Search

Background: Prognostic factors for total shoulder arthroplasty (TSA) clinical outcomes are incompletely understood. This study investigates the associations of preoperative patient, disease-specific, and surgical factors with 1-year postoperative PENN Shoulder Score (PSS) in patients undergoing primary TSA., Methods: Cleveland Clinic patients undergoing primary anatomic TSA (aTSA) or reverse TSA (rTSA) for glenohumeral osteoarthritis (GHOA) or rotator cuff tear arthropathy (CTA) between February 2015 and August 2019, and having complete preoperative and 1-year postoperative patient-reported outcome measures (PROMs), were included. Twenty preselected preoperative patient, disease-specific, and surgical factors were used to fit multivariable models for 1-year PSS and its subscores., Results: Of 1427 eligible primary TSAs, 1174 had 1-year follow-up by PROMs (82%), with 1042 analyzed after additional exclusions, including 30% rTSAs for CTA (n = 308), 26% rTSAs for GHOA (n = 275), and 44% aTSAs for GHOA (n = 459). All PROMs showed statistically significant improvements postoperatively, with 89% of patients reaching an acceptable symptom state. Lower 1-year PSS was associated with younger age, female sex, current smoking, chronic pain diagnosis, history of prior surgery, worker's compensation claim, lower preoperative mental health, lower baseline PSS, absence of glenoid bone loss, and diagnosis-arthroplasty type (CTA-rTSA < GHOA-rTSA < GHOA-aTSA). The most important prognostic factors associated with 1-year PSS were diagnosis-arthroplasty type, baseline mental health status, and insurance status., Conclusions: Disease diagnosis, arthroplasty type, and several other baseline factors are strongly and individually associated with PROMs following primary TSA, with patients undergoing aTSA for GHOA demonstrating the highest PROM scores at 1-year follow-up. Patient, disease-specific, and surgical factors can be used to guide postoperative prognosis following primary TSA for improved preoperative patient counseling regarding expected outcomes of these procedures., (Copyright © 2024 The Author(s). Published by Elsevier Inc. All rights reserved.)

Background: Instability after reverse shoulder arthroplasty (RSA) is one of the most frequent complications and remains a clinical challenge. Current evidence is limited by small sample size, single-center, or single-implant methodologies that limit generalizability. We sought to determine the incidence and patient-related risk factors for dislocation after RSA, using a large, multicenter cohort with varying implants., Methods: A retrospective, multicenter study was performed involving 15 institutions and 24 American Shoulder and Elbow Surgeons members across the United States. Inclusion criteria consisted of patients undergoing primary or revision RSA between January 2013 and June 2019 with minimum 3-month follow-up. All definitions, inclusion criteria, and collected variables were determined using the Delphi method, an iterative survey process involving all primary investigators requiring at least 75% consensus to be considered a final component of the methodology for each study element. Dislocations were defined as complete loss of articulation between the humeral component and the glenosphere and required radiographic confirmation. Binary logistic regression was performed to determine patient predictors of postoperative dislocation after RSA., Results: We identified 6621 patients who met inclusion criteria with a mean follow-up of 19.4 months (range: 3-84 months). The study population was 40% male with an average age of 71.0 years (range: 23-101 years). The rate of dislocation was 2.1% (n = 138) for the whole cohort, 1.6% (n = 99) for primary RSAs, and 6.5% (n = 39) for revision RSAs (P < .001). Dislocations occurred at a median of 7.0 weeks (interquartile range: 3.0-36.0 weeks) after surgery with 23.0% (n = 32) after a trauma. Patients with a primary diagnosis of glenohumeral osteoarthritis with an intact rotator cuff had an overall lower rate of dislocation than patients with other diagnoses (0.8% vs. 2.5%; P < .001). Patient-related factors independently predictive of dislocation, in order of the magnitude of effect, were a history of postoperative subluxations before radiographically confirmed dislocation (odds ratio [OR]: 19.52, P < .001), primary diagnosis of fracture nonunion (OR: 6.53, P < .001), revision arthroplasty (OR: 5.61, P < .001), primary diagnosis of rotator cuff disease (OR: 2.64, P < .001), male sex (OR: 2.21, P < .001), and no subscapularis repair at surgery (OR: 1.95, P = .001)., Conclusion: The strongest patient-related factors associated with dislocation were a history of postoperative subluxations and having a primary diagnosis of fracture nonunion. Notably, RSAs for osteoarthritis showed lower rates of dislocations than RSAs for rotator cuff disease. These data can be used to optimize patient counseling before RSA, particularly in male patients undergoing revision RSA., (Copyright © 2023 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.)

Background: Variations in glenoid morphology affect surgical treatment and outcome of advanced glenohumeral osteoarthritis (OA). The purpose of this study was to assess the inter- and intraobserver reliability of the modified Walch classification using 3-dimensional (3D) computed tomography (CT) imaging in a multicenter research group., Methods: Deidentified preoperative CTs of patients with primary glenohumeral OA undergoing anatomic or reverse total shoulder arthroplasty (TSA) were reviewed with 3D imaging software by 23 experienced shoulder surgeons across 19 institutions. CTs were separated into 2 groups for review: group 1 (96 cases involving all modified Walch classification categories evaluated by 12 readers) and group 2 (98 cases involving posterior glenoid deformity categories [B2, B3, C1, C2] evaluated by 11 readers other than the first 12). Each case group was reviewed by the same set of readers 4 different times (with and without the glenoid vault model present), blindly and in random order. Inter- and intraobserver reliabilities were calculated to assess agreement (slight, fair, moderate, substantial, almost perfect) within groups and by modified Walch classification categories., Results: Interobserver reliability showed fair to moderate agreement for both groups. Group 1 had a kappa of 0.43 (95% confidence interval [CI]: 0.38, 0.48) with the glenoid vault model absent and 0.41 (95% CI: 0.37, 0.46) with it present. Group 2 had a kappa of 0.38 (95% CI: 0.33, 0.43) with the glenoid vault model absent and 0.37 (95% CI: 0.32, 0.43) with it present. Intraobserver reliability showed substantial agreement for group 1 with (0.63, range 0.47-0.71) and without (0.61, range 0.52-0.69) the glenoid vault model present. For group 2, intraobserver reliability showed moderate agreement with the glenoid vault model absent (0.51, range 0.30-0.72), which improved to substantial agreement with the glenoid vault model present (0.61, range 0.34-0.87)., Discussion: Inter- and intraobserver reliability of the modified Walch classification were fair to moderate and moderate to substantial, respectively, using standardized 3D CT imaging analysis in a large multicenter study. The findings potentially suggest that cases with a spectrum of posterior glenoid bone loss and/or dysplasia can be harder to distinguish by modified Walch type because of a lack of defined thresholds, and the glenoid vault model may be beneficial in determining Walch type in certain scenarios. The ability to reproducibly separate patients into groups based on preoperative pathology, including Walch type, is important for future studies to accurately evaluate postoperative outcomes in TSA patient cohorts., (Copyright © 2020 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.)

Background: The purpose of this study was to quantify correction of glenoid deformity and humeral head alignment in anatomic total shoulder arthroplasty as a function of preoperative pathology (modified Walch classification) and glenoid implant type in a clinical cohort using 3-dimensional computed tomography (CT) analysis., Methods: Patients undergoing anatomic total shoulder arthroplasty with a standard glenoid (SG) (n = 110) or posteriorly stepped augmented glenoid (AG) (n = 62) component were evaluated with a preoperative CT scan and a postoperative CT scan within 3 months of surgery. Glenoid version, inclination, and medial-lateral (ML) joint line position, as well as humeral head alignment, were assessed on both CT scans, with preoperative-to-postoperative changes analyzed relative to pathology and premorbid anatomy based on the modified Walch classification and glenoid implant type., Results: On average, correction to the premorbid ML joint line position was significantly less in type A2 glenoids than in type A1 glenoids (-2.3 ± 2.1 mm vs. 1.1 ± 0.9 mm, P < .001). Correction to premorbid version was not different between type B2 glenoids with AG components and type A1 glenoids with SG components (-1.7° ± 6.6° vs. -1.0° ± 4.0°, P = .57), and the premorbid ML joint line position was restored on average in both groups (0.3 ± 1.6 mm vs. 1.1 ± 0.9 mm, P = .006). Correction to premorbid version was not different between type B3 glenoids with AG components and type A1 glenoids with SG components (-0.6° ± 5.1° vs. -1.0° ± 4.0°, P = .72), but correction relative to the premorbid ML joint line position was significantly less in type B3 glenoids with AG components than in type A1 glenoids with SG components (-2.2 ± 2.1 mm vs. 1.1 ± 0.9 mm, P < .001). Postoperative humeral glenoid alignment was not different in any group comparisons., Discussion: In cases with posterior glenoid bone loss and retroversion (type B2 or B3 glenoids), an AG component can better correct retroversion and the glenoid ML joint line position compared with an SG component, with correction to premorbid version comparable to a type A1 glenoid with an SG component. However, restoration of the premorbid ML joint line position may not always be possible with SG or AG components in cases with more advanced central glenoid bone loss (type A2 or B3 glenoids). Further follow-up is needed to determine the clinical consequences of these findings., (Copyright © 2020 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.)

Background: The primary objectives of this study were to evaluate the ability of a posteriorly stepped augmented glenoid component, used in patients with primary glenohumeral osteoarthritis with B2 or B3 glenoid morphology, to correct preoperative retroversion and humeral head subluxation and to identify factors associated with radiographic radiolucency and patient-reported clinical outcomes., Methods: We identified 71 shoulders with B2 or B3 glenoid morphology that underwent anatomic total shoulder arthroplasty with use of a posteriorly stepped augmented glenoid component and with a preoperative 3-dimensional computed tomography (3D-CT) scan and a minimum of 2 years of clinical and radiographic follow-up. The Penn Shoulder Score (PSS), shoulder range of motion, glenoid center-peg osteolysis, and postoperative version and humeral head subluxation were the main outcome variables of interest., Results: Follow-up was a median of 2.4 years (range, 1.9 to 5.7 years); the mean patient age at treatment was 65 ± 7 years (range, 51 to 80 years). PSS, range of motion, humeral head centering, and glenoid version were significantly improved among all patients (p < 0.0001). Patients with persistent posterior subluxation of the humeral head postoperatively had worse preoperative fatty infiltration of the teres minor and greater postoperative component retroversion (p < 0.05). Patients with center-peg osteolysis had more preoperative joint-line medialization and posterior glenoid bone loss (p < 0.05). Patients with more preoperative humeral head posterior subluxation had a lower PSS, adjusting for confounders (p < 0.05)., Conclusions: Posteriorly stepped augmented glenoid components can improve pathologic retroversion and posterior subluxation of the humeral head in B2 and B3 glenoids, with significant improvements found in clinical outcome scores at a minimum of 2 years of follow-up in the vast majority of patients., Level of Evidence: Therapeutic Level IV. See Instructions for Authors for a complete description of levels of evidence.

Abstract Intra-articular injection of hyaluronic acid (HA) is used to treat osteoarthritis (OA) as a viscosupplement, yet it only provides short-term benefit because HA is cleaved by hyaluronidase and cleared out of the joint after several days. Therefore, we developed a new polymer biolubricant based on poly-oxanorbornane carboxylate to enhance joint lubrication for a prolonged time. Rheological and biotribological studies of the biolubricant reveal viscoelastic properties and coefficient of friction equivalent and superior to that of healthy synovial fluid, respectively. Furthermore, in an ex vivo bovine cartilage plug model, the biolubricant exhibits superior long-term reduction of friction and wear prevention compared to saline and healthy synovial fluid. ISO 10993 biocompatibility tests demonstrate that the biolubricant polymer is non-toxic. In an in vivo rat medial meniscal tear OA model, where the performance of the leading HA viscosupplement (Synvisc-one®) is comparable to the saline control, treatment with the biolubricant affords significant chondroprotection compared to the saline control. [ABSTRACT FROM AUTHOR]