. Each separated peptide fraction was collected and the peptide sequences deconvoluted by mass spectrometry (MS/MS). The screenings of peptide libraries I and II resulted in 12 and 7 affinity peptides, respectively. Eight out of the twelve peptides from peptide library I contained the clear consensus sequence NFEV. Peptide library II resulted in affinity peptides with the sequences GVNFEVVG, GVNFTVVG and GVFFEL(I)VG. The advantages and limitations of affinity chromatography in peptide library screening are discussed.

An oligopeptide containing three consecutive Thr residues mimicking the tandem repeat portion of MUC2 (PTTTPLK) was investigated for the acceptor specificity to UDP-N-acetyl-D-galactosamine:peptide N-acetylgalactosaminyltransferase isozymes, UDP-N-acetyl-D-galactosamine:peptide N-acetylgalactosaminyltransferase-T1, T2 and T3. The enzymatic reaction products were fractionated by the reversed-phase high performance liquid chromatography, then characterized by matrix-assisted laser desorption ionization time of flight mass spectrometry and by a peptide sequencing analysis. A maximum of two, one or three N-acetyl-D-galactosamine residues was transferred by UDP-N-acetyl-D-galactosamine:peptide N-acetylgalactosaminyltransferase-T1, T2 or T3, respectively. The preferential orders of N-acetyl-D-galactosamine incorporation were Thr-2, then Thr-4 for UDP-N-acetyl-D-galactosamine:peptide N-acetylgalactosaminyltransferase-T1, Thr-2 for UDP-N-acetyl-D-galactosamine:peptide N-acetylgalactosaminyltransferase-T2 and Thr-4, Thr-3, then Thr-2 for UDP-N-acetyl-D-galactosamine:peptide N-acetylgalactosaminyltransferase-T3.

Peptide mass mapping using matrix-assisted laser desorption/ionization (MALDI) mass spectrometry in conjunction with interrogation of sequence databases is a powerful tool for the identification of proteins. Glycosylated proteins often yield poor MALDI peptide maps due to shielding of proteolytic cleavage sites and the presence of modified peptides. Here we demonstrate that enzymatic removal of N-linked glycans with simultaneous partial (50%) 18O-labeling of glycosylated asparagine residues prior to proteolysis and MALDI peptide mass mapping can overcome these problems. As a result, more peptides are observed in MALDI spectra which, in turn, increases the specificity of subsequent database searches. Furthermore, the detection of a labeled peptide directly translates into partial sequence information as N-linked carbohydrates are exclusively attached to asparagine residues that form part of the NXS/T sequence. The mass of the formerly glycosylated peptide together with the NXS/T sequence pattern represents a discriminating criterion for database searching which, on average, increases the search specificity by a factor of 100. This procedure allows the unambiguous identification of glycoproteins that would otherwise require sequencing and, at the same time, enables the identification of N-glycosylation sites with higher sensitivity than previously possible.

Dissected tissue pieces of the pituitary pars intermedia from the amphibian Xenopus laevis was directly subjected to matrix-assisted laser desorption/ionization (MALDI) mass analysis. The obtained MALDI peptide profile revealed both previously known and unexpected processing products of the proopiomelanocortin gene. Mass spectrometric peptide sequencing of a few of these neuropeptides was performed by employing MALDI combined with postsource decay (PSD) fragment ion mass analysis. The potential of MALDI-PSD for sequence analysis of peptides directly from unfractionated tissue samples was examined for the first time for the known desacetyl-alpha-MSH-NH2 and the presumed vasotocin neuropeptide. In addition, the sequence of an unknown peptide which was present in the pars intermedia tissue sample at mass 1392.7 u was determined. The MALDI-PSD mass spectrum of precursor ion 1392.7 u contained sufficient structural information to uniquely identify the sequence by searching protein sequence databases. The determined amino acid sequence corresponds to the vasotocin peptide with a C-terminal extension of Gly-Lys-Arg ("vasotocinyl-GKR"), indicating incomplete processing of the vasotocin precursor protein in the pituitary pars intermediate of X. laevis. Both vasotocin and vasotocinyl-GKR are nonlinear peptides containing a disulfide (S-S) bridge between two cysteine residues. Interpretation of the spectra of these two peptides reveals three different forms of characteristic fragment ions of the cysteine side chain: peptide-CH2-SH (regular mass of Cys-containing fragment ions), peptide-CH2-S-SH (regular mass + 32 u) and peptide = CH2 (regular mass -34 u) due to cleavage on either side of the sulfur atoms.

Development of the strategies for assembling multiple kinds of peptide segments would give new possibilities for the de novo design of functional proteins. We will introduce our approach for the selective assembly of helical peptide segments on a peptide template to give four-helix-bundle proteins comprising individual helices.

SeqMS, a software program designed for the automated interpretation of high-energy collision-induced dissociation (CID) mass spectra of singly protonated peptides ionized by fast atom bombardment, has been developed. The software is capable of probing the sequence of an unknown peptide, and even of certain modified peptides. The program, compiled for WINDOWS95 or NT, also permits the retrieval of raw data and the reconstruction of the spectra on a user-friendly graphical interface with the aid of several tools for processing the spectra, which include setting multiple threshold levels and automatic peak detection. SeqMS is capable of generating candidate sequences, based on the detected peaks, and of displaying the resulting assignments for each candidate in a spectrum or in tabular form. The software has the following capabilities: 1) the ions derived from backbone and side-chain fragmentations, internal and immonium ions, and side-chain loss ions can be used for calculation; 2) 18O-labeling of a peptide at the C terminus, a methodology which was developed to differentiate N-terminal from C-terminal ions, is applicable as an optional setting; 3) modified amino acids and N- or C-terminal blocking groups are taken into account for calculation according to the user's setting in a library; 4) amino acid composition and partial or complete amino acid sequence of a peptide can be used as input for calculation; 5) the assignments of signal output in a spectrum can be graphically edited, and then re-calculated based on the edited peaks. The efficacy of the program is demonstrated by testing 74 high-energy CID spectra, obtained using a four-sector instrument, of synthetic, proteolytic, and biologically active peptides, some of which contain modified groups.

In an effort to gain an understanding of the value of the information in different mass spectrometric measurements for protein identification, the genome of Saccharomyces cerevisiae was studied in silico. We calculate how constraining the knowledge of the mass of a proteolytic peptide is as a function of mass and mass accuracy. We also assess the value for protein identification of additional information concerning a proteolytic peptide, including the presence or absence of a given amino acid, the number of exchangeable hydrogens, the N-terminal sequence, and the masses of mass spectrometrically produced fragment ions. Knowledge of the relative value of these different constraints is useful in the design of efficient protein identification experiments. Finally, we describe a software tool, PepFrag, for searching protein and DNA sequence databases that can use different types of mass spectrometric information to restrict the search.

A high molecular weight fraction of a HeLa cell nuclear extract containing nearly 1100 identified proteins was cross-linked with bis(succinimidyl)-3-azidomethyl glutarate (BAMG). The azido group in cross-linked peptides can be reduced to an amine group. Reduction enables isolation of cross-linked peptides by diagonal strong cation exchange chromatography. Collision-induced dissociation (CID) of reduced cross-linked peptides shows abundant cleavage of the cross-link amide bonds, along with the cleavage of peptide bonds of the composing peptide pair. A defined relationship exists between the sum of the masses of a pair of cleavage products and the mass of the parent compound. This relationship enables accurate mass determination of the two composing peptides. With this knowledge, the identity of the pair of peptides in a cross-link is revealed at an extremely low false discovery rate by peptide fragment fingerprinting with MS1MS2 data from the entire human sequence databases with a conventional search engine for peptide identification. Our approach resulted in identification of 229 intraprotein and 18 interprotein cross-links.Biological significanceMapping protein-protein interactions in complex samples like digests of in vitro cross-linked extracts, by interrogation of entire species specific sequence database with tandem mass spectrometric data may yield repositories of cross-linked peptides. Results will reveal interactions between proteins, the identity of which may lead to new hypotheses about molecular mechanisms and regulations of biological function, or new targets for drug development.In this paper we describe a new analytical strategy that improves existing approaches of cross-link mapping in complex samples. The cross-linker that we have designed and synthesized for our approach is membrane permeable. This opens avenues for in vivo cross-linking for better understanding of dynamic protein complex topologies involved in many biological processes.

Two recombinant proteins derived by thrombin cleavage of a fusion protein between glutathione-S-transferase and CP10 (Chemotactic protein 10 kDa) were separated by C4 reversed-phase high-performance liquid chromatography (RP-HPLC). Both proteins were recognised by a polyclonal antibody to native CP10 following sodium dodecyl sulphate/polyacryamide gel electrophoresis (SDS/PAGE) and Western blotting. The major form (approximately 90%) had a mass of 10308 Da, by electrospray mass spectrometry (ESI-MS), which compared well with the theoretical mass of rCP10 (10307.6 Da) whereas the minor component (approximately 10%) had a mass of 11333 Da, 1025 mass units greater than expected. One sequence was obtained by N-terminal sequencing, suggesting that the N-terminus was not modified. The mass of peptides isolated after Asp-N digestion and C18 RP-HPLC were determined by ESI-MS and each assigned a probable sequence based on the expected peptide man of rCP10. The mutant protein produced one additional peak at 10.0 min with mass 1639 Da and the sequence DSHKEQQRGIPGNSS by Edman degradation. The first 5 amino acids corresponded to the last 5 C-terminal amino acids of rCP10. Analysis of the cDNA sequence of the expression vector used to produce rCP10 indicated that the 10 additional C-terminal amino acids were translated after the insertion of glutamine at the normal TAG stop codon. Another stop codon (TGA) located 27 base pairs downstream halts translation. The calculated mass of the mutant protein is 11332.7 Da, in good agreement with the experimental mass. Readthrough occurs in strains of E. coli (eg JPA101) with the amber mutation supE, and this allowed substitution of glutamine at TAG codons in approximately 5-10% of transcripts.

Proteins were digested in normal and highly 18O-enriched water using proteases commonly employed for protein sequencing. The extent of 18O incorporation into the resulting peptide fragments was characterized by electrospray ionization (ESI) and matrix-assisted laser desorption/ionization (MALDI) mass spectrometry (MS). The endoproteinases trypsin, Lys-C and Glu-C incorporate two atoms of 18O, resulting in a mass shift of +4 D for the peptide fragments. This indicates that, following proteolytic cleavage, peptide products continue to interact with these proteases and undergo repeated binding/hydrolysis cycles, resulting in complete equilibration of both oxygens in the carboxy terminus of the fragments with oxygen from solvent water. In contrast, chymotrypsin and Asp-N incorporate only one atom of 18O, resulting in a mass shift of +2 D, indicating that after the cleavage step these proteases do not accept the peptides as substrates. In addition, it was found that the proteases trypsin, Glu-C, and Lys-C exhibit minor or nontypical sequence specificities, resulting in unexpected peptide fragments. These fragments incorporate only one 18O atom, indicating that they do not undergo further binding/hydrolysis cycles with the enzyme. Thus, it is possible to discriminate between enzyme-typical peptide fragments with mass shifts of +4 D and nontypical fragments with mass shifts of only +2 D. Based on these observations, protein digest strategies are described for the generation of 1:1 ion doublets spaced either by 2 or 4 D. In addition, the C-terminus of a protein can be identified by the absence of an ion doublet in the corresponding peptide fragment. In protein sequencing by mass spectrometry, digest protocols generating ion doublets provide the most clear-cut analytical results for the recognition of ion series in ESI-MS/MS and MALDI post-source decay (PSD) product ion spectra. Only the mass spectrometric fragment ions of a C-terminal series show ion doublets spaced either by 2 or 4 D, whereas the fragment ions belonging to an N-terminal series remain unshifted. This assignment unequivocally reveals the direction of the identified sequence.

Mass spectrometric peptide mapping of proteins isolated by polyacrylamide gel electrophoresis is a rapid method for identifying proteins in sequence databases. A majority of tryptic peptide maps were found to contain pairs of peptide ion peaks separated by the molecular weight of the lysyl or arginyl residue. These peaks originate from amino acid sequence patterns such as Lys-Lys where trypsin has cleaved C-terminals to either one of the lysines. The peptide mass and the pattern define an N- or C-terminal sequence tag. Searching sequence databases by such a sequence tag results in only a moderate number of matches and significantly reduces the number of database matches when used in combination with a peptide mass map. Two N- or C-terminal sequence tags alone unambiguously identify a protein in most cases. The technique discussed here is simple, does not require additional measurements, and increases the percentage of protein samples that can be identified by their mass maps alone. N-Terminal peptide sequence tags for database searching can also be generated by manual one-step Edman degradation of the unseparated peptide mixture.

The motif for peptide binding to monoclonal antibody mAb A16, which is known to be directed against glycoprotein D of Herpes simplex virus type 1, was determined using two dedicated peptide libraries. As a starting point for this study we used an A-16 binding lead sequence, which had previously been obtained from a phage display peptide library (Schellekens et al., 1994). Binding studies with different length variants of this peptide identified a 12mer as a suitable lead compound for our library study. Two incomplete dedicated resin-bound synthetic peptide libraries were generated. Both consisted of 2 x 10(6) 12mers, in which positions were alternately fixed (amino acids identical to the lead sequence) and random. The libraries were screened with mAb A16 and beads with binding peptides were sequenced using Edman degradation. This resulted in a unique peptide binding motif, essentially comprising a 7mer core sequence. Comparison of the sequence of the natural epitope with the binding motif revealed that its sequence was identical to the motif except for one position. Substitution of a methionine in the natural epitope by a tyrosine or a phenylalanine at that position, as dictated by the motif, resulted in a peptide with an affinity for binding to mAb A16 about 50 times higher than that of the natural epitope. Thus, if a lead sequence is available, the use of incomplete, dedicated synthetic peptide libraries provides a fast and powerful tool for the detection of high affinity peptides.