Search

Rationale High-resolution mass spectrometry based non-targeted screening has a huge potential for applications in environmental sciences, engineering and regulation. However, it produces large datasets for which full appropriate processing is a real challenge; the development of processing software is the last building-block to enable large-scale use of this approach. Methods A new software application, SPIX, has been developed to extract relevant information from high-resolution mass spectral datasets. Dealing with intrinsic sample variability and reducing operator subjectivity, it opens up opportunities and promising prospects in many areas of analytical chemistry. SPIX is freely available at: http://spix.webpopix.org. Results Two features of the software are presented in the field of environmental analysis. An example illustrates how SPIX reveals photodegradation reactions in wastewater by fitting kinetic models to significant changes in ion abundance over time. A second example shows the ability of SPIX to detect photoproducts at trace amounts in river water, through comparison of datasets from samples taken before and after irradiation. Conclusions SPIX has shown its ability to reveal relevant modifications between two series of large datasets, allowing, for instance, the study of the consequences of a given event on a complex substrate. Most of all - and it is to our knowledge the only software currently available allowing this - it can reveal and monitor any kind of reaction in all types of mixture.

International audience; The UV-vis photodegradation of-tocopherol was investigated in a model system and in a cosmetic emulsion. Both gas chromatography coupled with tandem mass spectrometry (GC-MS/MS) and high performance liquid chromatography coupled with ultrahigh resolution Fourier transform ion cyclotron resonance mass spectrometry (LC-UHR-MS) were used for photoproducts structural identification. Nine photoproduct families were detected and identified based on their mass spectra and additional experiments with-tocopherol-d 9 ; phototransformation mechanisms were postulated to rationalize their formation under irradiation. In silico QSAR (Quantitative Structure Activity Relationship) toxicity predictions were conducted with the Toxicity Estimation Software Tool (T.E.S.T.). Low oral rat LD50 values of 466.78 mg kg −1 and 467.9 mg kg −1 were predicted for some photoproducts, indicating a potential toxicity more than 10 times greater that of-tocopherol (5742.54 mg kg −1). In vitro assays on Vibrio fischeri bacteria showed that the global ecotoxicity of the-tocopherol solution significantly increases with irradiation time. One identified product should contribute to this ecotoxicity enhancement since in silico estimations for D. magna provide a LC50 value 4 times lower than that of the parent molecule.

The photodegradation of benzisothiazolinone was studied in water under UV–Vis irradiation and led to fourteen photoproducts. Chemical structures of these compounds were elucidated using GC-MS, LCMS/MS, and FT-ICR-MS experiments. Based on the chemical structures determined and their appearance order, a photo induced-degradation mechanism of benzisothiazolinone has been proposed, which combines isomerization, oxidation, hydroxylation, hydrolysis, and elimination processes. In silico tests on mutagenicity, Fathead minnow LC50 and oral rat LD50 were carried out to estimate the toxicity of the photoproducts. Compared with experimental data, the calculated oral rat LD50 values were found to be the most relevant and thus used for toxicity estimation. The photoproducts including a phenolic or a sulfino group or both functions were found potentially more toxic than benzisothiazolinone.

Rationale Cyprodinil is a fungicide active on grapes, strawberries, tomatoes, and many other fruits. Under UV–visible irradiation, it undergoes photodegradation through various processes to form transformation products (TPs) whose structures and potential toxicities are unknown. The structures of the TPs were elucidated by comparing the photodegradation of cyprodinil and cyprodinil-D5. The potential toxicities of these compounds were compared with that of cyprodinil. Methods Aqueous solutions of cyprodinil were irradiated in a reactor equipped with a mercury vapor lamp. Analyses were carried out using high-performance liquid chromatography coupled to a quadrupole time-of-flight (QTOF) mass spectrometer or to a SolarixXR 9.4 Tesla Fourier transform (FT) mass spectrometer. High-resolution mass measurements, MS/MS and isotopic labeling experiments allowed structural elucidation of the cyprodinil TPs. The toxicities were estimated by three tests in silico using the TEST software and in vitro bioassays using Vibrio fischeri bacteria. These bioassays were carried out on irradiated solution for several exposure times and non-irradiated solutions. Results The structures of 19 photoproducts were characterized by LC/HRMS/MS after 4 h of irradiation of a cyprodinil aqueous solution. The use of cyprodinil-D5 allowed the TPs to be characterized with more confidence. Knowing the structure of the TPs allows the estimation of their potential toxicities by in silico tests. Most of the photoproducts are potentially more toxic than the parent compound, based on the oral rat LD50 values, and most of them might induce more developmental and mutagenic toxicities. In vitro assays on Vibrio fischeri bacteria showed that the global ecotoxicity of the cyprodinil solution significantly increases with irradiation time. Conclusions Structures of photoproducts were characterized after irradiation of a cyprodinil aqueous solution combining LC/HRMS, LC/HRMS/MS and the use of a labeled compound. Their formations imply several photodegradation reactions, namely direct bond cleavages, cyclization, isomerization and hydroxylation. Most of the TPs exhibit a toxicity significantly higher than that of the parent molecule. Copyright © 2016 John Wiley & Sons, Ltd.

International audience; Perfluorocarbons, a class of fully fluorinated compounds, are highly persistent and toxic pollutants that are receiving increasing attention due to their widespread environmental distribution. In this study, attention was focused on one compound in particular, namely, perfluorooctanoic acid (PFOA). The first investigation of the UV/VUV photochemistry of the PFOA anion in the gas phase by action spectroscopy of selected ions is reported. Two main relaxation channels were identified: photodissociation and photodetachment. Absolute cross sections for the individual observed processes were measured. DFT calculations and natural transition orbital analysis were carried out to help in the interpretation of the experimental results.

RATIONALE The present work is devoted to the structural elucidation of by-products issued from the direct ultraviolet-visible (UV-vis) irradiation of dehydroacetic acid (DHA) in solution and in cosmetic emulsion. METHODS Analyses were carried out using gas chromatography coupled with ion trap mass spectrometry and by high-performance liquid chromatography coupled with ultrahigh-resolution Fourier transform ion cyclotron resonance mass spectrometry (LC/UHRMS). The potential toxicities of by-products were estimated by in silico calculations based on a QSAR (Quantitative Structure-Activity Relationship) approach and by in vitro bioassays conducted on Vibrio fischeri bacteria. RESULTS Three photoproducts were detected by LC/MS while one photoproduct was detected by GC/MS. The first photoproduct (PP1) corresponds to an isomer of DHA while two isomeric compounds correspond to dimeric structures. The oral rat LD50 of PP1 was evaluated to be 4.5 times lower than that of the parent molecule which classes it in the category 'moderately toxic' on the Hodge and Sterne toxicity classification. In vitro assays on Vibrio fischeri bacteria showed that the global ecotoxicity of the DHA solution increases with irradiation time. CONCLUSIONS With the exception of one photoproduct, the structures proposed for the photoproducts on the basis of mass spectral interpretation have not been reported in previous studies. All photoproducts, with the exception of dimers, were detected after irradiation in the cosmetic emulsion. This result shows that personal care products containing DHA must be protected from direct sunlight to prevent photodegradation.

RATIONALE Metolachlor is one of the most intensively used chloroacetanilide herbicides in agriculture. It has been detected in water; consequently, under UV-visible irradiation, it can be transformed in degradation products (TPs). The structures of TPs were elucidated by liquid chromatography/high-resolution tandem mass spectrometry (LC/HR-MS/MS). The potential toxicities of these TPs were estimated by in silico tests. METHODS Aqueous solutions of metolachlor were irradiated in a self-made reactor equipped with a mercury vapor lamp. Analyses were carried out using high-performance liquid chromatography coupled to quadrupole time-of-flight (QTOF) mass spectrometer. High-resolution m/z measurements, MS/MS and isotopic labeling experiments allowed structural elucidation of metolachlor TPs. Their toxicities were estimated in silico, using the T.E.S.T. RESULTS Ten major metolachlor photoproducts were characterized by LC/MS/MS after irradiation of metolachlor in aqueous solution. Elucidation of their chemical structures was identified using high-resolution measurements and MS/MS experiments. They resulted from the combination of dehalogenation, hydroxylation and cyclisation processes. The potential oral rat lethal dose (LD50) was assessed with QSAR tests for metolachlor and each photoproduct. Results indicate that most of the TPs are much more toxic than metolachlor. CONCLUSIONS UV-vis irradiation of metolachlor in aqueous solution leads to the formation of ten photoproducts. QSAR estimations show that the location of added hydroxyl group(s) is of key relevance as regards to biological activity and that routine water analysis should take into account the TPs are more toxic than the parent molecule.

Rationale Fenbuconazole is a fungicide commonly used for the protection of vineyards, vegetables and grain crops. Under UV-visible irradiation, it undergoes isomerization through various cyclization processes. Isomeric structures were elucidated by liquid chromatography/high-resolution multiple-stage mass spectrometry (LC/HR-MSn) coupling. The potential toxicities of these isomers were estimated by in silico tests. Methods Aqueous solutions of fenbuconazole and grapes treated with this fungicide were irradiated in a self-made reactor equipped with a mercury vapor lamp. Analyses were carried out using high-performance liquid chromatography (HPLC) coupled with Fourier transform ion cyclotron resonance mass spectrometry (FT-ICRMS). High-resolution m/z measurements, multiple-stage mass spectrometry and isotopic labeling experiments allowed structural elucidation of the isomers of fenbuconazole. In silico toxicity estimations were carried out using the T.E.S.T. program. Results Seven isomers of fenbuconazole were detected after irradiation of the fungicide in aqueous solution; the major ones were also detected in the flesh of treated grapes irradiated under laboratory conditions. Elucidation of their chemical structures owing to high resolution measurements and multi-stage collision induced dissociation experiments allowed confirmation of photo-transformation pathways mainly dominated by cyclization processes. Photo-induced isomers exhibited higher potential toxicities than fenbuconazole for Daphnia magna and fathead minnow species. Conclusions UV-visible irradiation of fenbuconazole in aqueous solution and on grapes leads to the formation of isomers, all of which being potentially much more toxic than the parent fungicide. Copyright © 2015 John Wiley & Sons, Ltd.

International audience; This work aims to improve the computation of infrared spectra of gas-phase cations using DFT methods. Experimental IRMPD spectra for ten Zn and Ru organometallic complexes have been used to provide reference data for 64 vibrational modes in the 900-2000 cm-1 range. The accuracy of the IR vibrational frequencies predicted for these bands has been assessed over five DFT functionals and three basis sets. The functionals include the popular B3LYP and M06-2X hydrids and the range-separated hybrids (RSH) CAM-B3LYP, LC-BLYP and B97X-D. B3LYP gives the best mean absolute error (MAE) and root-mean-square error (RMSE) values of 7.1 and 9.6 cm-1 , whilst the best RSH functional, B97X-D, gives 12.8 and 16.6 cm-1 respectively. Using linear correlations instead of scaling factors improves the prediction accuracy significantly for all functionals. Experimental and computed spectra for a single complex can show significant differences even when the molecular structure is calculated correctly, and a means of defining confidence limits for any given computed structure is also provided.

International audience; UV-visible irradiation of thiophanate-methyl (TM) led to the formation of nine photoproducts that were characterized by high performance liquid chromatography coupled with high resolution Fourier transform ion cyclotron resonance mass spectrometry (FTICR-MS). Although carbendazime has been reported in the literature to be the major metabolite and photoproduct of thiophanate-methyl, it was not detected in this study. However, an isomer of carbendazime referred as PP2, which was unambiguously characterized owing to CID experiments, was found in great abundance. Grape berries and cherry tomatoes treated with aqueous solutions of thiophanate-methyl were submitted to irradiation under laboratory conditions. TM and PP2 were detected in both peel and flesh of berries. The ability of TM and PP2 to pass through the fruit skin has been shown to be highly compound and matrix dependent. In vitro bioassays on Vibrio fischeri bacteria showed that the global ecotoxicity of the TM solution increases significantly with the irradiation time. PP2 should likely contribute to this ecotoxicity enhancement since in silico estimations for Daphnia magna provide a LC50 value seven times lower for PP2 than for the parent molecule.

International audience; The UV-vis photodegradation of iprodione in water was investigated with a high pressure mercury lamp photoreactor. Five photoproducts of iprodione were characterized by LC-HR-MS/MS and isotopic labeling ; none of them has been reported in previous studies. Three of them result from the elimination of one or two chlorine atoms followed by hydroxy or hydrogen addition while the two others are cyclic isomers of iprodione. An ICR mass spectrometer was used for by-products identification; concentrations of photoproducts were estimated with a triple quadrupole instrument, using iprodione-D 5 as an internal standard. Phototransformation mechanisms were postulated to rationalize photoproducts formation. In silico QSAR toxicity predictions were conducted with the Toxicity Estimation Software Tool (T.E.S.T.) considering oral rat LD50, mutagenicity and developmental toxicity. Low oral rat LD50 values of 350 mg/kg and 759 mg/kg were predicted for cyclic isomers of iprodione, compared to that of the parent molecule (2776 mg/kg). Toxicity estimations exhibited that all the iprodione photoproducts could be mutagenic while the parent compound is not. In vitro assays on Vibrio fischeri were achieved on both irradiated and non-irradiated aqueous solutions of iprodione and on HPLC fractions containing isolated photoproducts. Phenolic photoproducts were shown to be mainly responsible for toxicity enhancement with EC50 values of 0.3 and 0.5 ppm, for the bi-and mono-phenolic compounds issued from chlorine elimination.

BACKGROUND: The aim of the work reported was to develop a procedure using 96-well microtiter plates for the easy determination of protonated groups of compounds including linear poly(amino acid)s and dendritic polymers divided into dendrigraft and dendrimeric structures. This study is a prerequisite step for the quantification of protonated groups in a macromolecule grafted onto a solid surface. RESULTS: The procedure was developed from the modified Bradford protein assay and incorporates several modifications that enable one to determine available amino groups (or even other cationic groups) present on the polyresidues backbone, all withinfiveminutes.BasedontheAthertonmathematicalmodel,weevaluatedthemaximalnumberofCoomassiebluebinding sites on linear, dendrigraft or even dendrimeric structures. CONCLUSION: The mean calculated percentage of occupied sites on a given macromolecule led us to demonstrate that one Coomassie blue molecule interacts with only one single protonated group. Consequently, the developed method using Coomassie blue binding can be used for the quantification of cationic groups in a macromolecule grafted onto a solid surface. c � 2009 Society of Chemical Industry