Search

The extracellular acidic milieu in bones results in activation of osteoclasts (OC) and inhibition of osteoblasts (OB) causing a net loss of calcium from the skeleton and the deterioration of bone microarchitecture. Alkalinization through supplementation with potassium citrate (K citrate) has been proposed to limit the osteopenia progression, even though its pharmacological activity in bone microenvironment is not well defined. We evaluated if K citrate was able to prevent the adverse effects that acidic milieu induces on bone cells. OC and OB were maintained in neutral (pH 7.4) versus acidic (pH 6.9) culture medium, and treated with different K citrate concentrations. We evaluated the OC differentiation at seven days, by counting of multinucleated cells expressing tartrate-resistant acid phosphatase, and the activity of mature OC at 14 days, by quantifying of collagen degradation. To evaluate the effects on OB, we analyzed proliferation, mineralization, and expression of bone-related genes. We found that the low pH increased OC differentiation and activity and decreased OB function. The osteoclastogenesis was also promoted by RANKL concentrations ineffective at pH 7.4. Non-cytotoxic K citrate concentrations were not sufficient to steadily neutralize the acidic medium, but a) inhibited the osteoclastogenesis, the collagen degradation, and the expression of genes involved in RANKL-mediated OC differentiation, b) enhanced OB proliferation and alkaline phosphatase expression, whereas it did not affect the in vitro mineralization, and c) were effective also in OC cultures resistant to alendronate, i.e. the positive control of osteoclastogenesis inhibition. In conclusion, K citrate prevents the increase in OC activity induced by the acidic microenvironment, and the effect does not depend exclusively on its alkalizing capacity. These data provide the biological basis for the use of K citrate in preventing the osteopenia progression resulting from low-grade acidosis.

The aim of our study was to investigate whether the defective function of osteogenic cells induced by neuroblastoma might play a role in the development of skeletal metastases. This mechanism has been extensively demonstrated for multiple myeloma, in which the blockage of osteoblast differentiation has been ascribed to the inhibitors of canonical Wingless pathway (Wnt), namely Dickkopf 1 (Dkk1). Our purpose was to verify if neuroblastoma cells derived from bone marrow metastases (SH-SY5Y, LAN1) or primaries (NB100, CHP212) hamper the differentiation of mesenchymal stem cells (hMSCs) into osteoblasts in a paracrine manner, and to test whether this ability depends on Dkk1 activity. We found that all neuroblastoma cells increased the proliferation of hMSCs collected from pediatric-aged donors, with a corresponding decrease in osteoblast differentiation markers, including alkaline phosphatase (ALP), analyzed as gene expression, enzymatic activity and number of ALP-positive colony forming units, osteoprotegerin (OPG) release, OPG and osteocalcin gene-expression. Dkk1 mRNA and protein were detectable in all cell lines, and the use of neutralizing anti-Dkk1 antibody reversed the effects induced by SH-SY5Y cells. Taken together, our results confirm that neuroblastoma hinders osteoblastogenesis, and that Dkk1 release seems to play a crucial role in blocking the differentiation of osteoprogenitor cells, though the ability to promote osteoclast activation remains an essential requirement for the development of skeletal metastases. Finally, our findings suggest that strategies regulating Wnt signaling and Dkk1 activity could be considered for adjuvant therapies in neuroblastoma metastasizing to the skeleton.

This study was aimed to investigate whether the activation of poly-(epsilon-caprolactone) (PCL) surface by low-energy irradiation and/or the biofunctionalization by absorption of arginine-glycine-aspartic sequences (RGD), can modify the expression of integrins closely related to the osteoblast activity. For this purpose, we analysed the physicochemical changes induced by irradiation and RGD immobilization, the consequences on cell adhesion and spreading, and the effects on integrin expression. PCL irradiated with 5 x 10(15)He(+)/cm(2) (10 keV energy) (irr-PCL) showed an altered surface layer with a partial loss of carboxyl species and the formation of carbonyl groups. Moreover, irr-PCL showed a small smoothening effect and a less polar character in comparison to the pristine ones. The RGD immobilization was observed only on irr-PCL (surface coverage: 7.0 pmol/cm(2)). Human osteoblasts (hOB) were cultured on untreated PCL (ut-PCL), ut-PCL+RGD, irr-PCL, and irr-PCL+RGD. After 24h, ut-PCL hindered the cell adhesion, while a discrete layer of hOB with a good cytoskeleton organization was detected on irr-PCL and irr-PCL+RGD. Before seeding, the single hOB suspension expressed alpha1, alpha2, alpha3, alpha5, beta1, and alphaVbeta3; after 24h, cells cultured on tissue-plastic expressed high levels of beta1 and alphaVbeta3, while alpha1 showed a low intensity and alpha2, alpha3, and alpha5 were negative. beta1 and alphaVbeta3 were selected to evaluate the interaction between cells and PCL samples. The beta1 expression was higher in hOB cultured on irr-PCL than on the other samples. A significant increase in alphaVbeta3 expression was observed only in irr-PCL+RGD, and confirmed by the gene expression analysis. In conclusion, ion irradiation and RGD adsorption on PCL surfaces modulate the expression of integrin involved in hOB growth and function, indicating the effectiveness of biomimetic surfaces in promoting cell adhesion. Ultimately, the study of integrin expression may suggest proper changes to the surface structure in order to improve the osteoconductivity of selected materials.

In this study, we investigate the molecular mechanisms by which human osteoblasts (HOB) challenged with wear debris promote the differentiation of osteoclast precursors. HOB were obtained from trabecular bone and exposed to alumina (Al(2)O(3)) or 'ultra-high molecular weight polyethylene' (UHMWPE) particles for 24h. The supernatant (HOB-CM) was used for the immunoenzymatic detection of receptor activator of NF-kappaB ligand (RANKL) and osteoprotegerin (OPG), as well as for inducing the osteoclast differentiation from peripheral blood mononuclear cells (PBMC). The OPG-to-RANKL ratio was significantly decreased in the conditioned medium of UHMWPE-challenged HOB. Morphological and cytochemical analysis showed that HOB-CM induced by itself the osteoclast formation, but a large amount of multinucleated tartrate-resistant acid phosphatase (TRAP)-positive giant cells were obtained when PBMCs were cultured with 1 microg/mL UHMWPE HOB-CM. The expression of genes involved in osteoclast differentiation and activation was evaluated, i.e. c-fms, RANK, c-src, c-fos, cathepsin-K (CATK), TRAP, and calcitonin R (CTR). The UHMWPE HOB-CM increases c-src expression, suggesting that polyethylene debris favour the paracrine activity of HOB in inducing the pathway involved in osteoclast polarization and adhesion. On the contrary, Al(2)O(3) HOB-CM downregulates c-fos expression, suggesting that the passage from macrophages into the osteoclast lineage is deviated. These results show that Al(2)O(3) wear debris is less active than UHMWPE in inducing osteoclast differentiation. Moreover, they provide new insight into the molecular basis of particle-induced osteoclastogenesis, that is the starting point for planning mode-specific targeting of periprosthetic osteolysis.

Particle-induced macrophage activation, mainly by UHMWPE wear, has been recognized as the biological mechanism leading to periprosthetic bone resorption, which is responsible for the loosening of the total hip replacements (THR). Ceramic-on-ceramic implants have been advocated as a means of reducing wear products. Many studies investigated the effect of alumina (Al(2)O(3)) particles on monocytes/macrophages, but only limited information are available on their participation to bone turnover. An in vitro model was performed to investigate how Al(2)O(3) and UHMWPE particles may influence the osteoblast-osteoclast interaction: human osteoblasts (HOB) were obtained from trabecular bone, while osteoclasts were derived from peripheral blood mononuclear cells (PBMC) of healthy donors. The amount of IL6, TNF alpha, GM-CSF, and other factors acting on the bone turnover, i.e. the 'receptor activator of NF kappa B' ligand (RANKL) and osteoprotegerin (OPG), was detected in culture medium of particle-challenged HOB (HOB-CM). The Al(2)O(3) and UHMWPE particles did not affect either cell viability or TNF and GM-CSF release, while the increase in IL6 release seemed to be dependent on the particle concentration. UHMWPE increased the release of RANKL from HOB, while OPG and OPG-to-RANKL ratio were significantly inhibited. The ability of HOB-CM to promote osteoclastogenesis was tested via osteoblast/monocyte cooperation: after seven days of culture UHMWPE HOB-CM induced a large amount of multinucleated TRAP-positive giant cells, as well as significantly reduced the amount of IL6, GM-CSF and RANKL in the supernatant. With regard to the inductive effect on the osteoclastogenesis, our results show that the Al(2)O(3) wear debris are less active.

Some endodontic sealers have been shown to cause local and systemic effects, mainly due to microleakage of chemicals from the sealer. To avoid the risk of toxic effects in vivo, the biological compatibility of filling materials has to be assessed. In vitro compatibility of Proroot MTA cement in comparison with two different fillers used in clinical practice, was examined by testing the adherence, viability, proliferation and secretion of collagen of osteoblast-like cells. In our experimental system, Saos-2 cells challenged with Proroot MTA for 24 and 72 h showed a better behaviour than the cells exposed to the other compounds under assay. We found that the cells attached to the rough surface of Proroot MTA cement and spread onto the rough surface. Moreover, the cells on Proroot MTA were viable, grew, and released some collagen even at 72 h, while cell metabolism and growth was dramatically reduced onto sEBA and amalgam surfaces. A parallel behaviour was found after the cells were challenged with extracts of the different fillers. In conclusion, according to our in vitro study, Proroot MTA showed a good interaction with bone-forming cells: such behaviour may partially account for its satisfying clinical performance.

Current methods for the replacement of skeletal tissue involve the use of autografts, allografts and, recently, synthetic substitutes, which provide a proper amount of material to repair large bone defects. Engineered bone seems a promising approach, but a number of variables have to be set prior to any clinical application. In this study, four different poly caprolactone-based polymers (PCL) were prepared and tested in vitro using osteoblast-like Saos-2 cells. Differences among three-dimensional polymers include porosity, addition of hydroxyapatite (HA) particles, and treatment with simulated body fluid. Biochemical parameters to assess cell/material interactions include viability, growth, alkaline phosphatase release, and mineralization of osteoblastic cells seeded onto three-dimensional samples, while their morphology was observed using light microscopy and SEM. Preliminary results show that the polymers, though degrading in the medium, have a positive interaction with cells, as they support cell growth and functions. In the short-term culture (3-7 days) of Saos-2 on polymers, little differences were found among PCL samples, with the presence of HA moderately improving the number of cells onto the surfaces. In the long term (3-4 weeks), it was found that the HA-added polymers obtained the best colonization by cells, and more mineral formation was observed after coating with SBF. It can be concluded that PCL is a promising material for three-dimensional scaffold for bone formation, and the presence of bone-like components improves osteoblast activity.

The osteoprotegerin-ligand (OPG-L) has been identified as the essential factor required for osteoclastogenesis, and its effects are prevented by the osteoprotegerin (OPG). The OPG-L/OPG balance plays a crucial role in coordinating the sequence of osteoclast and osteoblast differentiation during the bone remodeling. The aim of the study was to investigate if polymethylmethacrylate-based cements are able to modulate the expression of OPG-L/OPG in MG63 cells, which are known to have high levels of OPG and inducible expression of OPG-L. Four radio-opaque cements. namely Sulfix-60, CMW1, CMW2 and CMW3, were polymerized for either 1 h or 7 d. MG63 were incubated for 24 h with culture medium only, cement extracts and 2 microg/ml of human recombinant IL-1beta as positive control. An RT-PCR was performed to detect the OPG and OPG-L expression, and the house-keeping gene, GAPDH, was used as a reference for the semi-quantitative analysis. An increase in the OPG-L band density was observed for all cements, and consequently, the OPG-L/OPG ratio also increased. The ability of bone cements to induce the expression of OPG-L could be a co-factor in the development of osteolysis at the bone-cement interface.

The purpose of this study was to investigate in vitro the apoptosis- and/or necrosis-inducing potential of polymethylmethacrylate (PMMA)-based bone cements for prosthetic surgery. Four bone cements widely used in orthopedics were tested as extracts onto osteoblast-like MG-63 cells and for comparison, HL-60 cells, which are remarkably sensitive to apoptotic stimuli. Neutral red uptake (NRU) was used to measure cell viability while Hoechst 33258 staining was used to detect DNA content. Apoptosis was characterized using a BrdU-based ELISA assay for DNA fragmentation and examined by fluorescence microscopy using acridine orange and propidium iodide staining of nuclei. The generation of reactive oxygen species (ROS), which could mediate apoptosis, was verified using dichlorofluorescein-diacetate (DCFH-DA) oxidation to DCF. After 24 h of challenge of the cells with the four cement extracts, the viability of either MG-63 or HL-60 cells was found to be unaltered, as recorded by NRU. Apoptotic cell death was induced by three cements in HL-60, whereas MG-63 cells were significantly affected by the four cements tested: the finding of DNA fragments both in the cytoplasm and supernatants of MG-63 after 24 h demonstrated that these cells underwent late-apoptosis secondary necrosis. Fluorescent staining of the nuclei confirmed the results obtained with the ELISA test. Oxygen free radicals were elicited by two cements in HL-60 cells, while MG-63 did not generate ROS in response to cements. This study helps to gain more insight into the mechanism of cell death induced by PMMA-based cements and suggests apoptosis of osteoblasts as a part of the tissue reaction around cemented prostheses.

This study examined the effects of in vitro challenge with four polymerized acrylic bone cements (Sulfix-60, CMW 1, CMW 2, and CMW 3) on the expression of interleukin-1beta (IL-1beta), interleukin-6 (IL-6), and transforming growth factor-beta1 (TGF-beta1) mRNAs in the osteoblast-like cell line MG63. The extracts of the cements in minimal essential medium (MEM) were tested following 1-h and 7-day curing. A semi-quantitative analysis of the cytokine-specific mRNAs was carried out by agarose gel densitometry and expression was compared with the GAPDH housekeeping gene. The ratio between cytokine gene expression and GAPDH expression was calculated. The mRNA specific for the bone-resorbing cytokines IL-1beta and IL-6 was low in basal conditions. IL-1beta mRNA increased only after incubation with the extract of CMW 1 following 1-h curing. The mRNA specific for the bone-resorbing cytokine IL-6 also increased after contact with CMW 1 at both curing times. Sulfix-60 and CMW 3 following 7-day curing, but not after 1 h, induced higher levels of IL-6 mRNA than the control. CMW 2 after 1-h curing constantly determined the expression of IL-6 mRNA, but at low levels. The mRNA specific for TGF-beta1 was also expressed by the MG63 osteoblast-like cells in basal conditions. The levels increased after contact with Sulfix-60 after 7-day curing and with CMW 1 after 1-h curing. CMW 2 after 7-day curing decreased TGF-beta1 mRNA. In conclusion, the highest expression of the cytokines IL-1beta, IL-6, and TGF-beta1 mRNA was determined by CMW 1. If the results are confirmed in vivo, the increased expression of the osteolytic cytokines induced by the bone cement might result in loosening of the prosthesis, even with all the restrictions of an in vitro study on continuous cell lines.

Based on the hypothesis that bone cements cause changes in the production of transforming growth factor-beta 1 (TGF-beta1) by bone cells, the effects of four acrylic bone cements (Sulfix-60, CMW 1, CMW 2 and CMW 3) were examined using the osteoblast-like cell line MG63. The extracts in MEM of the cements were tested, following 1 h- and 7 day-curing. MG63 cells seldom expressed mRNA specific for TGF-beta1 in basal conditions. The cultures expressed mRNA constantly after incubation with the extract of CMW 1 cured for 1 h. TGF-beta1 specific mRNA was seldom expressed after incubation with the other cement extracts. The release of TGF-beta1 into the conditioned medium was increased significantly by CMW 1 extract at 1 h-curing, but was not changed significantly by CMW 1 extract at 7 day-curing and by the extracts of the other cements, at both curing times. The stimulating effect of CMW 1 on the secretion of TGF-beta1, even with all the restrictions of an in vitro study of continuous cell lines, if confirmed in vivo, might favor the development of the synovial-like membrane around the implant, and therefore impair the chance of success of the prosthesis.

Periprosthetic osteolysis is a major clinical problem in total hip and total knee arthroplasty and polymethylmethacrylate (PMMA) is a possible etiologic factor. Recently, increasing importance was ascribed to interleukin-6 (IL-6) as an agent favouring bone resorption. The aim of the present study was to investigate the role of bone cements on IL-6 production by MG63. The effect of four acrylic bone cements (Sulfix-60, CMW 1, CMW 2, and CMW 3) on the protein release and mRNA expression of IL-6 in osteoblast-like cell line MG63 was examined using IL-1beta (0.2 microg ml(-1)) as the positive control. The extracts in minimum essential medium (MEM) of the cements were tested, following 1-h and 7-day curing. CMW 1 and CMW 2 significantly increased the IL-6 release into the culture media (p < 0.01). The cells incubated with Sulfix-60 and CMW 3 produced no significantly different levels of IL-6 than the basal production. A positive correlation was found between the concentration of IL-6 and the contents of benzoylperoxide (p = 0.0003) and barium sulphate (p < 0.0001). MG63 expressed IL-6 mRNA constitutively, as demonstrated by the positivity of the negative controls too. We conclude that CMW 1 and CMW 2 increase the production of IL-6 in MG63 cells. The response to Sulfix-60 and CMW 3 is not significantly greater than the negative control.

Five commercially available bone cements were analysed by high-performance liquid chromatography for detecting the residual content of an accelerator, the amine N,N-dimethyl-p-toluidine (DMPT), after curing. It was found that the concentration of DMPT in aqueous extracts decreases with time, being almost absent 7 days after curing. Differences were noticed among the cements; residual DMPT is higher in cements prepared with higher content of the amine. It is verified that DMPT's toxic effect on cell cultures is dose-related; a delay in the cell replication cycle is induced in vitro. Damage is reversible, thus justifying the low bone cement toxicity that is clinically ascertained.

The effects of orthopaedic cements on the proliferation and cell cycle of in vitro cultured MG63 osteoblast-like cells were examined. Five different cements were mixed and extracted at different time intervals (15 and 60 min, 6, 24 and 48 h). Cell proliferation inhibition (CPI) was evaluated after 72 h culture as the toxicity parameter. As for the toxicity degree, the extracts were considered to have 'high toxicity' (CPI > or = 50%), 'medium toxicity' (50% > CPI > 25%), 'low toxicity' (CPI < or = 25%) and 'no toxicity' (CPI = 0). Cell cycle phases of MG63 cells were evaluated at 24, 48 and 72 h by flow cytometry; the DNA content was assessed using the propidium iodide uptake and the percentage of cells in the S phase was determined using 5'-bromodeoxyuridine uptake. According to our results, the toxicity is inversely correlated with the time interval between polymerization and extract preparation, and is different according to the cement type. For some cements the effects are still observed 48 h after polymerization. The damaging effect is not linked to a specific phase of the cell cycle, nor does it hamper the restarting of cell proliferation at 72 h.

The authors have examined the response of osteoblastic cells in contact in vitro with different acrylic cements used in orthopaedic surgery. The solid and liquid components of the cements were mixed in sterile environments according to the instructions provided by the manufacturers, and placed in contact with the cells 1/2, 1, 4, 6 and 24 hours after triggering of polymerization. The experimental model, that tends to define the kinetics of the release of toxic substances from acrylic cements, allowed to verify 24 hours after polymerization that the three cements had lost their toxic effects, which instead had been present to varying degrees for the first 1-6 hours. Cytomorphological observations did not reveal cellular damage, which instead was very clear when functional tests were used.

The effects of endodontic cements on the cell cycle of MG63 osteoblasts cultured in vitro have been examined. Three groups of compounds were tested. Group I encompassed zinc oxide- and eugenol-based cements (Tubliseal, Argoseal, N2), group II consisted of cements with a phenol group other than eugenol (AH26, Forfenan, Methode R/R), and group III included CaOH-based cements (Biocalex, Endocalex). The cell cycle of MG63 cells was analyzed by flow cytometry; the DNA content was evaluated by means of the propidium iodide uptake method, whereas the proportion of cells in the S phase was defined by the incorporation of bromodeoxyuridine later revealed by a specific antibody. The results showed that some root canal sealers could hamper the periapex healing processes by inhibiting the cell proliferation through a selective action on different phases of the cell cycle.