Search

The non‐radiative recombination at the interfaces of perovskite solar cells (PSCs) is a crucial issue that limits the efficiency and stability of the devices. State‐of‐the‐art surface passivation strategies usually utilize alkyl ammonium halides to suppress the non‐radiative recombination of PSCs, but their high surface reactivity leads to the transformation into 2D perovskites under working conditions, limiting the passivation effect and the charge transport of PSCs. Herein, a non‐halide ionic salt 1‐naphthylmethylammonium formate (NMACOOH) is synthesized for surface passivation of perovskite films. In contrast to the traditional 1‐naphthylmethylammonium iodide, NMACOOH treatment hinders the formation of 2D perovskite and forms a thermally stable PbI2‐NMACOOH adduct on the perovskite surface. Surface characterization reveals that NMA+ can passivate the cation vacancies of the 3D perovskite while HCOO− passivates the metallic Pb0 and halide‐vacancy defects. Therefore, the non‐radiative recombination of PSCs is dramatically suppressed and a high open‐circuit voltage of 1.19 V is obtained. Finally, PSCs with high efficiency of 24.75% and improved long‐term stability (98% of the initial efficiency after 1800‐h storage) are obtained. Moreover, the NMACOOH‐passivated devices also show robust operational stability, retaining 83% of the initial efficiency after working for 658 h under continuous one‐sun illumination. [ABSTRACT FROM AUTHOR]

Designing functional fullerenes with roles beyond defect passivation and electron‐transporting for perovskite solar cells (PSCs) is essential to the development of fullerenes and PSCs. Here, the authors design and synthesize a functional fullerene, FPD, composed of a C60 cage, a porphyrin ring, and three pentafluorophenyl groups. The structure features of FPD enable it can form chemical interactions with the perovskite lattices. These interactions enhance the defect passivation effect and prevent the decomposition of perovskite under irradiation. As a result, the FPD‐based device yields an improved power conversion efficiency of 23% with substantially enhanced operational stability (T80 > 1500 h). Furthermore, once got damaged, the FPD can prevent lead leakage by forming a stable and water‐insoluble complex (FPD‐Pb). Their findings provide a novel strategy to achieve high‐performance and eco‐friendly PSCs with functional fullerene materials. [ABSTRACT FROM AUTHOR]

It is challenging to passivate defects that are buried in the depth of perovskite films; most of the reported passivation methods cannot reach the deep defects. Herein, methanol is adopted as a dual‐functional reagent to not only act as a solvent but also help the dissolved ions penetrate the depth of perovskite films. By treating the as‐prepared perovskite films with CsBr/methanol solution, Br− ions can react with the undercoordinated Pb2+, and Cs+ ions can fill in the cation vacancies. This strategy enables surface and bulk defects passivation to be achieved simultaneously. The nonradiative recombination of the double‐passivated devices is significantly suppressed and the migration of charged defects is remarkably hindered. As a result, an improved power conversion efficiency of 19.5% and an open‐circuit voltage of 1.183 V is achieved. Moreover, the passivated device can retain ≈80% of the initial efficiency after working for 500 h at maximum power point under 1‐sun illumination, whereas the pristine device reaches 80% of the initial efficiency after only 90 h. This work demonstrates that surface and bulk defects passivation is critical to improve the efficiency and long‐term operational stability of the perovskite solar cells. [ABSTRACT FROM AUTHOR]

Fullerene derivatives, especially after purposely functionalization, have potential to efficiently passivate interfacial defects between perovskites and electron transport layers. In this work, a fullerene derivative with amine functional group, 2,5‐diphenyl C60 fulleropyrrolidine (DPC60), is synthesized and employed as an interfacial layer between a perovskite and SnO2 in planar perovskite solar cells (PSCs). The cis‐configuration and the specific amine group of DPC60 effectively enhance the chemical interaction between the perovskite and DPC60, promoting the passivation of perovskite defects at the interface. The suitable energy level of DPC60 and the improved conductivity of the SnO2/DPC60 film facilitate the electron extraction from the perovskite layer. As a result, PSCs incorporated with DPC60 reach a PCE of 20.4% with high reproducibility, which is much higher than that of the bare SnO2 based devices (18.8%). Furthermore, the hydrophobic DPC60 layer suppresses heterogeneous nucleation and improves the crystallinity of the perovskite film, resulting in better device stability, retaining 82% of its initial efficiency after 200 h of 1 sun continuous irradiation and thermal ageing (55 ± 5 °C). [ABSTRACT FROM AUTHOR]