Search

An intensive measurement campaign was conducted in Xi'an, China from December 2012-January 2013 to investigate the chemical composition, formation, and optical properties of PM 1 . The PM 1 mass concentration (average = 138.8 ± 83.2 μg m -3 ) accounted for ∼50% of the PM 2.5 mass. Organic aerosols (OA) and secondary inorganic aerosols (SIA) were the most abundant PM 1 components, contributing 53.0% and 35.0% to the mass, respectively. Both primary emissions and aqueous-phase oxidation of secondary aerosols played roles in the pollution episodes. The average light scattering and absorption coefficients during the campaign were 805 ± 581 Mm -1 and 123 ± 96 Mm -1 , respectively. Both the mass scattering and mass absorption efficiencies for PM 1 were higher than that for PM 2.5-1 , indicating stronger ability of light extinction for the smaller particles at visible wavelengths compared with the larger ones. The contributions of aerosol species to light extinction coefficients under two visibility conditions were estimated based on multiple linear regression models, and the OA was found to be the largest contributor to light extinction in both cases. A larger contribution of SIA to light extinction for visibility <5 km demonstrated its greater impacts on visibility during heavy pollution conditions. These findings provide insights into the importance of submicron particles for pollution and visibility degradation in northwestern China., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

An intensive sampling campaign of airborne fine particles (PM 2.5 ) was conducted at Sanya, a coastal city in Southern China, from January to February 2012. Chemical analyses and mass reconstruction were used identify potential pollution sources and investigate atmospheric reaction mechanisms. A thermodynamic model indicated that low ammonia and high relative humidity caused the aerosols be acidic and that drove heterogeneous reactions which led to the formation of secondary inorganic aerosol. Relationships among neutralization ratios, free acidity, and air-mass trajectories suggest that the atmosphere at Sanya was impacted by both local and regional emissions. Three major transport pathways were identified, and flow from the northeast (from South China) typically brought the most polluted air to Sanya. A case study confirmed strong impact from South China (e.g., Pearl River Delta region) (contributed 76.8% to EC, and then this result can be extended to primary pollutants) when the northeast winds were dominant. The Weather Research Forecasting Black carbon model and trace organic markers were used to apportion local pollution versus regional contributions. Results of the study offer new insights into the atmospheric conditions and air pollution at this coastal city.

In this study, 30 elements in fine particulate matter (PM2.5) were measured in 18 Chinese cities in 2013. Elemental pollution in northern, southwest, and central China were severe, attributing to excessive coal and biomass combustion in these regions. The concentrations of S, Cl, and K in these areas were 8.21 ± 3.90, 4.03 ± 1.96, and 1.59 ± 0.613 μg/m3, respectively, which were 1.6–2.7 times higher than those in other regions of China. In addition, the industrial emissions in northeast and north China were large, leading to the elevated heavy metal concentration of 1.32 ± 1.17 μg/m3, especially Zn, Pb, Cr, Cd, and Br. Soil dust was the highest in northwest China among the five regions with the concentration of crustal elements of 6.37 ± 4.51 μg/m3. Moreover, although the levels of elemental concentration in east and southeast China were relatively acceptable, regulators must pay attention to elevated level of V (0.009 ± 0.006 μg/m3) in these areas. Compared with 2003, several elements have deteriorated in some cities. For example, As increased by 70%, 18%, and 155% in Changchun, Beijing, and Jinchang, respectively. However, ~ 77% measured elements, e.g., Ti, Fe, and Pb markedly reduced in 2013, with reduction rates of 13–81%. These indicate that the government's policies related to particle-bound elements have shown certain positive environmental effects. For the health risks from the heavy metals in 2013, the non-cancer risks of As and Cd must not be neglected. The cancer risks of As and Pb were much higher than the international safety limit (10−4). More prominent health risks were found in southwest, central, and northwest China. Therefore, the government should accelerate the shift to cleaner energy in underdeveloped areas of China to obtain more environmental and health benefits. [ABSTRACT FROM AUTHOR]

Organic aerosol (OA) constitutes a large fraction of fine particulate matter (PM) in the urban air. However, the chemical nature and sources of OA are not well constrained. Quantitative analysis of OA is essential for understanding the sources and atmospheric evolution of fine PM, which requires accurate quantification of some organic compounds (e.g., markers). In this study, two analytical approaches, i.e., thermal desorption (TD) gas chromatography mass spectrometry (GC-MS) and solvent extract (SE) GC-MS, were evaluated for the determination of n-alkanes, polycyclic aromatic hydrocarbons (PAHs) and hopanes in ambient aerosol. For the SE approach, the recovery obtained is 89.3 %–101.5 %, the limits of detection (LODs) are 0.05–1.1 ng (1.5–33.9 ng m -3), repeatability is 3.5 %–14.5 % and reproducibility is 1.2 %–10.9 %. For the TD approach, the recovery is 57.2 %–109.8 %, the LODs are 0.1–1.9 ng (0.04–0.9 ng m -3), repeatability is 2.1 %–19.4 % and reproducibility is 1.1 %–12.9 %. Ambient aerosol samples were collected from Beijing, Chengdu, Shanghai and Guangzhou during the winter of 2013 and were analyzed by the two methods. After considering the recoveries, the two methods show a good agreement with a high correlation coefficient (R2 > 0.98) and a slope close to unity. The concentrations of n-alkanes, PAHs and hopanes are found to be much higher in Beijing than those in Chengdu, Shanghai and Guangzhou, most likely due to emissions from traffic and/or coal combustion for wintertime heating in Beijing. [ABSTRACT FROM AUTHOR]

Although stringent emission mitigation strategies have been carried out since 2013 in Beijing–Tianjin–Hebei (BTH), China, heavy haze with high levels of fine particulate matter (PM 2.5) still frequently engulfs the region during wintertime and the nitrate contribution to PM 2.5 mass has progressively increased. N2O5 heterogeneous hydrolysis is the most important pathway of nitrate formation at nighttime. In the present study, the WRF-Chem model is applied to simulate a heavy haze episode from 10 to 27 February 2014 in BTH to evaluate contributions of N2O5 heterogeneous hydrolysis to nitrate formation and effects of organic coating. The model generally performs reasonably well in simulating meteorological parameters, air pollutants, and aerosol species against observations in BTH. N2O5 heterogeneous hydrolysis with all the secondary organic aerosol assumed to be involved in coating considerably improves the nitrate simulations compared to the measurements in Beijing. On average, organic coating decreases nitrate concentrations by 8.4 % in BTH during an episode, and N2O5 heterogeneous hydrolysis with organic coating contributes about 30.1 % of nitrate concentrations. Additionally, the reaction also plays a considerable role in the heavy haze formation, with a PM 2.5 contribution of about 11.6 % in BTH. Sensitivity studies also reveal that future studies need to be conducted to predict the organic aerosol hygroscopicity for accurately representing the organic coating effect on N2O5 heterogeneous hydrolysis. [ABSTRACT FROM AUTHOR]