Search

Abstract In this study, the utilization of a dry film photoresist (DFR) was explored for fabricating a patterned insulating layer in Ag nanowire (AgNW) bottom electrodes with various designs for flexible organic light-emitting diodes (OLEDs). With a single hot-pressing step, a pre-patterned DFR insulator was attached onto the AgNW electrodes, thus forming insulated electrodes in desired patterns. In the same hot-pressing step, AgNWs were also embedded into poly(methyl methacrylate), which sufficiently reduced the root mean square (RMS) roughness (~5 nm) for use in OLED lighting. Using DFR, AgNW electrodes with various shapes were fabricated to realize shaped flexible OLED lighting. The performance of OLED lighting employing the AgNW/patterned-DFR insulator electrode was comparable to that of indium‑tin-oxide-based OLED lighting. Further, the DFR insulator was utilized as a planarization layer in a paper-based OLED lighting, which operated well with a turn-on voltage of 3.5 V and maximum luminance of 157 cd/m2 at 7.5 V. Graphical abstract Unlabelled Image Highlights • Ag nanowire flexible transparent electrodes with root mean square below 5 nm were fabricated by a single hot pressing process • By using pre-patterned dry film photoresist, shaped Ag nanowire electrodes were fabricated in the same hot pressing process • Flexible organic light-emitting diode lightings with various designs were realized with the fabricated electrodes • Paper-based organic light-emitting diode lighting was realized using a dry film photoresist planarization layer [ABSTRACT FROM AUTHOR]

We have interfaced an array of polymer light emitting diodes (OLEDs) fabricated onto a glass substrate to a sheet of paper via a pressure sensitive conducting adhesive. By screen printing a series of capacitive touch pads and connecting tracks onto paper using a low-cost conductive graphite ink, we are able to drive individual pixels in the OLED array via CMOS-based electronics that are also attached to the paper. Three AA batteries are used to power the CMOS electronics, touch pads and the OLED array, with pixels in the array operating at a brightness of up to 210 cd/m2. The work highlights a practical interface between plastic- and paper-based electronics. [ABSTRACT FROM PUBLISHER]