Search

Maximum power point tracking (MPPT) through an effective control strategy increases the efficiency of solar panels under rapidly changing atmospheric conditions. Due to the nonlinearity of the I–V characteristics of the PV module, the Sliding Mode Controller (SMC) is considered one of the commonly used control approaches for MPPT in the literature. This paper proposed a Backstepping SMC (BSMC) method that ensures system stability using Lyapunov criteria. A fuzzy inference system replaces the saturation function, and a modified SMC is used for MPPT to ensure smooth behavior. The proposed Fuzzy BSMC (FBSMC) parameters are optimized using a Particle Swarm Optimization (PSO) approach. The proposed controller is tested through various case studies on account of MPP's dependence on temperature and solar radiation. The controller performance is assessed in partial shading conditions as well. The simulation results show that less settling time, a small error, and enhanced power extraction capability are achieved by applying the PSO-based FBSMC approach compared to the conventional BSMC- and ABC-based PI control presented in previous research in different scenarios. Moreover, the proposed approach provides faster adaptation to temperature and solar radiation variation, ensuring faster convergence to the MPP. Finally, the robustness of the proposed controller is validated by providing variation within the system components. The result of the proposed controller clearly indicates the lowest value of RMSE measured between PV voltage and the reference voltage, as well as the RMSE between PV power and maximum power. The results also show that the proposed MPPT controller exhibits the highest dynamic efficiency and mean power. [ABSTRACT FROM AUTHOR]

In this paper, a new hybrid TSA-PSO algorithm is proposed that combines tunicate swarm algorithm (TSA) with the particle swarm optimization (PSO) technique for efficient maximum power extraction from a photovoltaic (PV) system subjected to partial shading conditions (PSCs). The performance of the proposed algorithm was enhanced by incorporating the PSO algorithm, which improves the exploitation capability of TSA. The response of the proposed TSA-PSO-based MPPT was investigated by performing a detailed comparative study with other recently published MPPT algorithms, such as tunicate swarm algorithm (TSA), particle swarm optimization (PSO), grey wolf optimization (GWO), flower pollination algorithm (FPA), and perturb and observe (P&O). A quantitative and qualitative analysis was carried out based on three distinct partial shading conditions. It was observed that the proposed TSA-PSO technique had remarkable success in locating the maximum power point and had quick convergence at the global maximum power point. The presented TSA-PSO MPPT algorithm achieved a PV tracking efficiency of 97.64%. Furthermore, two nonparametric tests, Friedman ranking and Wilcoxon rank-sum, were also employed to validate the effectiveness of the proposed TSA-PSO MPPT method. [ABSTRACT FROM AUTHOR]

In the renewable energy sector, the extraction of parameters for solar photovoltaic (PV) cells is a widely studied area of research. Parameter extraction is a non-linear complex optimization problem for solar PV cells. In this research work, the authors have implemented the Tunicate swarm algorithm (TSA) to estimate the optimized value of the unknown parameters of a PV cell/module under standard temperature conditions. The simulation results have been compared with four different, pre-existing optimization algorithms: gravitational search algorithm (GSA), a hybrid of particle swarm optimization and gravitational search algorithm (PSOGSA), sine cosine (SCA), and whale optimization (WOA). The comparison of results broadly demonstrates that the TSA algorithm outperforms the existing optimization algorithms in terms of root mean square error (RMSE) and convergence rate. Furthermore, the statistical results confirm that the TSA algorithm is a better algorithm in terms of average robustness and precision. The Friedman ranking test is also carried out to demonstrate the competency and reliability of the implemented approach. [ABSTRACT FROM AUTHOR]

Parameter extraction of the photovoltaic cell is a highly nonlinear complex optimization problem. This article proposes a new hybrid version of whale optimization and particle swarm optimization algorithm to optimize the photovoltaic cell parameters. The exploitation ability of particle swarm optimization with adaptive weight function is implemented in the pipeline mode with a whale optimization algorithm to improve its exploitation capability and convergence speed. The performance of the proposed hybrid algorithm is compared with six different optimization algorithms in terms of root mean square error and rate of convergence. The simulation result shows that the proposed hybrid algorithm produces not only optimized parameters at different irradiation levels (i.e., 1000 W/m2, 870 W/m2, 720 W/m2, and 630 W/m2) but also estimates minimum root mean square error even at a low level of irradiations. Furthermore, the statistical analysis validates that the average accuracy and robustness of the proposed algorithm are better than other algorithms. The best values of root mean square error generated by the proposed algorithm are 7.1700 × 10 − 4 and 9.8412 × 10 − 4 for single-diode and double-diode models. It is observed that the estimated parameters based on the optimization process are highly consistent with the experimental data. [ABSTRACT FROM AUTHOR]