Search

Half titanocenes (CpCH2CH2O)TiCl21 and (CpCH2CH2 OCH3)TiCl32, activated by methylaluminoxane are tested in styrene–1,3-butadiene copolymerization. The titanocene 1 is able to copolymerize styrene and 1,3-butadiene, with a facile procedure, to give products with high molecular weight. The analysis of microstructure by 13C-NMR reveals that the styrene homosequences in copolymers are in syndiotactic arrangement, while the butadiene homosequences are, prevailingly, in 1,4-cis configuration, according with behavior of 1 in the homopolymerizations of styrene and 1,3-butadiene, respectively. The reactivity ratios of copolymerization are estimated by diad composition analysis. All obtained copolymers have r1 × r2 values much larger than 1, indicating blocky nature of homosequences. The structural characterization by wide-angle X-ray powder diffraction and differential scanning calorimetry indicates that all copolymers are crystalline, with Tm varying from 171 to 239 °C, depending on the styrene content. The titanocene 2 did not succeed in styrene–1,3-butadiene copolymerization, giving rise to a blend of homopolymers. Compounds 1 and 2 were also tested in the polymerization of several conjugated dienes, and the obtained results were very useful to rationalize the behavior of both catalysts in the copolymerization of styrene and butadiene. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 815–822, 2010

Random styrene-ethylene copolymers have been synthesized by the hydrogenation of styrene-butadiene copolymers. The samples were characterized by 13 C NMR spectroscopy, X-ray powder diffraction, thermal analysis, and Fourier transform IR (FTIR) spectroscopy. In the 13 C NMR spectra, the resonance of the methylene carbon next to a methine bearing a phenyl group presents splitting due to its diastereotopic positions with respect to the phenyl substituents of the second and third inserted styrene units. A definitive assignment of the resonances of the SEES sequences (S = styrene, E = ethylene) was obtained by synthesis of a suitable model compound: 5,10-diphenyl-pentadecane. X-ray powder diffraction and thermal analysis show that these samples are amorphous. This is probably due to the shortness of the ethylene and styrene sequences in the copolymers. DSC thermograms show a single glass transition, at a intermediate temperature, between the Tg values of polystyrene and polyethylene, depending on the styrene content in the chain. FTIR spectra indicate the presence of styrene sequences in an isotactic arrangement.

The relationships between the structure and the viscoelastic properties of freeze/thaw PVA hydrogels obtained by repeatedly freezing and thawing dilute solutions of PVA in D 2 O(11% w/w PVA) in as-prepared and rehydrated states are investigated. Our results indicate that the PVA chains and solvent molecules are organized at different hierarchical length scales, which include the presence of micro-and macro-pores, into a network scaffolding. The porous network is ensured by the presence of crystallites, which act as knots interconnected by portions of PVA chains swollen by the solvent. X-ray diffraction and SANS techniques are used to obtain structural information at short (angstroms) and medium (nanometers) ranges of length scales, concerning the crystallinity, the size of small crystalline aggregates and the average distance between crystallites in PVA hydrogels. Indirect information concerning the structural organization on the large length scales (microns) are provided by viscoelastic measurements. The dynamic shear elastic moduli at low frequency and low strain amplitude, G', are determined and related to the degree of crystallinity. These data indicate that a minimum crystallinity of 1% is required for these PVA samples to exhibit gel behaviour and have allowed obtaining the order of magnitude of the average mesh size in these gels. Finally, it is shown that the negative effect of aging, inducing worse physical and mechanical properties in these systems, may be prevented using a drying/re-hydration protocol able to keep the physical properties of the as-prepared PVA hydrogels.

The structure of physical poly(vinyl alcohol) (PVA) hydrogels prepared by subjecting a PVA/D2O solution (11% w/w PVA) to freeze (−22 °C)/thaw (+25 °C) cycles has been systematically investigated by X-ray powder diffraction technique as a function of the number of cycles and aging time. The structural analysis has been extended to PVA “dried gels” and PVA hydrogels obtained by rehydrating the dried samples. The results of the present analysis confirm that highly stable PVA hydrogels, with a water uptake higher than 80%, may be obtained upon freeze/thaw cycles. The X-ray diffraction profiles of PVA hydrogels have been interpreted in terms of three components: “free water”, crystalline PVA aggregates, and swollen amorphous PVA. The degree of crystallinity and the size of the crystals increase with increasing the number of freeze/thaw cycles and the aging time. Our results support the hypothesis that PVA hydrogels have a porous structure, with pores mainly occupied by water. The porous walls consist of swoll...

The structure and rheological behavior of atactic poly(vinyl alcohol) (a-PVA) hydrogels prepared by freeze/thaw cycles were investigated as a function of polymer concentration and number of freeze/thaw cycles. The presence of phases with different mobilities was observed using 13 C CP/MAS and DP/MAS NMR experiments. The degree of crystallinity of the a-PVA-rich phase was determined by 1 H NMR free decay experiments. Measurements of the shear storage and loss modulus were performed at a fixed frequency of 1 Hz and a strain value of 0.1%, i.e. under conditions where the deformation imposed on the gel structure is entirely reversible. Results thus obtained showed that an increase in the number of freeze/thaw cycles induces an increase in the degree of crystallinity in the polymer-rich phase together with an increase in the storage modulus. The a-PVA hydrogels became more fragile as the number of freeze/thaw cycles was increased. Moreover, both the percentage of protons in a rigid environment measured by 1 H NMR and the storage modulus values tended to a limiting value after six freeze/thaw cycles. These results show that the first five or six freeze/thaw cycles play a very important role in determining the hydrogel structure and rheological properties. A more detailed comparison of NMR and rheological data led to the conclusion that the storage modulus is mainly controlled by the a-PVA crystallinity while the hydrogen bond interactions have a much smaller contribution.

In this work, we report the application of a sol–gel derived ZnO thin film as a buffer layer for high efficiency inverted polymer solar cells. ZnO films are widely used in such devices because they have a relatively high electron mobility, high transparency and environmental stability. The ZnO precursor was prepared by dissolving zinc acetate and ethanolamine in the 2-methoxyethanol. ZnO thin films were then deposited on indium tin oxide (ITO)/glass substrates by spin coating the above solution. Inverted polymer solar cells with the configuration ITO/ZnO/photoactive layer/MoOx/Ag were realized in order to investigate the performance of ZnO thin film. The photoactive layer is a blend of poly[(4,8-bis-(2-ethylhexyloxy)-benzo[1,2-b;4,5-b′]dithiophene)-2,6-diyl-alt-(4-(2-ethylhexanoyl)-thieno[3,4-b]thiophene)-2,6-diyl] (PBDTTT-C) and [6,6]-phenyl C71 butyric acid methyl ester ([70]PCBM) (1:1.5 w/w). We made a comparative study of the photovoltaic behavior of devices with ZnO films deposited using different sol–gel recipes. In particular, we varied the zinc acetate/ethanolamine molar ratio to have ZnO films with different trace amounts of starting materials. In addition we also prepared ZnO films annealed at 200 °C for different times (from 5′ to 60′) in order to evaluate this effect on the trace amount removal. © 2014, Springer Science+Business Media New York.

The structure and thermal properties of a new class of isotactic copolymers of ethylene (E)/4-methyl-1,3-pentadiene (4MPD) with 4MPD content in the range 40–73 mol % and of isotactic poly-1,2-(4-methyl-1,3-pentadiene) (iP4MPD) homopolymer have been analyzed. The copolymers have been synthesized using 1,4-dithiabutanediyl-linked bis(phenolate) titanium complexes as catalyst precursors, activated by methylaluminoxane. Solution 13C NMR analysis reveals the tendency of the catalyst system to produce copolymers with alternating 4MPD/E constitution. All copolymers are crystalline and show melting temperatures in the range 90–100 °C. The samples with nearly equimolar concentration of units crystallize in a new crystalline form because of the alternating constitution. Structural analysis indicates that in this new form the alternating 4MPD-E sequences assume a nearly trans-planar conformation with periodicity c = 5.13 Å and are arranged in a monoclinic unit cell with parameters a = 5.70 Å, b (unique axis) = 14.95 Å, c (chain axis) = 5.13 Å, and β = 114.4°, according to the space group symmetry Pn.

In this work we made a comparative study between the electrical performances of three different electron transport layers (ETLs), used to build inverted polymer solar cells (PSCs). Two different metal oxides are prepared with a solution process: the first one is zinc oxide, prepared by a solgel procedure dissolving zinc acetate and ethanolamine in the 2-methoxyethanol, the second one is titanium oxide, prepared by spin coating a solution of commercial Titanium(IV)-isoproxide in 2-methoxyethanol. The last ETL is an alcohol soluble conjugated polymer: poly[(9,9-bis(3′-(N, N-dimethylamino)propyl)-2,7-fluorene)-alt-2,7-(9,9-dioctylfluorene)](PFN). Inverted PSCs with the configuration glass/ITO/ETL/photoactive layer/MoO3/Ag were realized in order to investigate the performance of different ETL thin films. The photoactive layer was a blend of poly[(4,8-bis-(2-ethylhexyloxy)-benzo[1,2-b;4,5-b′] dithiophene)-2,6-diyl-alt-(4-(2-ethylhexanoyl)-thieno[3,4-b]thiopene)-2,6-diyl] and [6,6]-phenyl C71 butyric acid methyl ester. The best power conversion efficiency (6.4%) under simulated AM1.5G illumination of 100 mW/cm2, was achieved for the PSCs fabricated using a ZnO and PFN films.

Molecular dynamics simulations were employed in bulk polyisobutylene, to provide a detailed characterization of the methyl dynamics and to examine its relation to the β-relaxation as described by different experimental techniques. The simulation results were compared to new 13C NMR measurements probing methyl motion at temperatures above the glass transition, as well as to lower temperature literature NMR data. It was found that the 13C NMR results, and those for the β-relaxation reported by dielectric relaxation spectroscopy and neutron scattering experiments, can be interpreted on a common basis through a coupling mechanism between methyl rotation and a recently described fast relaxation motion associated with the chain backbone. In addition, a molecular mechanism for the description of the dielectric β-process observed in polyisobutylene is proposed, and investigated by simulations.

In this paper we present the synthesis and characterization of two novel copolymers obtained from a bithiophene unit carrying octylsulfanyl side chains and thienothiophene units substituted with keto (PK) or ester (PE) groups. Their structural, electrochemical and photophysical properties were investigated by gel permeation chromatography (GPC), thermogravimetric analysis (TGA), NMR, UV-visible-NIR spectroscopy, cyclic voltammetry (CV) and atomic force microscopy (AFM). They possess good solubility in common organic solvents, filmability, proneness to form π-stacks, moderate solvatochromism, good thermal stability and low band gap energy. They were tested as donor materials in combination with [70]PCBM (electron acceptor) in bulk-heterojunction polymer solar cells. The geometry of the devices is: glass/ITO/PEDOT:PSS/copolymer:[70]PCBM/Ca/Al. The external quantum efficiency curve of the best device, realized using a blend of PK : [70]PCBM, 1 : 2 weight ratio, shows a broad response from 350 to 1000 nm. The power conversion efficiency under 100 mW cm-2 AM 1.5G illumination is greater than 1%. © 2014 The Royal Society of Chemistry.

C2-symmetric group 4 metallocenes based catalysts (rac-[CH2(3-tert-butyl-1-indenyl)2]ZrCl2(1), rac-[CH2(1-indenyl)2]ZrCl2(2) and rac-[CH2(3-tert-butyl-1-indenyl)2]TiCl2(3)) are able to copolymerize styrene and 1,3-butadiene, to give products with high molecular weight. In agreement with symmetry properties of metallocene precatalysts, styrene homosequences are in isotactic arrangements. Full determination of microstructure of copolymers was obtained by 13C NMR and FTIR analysis and it reveals that insertion of butadiene on styrene chain-end happens prevailingly with 1,4-trans configuration. In the butadiene homosequences, using zirconocene-based catalysts, the 1,4-trans arrangement is favored over 1,4-cis, but the latter is prevailing in the presence of titanocene (3). Diad composition analysis of the copolymers makes possible to estimate the reactivity ratios of copolymerization: zirconocenes (1) and (2) produced copolymers having r1 × r2 = 0.5 and 3.0, respectively (where 1 refers to styrene and 2 to butadiene); while titanocene (3) gave tendencially blocky styrene–butadiene copolymers (r1 × r2 = 8.5). The copolymers do not exhibit crystallinity, even when they contain a high molar fraction of styrene. Probably, comonomer homosequences are too short to crystallize (ns = 16, in the copolymer at highest styrene molar fraction). © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1476–1487, 2008