Search

This work presents a high-resolution (13.2 GHz) channel-blocking optical filter, suitable for use as a reconfigurable optical add/drop multiplexer (ROADM), which seamlessly supports data rates from 2.5 to 160 Gb/s. The filter consists of a linear array of 64 MEMS micromirrors and a high-dispersion echelle grating. The demonstrated device had an insertion loss of 9 dB, a loss ripple of 1.2 dB, and a group delay ripple of 15 ps. Data transmission through the device with various mixed data rate scenarios ranging from 2.5 to 160 Gb/s showed negligible penalty, except at 40 Gb/s where a maximum penalty of 1.5 dB was observed due to a phase coherence with the blocker filter ripple. [ABSTRACT FROM PUBLISHER]

We introduce a general concept for the design of all-optical wavelength converters with pulse reformatting functionality. The novel wavelength converters are based on a single semiconductor optical amplifier followed by an optical filter. A microelectromechanical system-based realization is shown and simultaneous 40 Gb/s wavelength conversion, switching and signal format conversion is demonstrated. The new pulse reformatting optical filter device outperforms current schemes with respect to input-power requirements, input-power dynamic range and signal quality. [ABSTRACT FROM PUBLISHER]

A single-mode fiber connectorized microelectromechanical systems (MEMS) reflective optical switch attenuator operating in the 1550-nm wavelength region is described. The device consists of an electrostatically actuated gold-coated silicon vane interposed in a fiber gap yielding 0.81-dB minimum insertion loss in the transmit state and high transmission isolation in the reflection state with 2.15-dB minimum return loss. The switch attenuators also work as continuously variable optical attenuators capable of greater than 50-dB dynamic range and can be accurately regulated with a simple feedback control circuit. Switching voltages were in the range of 5-40 V and a switching time of 64 μs was achieved. The MEMS switch can be used in optical subsystems within a wavelength-division-multiplexed (WDM) optical network such as optical power regulators, crossconnects, and add/drop multiplexers. We used a discrete array of 16 switch attenuators to implement a reconfigurable 16-channel 100-GHz spacing WDM drop module of an add/drop multiplexer. Thru-channel extinction was greater than 40 dB and average insertion loss was 21 dB. Both drop-and-transmit of multiple channels (11-18-dB contrast, 14-19-dB insertion loss) and drop-and-detect of single channels (>20-dB adjacent channel rejection, 10-14-dB insertion loss) were demonstrated [ABSTRACT FROM PUBLISHER]