Search

Reusing agro-industrial waste does not only help to mitigate environmental impact but also enables valorization through the development of new products. The aim is to enhance the physical and mechanical properties of particleboard panels produced with Eucalyptus wood and different proportions of waste products—coconut fiber (Cocos nucifera L.). Physical properties (density, water absorption, and thickness swelling) and mechanical properties (static bending and internal bond resistance) were assessed, and panels reinforced with coconut fiber showed the best qualities with higher density, greater dimensional stability, and less water absorption. Static bending resistance and internal bond resistance also increased significantly. This demonstrated the potential of achieving compatible characteristics for civil construction and furniture production through the inclusion of waste material. The impact of this research is obtained from the utilization of an important agro-industrial residue in the manufacture of permanent composites. [ABSTRACT FROM AUTHOR]

The resistance of particleboards, made from wood, bamboo and rice husk, to fungi and termites was evaluated. Panels were composed of 100% wood (Eucalyptus grandis), 100% bamboo (Bambusa vulgaris), 100% rice husk (Oryza sativa), 50% wood and 50% bamboo; and 50% wood and 50% rice husk. Panels exposed to the decay the brown-rot fungus (Gloeophyllum trabeum, and the white-rot fungus (Trametes versicolor), and, in a choice feeding trial, to termites (Nasutitermes corniger). The rice husk particleboards had the highest resistance of all samples and the bamboo particleboards had the lowest resistance. T. versicolor fungi produced a larger mass loss in the particleboards than did G. trabeum. [ABSTRACT FROM AUTHOR]

The knowledge about lignocellulosic compounds strength to the attack of microorganisms is essential for preventing deterioration and also for knowing the correct usage of the material. Accordingly it was evaluated the natural resistance of wood panels made of particles of wood (Eucalyptus grandis) and/or bamboo (Bambusa vulgaris) to decay fungi. Particleboards were produced in laboratory, each of them with dimensions 50x50x0.95cm and density pre-set at 0.70g cm-3, in proportions of 100:0, 75:25, 50:50, 25:75 and 0:100 of wood and bamboo, respectively. The particles mass represented 91% of the dry mass of each panel while the remainder was formed by the urea-formaldehyde adhesive (8%) and paraffin (1%). The panels were tested in the laboratory and Gloeophyllum trabeum (brown rot) and Trametes versicolor (white rot) were used to determine the natural resistance to attack by wood decay fungi. It was observed that panels which were made with a mixture of particles of wood and bamboo were less resistant to attack by decay fungi. Panels that were made from bamboo or wood only showed similar biological resistance. Among fungi, T. versicolor was the one that attacked panels more severely. [ABSTRACT FROM AUTHOR]

Copyright of Silva Lusitana is the property of Unidade de Investigacao de Silvicultura e Productos Florestais and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)