Search

Quaternary sputtered TiAlSiN coatings were investigated for their high temperature structural stability, surface morphology, mechanical behaviors, surface chemical bonding states, solar absorptance and thermal emittance for possible solar selective surface applications. The TiAlSiN films were synthesized, via unbalanced magnetron sputtered technology, on AISI M2 steel substrate and annealed at 500 °C - 800 °C temperature range. SEM micrographs show nanocomposite-like structure with amorphous grain boundaries. Nanoindentation analyses indicate a decrease of hardness, plastic deformation and constant yield strength for the coatings. XPS analysis show mixed Ti, Al and Si nitride and oxide as main coating components but at 800 °C the top layer of the coatings is clearly composed of only Ti and Al oxides. Synchrotron radiation XRD (SR-XRD) results indicate various Ti, Al and Si nitride and oxide phases, for the above annealing temperature range with a phase change occurring with the Fe component of the substrate. UV–Vis spectroscopy, FTIR spectroscopy studies determined a high solar selectivity, s of 24.6 for the sample annealed at 600 °C. Overall results show good structural and morphological stability of these coatings at temperatures up to 800 °C with a very good solar selectivity for real world applications. [ABSTRACT FROM AUTHOR]

Abstract: New cobalt-based metal oxide thin films (MxCoyOz with M=Mn, Cu, Ni) have been deposited on commercial aluminum and glass substrates using sol–gel dip-coating method. The as-deposited films were characterized by a wide range of complementary techniques including X-ray diffraction (XRD), scanning electron microscopy (SEM), atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS), spectrophotometry and nanoindentation techniques. A light absorption study for coatings on glass substrates within a wavelength range of 300–1100nm was also conducted. Topographical and morphological investigations showed the presence of nano-sized, grain-like particles in the copper–cobalt oxide coatings, which consequently had the roughest surface among the three coatings. All coatings on glass substrate exhibited higher absorption of ultraviolet (UV) light compared to visible light, while coatings on aluminum substrate generally had low reflectance (<50%) of UV light, moderate reflectance (<80%) of visible light and high reflectance (up to 100%) of infrared light. Implications of optical properties as a function of film thickness controlled by dip-heating cycles were discussed. The elastic modulus (E) and hardness (H) of thin film samples compared with stand‐alone commercial aluminum substrate were also measured. [Copyright &y& Elsevier]