Search

Electrochemical water splitting is a promising means to produce eco‐friendly hydrogen fuels. Inspired by the Mn4CaO5 cluster in nature, substantial works have been performed to develop efficient manganese (Mn)‐based heterogeneous catalysts. Despite improvements in catalytic activity, the underlying mechanism of the oxygen evolution reaction (OER) is not completely elucidated owing to the lack of direct spectroscopic evidence for the active Mn‐oxo moieties. We identify water oxidation intermediates on the surface of Mn3O4 nanoparticles (NPs) in the OER at neutral pH by in situ Raman spectroscopy. A potential‐dependent Raman peak was detected at 760 cm−1 and assigned to the active MnIV=O species generated during water oxidation. Isotope‐labeling experiments combined with scavenger experiments confirmed the generation of surface terminal MnIV=O intermediates in the Mn‐oxide NPs. This study provides an insight into the design of systems for the observation of reaction intermediates. [ABSTRACT FROM AUTHOR]

High-valent metal-oxo moieties have been implicated as key intermediates preceding various oxidation processes. The critical O–O bond formation step in the Kok cycle that is presumed to generate molecular oxygen occurs through the high-valent Mn-oxo species of the water oxidation complex, i.e., the Mn4Ca cluster in photosystem II. Here, we report the spectroscopic characterization of new intermediates during the water oxidation reaction of manganese-based heterogeneous catalysts and assign them as low-spin Mn(IV)-oxo species. Recently, the effects of the spin state in transition metal catalysts on catalytic reactivity have been intensely studied; however, no detailed characterization of a low-spin Mn(IV)-oxo intermediate species currently exists. We demonstrate that a low-spin configuration of Mn(IV), S = 1/2, is stably present in a heterogeneous electrocatalyst of Ni-doped monodisperse 10-nm Mn3O4 nanoparticles via oxo-ligand field engineering. An unprecedented signal (g = 1.83) is found to evolve in the electron paramagnetic resonance spectrum during the stepwise transition from the Jahn–Teller-distorted Mn(III). In-situ Raman analysis directly provides the evidence for Mn(IV)-oxo species as the active intermediate species. Computational analysis confirmed that the substituted nickel species induces the formation of a z-axis-compressed octahedral C4v crystal field that stabilizes the low-spin Mn(IV)-oxo intermediates. Understanding reaction intermediates provides a foundation for active electrocatalysts' design, but it remains elusive for heterogeneous electrocatalysts. Here, the authors report the spectroscopic characterization of low-spin Mn(IV)-oxo as the active intermediates during electrochemical water oxidation. [ABSTRACT FROM AUTHOR]

As the demand for energy has dramatically increased in the past decade, electrochemical water splitting has been regarded as an attractive approach to produce renewable hydrogen energy. However, large overpotentials of oxygen‐evolving reaction (OER) is a key bottleneck for practical application. Thus, water‐oxidizing electrocatalysts with low cost and high efficiency should be developed. Here, 5 nm‐sized Mn3O4 nanoparticles (NPs) are synthesized by a hydrothermal method, which is appropriate for large‐scale production. To further improve their performance, various 3d transition metal elements are successfully doped in Mn3O4 NPs. Ni‐doped Mn3O4 NPs exhibit the highest efficiency among the Mn3O4 NPs doped with various elements. Based on structural analysis, the Ni‐doping process leads to the lattice distortion of their tetragonal spinel structure and it strongly correlates with the enhancement of OER activity. The overpotential at the current density of 10 mA cm–2 is 524 and 458 mV for pristine and 5 at% doped Mn3O4 NPs under neutral condition. The heteroatom‐doping process in sub‐10 nm‐sized nanocatalysts is expected to be a promising methodology to induce distorted structure related to active species. Thus, it can be effective to improve catalytic performance of various heterogeneous nano‐catalysts. [ABSTRACT FROM AUTHOR]

Electrochemical water splitting is one of the ways to produce environmentally‐friendly hydrogen energy. Transition‐metal (TM)‐based catalysts have been attracting attention due to their low cost and abundance, but their insufficient activity still remains a challenge. Here, 4 nm Mn3O4 nanoparticles (NPs) are successfully synthesized and their electrochemical behavior is investigated. Using electrokinetic analyses, an identical water oxidizing mechanism is demonstrated between the 4 and 8 nm Mn3O4 NPs. In addition, it is confirmed that the overall increase in the active surface area is strongly correlated with the superb catalytic activity of the 4 nm Mn3O4 NPs. To further enhance the oxygen evolution reaction (OER) performance, Ni foam substrate is introduced to maximize the entire number of the NPs participating in OER. The 4 nm Mn3O4/Ni foam electrode exhibits outstanding electrocatalytic activity for OER with overpotential of 395 mV at a current density of 10 mA cm−2 under neutral conditions (0.5 m PBS, pH 7). [ABSTRACT FROM AUTHOR]

Photoelectrochemical (PEC) water splitting is a critical area of research since it promises the efficient generation of solar energy within chemical fuels. The biggest technical barrier in realizing efficient PEC water splitting remains the integration of an efficient inexpensive catalyst for water oxidation. Herein, a solution based method to synthesize hematite nanorods treated with cobalt phosphate and MnO nanoparticles overlayers is demonstrated, which significantly improves the water oxidation efficiency for this photoanode material. [ABSTRACT FROM AUTHOR]

The oxygen evolution reaction (OER) is considered a major bottleneck in the overall water electrolysis process. In this work, highly active manganese oxide nano-catalysts were synthesized via hot injection. Facile surface treatment generated Mn(III) species on monodisperse 10 nm MnO nanocrystals (NCs). Size dependency of MnO NCs on OER activity was also investigated. Surprisingly, the partially oxidized MnO NCs only required 530 mV @ 5 mA cm−2 under near neutral conditions. [ABSTRACT FROM AUTHOR]

Mn3(PO4)2·3H2O is precipitated from an equimolar solution of KH2PO4 in HEPES (4-(2-hydroxyethyl)-1-piperazineethanesulfonic acid) buffer and aqueous MnCl2 (pH 7.4, 37 °C, 3 h). [ABSTRACT FROM AUTHOR]