Search

A monolith representing 5420 14C yr of peat accumulation was collected from a blanket bog at Myrarnar, Faroe Islands. The maximum Hg concentration (498 ng/g at a depth of 4.5 cm) coincides with the maximum concentration of anthropogenic Pb (111 μg/g). Age dating of recent peat accumulation using 210Pb (CRS model) shows that the maxima in Hg and Pb concentrations occur at AD 1954 ± 2. These results, combined with the isotopic composition of Pb in that sample (206Pb/207Pb = 1.1720 ± 0.0017), suggest that coal burning was the dominant source of both elements. From the onset of peat accumulation (ca. 4286 BC) until AD 1385, the ratios Hg/Br and Hg/Se were constant (2.2 ± 0.5 × 10-4 and 8.5 ± 1.8 × 10-3, respectively). Since then, Hg/Br and Hg/Se values have increased, also reaching their maxima in AD 1954. The age date of the maximum concentrations of anthropogenic Hg and Pb in the Faroe Islands is consistent with a previous study of peat cores from Greenland and Denmark (dated using the atmospheric bomb pulse curve of 14C), which showed maximum concentrations in AD 1953. The average rate of atmospheric Hg accumulation from 1520 BC to AD 1385 was 1.27 ± 0.38 μg/m2/yr. The Br and Se concentrations and the background Hg/Br and Hg/Se ratios were used to calculate the average rate of natural Hg accumulation for the same period, 1.32 ± 0.36 μg/m2/yr and 1.34 ± 0.29 μg/m2/yr, respectively. These fluxes are similar to the preanthropogenic rates obtained using peat cores from Switzerland, southern Greenland, southern Ontario, Canada, and the northeastern United States. Episodic volcanic emissions and the continual supply of marine aerosols to the Faroe Islands, therefore, have not contributed significantly to the Hg inventory or the Hg accumulation rates, relative to these other areas. The maximum rate of Hg accumulation was 34 μg/m2/yr. The greatest fluxes of anthropogenic Hg accumulation calculated using Br and Se, respectively, were 26 and 31 μg/m2/yr. The rate of atmospheric Hg accumulation in 1998 (16 μg/m2/yr) is comparable to the values recently obtained by atmospheric transport modeling for Denmark, the Faroe Islands, and Greenland.

To quantify the effects of human activities on atmospheric deposition of mercury in eastern Canada, an improved understanding of the natural variations of the concentrations, fluxes and sources of Hg over a long period of time is required. Peat cores from 3 sites in southern Ontario were used to reconstruct changes in atmospheric mercury accumulation rates for the past 10000 years. The net mercury accumulation rates and excess mercury (mainly anthropogenic) were calculated using the long-term average Hg/Br and Hg/Se. The average background mercury accumulation rate during the pre-anthropogenic period was 1.4±1.0 μg/m 2 .yr. An excess of Hg was observed only once during that period, probably reflecting a change in climate. Mercury contamination from anthropogenic sources began about AD 1475 at the Luther Bog, corresponding to extensive biomass burning for agricultural activities by Native North Americans. During the late 17 th and 18 th centuries, deposition of anthropogenic Hg was at least equal to that of Hg from natural sources. Hg pollution increased again at the beginning of the 19 th century. The maximum increase (up to 30 times) compared to background occurred during the 1950s, when the anthropogenic component represented up to 85% of the total atmospheric mercury deposition.

Traditional peat sample preparation methods such as drying at high temperatures and milling may be unsuitable for Hg concentration determination in peats due to the possible presence of volatile Hg species, which could be lost during drying. Here, the effects of sample preparation and natural variation on measured Hg concentrations are investigated. Slight increases in mercury concentrations were observed in samples dried at room temperature and at 30 degrees C (6.7 and 2.48 ng kg(-1) h(-1), respectively), and slight decreases were observed in samples dried at 60, 90 and 105 degrees C (2.36, 3.12 and 8.52 ng kg(-1) h(-1), respectively). Fertilising the peat slightly increased Hg loss (3.08 ng kg(-1) h(-1) in NPK-fertilised peat compared to 0.28 ng kg(-1) h(-1) in unfertilised peat, when averaged over all temperatures used). Homogenising samples by grinding in a machine also caused a loss of Hg. A comparison of two Hg profiles from an Arctic peat core, measured in frozen samples and in air-dried samples, revealed that no Hg losses occurred upon air-drying. A comparison of Hg concentrations in several plant species that make up peat, showed that some species (Pinus mugo, Sphagnum recurvum and Pseudevernia furfuracea) are particularly efficient Hg retainers. The disproportionally high Hg concentrations in these species can cause considerable variation in Hg concentrations within a peat slice. The variation of water content (1.6% throughout 17-cm core, 0.97% in a 10 x 10 cm slice), bulk density (40% throughout 17-cm core, 15.6% in a 10 x 10 cm slice) and Hg concentration (20% in a 10 x 10 cm slice) in ombrotrophic peat were quantified in order to determine their relative importance as sources of analytical error. Experiments were carried out to determine a suitable peat analysis program using the Leco AMA 254, capable of determining mercury concentrations in solid samples. Finally, an analytical protocol for the determination of Hg concentrations in solid peat samples is proposed. This method allows correction for variation in factors such as vegetation type, bulk density, water content and Hg concentration in individual peat slices. Several subsamples from each peat slice are air dried, combined and measured for Hg using the AMA254, using a program of 30 s (drying), 125 s (decomposition) and 45 s (waiting). Bulk density and water content measurements are performed on every slice using separate subsamples. Udgivelsesdato: 2002-Jun-20

A peat core from Lindow bog near Manchester, England, was precisely cut into 2 cm slices to provide a high-resolution reconstruction of atmospheric Pb deposition. Radiocarbon and (210)Pb age dates show that the peat core represents the period ca. 2000 BC to AD 1800. Eleven radiocarbon age dates of bulk peat samples reveal a linear age-depth relationship with an average temporal resolution of 18.5 years per cm, or 37 years per sample. Using the Pb/Ti ratio to calculate the rates of anthropogenic, atmospheric Pb deposition, the profile reveals Pb contamination first appearing in peat samples dating from ca. 900 BC which clearly pre-date Roman mining activities. Using TIMS, MC-ICP-MS, and SF-ICP-MS to measure the isotopic composition of Pb, the (208)Pb/(206)Pb and (206)Pb/(207)Pb data indicate that English ores were the predominant sources during the pre-Roman, Roman, and Medieval Periods. The study shows that detailed studies of peat profiles from ombrotrophic bogs, using appropriate preparatory and analytical methods, can provide new insight into the timing, intensity, and predominant sources of atmospheric Pb contamination, even in samples dating from ancient times.

Peat cores from three bogs in southern Ontario provide a complete, quantitative record of net rates of atmospheric Hg accumulation since pre-industrial times. For comparison with modern values, a peat core extending back 8000 years was used to quantify the natural variations in Hg fluxes for this region, and their dependence on climatic change and land use history. The net mercury accumulation rates were separated into "natural" and "excess" components by comparing the Hg/Br ratios of modern samples with the long-term, pre-anthropogenic average Hg/Br. The average background mercury accumulation rate during the pre-anthropogenic period (from 5700 years BC to 1470 AD) was 1.4 +/- 1.0 microg m(-2) per year (n = 197). The beginning of Hg contamination from anthropogenic sources dates from AD 1475 at the Luther Bog, corresponding to biomass burning for agricultural activities by Native North Americans. During the late 17th and 18th centuries, deposition of anthropogenic Hg was at least equal to that of Hg from natural sources. Anthropogenic inputs of Hg to the bogs have dominated continuously since the beginning of the 19th century. The maximum Hg accumulation rates decrease in the order Sifton Bog, in the City of London, Ontario (141 microg Hg m(-2) per year), Luther Bog in an agricultural region (89 microg Hg m(-2) per year), and Spruce Bog which is in a comparatively remote, forested region (54 microg Hg m(-2) per year). Accurate age dating of recent peat samples using the bomb pulse curve of 14C shows that the maximum rate of atmospheric Hg accumulation occurred during AD 1956 and 1959 at all sites. In these (modern) samples, the Hg concentration profiles resemble those of Pb, an element which is known to be immobile in peat bogs. The correlation between these two metals, together with sulfur, suggests that the predominant anthropogenic source of Hg (and Pb) was coal burning. While Hg accumulation rates have gone into strong decline since the late 1950's, Hg deposition rates today still exceed the average natural background values by 7 to 13 times.

In this paper, we present the first comprehensive long-term record of preanthropogenic rates of atmospheric mercury accumulation in dated peat deposits for the High Arctic of Canada. Geochemical studies of two peat hummocks from Bathurst Island, Nunavut reveal substantial inputs from soil dust (titanium), marine aerosols (bromine), and mineral-water interactions (uranium). Mercury, however, was supplied to these peat mounds exclusively by atmospheric deposition. Mercury concentration measurements and age dating of the peat profiles indicate rather constant natural "background" mercury flux of ca. 1 microgram per square meter per year from 5900 to 800 calibrated years BP. These values are well within the range of the mercury fluxes reported from other Arctic locations, but also by peat cores from southern Canada that provide a record of atmospheric Hg accumulation extending back 8000 years. Thus, preanthropogenic Hg fluxes in the Arctic were not significantly different from atmospheric Hg fluxes in the temperate zone. In preindustrial times, therefore, the High Arctic was no more important as a sink for global atmospheric mercury than was the temperate zone.

For detailed reconstructions of atmospheric metal deposition using peat cores from bogs, a comprehensive protocol for working with peat cores is proposed. The first step is to locate and determine suitable sampling sites in accordance with the principal goal of the study, the period of time of interest and the precision required. Using the state of the art procedures and field equipment, peat cores are collected in such a way as to provide high quality records for paleoenvironmental study. Pertinent field observations gathered during the fieldwork are recorded in a field report. Cores are kept frozen at -18 degree C until they can be prepared in the laboratory. Frozen peat cores are precisely cut into 1 cm slices using a stainless steel band saw with stainless steel blades. The outside edges of each slice are removed using a titanium knife to avoid any possible contamination which might have occurred during the sampling and handling stage. Each slice is split, with one-half kept frozen for future studies (archived), and the other half further subdivided for physical, chemical, and mineralogical analyses. Physical parameters such as ash and water contents, the bulk density and the degree of decomposition of the peat are determined using established methods. A subsample is dried overnight at 105 degree C in a drying oven and milled in a centrifugal mill with titanium sieve. Prior to any expensive and time consuming chemical procedures and analyses, the resulting powdered samples, after manual homogenisation, are measured for more than twenty-two major and trace elements using non-destructive X-Ray fluorescence (XRF) methods. This approach provides lots of valuable geochemical data which documents the natural geochemical processes which occur in the peat profiles and their possible effect on the trace metal profiles. The development, evaluation and use of peat cores from bogs as archives of high-resolution records of atmospheric deposition of mineral dust and trace elements have led to the development of many analytical procedures which now permit the measurement of a wide range of elements in peat samples such as lead and lead isotope ratios, mercury, arsenic, antimony, silver, molybdenum, thorium, uranium, rare earth elements. Radiometric methods (the carbon bomb pulse of (14)C, (210)Pb and conventional (14)C dating) are combined to allow reliable age-depth models to be reconstructed for each peat profile.

There is a growing interest in the atmospheric transport, deposition, and accumulation of anthropogenic Hg in the Arctic. To quantify the impact of industrial Hg emissions, the natural rate of atmospheric Hg accumulation must be known. Mercury concentration measurements and age dating of peat from the Canadian Arctic show that natural background Hg flux rather constant (ca. 1 microgram per sq. m per yr.) throughout the past 6000 years. Mercury concentrations in surface peat layers are much higher, but chronology of these changes cannot be interpreted until more age dates are available. The elevated Hg concentrations in surface layers, however, are out of proportion with Br and Se, suggesting that there has been a significant human impact. Peat cores from southern Canada provide a record of atmospheric Hg accumulation extending back nine thousand years, with similar background fluxes. Thus, pre-anthropagenic Hg fluxes in the High Arctic were not significantly different from atmospheric Hg fluxes in the temperate Zone.