Search

This study experimentally and numerically validates the commonly employed technique of laser-induced heating of a material in optical temperature sensing studies. Furthermore, the Er3+-doped glass microspheres studied in this work can be employed as remote optical temperature sensors. Laser-induced self-heating is a useful technique commonly employed in optical temperature sensing research when two temperature-dependent parameters can be correlated, such as in fluorescence intensity ratio vs. interferometric calibration, allowing straightforward sensor characterization. A frequent assumption in such experiments is that thermal homogeneity within the sensor volume, that is, a sound hypothesis when dealing with small volume to surface area ratio devices such as microresonators, but has never been validated. In order to address this issue, we performed a series of experiments and simulations on a microsphere supporting whispering gallery mode resonances, laser heating it at ambient pressure and medium vacuum while tracking the resonance wavelength shift and comparing it to the shift rate observed in a thermal bath. The simulations were done starting only from the material properties of the bulk glass to simulate the physical phenomena of laser heating and resonance of the microsphere glass. Despite the simplicity of the model, both measurements and simulations are in good agreement with a highly homogeneous temperature within the resonator, thus validating the laser heating technique. [ABSTRACT FROM AUTHOR]

Featured Application: The investigated YAS glass microspheres doped with Nd3+ ions have great potential as remote optical temperature sensors. Moreover, they are suitable for the development of laser devices with low power thresholds. Yttria–alumina–silica (YAS) glass microspheres doped with Nd3+ ions were excited with a 532 nm continuous laser in order to study the dependency of the wavelength of the whispering gallery mode (WGM) peaks on the temperature of the sample. This was possible due to a previous calibration of the 808 nm and 890 nm emission bands of the Nd:YAS glass sample for different temperatures using the fluorescence intensity ratio (FIR) technique. A maximum sensitivity of 15 × 10−6 K−1 and a temperature resolution limit of 0.2 K were obtained for the microsphere sensor. Moreover, laser emission at 1064 nm was observed by continuous pumping at 532 nm, and a power threshold of 100 mW was determined. Upconversion emissions of Nd3+ were also studied by exciting the sample at 808 nm. [ABSTRACT FROM AUTHOR]