Search

A novel wideband bandstop filter is proposed in this paper. Using one uniform impedance resonator and two stepped impedance resonators, five transmission zeros are introduced in the stopband. Appropriate positioning of these zeros ensures the high selectivity and flat rejection level of the stopband. The bandwidth of the filter can be conveniently controlled by the characteristic impedances of the connecting lines and resonators. A complete analytic analysis is proposed to fully control the positions of transmission zeros, and the design equations and design rules for the bandstop filter are given in detail by using the lossless transmission line model. To illustrate the concept, a wideband bandstop filter with center frequency at 2 GHz and rejection level below 20 dB is fabricated. Theoretical, simulated, and measured results are found in good agreement with each other, and the measured 20-dB rejection bandwidth is as wide as 150%. [ABSTRACT FROM PUBLISHER]

Compact microstrip low-pass filters (LPFs) with ultrawide stopband based on a defected ground structure (DGS) and their design procedures are presented in this paper. A key merit of the filter configuration is that the selectivity of the LPFs can be conveniently controlled, whereas the bandwidth is fixed. The LPFs are realized using open-circuited uniform impedance stubs and stepped-impedance stubs (SISs). The position of the transmission zeros can be freely controlled by tuning the impedance ratio of the SISs. To expand the stopband, the dumbbell DGS is used to suppress the spurious passbands of the LPFs. Two demonstration filters with a cutoff frequency at 1 GHz have been designed, fabricated, and measured. The measured results indicate good performance: broad stopband ( >15 fc or 20~fc ), low passband insertion loss (<0.3 dB), compact size, and sharp skirt characteristic. [ABSTRACT FROM PUBLISHER]

This letter reports a new kind of matching network for quad-channel diplexers. The matching network is comprised by some open- and short-circuited transmission lines, which can be chosen based on the design graph. The impact of loading resonators on the network is discussed. The diplexer can be easily realized by the combination of different bandpass filters without complicated tuning. To illustrate the concept, one quad-channel diplexer is designed, fabricated, and measured. Simulated and measured results are found to be in good agreement with each other. [ABSTRACT FROM PUBLISHER]

In this letter, stepped-impedance resonators are used in coaxial cavity filter to generate dual-band response. Two key merits of the proposed filter are the helical feeding structure and the introduction of mixed coupling for coupling control and generation of transmission zero. The helical feeding structure makes it possible to conveniently control the external quality factors of two bands. To illustrate the concept, a third-order dual-band coaxial cavity filter is designed, fabricated and measured. The measured results are in good agreement with the full-wave simulation results. [ABSTRACT FROM PUBLISHER]