Search

Satellite laser ranging (SLR) is the space geodetic technique with the highest degree of range, measuring precision and distances right down to the millimeter level. Thanks to the improvement of SLR station layouts and the advance of SLR technology, in recent years, more research has been conducted to determine Global Navigation Satellite System (GNSS) satellite orbits using SLR data. The primary goal of this contribution is to investigate the accuracy of BeiDou Navigation-3 (BDS-3) Satellite precise orbit determination (POD) using solely SLR data, as well as explore the impact of various factors on that accuracy. Firstly, we used actual SLR data to make the POD for BDS-3 satellites, and the POD accuracy was positively connected with the orbital arc lengths. The 9-day median root mean square (RMS) in radial (R), along-track (T), and cross-track (N) directions were estimated at 4.7–8.2, 22.1–35.2, and 27.4–43.8 cm, respectively, for comparison with WUM precise orbits. Then, we explored the impact of SLR observations and stations on POD accuracy. For 9-day orbital arc lengths, five station or 20 observation arcs may offer an orbit with a 1 m precision. Six to eight stations or 30–35 observation arcs allow an improved orbit accuracy up to approximately 0.5 m. Furthermore, we examined how measurement errors and orbit modeling errors affect the SLR-only POD accuracy using simulated SLR data. For orbital arc lengths of 9 days, each cm of random error leads to a 9.3–11.0 cm decrease in orbit accuracy. The accuracy of an orbit is reduced by 10.1–15.0 cm for every 1 cm of systematic error. Moreover, for solar radiation pressure (SRP) errors, the effect of POD accuracy is 20.5–45.1 cm, respectively. [ABSTRACT FROM AUTHOR]

The satellite attitude error is transmitted to the gravity field through KBR antenna phase center correction and non-conservative force conversion, which affects the accuracy of gravity field inversion. Therefore, obtaining high-precision satellite attitude is one of the important research contents of gravity field inversion. Each satellite of GRACE-FO is equipped with three SCs and an IMU for satellite attitude measurement, and fusion of these two types of data can obtain high-precision satellite attitude. In this paper, we use kalman filter to fuse the original GRACE-FO 1A observation data, and take into account the calibration of the installation matrix of the SCs during the fusion process. Meanwhile, a quaternion integrator that takes angle increments as inputs is derived from the equivalent rotation vector differential equation to address the computational inefficiency of first-order quaternion integrator, the accuracy and computational efficiency are verified using measured data. The experimental results show that after the calibration of the installation matrix of the SCs, the system bias of 2 0 ′ ′ caused by switching from three SCs observations to two SCs observations can be eliminated. The standard deviation of the attitude difference between the obtained attitude in this paper and the attitude calculated by JPL is at most 6 ′ ′ and the proposed incremental quaternion integrator has the same accuracy as the first-order quaternion integrator but with computational efficiency improved by at least 35%. • Attitude determination is critical for gravity field inversion and Orbit determination. • The installation matrix calibration method is simple and effective. • The incremental quaternion integrator is high-precision and computationally efficient. [ABSTRACT FROM AUTHOR]