Search

Hypothesis: Poly(2-alkyl/aryl-oxazoline)s (PAOx) have seen a resurgence of interest in the new millennium due to their biocompatibility, low toxicity, and higher tunability compared to poly(ethylene glycol)s (PEG)s. Due to the straightforward access to hydrophilic and hydrophobic PAOx, it was hypothesized that amphiphilic PAOx should be capable of stabilizing oil/water (O/W) interfaces. Furthermore, the control of their composition, chain length, and monomer distribution could suggest the formulation of tunable emulsions. Special emphasis was given to evaluate whether spontaneously formed amphiphilic gradient copolymer could stabilize O/W emulsions., Experiments: We prepared a series of amphiphilic block and gradient copolymers based on 2-methyl-2-oxazoline and 2-phenyl-2-oxazoline with variable hydrophilic/lipophilic balance, degree of polymerization, and monomer distribution as basis to explore their ability to stabilize emulsions. Systematic granulometry, stability, and rheology studies were performed to characterize the final emulsions., Findings: Remarkably, stable O/W emulsions are obtained with only 0.5 wt% of copolymers. The finer emulsions stabilized by the most hydrophilic copoly(2-oxazoline)s allow an adjustment of their texture, as well as the concentration increase and oil content. Importantly, emulsion properties prepared with gradient copolymers show similar behavior compared with their block counterparts offering easy access to new biocompatible emulsifiers as these gradient copolymers are spontaneously formed by statistical copolymerization., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier Inc. All rights reserved.)

Poly(2-isopropenyl-2-oxazoline) (PiPOx) is emerging as a promising, versatile polymer platform to design functional materials and particularly biomaterials that rely on the hydrophilic character of the 2-oxazoline side units. To be able to assess the applicability of PiPOx in a biomedical context, it is essential to understand its stability and degradation behavior in physiological conditions. In the present work, the hydrolytic stability of PiPOx was systematically investigated as a function of pH during incubation in various buffers. PiPOx was found to be stable in deionized water (pH 6.9), to have good stability in basic conditions (pH 8 and 9), to be satisfactorily stable in neutral conditions (pH 7.4), and to have moderate to low stability in acidic conditions (decreases drastically from pH 6 to pH 1.2). At pH 4, PiPOx formed a crosslinked network in a timeframe of hours, while at pH 1.2, PiPOx was transformed to a water-soluble poly( N -(2-hydroxyethyl)methacrylamide) type of structure over the course of 2 weeks. In vitro stability assays were performed in phosphate-buffered saline (pH 7.4), simulated body fluid (SBF) (pH 7.4), simulated saliva (pH 6.4), simulated intestinal fluid (pH 6.8), and plasma (pH 7.4) revealing that PiPOx is stable in these SBFs up to 1 week of incubation. When incubated in simulated gastric fluid (pH 1.2), PiPOx exhibited a similar degradation behavior to that observed in the buffer at pH 1.2, rendering a water-soluble structure. The presented results on the stability of PiPOx will be important for future use of PiPOx for the development of drug-delivery systems and biomedical applications, such as hydrogels.

Poly(2-alkyl-2-oxazoline) (PAOx) hydrogels are tailorable synthetic materials with demonstrated biomedical applications, thanks to their excellent biocompatibility and tunable properties. However, their use as injectable hydrogels is challenging as it requires invasive surgical procedures to insert the formed hydrogel into the body due to their nonsoluble 3D network structures. Herein, we introduce cyclooctyne and azide functional side chains to poly(2-oxazoline) copolymers to induce in situ gelation using strain promoted alkyne-azide cycloaddition. The gelation occurs rapidly, within 5 min, under physiological conditions when two polymer solutions are simply mixed. The influence of several parameters, such as temperature and different aqueous solutions, and stoichiometric ratios between the two polymers on the structural properties of the resultant hydrogels have been investigated. The gel formation within tissue samples was verified by subcutaneous injection of the polymer solution into an ex vivo model. The degradation study of the hydrogels in vitro showed that the degradation rate was highly dependent on the type of media, ranging from days to a month. This result opens up the potential uses of PAOx hydrogels in attempts to achieve optimal, injectable drug delivery systems and tissue engineering.

Water-soluble polymers are still the most popular carrier for the preparation of amorphous solid dispersions (ASDs). The advantage of this type of carrier is the fast drug release upon dissolution of the water-soluble polymer and thus the initial high degree of supersaturation of the poorly soluble drug. Nevertheless, the risk for precipitation due to fast drug release is a phenomenon that is frequently observed. In this work, we present an alternative carrier system for ASDs where a water-soluble and water-insoluble carrier are combined to delay the drug release and thus prevent this onset of precipitation. Poly(2-alkyl-2-oxazoline)s were selected as a polymer platform since the solution properties of this polymer class depend on the length of the alkyl sidechain. Poly(2-ethyl-2-oxazoline) (PEtOx) behaves as a water-soluble polymer at body temperature, while poly(2- n -propyl-2-oxazoline) (PPrOx) and poly(2- sec -butyl-2-oxazoline) (PsecBuOx) are insoluble at body temperature. Since little was known about the polymer's miscibility behaviour and especially on how the presence of a poorly-water soluble drug impacted their miscibility, a preformulation study was performed. Formulations were investigated with X-ray powder diffraction, differential scanning calorimetry (DSC) and solid-state nuclear magnetic resonance spectroscopy. PEtOx/PPrOx appeared to form an immiscible blend based on DSC and this was even more pronounced after heating. The six drugs that were tested in this work did not show any preference for one of the two phases. PEtOx/PsecBuOx on the other hand appeared to be miscible forming a homogeneous blend between the two polymers and the drugs.

Herein, we describe a new method for the synthesis of superhydrophilic poly(2-alkyl-2-oxazoline)s (PAOx) from poly(2-ethyl-2-oxazoline) (PEtOx). A well-defined linear polyethylenimine was prepared from PEtOx by controlled acidic hydrolysis of its side-chains followed by reacylation with different carboxylic acids. Using this protocol, we obtained a series of new hydrophilic PAOx containing side-chain ether groups with potential in biomaterials science. The relative hydrophilicity of the polymers was assessed, revealing that poly(2-methoxymethyl-2-oxazoline) (PMeOMeOx) is the most hydrophilic PAOx reported to date. Additionally, the amorphous poly(2-methoxy-ethoxy-ethoxymethyl-2-oxazoline) (PDEGOx) shows the lowest reported glass transition temperature (-25 °C) within the PAOx family to date. The biomedical potential of the prepared polymers was further fortified by an in vitro cytotoxicity study, where all polymers appeared to be noncytotoxic. The described synthetic protocol is universal and can be extremely versatile, especially for PAOx that are difficult to prepare by conventional cationic ring-opening polymerization due to the monomer interference and/or degradation.

The era of poly(ethylene glycol) (PEG) brushes as a universal panacea for preventing non-specific protein adsorption and providing lubrication to surfaces is coming to an end. In the functionalization of medical devices and implants, in addition to preventing non-specific protein adsorption and cell adhesion, polymer-brush formulations are often required to generate highly lubricious films. Poly(2-alkyl-2-oxazoline) (PAOXA) brushes meet these requirements, and depending on their side-group composition, they can form films that match, and in some cases surpass, the bioinert and lubricious properties of PEG analogues. Poly(2-methyl-2-oxazine) (PMOZI) provides an additional enhancement of brush hydration and main-chain flexibility, leading to complete bioinertness and a further reduction in friction. These data redefine the combination of structural parameters necessary to design polymer-brush-based biointerfaces, identifying a novel, superior polymer formulation., (© 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

The synthesis of poly(2-oxazoline)s has been known since the 1960s. In the last two decades, they have risen in popularity thanks to improvements in their synthesis and the realization of their potential in the biomedical field due to their "stealth" properties, stimuli responsiveness, and tailorable properties. Even though the bulk of the research to date has been on linear forms of the polymer, they are also of interest for creating network structures due to the relatively easy introduction of reactive functional groups during synthesis that can be cross-linked under a variety of conditions. This opinion article briefly reviews the history of poly(2-oxazoline)s and examines the in vivo data on soluble poly(2-oxazoline)s to date in an effort to predict how hydrogels may perform as implantable materials. This is followed by an overview of the most recent hydrogel synthesis methods and emerging applications, and is concluded with a section on the future directions predicted for these fascinating yet underutilized polymers., (© 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

In order to prevent hemorrhage during surgical procedures, a wide range of hemostatic agents have been developed. However, their efficacy is variable; hemostatic devices that use bioactive components to accelerate coagulation are dependent on natural sources, which limits reproducibility. Hybrid devices in which chain-end reactive poly(ethylene glycol) is employed as active component sometimes suffer from irregular cross-linking and dissolution of the polar PEG when blood flow is substantial. Herein, we describe a synthetic, nonbioactive hemostatic product by coating N-hydroxysuccinimide ester (NHS)-functional poly(2-oxazoline)s (POx-NHS) onto gelatin patches, which acts by formation of covalent cross-links between polymer, host blood proteins, gelatin and tissue to seal the wound site and prevent hemorrhage during surgery. We studied different process parameters (including polymer, carrier, and coating technique) in direct comparison with clinical products (Hemopatch and Tachosil) to obtain deeper understanding of this class of hemostatic products. In this work, we successfully prove the hemostatic efficacy of POx-NHS as polymer powders and coated patches both in vitro and in vivo against Hemopatch and Tachosil, demonstrating that POx-NHS are excellent candidate polymers for the development of next generation hemostatic patches.

A series of water insoluble poly[(2-ethyl-2-oxazoline)-ran-(2-nonyl-2-oxazoline)] amphiphilic copolymers was synthesized and their solubility properties in the presence of different supramolecular host molecules were investigated. The resulting polymer-cavitand assemblies exhibited a thermoresponsive behavior that could be modulated by variation of the copolymer composition and length. Interestingly, the large number of hydrophobic nonyl units across the polymer chain induced the formation of kinetically-trapped nanoparticles in solution. These nanoparticles further agglomerate into larger aggregates at a temperature that is dependent on the polymer composition and the cavitand type and concentration. The present research expands the understanding on the supramolecular interactions between water insoluble copolymers and supramolecular host molecules.

In recent years, the layer-by-layer (LbL) assembly based on hydrogen bonding interactions is gaining popularity for the preparation of thin film coatings, especially for biomedical purposes, based on the use of neutral, non-toxic building blocks. The use of tannic acid (TA) as hydrogen bonding donor is especially interesting as it results in LbL films that are stable under physiological conditions. In this work, investigations on the LbL thin film preparation of TA with poly(2-oxazoline)s with varying hydrophilicity, namely poly(2-methyl-2-oxazoline) (PMeOx), poly(2-ethyl-2-oxazoline) (PEtOx) and poly(2-n-propyl-2-oxazoline) (PnPropOx), are reported. The LbL assembly process is investigated by quartz crystal microbalance and UV-vis spectroscopy revealing linear growth of the film thickness. Furthermore, isothermal titration calorimetry demonstrates the LbL assembly of TA, and PMeOx is found to be mostly enthalpy driven while the LbL assembly of TA with PEtOx and PnPropOx is mostly entropy driven. Finally, scanning electron microscopy and ellipsometry demonstrate the formation of smooth thin films for LbL assembly of TA with all three polymers. Such poly(2-oxazoline) coatings have high potential for use as anti-biofouling coatings., (© 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Synthetic hydrogels selectively decorated with cell adhesion motifs are rapidly emerging as promising substrates for 3D cell culture. When cells are grown in 3D they experience potentially more physiologically relevant cellâ€"cell interactions and physical cues compared with traditional 2D cell culture on stiff surfaces. A newly developed polymer based on poly(2-oxazoline)s has been used for the first time to control attachment of fibroblast cells and is discussed here for its potential use in 3D cell culture with particular focus on cancer cells toward the ultimate aim of high-throughput screening of anticancer therapies. Advantages and limitations of using poly(2-oxazoline) hydrogels are discussed and compared with more established polymers, especially polyethylene glycol (PEG).

Polymeric multilayer films assembled via hydrogen-bonding are witnessing increased interest from the scientific community. Here we report on hydrogen bonded multilayers of tannic acid and neutral poly(2-oxazoline)s. Importantly we demonstrate, to the best of our knowledge, for the first time that a temperature responsive polymer, in this case poly(2-(n-propyl)-2-oxazline), can be assembled below and above its TCP with distinctly different growth mechanisms.

Currently there is a lack of choice when selecting synthetic materials with the cell-instructive properties demanded by modern biomaterials. The purpose of this study was to investigate the attachment of cells onto hydrogels prepared from poly(2-oxazoline)s selectively functionalized with cell adhesion motifs. A water-soluble macromer based on the microwave-assisted cationic ring-opening polymerization of 2-methyl-2-oxazoline and 2-(dec-9-enyl)-2-oxazoline was functionalized with the peptide CRGDSG or controls using thiol-ene photochemistry followed by facile cross-linking in the presence of a dithiol cross-linker. The growth of human fibroblasts on the hydrogel surfaces was dictated by the structure and amount of incorporated peptide. Controls without any peptide showed resistance to cellular attachment. The benignity of the cross-linking conditions was demonstrated by the incorporation of fibroblasts within the hydrogels to produce three-dimensional cell-polymer constructs.

Detailed characterization of synthetic polymers often required multiple advanced separation technologies since the various molecular distributions present, e.g. polymer molar mass, chemical composition, functionality distributions, etc. are generally mutually dependent. The complexity of polymeric materials necessitates the use of a variety of analytical methods, either in conjunction or in integrated ("hyphenated") systems. Poly(2-oxazoline) homo- and copolymers with two different side groups rendering the systems hydrophobic, i.e. phenyl and dec-9-enyl substituents, synthesized by living cationic ring-opening polymerization, were investigated. The average chemical composition obtained by pyrolysis-gas chromatography-mass spectrometry (Py-GC-MS) corresponded well with the theoretical composition. The chemical-composition distribution was studied with gradient elution liquid chromatography (GELC) using water and tetrahydrofuran as mobile-phase components. Statistical copolymer samples - in contrast to their block copolymer analogues - revealed two well-separated peaks in GELC. By combining GELC with size-exclusion chromatography (SEC) it was confirmed that the GELC separation was not based on differences in the molar mass. A more likely explanation of the GELC results is the presence of an ionic fraction in the samples of statistical copolymers resulting from either chain-transfer reactions or termination by addition of water. This hypothesis was confirmed with capillary electrophoresis., (Copyright © 2012 Elsevier B.V. All rights reserved.)

Poly(2-alkyl-2-oxazoline)s are biocompatible polymers with polypeptide-isomeric structures that are attracting increasing interest as biomaterials for drug, gene, protein, and radionuclide delivery. They are, however, still relatively new in comparison to other classes of hydrophilic water-soluble polymers already established for such use, including poly(ethylene oxide), polyvinylpyrrolidone, and polymethacrylamides such as poly[N-(2-hydroxypropyl)methacrylamide]. This feature article critically compares the synthetic aspects and physicochemical and biological properties of poly(2-alkyl-2-oxazoline)s and these commonly studied polymers in terms of their suitability for biomedical applications., (Copyright © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Copoly(2-oxazoline)s, prepared by the cationic ring-opening polymerization of 2-(dec-9-enyl)-2-oxazoline with either 2-methyl-2-oxazoline or 2-ethyl-2-oxazoline, are crosslinked with small dithiol molecules under UV irradiation to form homogeneous networks. In situ monitoring of the crosslinking reaction by photo-rheology reveals the formation of soft gels within minutes. The degree of swelling in water is tunable based on the hydrophilicity of the starting macromers and the proportion of alkene side arms present. Furthermore, degradable hydrogels are prepared based on incorporation of a hydrolytically cleavable dithiol crosslinker. The rapid synthesis of the macromers and mild crosslinking conditions make these materials ideal for future biomaterial applications., (Copyright © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

The ability of merging the properties of poly(2-oxazoline)s and poly(ethylene imine) is of high interest for various biomedical applications, including gene delivery, biosensors, and switchable surfaces and nanoparticles. In the present research, a methodology for the controlled and selective hydrolysis of (co)poly(2-oxazoline)s is developed in an ethanol-water solvent mixture, opening the path toward a wide range of block poly(2-oxazoline-co-ethylene imine) (POx-PEI) copolymers with tunable properties. The unexpected influence of the selected ethanol-water binary solvent mixture on the hydrolysis kinetics and selectivity is highlighted in the pursue of well-defined POx-PEI block copolymers., (Copyright © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Crystallization of poly(2-isobutyl-2-oxazoline) and poly(2-nonyl-2-oxazoline) is found to occur by room temperature annealing below the upper critical solution temperature in ethanol-water solvent mixtures. Both polymers produce similar self-assembled structures (see image), resembling the previously reported crystalline hierarchical structures obtained from hot aqueous poly(2-isopropyl-2-oxazoline) solutions above the lower critical solution temperature. These observations suggest that the crystallization induced self-assembly process is a rather general phenomenon occurring for semicrystalline polymers in liquid-liquid two phase systems., (Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

The bulk polymerization of 2-(dec-9-enyl)-2-oxazoline (DecEnOx), a fatty acid-based monomer for the cationic ring-opening polymerization, is reported. Furthermore, under optimal conditions, namely microwave heating at 100 °C, the bulk copolymerization with 2-ethyl-2-oxazoline yielded well-defined copolymers. Due to its pendant alkene groups DecEnOx-based polymers possess the potential to be modified in efficient thiol-ene reactions. The functionalization with thiols, e.g., dodecanethiol and 2,3,4,6-tetra-O-acetyl-1-thio-β-D-glycopyranose in "green" solvents is demonstrated., (Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

A new sugar-substituted 2-oxazoline monomer was prepared using the copper-catalyzed alkyne-azide cycloaddition (CuAAC) reaction. Its copolymerization with 2-ethyl-2-oxazoline as well as 2-(dec-9-enyl)-2-oxazoline, yielding well-defined copolymers with the possibility to tune the properties by thiol-ene "click" reactions, is described. Extensive solubility studies on the corresponding glycocopolymers demonstrated that the lower critical solution temperature behavior and pH-responsiveness of these copolymers can be adjusted in water and phosphate-buffered saline (PBS) depending on the choice of the thiol. By conjugation of 2,3,4,6-tetra-O-acetyl-1-thio-β-d-glucopyranose and subsequent deprotection of the sugar moieties, the hydrophilicity of the copolymer could be increased significantly, allowing a cloud-point tuning in the physiological range. Furthermore, the binding capability of the glycosylated copoly(2-oxazoline) to concanavalin A was investigated.

2-Oxazolines are well-known organic compounds which are included in a variety of complex biologically active structures and play a role as catalyst ligands and intermediates for functional compounds. In addition, 2-oxazolines serve as monomers for the synthesis of substituted poly(imine)s by cationic ring-opening polymerization. For the latter application, the feasibility of preparing new 2-substituted-2-oxazolines was investigated using an automated synthesizer. The reaction of various nitriles with 2-aminoethanol under Lewis acid catalysis was utilized for this purpose. Twenty-nine different substituted nitriles were selected out of more than 2000 commercial available nitriles to form the corresponding 2-oxazolines. At first, the reaction conditions were optimized for seven nitriles with regard to solvent and catalyst, including reproducibility tests in an automated parallel robot system. In the next step, the synthesis of all 29 2-oxazolines was screened in an automated parallel manner, whereby the reactions were monitored by GC-MS measurements providing novel insights in the scope of this synthesis route. These insights resulting from the high-throughput screening were validated by performing representative larger-scale syntheses of selected 2-oxazolines.

The living cationic ring-opening polymerization of 2-oxazolines has been studied in great detail since its discovery in 1966. The versatility of this living polymerization method allows copolymerization of a variety of 2-oxazoline monomers to give a range of tunable polymer properties that enable, for example, hydrophilic, hydrophobic, fluorophilic, as well as hard and soft materials to be obtained. However, this class of polymers was almost forgotten in the 1980s and 1990s because of their long reaction times and limited application possibilities. In the new millennium, a revival of poly(2-oxazoline)s has arisen because of their potential use as biomaterials and thermoresponsive materials, as well as the easy access to defined amphiphilic structures for (hierarchical) self-assembly. Recent developments that illustrate the potential of poly(2-oxazoline)s are discussed in this Review. In addition, the promising combination of poly(2-oxazoline)s and click chemistry is illustrated.

The cloud point of copolymers of 2-ethyl-2-oxazoline and 2-n-propyl-2-oxazoline could be tuned from 25 degrees C to 100 degrees C by varying molecular weight and composition; the reversibility and concentration dependence of the cloud points were evaluated to assess the potential of these copoly(2-oxazoline)s as alternatives to poly(N-isopropylacrylamide).

The living cationic ring-opening polymerization of 2-oxazolines with fluorinated aromatic substituents was found to be strongly accelerated by o-fluoro substituents.

Poly(2-ethyl-2-oxazoline) (POZ) was synthesized by living cationic ring-opening polymerization under microwave irradiation yielding polymers with low polydispersity indices (PDI, 1.15). The polymerization was quenched with sodium carbonate yielding a hydroxyl end-group with a high degree of functionality. The hydroxyl group was converted to carboxylate and the polymer was purified by ionic exchange chromatography. Following activation to succinimidyl ester, POZ-conjugates to high and low molecular weight biomolecules, trypsin and Ara-C, were obtained. The properties of the conjugates were compared to those of the corresponding conjugates with poly(ethylene glycol) (PEG) of similar size. The coupling of POZ to trypsin did not affect the enzymatic activity towards low mass substrates but, on the contrary, reduced the activity on the higher mass ones. Furthermore, the POZ-protein conjugates showed hydrodynamic volumes and protein rejecting properties similar to those of PEG-conjugates. Similarly, the POZ-Ara-C conjugate revealed a drug release profile, stability towards the degrading enzyme cytidine deaminase and in vitro cytotoxicity comparable to what has already been described for the PEG derivative. These data support the potential of POZ as a versatile alternative to the well-known and widely used PEG for protein and drug conjugation and delivery.