Search

Organic dye semiconductors have received increasing attention as the next generation of semiconductors, and one of their potential applications is as a core component of organic transistors. In this study, two novel diketopyrrolopyrrole (DPP) dye core-based materials were designed and separately prepared using Stille coupling reactions under different palladium catalyst conditions. The molecular weights and elemental compositions were tested to demonstrate that both catalysts could be used to successfully prepare materials of this structure, with the main differences being the weight-average molecular weight and the dispersion index. PDPP-2Py-2Tz I with a longer conjugation length exhibited better thermodynamic stability than the counterpart polymer PDPP-2Py-2Tz II. The intrinsic optical properties of the polymers were relatively similar, while the electrochemical tests showed small differences in their energy levels. The polymers obtained with different catalysts displayed similar and moderate electron mobility in transistor devices, while PDPP-2Py-2Tz I possessed a higher switching ratio. Our study provides a comparison of such dye materials under different catalytic conditions and also demonstrates the great potential of dye materials for optoelectronic applications. [ABSTRACT FROM AUTHOR]

Organic polymer semiconductor materials are conveniently tuned to energy levels because of their good chemically modifiable properties, thus enhancing their carrier transport capabilities. Here, we have designed and prepared a polymer with a donor-acceptor structure and tested its potential as a p-type material for organic field-effect transistor (OFET) applications using a solution-processing method. The conjugated polymers, obtained via the polymerization of the two monomers relying on the Stille coupling reaction, possess extremely high molecular weights and thermodynamic stability. Theoretical-based calculations show that PDPP-2S-Se has superior planarity, which is favorable for carrier transport within the main chain. Photophysical and electrochemical measurements systematically investigated the properties of the material and the energy levels with respect to the theoretical values. The maximum hole mobility of the PDPP-2S-Se-based OFET device is 0.59 cm2 V−1 s−1, which makes it a useful material for potential organic electronics applications. [ABSTRACT FROM AUTHOR]

Organic polymer semiconductor materials, due to their good chemical modifiability, can be easily tuned by rational molecular structure design to modulate their material properties, which, in turn, affects the device performance. Here, we designed and synthesized a series of materials based on terpolymer structures and applied them to organic thin-film transistor (OTFT) device applications. The four polymers, obtained by polymerization of three monomers relying on the Stille coupling reaction, shared comparable molecular weights, with the main structural difference being the ratio of the thiazole component to the fluorinated thiophene (Tz/FS). The conjugated polymers exhibited similar energy levels and thermal stability; however, their photochemical and crystalline properties were distinctly different, leading to significantly varied mobility behavior. Materials with a Tz/FS ratio of 50:50 showed the highest electron mobility, up to 0.69 cm2 V−1 s−1. Our investigation reveals the fundamental relationship between the structure and properties of materials and provides a basis for the design of semiconductor materials with higher carrier mobility. [ABSTRACT FROM AUTHOR]

The development of n-type organic semiconductor materials for transporting electrons as part of logic circuits is equally important to the development of p-type materials for transporting holes. Currently, progress in research on n-type materials is relatively backward, and the number of polymers with high electron mobility is limited. As the core component of the organic field-effect transistor (OFET), the rational design and judicious selection of the structure of organic semiconductor materials are crucial to enhance the performance of devices. A novel conjugated copolymer with an all-acceptor structure was synthesized based on an effective chemical structure modification and design strategy. PDPPTT-2Tz was obtained by the Stille coupling of the DPPTT monomer with 2Tz-SnMe3, which features high molecular weight and thermal stability. The low-lying lowest unoccupied molecular orbital (LUMO) energy level of the copolymer was attributed to the introduction of electron-deficient bithiazole. DFT calculations revealed that this material is highly planar. The effect of modulation from a donor–acceptor to acceptor–acceptor structure on the improvement of electron mobility was significant, which showed a maximum value of 1.29 cm2 V−1 s−1 and an average value of 0.81 cm2 V−1 s−1 for electron mobility in BGBC-based OFET devices. Our results demonstrate that DPP-based polymers can be used not only as excellent p-type materials but also as promising n-type materials. [ABSTRACT FROM AUTHOR]