Search

Unreliable mobility values, and particularly greatly overestimated values and severely distorted temperature dependences, have recently hampered the development of the organic transistor field. Given that organic field‐effect transistors (OFETs) have been routinely used to evaluate mobility, precise parameter extraction using the electrical properties of OFETs is thus of primary importance. This review examines the origins of the various mobilities that must be determined for OFET applications, the relevant extraction methods, and the data selection limitations, which help in avoiding conceptual errors during mobility extraction. For increased precision, the review also discusses device fabrication considerations, calibration of both the specific gate‐dielectric capacitance and the threshold voltage, the contact effects, and the bias and temperature dependences, which must actually be handled with great care but have mostly been overlooked to date. This review serves as a systematic overview of the OFET mobility extraction process to ensure high precision and will also aid in improving future research. [ABSTRACT FROM AUTHOR]

Close correlation between low-frequency noise and charge transport in pentacene transistors is observed. The trap density evolving with pentacene deposition reveals transformation of growth phase and different transport mechanisms. It explains the greatly altered mobility and contact resistance in which the upper surface's trapping plays an important role. Inspecting contact noise shows high density of traps at contacts that result possibly from pyramid like growth of pentacene or contact damage or both. [ABSTRACT FROM AUTHOR]

Charge Carrier Mobility: Precise Extraction of Charge Carrier Mobility for Organic Transistors (Adv. Funct. Keywords: mobility; organic transistors; parameter extraction; reliability EN mobility organic transistors parameter extraction reliability 1 1 1 05/18/20 20200515 NES 200515 Charge carriers (electrons and holes) transport in between the source and drain electrodes in an organic transistor, which is the building block of organic circuits. Mobility, organic transistors, parameter extraction, reliability. [Extracted from the article]

The reliability of mobility has come to be a critical issue to the development of new electronics especially for organic electronics, since mobility is typically extracted from field‐effect transistors containing various extrinsic effects and overestimation is popular in the literature. Recently, this issue is emphasized and a reliability factor (r) is proposed by pioneers to gauge the mobility reported. Albeit many factors discussed, how much the extrinsic effects influence r remains unrevealed and a facile solution by using organic transistors is still lacking. Here, it is shown that the widely used extraction method based on the saturation transfer characteristics is sensitive to contact effect and temperature with r dropping to 43%, indeed leading to large mobility overestimation. By contrast, the linear‐regime methods are more reliable particularly the Y‐function method that demonstrates great reliability (r ≈ 100%) even for short‐channel transistors at ultralow temperatures. In addition, operating in saturation regime induces ambipolar conduction further deteriorating reliability if contact doping is absent. High Schottky barriers, on the other side, distort device characteristics making extraction impossible. The results of this study reveal that, aside from device optimizations, selecting a right method is essential for reliable and precise evaluation of the carrier mobility by using organic transistors. This paper systematically addresses the essential effects on the mobility extraction reliability. The effects related to specific dielectric capacitance, operating regime, channel length, temperature, ambipolar conduction, and Schottky barrier are examined in a quantitative way. The results of this study show that, aside from device optimizations, selecting a proper extraction method is important to reliable mobility evaluation using organic transistors. [ABSTRACT FROM AUTHOR]

Highlights: [•] Optimal contacts should have smallest size but possess minimum contact effects. [•] Six times of semiconductor film thickness is found to be optimal for contact length. [•] It increases in nanoscale channels with more hopping and anisotropic transport. [•] This optimal contact length is independent of semiconductors and variable mobility. [ABSTRACT FROM AUTHOR]

Abstract: Measurements of power spectral density (PSD) of low-frequency noise (LFN) in pentacene field-effect transistors reveal the preponderance of a 1/f-type PSD behavior with the amplitude varying as the squared transistor gain and increasing as the inverse of the gate surface area. Such features impose an interpretation of LFN by carrier number fluctuations model involving capture/release of charges on traps uniformly distributed over the gate surface. The surface slow trap density extracted by the noise analysis is close to the surface states density deduced independently from static I(V) data, which confirms the validity of the proposed LFN interpretation. Further, we found that the trap densities in bottom-contact (BC) devices were higher than in their top-contact (TC) counterparts, in agreement with observations of a poorer crystal structure of BC devices, in the contact regions in particular. At the highest bias the noise originating from the contact resistance is also shown to be a dominant component in the PSD, and it is well explained by the noise originating from a gate-voltage dependent contact resistance. A gate area scaling was also performed, and the good scaling and the dispersion at the highest bias confirm the validity of the applied carrier number fluctuations model and the predominant contact noise at high current intensities. [Copyright &y& Elsevier]