Search

Multiwavelength photo-magnetic imaging (PMI) is a novel combination of diffuse optics and magnetic resonance imaging, to the best of our knowledge, that yields tissue chromophore concentration maps with high resolution and quantitative accuracy. Here, we present the first experimental results, to the best of our knowledge, obtained using a spectrally constrained PMI image reconstruction method, where chromophore concentration maps are directly recovered, unlike the conventional two-step approach that requires an intermediate step of reconstructing wavelength-dependent absorption coefficient maps. The imposition of the prior spectral information into the PMI inverse problem improves the reconstructed image quality and allows recovery of highly quantitative concentration maps, which are crucial for effective cancer detection and characterization. The obtained results demonstrate the higher performance of the direct reconstruction method. Indeed, the reconstructed concentration maps are not only of higher quality but also obtained approximately 2 times faster than the conventional method.

Background and objectives In photothermal therapy, cancerous tissue is treated by the heat generated from absorbed light energy. For effective photothermal therapy, the parameters affecting the induced temperature should be determined before the treatment by modeling the increase in temperature via numerical simulations. However, accurate simulations can only be achieved when utilizing the accurate optical, thermal, and physiological properties of the treated tissue. Here, we propose a multi-wavelength photo-magnetic imaging (PMI) technique that provides quantitative and spatially resolved tissue optical absorption maps at any wavelength within the near-infrared (NIR) window to assist accurate photothermal therapy planning. Study design/materials and methods The study was conducted using our recently developed multi-wavelength PMI system, which operates at four laser wavelengths (760, 808, 860, and 980 nm). An agar tissue-simulating phantom containing water, lipid, and ink was illuminated using these wavelengths, and the slight internal laser-induced temperature rise was measured using magnetic resonance thermometry (MRT). The phantom optical absorption was recovered at the used wavelengths using our dedicated PMI image reconstruction algorithm. These absorption maps were then used to resolve the concentration of the tissue chromophores, and thus deduce its optical absorption spectrum in the NIR region based on the Beer-Lambert law. Results The optical absorption of the phantom was successfully recovered at the used four wavelengths with an average error of ~1.9%. The recovered absorption coefficient was then used to simulate temperature variations inside the phantom. A comparison between the modeled temperature maps and the MRT measured ones showed that these maps are in a good agreement with an average pseudo R2 statistic of 0.992. These absorption values were used to successfully recover the concentration of the used chromophores. Finally, these concentrations are used to accurately calculate the total absorption spectrum of the phantom in the NIR spectral window with an average error as low as ~2.3%. Conclusions Multi-wavelength PMI demonstrated a great ability to assess the distribution of tissue chromophores, thus providing its total absorption at any wavelength within the NIR spectral range. Therefore, applications of photothermal therapy applied at NIR wavelengths can benefit from the absorption spectrum recovered by PMI to determine important parameters such as laser power as well as the laser exposure time needed to attain a specific increase in temperature prior to treatment. Lasers Surg. Med. 00:00-00, 2020. © 2020 Wiley Periodicals LLC.

Photo-Magnetic Imaging (PMI) is a novel multimodality imaging technique that provides optical absorption maps with high-resolution and quantitative accuracy. Here, we present the preliminary experimental validation results obtained using our new multi-wavelength PMI system.

Although diffuse optical tomography (DOT) is able to obtain valuable functional information, its routine use in clinic is hampered by its poor spatial resolution and quantitative accuracy. Previously, our team introduced Photo-Magnetic Imaging (PMI) to overcome the limitation of DOT. PMI is a hybrid modality that synergistically utilizes optics and Magnetic Resonance Imaging (MRI). While illuminating the imaged medium by near-infrared laser, the induced internal temperature increase is measured using Magnetic Resonance Thermometry (MRT). Using these MRT maps, optical absorption maps at the laser's wavelength can be recovered using the dedicated PMI image reconstruction algorithm. In this paper, we present the result of the first validation simulation study of multi-wavelength PMI that utilizes five different laser wavelengths ranging between 760 and 980 nm. Using the high resolution wavelength specific absorption maps, PMI successfully recovered the concentration of three dyes, used as chromophore in the composition of our phantom, with high spatial resolution and quantitative accuracy. By providing functional information at high resolution, multi-wavelength PMI will be a valuable tool for monitoring tissue physiology, cancer detection and monitoring.

Photo-magnetic imaging (PMI) is an emerging optical imaging modality that showed great performance on providing absorption maps with high resolution and quantitative accuracy. As a multi-modality technology, PMI warms up the imaged object using a near infrared laser while temperature variation is measured using magnetic resonance imaging. By probing tissue at multiple wavelengths, concentration of the main tissue chromophores such as oxy-and deoxy-hemoglobin, lipid, and water are obtained then used to derive functional parameters such as total hemoglobin concentration and relative oxygen saturation. In this paper, we present a multi-wavelength PMI system that was custom-built to host five different laser wavelengths. After recovering the high-resolution absorption maps, a least-squared minimization process was used to resolve the different chromophore concentration. The performance of the system was experimentally tested on a phantom with two different dyes. Their concentrations were successfully assessed with high spatial resolution and average accuracy of nearly 80%. (C) 2020 Optical Society of America under the terms of the OSA Open Access Publishing Agreement

Photo-Magnetic Imaging (PMI) is a novel diffuse optical imaging technique that yields high resolution optical absorption images. It is based on the measurement of the temperature increase of a given medium after its illumination with a near-infrared laser using Magnetic Resonance Thermometry (MRT). In this paper, we present the first multi-wavelengths PMI system able to provide oxy- and deoxyhemoglobin concentration maps with high spatial and quantitative accuracy.

We recently introduced a new high-resolution diffuse optical imaging technique termed photo-magnetic imaging (PMI), which utilizes magnetic resonance thermometry (MRT) to monitor the 3D temperature distribution induced in a medium illuminated with a near-infrared light. The spatiotemporal temperature distribution due to light absorption can be accurately estimated using a combined photon propagation and heat diffusion model. High-resolution optical absorption images are then obtained by iteratively minimizing the error between the measured and modeled temperature distributions. We have previously demonstrated the feasibility of PMI with experimental studies using tissue simulating agarose phantoms. In this Letter, we present the preliminary ex vivo PMI results obtained with a chicken breast sample. Similarly to the results obtained on phantoms, the reconstructed images reveal that PMI can quantitatively resolve an inclusion with a 3 mm diameter embedded deep in a biological tissue sample with only 10% error. These encouraging results demonstrate the high performance of PMI in ex vivo biological tissue and its potential for in vivo imaging. (C) 2017 Optical Society of America.

In this study, we present a fast analytical approach for laser induced temperature increase in biological tissue. The whole problem consists of two main steps. These steps are the light propagation and heat transfer in tissue. We first obtain a detailed analytical solution for the diffusion equation based on an integral approach for specific boundary conditions. Secondly, we also solve the Pennes' bio-heat transfer equation analytically using the separation of variables technique and obtain the temperature induced by optical absorption of tissue. Here, heat source term consists of the local absorption and photon density, which will be determined from the diffusion equation. We find a very comprehensive solution for the diffusion equation by using an integral method for the Robin boundary condition. In other words, we obtain a particular Green's function in a different way. Next, we use this solution as a source term in the Pennes’ bio-heat equation by utilizing the heat convection boundary condition. It is important to note that these boundary conditions are good approximations for imaging of biological tissue. As a result, we obtain spatio-temporal temperature distribution inside the medium. First, our approach is validated by a numerical approach using a Finite Element Method (FEM). Next, we also validate our method by performing phantom and tissue experiments. Experimental data corresponding to spatio-temporal temperature distribution are recorded using magnetic resonance thermometry. The analytical results obtained by our method are in a very good agreement with ones obtained by the FEM and experiment.

A WDM–PON recycling incoming light to transmit upstream data has been analyzed. Effect of Rayleigh scattering, uneven energy distribution and noise accumulation are evaluated to achieve 80 km bidirectional communication with

In this work, we present a new analytical approach to model continuous wave laser induced temperature in highly homogeneous turbid media. First, the diffusion equation is used to model light transport and a comprehensive solution is derived analytically by obtaining a special Greens' function. Next, the time-dependent bio-heat equation is used to describe the induced heat increase and propagation within the medium. The bio-heat equation is solved analytically utilizing the separation of variables technique. Our theoretical model is successfully validated using numerical simulations and experimental studies with agarose phantoms and ex-vivo chicken breast samples. The encouraging results show that our method can be implemented as a simulation tool to determine important laser parameters that govern the magnitude of temperature rise within homogenous biological tissue or organs. (c) 2015 Optical Society of America

We introduce an entirely new technique, termed Photo-Magnetic Imaging (PMI), which overcomes the limitation of pure optical imaging and provides optical absorption at MRI spatial resolution. PMI uses laser light to heat the medium under investigation and employs MR thermometry for the determination of spatially resolved optical absorption in the probed medium. A FEM-based PMI forward solver has been developed by modeling photon migration and heat diffusion in tissue to compare simulation results with measured MRI maps. We have successfully performed PMI using 2.5 cm diameter agar phantom with two low optical absorption contrast (x 4) inclusions under the ANSI limit. Currently, we are developing the PMI inverse solver and undertaking further phantom and in vivo experiments.

In this paper, we present a novel imaging technique, namely Photo-Magnetic Imaging (PMI), which overcomes the limitation of pure optical imaging and provides optical contrast at MRI spatial resolution.

We present experimental results that validate our imaging technique termed photomagnetic imaging (PMI). PMI illuminates the medium under investigation with a near-infrared light and measures the induced temperature increase using magnetic resonance imaging. A multiphysics solver combining light and heat propagation is used to model spatiotemporal distribution of temperature increase. Furthermore, a dedicated PMI reconstruction algorithm has been developed to reveal high-resolution optical absorption maps from temperature measurements. Being able to perform measurements at any point within the medium, PMI overcomes the limitations of conventional diffuse optical imaging. We present experimental results obtained on agarose phantoms mimicking biological tissue with inclusions having either different sizes or absorption contrasts, located at various depths. The reconstructed images show that PMI can successfully resolve these inclusions with high resolution and recover their absorption coefficient with high-quantitative accuracy. Even a 1-mm inclusion located 6-mm deep is recovered successfully and its absorption coefficient is underestimated by only 32%. The improved PMI system presented here successfully operates under the maximum skin exposure limits defined by the American National Standards Institute, which opens up the exciting possibility of its future clinical use for diagnostic purposes.

Due to the strong scattering nature of biological tissue, optical imaging beyond the diffusion limit suffers from low spatial resolution. In this letter, we present an imaging technique, laser-induced photo-thermal magnetic imaging (PMI), which uses laser illumination to induce temperature increase in a medium and magnetic resonance imaging to map the spatially varying temperature, which is proportional to absorbed energy. This technique can provide high-resolution images of optical absorption and can potentially be used for small animal as well as breast cancer and lymph node imaging. First, we describe the theory of PMI, including the modeling of light propagation and heat transfer in tissue. We also present experimental data with corresponding predictions from theoretical models, which show excellent agreement.