Search

This study investigates the reduction of optical losses in periodic/quasiperiodic structures made of porous Si-SiO2 through a dry oxidation process. Due to their unique optical properties, these structures hold great promise for various optoelectronic applications. By carefully engineering the composition and geometry of the structures, we fabricate periodic/quasiperiodic structures on a quartz substrate using an electrochemical anodization technique and subsequently subject them to dry oxidation at two different temperatures. The structure exhibits two localized modes in the transmission and reflection spectra. Unoxidized and oxidized structures' complex refractive index and filling factors are determined theoretically and experimentally. Optical characterization reveals that the porous Si-SiO2 structures exhibit lower absorption losses and improved transmission than the pure porous silicon structures. Additionally, scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS) confirm the presence of porous Si-SiO2 and reduced silicon content. Our study demonstrates that dry oxidation effectively decreases Rayleigh scattering losses, leading to enhanced optical performance and potential applications in efficient optoelectronic devices and systems based on silicon. For instance, periodic/quasiperiodic structures could soon be used as light-emitting devices inside the field of optoelectronics, adding photoluminescent nanoparticles to activate the localized modes. [ABSTRACT FROM AUTHOR]

Obtaining silicon-based photonic-structures in the ultraviolet range would expand the wavelength bandwidth of silicon technology, where it is normally forbidden. Herein, we fabricated porous silicon microcavities by electrochemical etching of alternating high and low refraction index layers; and were carefully subjected to two stages of dry oxidation at 350 °C for 30 minutes and 900 °C, with different oxidation times. In this way, we obtained oxidized porous silicon that induces a shift of a localized mode in the ultraviolet region. The presence of Si-O-Si bonds was made clear by FTIR absorbance spectra. High-quality oxidized microcavities were shown by SEM, where their mechanical stability was clearly visible. We used an effective medium model to predict the refractive index and optical properties of the microcavities. The model can use either two or three components (Si, SiO2, and air). The latter predicts that the microcavities are made almost completely of SiO2, implying less photon losses in the structure. The theoretical photonic-bandgap structure and localized photonic mode location showed that the experimental spectral peaks within the UV photonic bandgap are indeed localized modes. These results support that our oxidation process is very advantageous to obtain complex photonic structures in the UV region. [ABSTRACT FROM AUTHOR]

Optical tweezers is an example how to use light to generate a physical force. They have been used to levitate viruses, bacteria, cells, and sub cellular organisms. Nonetheless it would be beneficial to use such force to develop a new kind of applications. However the radiation pressure usually is small to think inmoving larger objects. Currently, there is some research investigating novel photonic working principles to generate a higher force. Here, we studied theoretically and experimentally the induction of electromagnetic forces in one-dimensional photonic crystals when light impinges on the off-axis direction. The photonic structure consists of a micro-cavity like structure formed of two one-dimensional photonic crystals made of free-standing porous silicon, separated by a variable air gap and the working wavelength is 633 nm. We show experimental evidence of this force when the photonic structure is capable of making auto-oscillations and forced-oscillations. We measured peak displacements and velocities ranging from2 up to 35 microns and 0.4 up to 2.1 mm/s with a power of 13 mW. Recent evidence showed that giant resonant light forces could induce average velocity values of 0.45 mm/s in microspheres embedded in water with 43 mW light power. [ABSTRACT FROM AUTHOR]