Search

In a previous study, we successfully coated hydroxyapatite (HAp) onto titanium (Ti) plates using the erbium-doped yttrium aluminum garnet pulsed-laser deposition (Er:YAG-PLD) method. In this study, we performed further experiments to validate the in vitro osteogenic properties, macrophage polarization, and in vivo osseointegration activity of HAp-coated Ti (HAp-Ti) plates and screws. Briefly, we coated a HAp film onto the surfaces of Ti plates and screws via Er:YAG-PLD. The surface morphological, elemental, and crystallographic analyses confirmed the successful surface coating. The macrophage polarization and osteogenic induction were evaluated in macrophages and rat bone marrow mesenchymal stem cells, and the in vivo osteogenic properties were studied. The results showed that needle-shaped nano-HAp promoted the early expression of osteogenic and immunogenic genes in the macrophages and induced excellent M2 polarization properties. The calcium deposition and osteocalcin production were significantly higher in the HAp-Ti than in the uncoated Ti. The implantation into rat femurs revealed that the HAp-coated materials had superior osteoinductive and osseointegration activities compared with the Ti, as assessed by microcomputed tomography and histology. Thus, HAp film on sandblasted Ti plates and screws via Er:YAG-PLD enhances hard-tissue differentiation, macrophage polarization, and new bone formation in tissues surrounding implants both in vitro and in vivo.

This study aimed to develop a novel culture method for rat adipose-derived stem cells (rADSC) and evaluate their osteogenic potential. The rADSC cultured in xeno-free culture medium (XF-rADSCs) or conventional culture medium containing fetal bovine serum (FBS-rADSCs) were combined with micropieces of xeno-free recombinant collagen peptide to form 3-dimensional aggregates (XF-rADSC-CellSaic or FBS-rADSC-CellSaic). Both FBS-rADSC and XF-ADSC in CellSaic exhibited multilineage differentiation potential. Compared to FBS-rADSC-CellSaic, XF-rADSC-CellSaic accelerated and promoted osteogenic differentiation in vitro. When transplanted into rat mandibular congenital bone defects, the osteogenically differentiated XF-rADSC-CellSaic induced regeneration of bone tissue with a highly maturated structure compared to FBS-rADSC-CellSaic. In conclusion, XF-rADSC-CellSaic is a feasible 3-dimensional platform for efficient bone formation.

Polyetheretherketone (PEEK) is one of the most promising implant materials for hard tissues due to its similar elastic modulus; however, usage of PEEK is still limited owing to its biological inertness and low osteoconductivity. The objective of the study was to provide PEEK with the ability to sustain the release of growth factors and the osteogenic differentiation of stem cells. The PEEK surface was sandblasted and modified with polydopamine (PDA). Moreover, successful sandblasting and PDA modification of the PEEK surface was confirmed through physicochemical characterization. The gelatin hydrogel was then chemically bound to the PEEK by adding a solution of glutaraldehyde and gelatin to the surface of the PDA-modified PEEK. The binding and degradation of the gelatin hydrogel with PEEK (GPEEK) were confirmed, and the GPEEK mineralization was observed in simulated body fluid. Sustained release of bone morphogenetic protein (BMP)-2 was observed in GPEEK. When cultured on GPEEK with BMP-2, human mesenchymal stem cells (hMSCs) exhibited osteogenic differentiation. We conclude that PEEK with a gelatin hydrogel incorporating BMP-2 is a promising substrate for bone tissue engineering.

Composite scaffolds obtained by the combination of biodegradable porous scaffolds and hydroxyapatite with bone regeneration potential are feasible materials for bone tissue engineering. However, most composite scaffolds have been fabricated by complicated procedures or under thermally harsh conditions. We have previously demonstrated that hydroxyapatite coating onto various substrates under a thermally mild condition was achieved by erbium-doped yttrium aluminum garnet (Er: YAG) pulsed laser deposition (PLD). The purpose of this study was to prepare a polycaprolactone (PCL) porous scaffold coated with the hydroxyapatite by the Er: YAG-PLD method. Hydroxyapatite coating by the Er: YAG-PLD method was confirmed by morphology, crystallographic analysis, and surface chemical characterization studies. When cultured on PCL porous scaffold coated with hydroxyapatite, rat bone marrow-derived mesenchymal stem cells adhered, spread, and proliferated well. The micro-CT and staining analyses after the implantation of scaffold into the critical-sized calvaria bone defect in rats indicate that PCL porous scaffold coated with hydroxyapatite demonstrates accelerated and widespread bone formation. In conclusion, PCL porous scaffold coated with hydroxyapatite obtained by the Er: YAG-PLD method is a promising material in bone tissue engineering.

Polyetheretherketone (PEEK) is a potential substitute for conventional metallic biomedical implants owing to its superior mechanical and chemical properties, as well as biocompatibility. However, its inherent bio-inertness and poor osseointegration limit its use in clinical applications. Herein, thin titanium films were deposited on the PEEK substrate by plasma sputtering, and porous nanonetwork structures were incorporated on the PEEK surface by alkali treatment (PEEK-TNS). Changes in the physical and chemical characteristics of the PEEK surface were analyzed to establish the interactions with cell behaviors. The osteoimmunomodulatory properties were evaluated using macrophage cells and osteoblast lineage cells. The functionalized nanostructured surface of PEEK-TNS effectively promoted initial cell adhesion and proliferation, suppressed inflammatory responses, and induced macrophages to anti-inflammatory M2 polarization. Compared with PEEK, PEEK-TNS provided a more beneficial osteoimmune environment, including increased levels of osteogenic, angiogenic, and fibrogenic gene expression, and balanced osteoclast activities. Furthermore, the crosstalk between macrophages and osteoblast cells showed that PEEK-TNS could provide favorable osteoimmunodulatory environment for bone regeneration. PEEK-TNS exhibited high osteogenic activity, as indicated by alkaline phosphatase activity, osteogenic factor production, and the osteogenesis/osteoclastogenesis-related gene expression of osteoblasts. The study establishes that the fabrication of titanate nanonetwork structures on PEEK surfaces could extract an adequate immune response and favorable osteogenesis for functional bone regeneration. Furthermore, it indicates the potential of PEEK-TNS in implant applications.

Various stresses latently induce cellular senescence that occasionally deteriorates the functioning of surrounding tissues. Nevertheless, little is known about the appearance and function of senescent cells, caused by the implantation of beta-tricalcium phosphate (β-TCP)-used widely in dentistry and orthopedics for treating bone diseases. In this study, two varying sizes of β-TCP granules (<300 μm and 300-500 μm) were implanted, and using histological and immunofluorescent staining, appearances of senescent-like cells in critical-sized bone defects in the calvaria of Sprague Dawley rats were evaluated. Parallelly, bone formation in defects was investigated with or without the oral administration of senolytics (a cocktail of dasatinib and quercetin). A week after the implantation, the number of senescence-associated beta-galactosidase, p21-, p19-, and tartrate-resistant acid phosphatase-positive cells increased and then decreased upon administrating senolytics. This administration of senolytics also attenuated 4-hydroxy-2-nonenal staining, representing reactive oxygen species. Combining senolytic administration with β-TCP implantation significantly enhanced the bone formation in defects as revealed by micro-computed tomography analysis and hematoxylin-eosin staining. This study demonstrates that β-TCP granules latently induce senescent-like cells, and senolytic administration may improve the bone-forming ability of β-TCP by inhibiting senescence-associated mechanisms.

To enhance biocompatibility, osteogenesis, and osseointegration, we coated titanium implants, by krypton fluoride (KrF) pulsed laser deposition, with a thin film of fluoridated hydroxyapatite (FHA). Coating was confirmed by scanning electron microscopy (SEM) and scanning probe microscopy (SPM), while physicochemical properties were evaluated by attenuated reflectance Fourier transform infrared spectroscopy (ATR-FTIR). Calcium deposition, osteocalcin production, and expression of osteoblast genes were significantly higher in rat bone marrow mesenchymal stem cells seeded on FHA-coated titanium than in cells seeded on uncoated titanium. Implantation into rat femurs also showed that the FHA-coated material had superior osteoinductive and osseointegration activity in comparison with that of traditional implants, as assessed by microcomputed tomography and histology. Thus, titanium coated with FHA holds promise as a dental implant material., Competing Interests: The authors declare no conflict of interest.

Purpose: Interferon (IFN)-γ is a major cytokine produced by immune cells that plays diverse roles in modulating both the immune system and bone metabolism, but its role in autogenous bone grafting remains unknown. Here, we present that local IFN-γ administration improved the efficacy of autogenous bone graft treatment in an experimental rat model., Methods: An autogenous bone graft model was prepared with critically sized rat calvariae defects. Four weeks (w) after bone graft implantation, rats were treated locally with IFN-γ or were not treated. The effect of IFN-γ on bone formation was evaluated for up to 8w with micro-computed tomography, quantitative histomorphometry, and Von Kossa staining. Osteoclastogenesis was assessed by tartrate-resistant acid phosphatase staining. Immunohistochemistry staining or quantitative polymerase chain reactions were used to estimate the expression of osteoclast differentiation factor and inflammatory cytokines including tumor necrosis factor (TNF)-α, a well-known stimulant of osteoclastogenesis and an inhibitor of osteoblast activity, in defects., Results: Newly formed bone gradually replaced the autogenous bone grafts within 4w, although severe bone resorption with osteoclastogenesis and TNF-α expression occurred after 6w in the absence of IFN-γ administration. IFN-γ administration markedly attenuated bone loss, osteoclastogenesis, and TNF-α expression, while it enhanced bone formation at 8w., Conclusion: Local IFN-γ administration promoted bone formation in autogenous bone grafts possibly via regulating osteoclastogenesis and TNF-α expression. The data provide insights into the potential roles of IFN-γ in autogenous bone grafting., (Copyright © 2016 Japan Prosthodontic Society. Published by Elsevier Ltd. All rights reserved.)

Despite advances in stem cell biology, there are few effective techniques to promote the osteogenic differentiation of human primary dedifferentiated fat (DFAT) cells. We attempted to investigate whether epigallocatechin-3-gallate (EGCG), the main component of green tea catechin, facilitates early osteogenic differentiation and mineralization on DFAT cells in vitro. DFAT cells were treated with EGCG (1.25-10 μM) in osteogenic medium (OM) with or without 100 nM dexamethasone (Dex) for 12 days (hereafter two osteogenic media were designated as OM(Dex) and OM). Supplementation of 1.25 μM EGCG to both the media effectively increased the mRNA expression of collagen 1 (COL1A1) and runt-related transcription factor 2 (RUNX2) and also increased proliferation and mineralization. Compared to OM(Dex) with EGCG, OM with EGCG induced earlier expression for COL1A1 and RUNX2 at day 1 and higher mineralization level at day 12. OM(Dex) with 10 μM EGCG remarkably hampered the proliferation of the DFAT cells. These results suggest that OM(without Dex) with EGCG might be a preferable medium to promote proliferation and to induce osteoblast differentiation of DFAT cells. Our findings provide an insight for the combinatory use of EGCG and DFAT cells for bone regeneration and stem cell-based therapy.

Catechins are extensively used in health care treatments. Nevertheless, there is scarce information about the feasibility of local administration with polyphenols for bone regeneration therapy, possibly due to lack of effective delivery systems. Here we demonstrated that the epigallocatechin-3-gallate-conjugated gelatin (EGCG/Gel) prepared by an aqueous chemical synthesis using 4-(4,6-dimethoxy-1,3,5-triazin-2-yl)-4-morpholinium chloride (DMT-MM) gradually disintegrated with time and facilitated bone formation in a critical size defect of a mouse calvaria. Conjugation of EGCG with the Gel generated cross-linking between the two molecules, thereby leading to a retardation of the degradation of the EGCG/Gel and to a delayed release of EGCG. The prepared EGCG/Gels represented significant osteogenic capability compared with that of the uncross-linked Gel and the cross-linked Gel with uncombined-EGCG. In vitro experiments disclosed that the EGCG/Gel induced osteoblastogenesis of a mouse mesenchymal stem cell line (D1 cells) within 14 days. Using fluorescently-labeled EGCG/Gel, we found that the fraction of EGCG/Gel adsorbed onto the cell membrane of the D1 cells possibly via a Gel-cell interaction. The interaction might confer the long-term effects of EGCG on the cells, resulting in a potent osteogenic capability of the EGCG/Gel in vivo. These results should provide insight into local controlled release of polyphenols for bone therapy.

We evaluated the effects on bone formation of combining synthesized collagen model polypeptides consisting of a Pro-Hyp-Gly [poly(PHG)] sequence and alpha-tricalcium phosphate (α-TCP) particles with various median sizes (large: 580.8 μm; small: 136.2 μm; or large and small mixed: 499.3 μm) in a skull defect model in mini-pigs. Quantitative image analyses for the volume density (VD) of new bone revealed that the VD in each α-TCP group was significantly higher than that in the poly(PHG) control group, with the mixed group showing the highest VD among all the groups at 4 weeks after implantation. Histological assessments revealed that the small α-TCP particles were almost completely degraded at 8 weeks. At 12 weeks, all sizes of α-TCP particles were completely degraded and remodeling of the lamellar bone was observed. The present findings suggest that particle size may influence the success of bone formation in defects.

To date, there has been no study on the development of novel regimens based on the following tissue engineering principles: seeding and culturing mesenchymal stem cells (MSCs) on a scaffold before surgery or injecting cultured MSCs into a scaffold during surgery. The purpose of this study was to assess the in vivo osteogenic ability of scaffold/MSCs implanted beneath the periosteum of the cranial bone of rats in three different sample groups: one in which MSCs were pre-seeded and cultured on a scaffold to produce the 3-D woven fabric scaffold/MSC composite using osteo-lineage induction medium, one in which cultured MSCs produced by osteo-lineage induction in cell cultivation flasks were injected into a scaffold during surgery and a control group, in which only the 3-D woven fabric scaffold was implanted. The results indicate that pre-seeding MSCs on a scaffold leads to a higher osteogenic ability than injecting cultured MSCs into a scaffold during surgery.

The objective of this study was to evaluate the effect of beta-tricalcium phosphate (beta-TCP) bead size on the behavior of KUSA/A1 mouse osteoblasts when the beta-TCP beads are used as the solid phase of a scaffold in which alginate was used as the gel phase. KUSA/A1 cells were loaded onto a three-dimensional (3D) scaffold fabricated from beta-TCP beads with diameters ranging from 300 to 500 microm (small beads), 500-700 microm (medium beads) and 700-850 microm (large beads); cells were cultured for 3, 7 and 14 days. Scanning electron microscope observations showed that each bead was connected in a network consisting of the alginate gel and KUSA/A1 cellular matrix that was tightly bonded to form a 3D structure. After 3 days, cells in the 3D scaffold with medium beads had a significantly higher alkaline phosphatase activity (ALP) than cells in the other scaffolds. However, by 7 and 14 days in culture there was no significant difference in DNA levels, ALP activity or osteocalcin expression. At 8 weeks, only the composite containing small beads and KUSA/A1 cells had turned completely into bone in vivo. Thus, bead size may influence the success of bone formation in this context.