Search

Porphyrin‐based non‐fullerene acceptors (NFAs) have shown pronounced potential for assembling low‐bandgap materials with near‐infrared (NIR) characteristics. Herein, panchromatic‐type porphyrin‐based molecules (POR1–POR5) are proposed by modulating end‐capped acceptors of a highly efficient porphyrin‐based NFA PORTFIC(POR) for organic solar cells (OSCs). Quantum chemical structure‐property relationship has been studied to discover photovoltaic and optoelectronic characteristics of POR1–POR5. Results show that optoelectronic properties of the POR1–POR5 are better in all aspects when compared with the reference POR. All proposed NFAs particularly POR5 proved to be the preferable porphyrin‐based NIR sensitive NFA for OSCs applications owing to lower energy gap (1.56 eV), transition energy (1.11 eV), binding energy (Eb=0.986 eV), electron mobility (λe=0.007013Eh), hole mobility (λh=0.004686 Eh), high λmax=1116.27 nm and open‐circuit voltage (Voc=1.96 V) values in contrast to the reference POR and other proposed NFAs. This quantum chemical insight provides sufficient evidence about excellent potential of the proposed porphyrin‐based NIR sensitive NFA derivatives for their use in OSCs. [ABSTRACT FROM AUTHOR]

Non-fullerene based organic compounds are considered promising materials for the fabrication of modern photovoltaic materials. Non-fullerene-based organic solar cells comprise of good photochemical and thermal stability along with longer device lifetimes as compared to fullerene-based compounds. Five new non-fullerene donor molecules were designed keeping in view the excellent donor properties of 3-bis(4-(2-ethylhexyl)-thiophen-2-yl)-5,7-bis(2ethylhexyl) benzo[1,2-:4,5-c′]-dithiophene-4,8-dione thiophene-alkoxy benzene-thiophene indenedione (BDD-IN) by end-capped modifications. Photovoltaic and electronic characteristics of studied molecules were determined by employing density functional theory (DFT) and time dependent density functional theory (TD-DFT). Subsequently, obtained results were compared with the reference molecule BDD-IN. The designed molecules presented lower energy difference (ΔΕ) in the range of 2.17–2.39 eV in comparison to BDD-IN (= 2.72 eV). Moreover, insight from the frontier molecular orbital (FMO) analysis disclosed that central acceptors are responsible for the charge transformation. The designed molecules were found with higher λmax values and lower transition energies than BDD-IN molecule due to stronger end-capped acceptors. Open circuit voltage (Voc) was observed in the higher range (1.54–1.78 V) in accordance with HOMOdonor–LUMOPC61BM by designed compounds when compared with BDD-IN (1.28 V). Similarly, lower reorganization energy values were exhibited by the designed compounds in the range of λe(0.00285–0.00370 Eh) and λh(0.00847–0.00802 Eh) than BDD-IN [λe(0.00700 Eh) and λh(0.00889 Eh)]. These measurements show that the designed compounds are promising candidates for incorporation into solar cell devices, which would benefit from better hole and electron mobility. [ABSTRACT FROM AUTHOR]

Considering the increased demand and potential of photovoltaic devices in clean, renewable electrical and hi-tech applications, non-fullerene acceptor (NFA) chromophores have gained significant attention. Herein, six novel NFA molecules IBRD1–IBRD6 have been designed by structural modification of the terminal moieties from experimentally synthesized A2-A1-D-A1-A2 architecture IBR for better integration in organic solar cells (OSCs). To exploit the electronic, photophysical and photovoltaic behavior, density functional theory/time dependent-density functional theory (DFT/TD-DFT) computations were performed at M06/6-311G(d,p) functional. The geometry, electrical and optical properties of the designed acceptor molecules were compared with reported IBR architecture. Interestingly, a reduction in bandgap (2.528–2.126 eV), with a broader absorption spectrum, was studied in IBR derivatives (2.734 eV). Additionally, frontier molecular orbital findings revealed an excellent transfer of charge from donor to terminal acceptors and the central indenoindene-core was considered responsible for the charge transfer. Among all the chromophores, IBRD3 manifested the lowest energy gap (2.126 eV) with higher λmax at 734 and 745 nm in gaseous phase and solvent (chloroform), respectively due to the strong electron-withdrawing effect of five end-capped cyano groups present on the terminal acceptor. The transition density matrix map revealed an excellent charge transfer from donor to terminal acceptors. Further, to investigate the charge transfer and open-circuit voltage (Voc), PBDBT donor polymer was blended with acceptor chromophores, and a significant Voc (0.696–1.854 V) was observed. Intriguingly, all compounds exhibited lower reorganization and binding energy with a higher exciton dissociation in an excited state. This investigation indicates that these designed chromophores can serve as excellent electron acceptor molecules in organic solar cells (OSCs) that make them attractive candidates for the development of scalable and inexpensive optoelectronic devices. [ABSTRACT FROM AUTHOR]

The global need for renewable sources of energy has compelled researchers to explore new sources and improve the efficiency of the existing technologies. Solar energy is considered to be one of the best options to resolve climate and energy crises because of its long-term stability and pollution free energy production. Herein, we have synthesized a small acceptor compound (TPDR) and have utilized for rational designing of non-fullerene chromophores (TPD1–TPD6) using end-capped manipulation in A2–A1–D–A1–A2 configuration. The quantum chemical study (DFT/TD-DFT) was used to characterize the effect of end group redistribution through frontier molecular orbital (FMO), optical absorption, reorganization energy, open circuit voltage (Voc), photovoltaic properties and intermolecular charge transfer for the designed compounds. FMO data exhibited that TPD5 had the least ΔE (1.71 eV) with highest maximum absorption (λmax) among all compounds due to the four cyano groups as the end-capped acceptor moieties. The reorganization energies of TPD1–TPD6 hinted at credible electron transportation due to the lower values of λe than λh. Furthermore, open circuit voltage (Voc) values showed similar amplitude for all compounds including parent chromophore, except TPD4 and TPD5 compounds. These designed compounds with unique end group acceptors have the potential to be used as novel fabrication materials for energy devices. [ABSTRACT FROM AUTHOR]

Fullerene-free organic chromophores have drawn considerable attention as successful photonic devices for organic solar cells. So, a series of novel non-fullerene-based donor molecules (HBTD2–HBTD9) were fabricated via structural modification of the terminal acceptor groups from HBTR1. In order to achieve the photovoltaic, photophysical, and electronic behavior of fore-said compounds, density functional theory/time-dependent density functional theory (DFT/TD-DFT) based analyses were accomplished at B3LYP functional along with 6-311G(d,p) basis set. The optical and electrical characteristics of the derivatives were compared with HBTR1 architecture. All designed molecules exhibited a lower E HOMO - E LUMO band gap (2.183–4.106 eV) with a red shift in absorbance compared to the reference compound (4.179 eV). All derivatives (HBTD2–HBTD9), except HBTD3 , showed a greater exciton dissociation rate due to low binding energy (E b = −0.337 to 1.400 eV) when compared with HBTR1 (E b = 1.401 eV). Interestingly, HBTD9 manifested to be the prime candidate for non-fullerene organic solar cells (NF–OSCs) owing to the lowest energy band gap, large mobility of charges, and least value of binding energy while holding an excellent redshift value compared to all the designed chromophores. This study revealed that these chromophores would be potential competitors in manufacturing effective optoelectronic materials. • Designing of acridine based donor materials (HBTD2 - HBTD9) from HBTR1 via efficient acceptors. • Study of photovoltaic properties of aforesaid compounds through DFT. • Investigation of opto-electronic properties at B3LYP/6-311G(d,p) functional of DFT. • Efficacy of designed compounds was explored by investigating open circuit voltage. [ABSTRACT FROM AUTHOR]