Search

Triazole linkages (TLs) are mimics of the phosphodiester bond in oligonucleotides with applications in synthetic biology and biotechnology. Here we report the RuAAC-catalyzed synthesis of a novel 1,5-disubstituted triazole (TL2) dinucleoside phosphoramidite as well as its incorporation into oligonucleotides and compare its DNA polymerase replication competency with other TL analogues. We demonstrate that TL2 has superior replication kinetics to these analogues and is accurately replicated by polymerases. Derived structure-biocompatibility relationships show that linker length and the orientation of a hydrogen bond acceptor are critical and provide further guidance for the rational design of artificial biocompatible nucleic acid backbones.

We demonstrate the fabrication of a new DNA sensor that is based on the optical interactions occurring between oligonucleotide-coated NaYF4:Yb3+;Er3+ upconversion nanoparticles and the two-dimensional dichalcogenide materials, MoS2 and WS2. Monodisperse upconversion nanoparticles were functionalized with single-stranded DNA endowing the nanoparticles with the ability to interact with the surface of the two-dimensional materials via van der Waals interactions leading to subsequent quenching of the upconversion fluorescence. By contrast, in the presence of a complementary oligonucleotide target and the formation of double-stranded DNA, the upconversion nanoparticles could not interact with MoS2 and WS2, thus retaining their inherent fluorescence properties. Utilizing this sensor we were able to detect target oligonucleotides with high sensitivity and specificity whilst reaching a concentration detection limit as low as 5 mol·L−1, within minutes.

In the field of nucleic acid therapy there is major interest in the development of libraries of DNA-reactive small molecules which are tethered to vectors that recognize and bind specific genes. This approach mimics enzymatic gene editors, such as ZFNs, TALENs and CRISPR-Cas, but overcomes the limitations imposed by the delivery of a large protein endonuclease which is required for DNA cleavage. Here, we introduce a chemistry-based DNA-cleavage system comprising an artificial metallo-nuclease (AMN) that oxidatively cuts DNA, and a triplex-forming oligonucleotide (TFO) that sequence-specifically recognises duplex DNA. The AMN-TFO hybrids coordinate CuII ions to form chimeric catalytic complexes that are programmable – based on the TFO sequence employed – to bind and cut specific DNA sequences. Use of the alkyne-azide cycloaddition click reaction allows scalable and high-throughput generation of hybrid libraries that can be tuned for specific reactivity and gene-of-interest knockout. As a first approach, we demonstrate targeted cleavage of purine-rich sequences, optimisation of the hybrid system to enhance stability, and discrimination between target and off-target sequences. Our results highlight the potential of this approach where the cutting unit, which mimics the endonuclease cleavage machinery, is directly bound to a TFO guide by click chemistry.

Joining oligonucleotides together (ligation) is a powerful means of retrieving information from the nanoscale. To recover this information, the linkages created must be compatible with polymerases. However, enzymatic ligation is restrictive and current chemical ligation methods lack flexibility. Herein, a versatile ligation platform based on the formation of urea and squaramide artificial backbones from minimally modified 3′‐ and 5′‐amino oligonucleotides is described. One‐pot ligation gives a urea linkage with excellent read‐through speed, or a squaramide linkage that is read‐through under selective conditions. The squaramide linkage can be broken and reformed on demand, while stable pre‐activated precursor oligonucleotides expand the scope of the ligation reaction to reagent‐free, mild conditions. The utility of our system is demonstrated by replacing the enzymatically biased RNA‐to‐DNA reverse transcription step of RT‐qPCR with a rapid nucleic‐acid‐template‐dependent DNA chemical ligation system, that allows direct RNA detection., 3′‐ and 5′‐amino oligonucleotides are chemically ligated through the formation of urea and squaramide artificial backbones. The squaramide linkage can be formed in mild reagent‐free buffered conditions, read‐through accurately by specific polymerases, and even cleaved and reformed on demand. To demonstrate its utility, the RNA‐to‐DNA reverse transcription step of RT‐qPCR is replaced with squaramide chemical ligation for direct RNA detection.

The modification of DNA or RNA backbones is an emerging technology for therapeutic oligonucleotides, synthetic biology and biotechnology. Despite a plethora of reported artificial backbones, their vast potential is not fully utilised. Limited synthetic accessibility remains a major bottleneck for the wider application of backbone-modified oligonucleotides. Thus, a variety of readily accessible artificial backbones and robust methods for their introduction into oligonucleotides are urgently needed to utilise their full potential in therapeutics, synthetic biology and biotechnology.

The fluorescent adenine analogue qAN4 was recently shown to possess promising photophysical properties, including a high brightness as a monomer. Here we report the synthesis of the phosphoramidite of qAN4 and its successful incorporation into DNA oligonucleotides using standard solid-phase synthesis. Circular dichroism and thermal melting studies indicate that the qAN4-modification has a stabilizing effect on the B-form of DNA. Moreover, qAN4 base-pairs selectively with thymine with mismatch penalties similar to those of mismatches of adenine. The low energy absorption band of qAN4 inside DNA has its peak around 358 nm and the emission in duplex DNA is partly quenched and blue-shifted (ca. 410 nm), compared to the monomeric form. The spectral properties of the fluorophore also show sensitivity to pH; a property that may find biological applications. Quantum yields in single-stranded DNA range from 1-29 % and in duplex DNA from 1-7 %. In combination with the absorptive properties, this gives an average brightness inside duplex DNA of 275 M-1 cm-1 , more than five times higher than the most used environment-sensitive fluorescent base analogue, 2-aminopurine. Finally, we show that qAN4 can be used to advantage as a donor for interbase FRET applications in combination with adenine analogue qAnitro as an acceptor.

Click chemistry is an immensely powerful technique for the fast and efficient covalent conjugation of molecular entities. Its broad scope has positively impacted on multiple scientific disciplines, and its implementation within the nucleic acid field has enabled researchers to generate a wide variety of tools with application in biology, biochemistry, and biotechnology. Azide-alkyne cycloadditions (AAC) are still the leading technology among click reactions due to the facile modification and incorporation of azide and alkyne groups within biological scaffolds. Application of AAC chemistry to nucleic acids allows labeling, ligation, and cyclization of oligonucleotides efficiently and cost-effectively relative to previously used chemical and enzymatic techniques. In this review, we provide a guide to inexperienced and knowledgeable researchers approaching the field of click chemistry with nucleic acids. We discuss in detail the chemistry, the available modified-nucleosides, and applications of AAC reactions in nucleic acid chemistry and provide a critical view of the advantages, limitations, and open-questions within the field.

We report fluorogenic duplex-stabilising thiazole orange (TO) functionalised oligonucleotides for nucleic acid detection in which TO is attached to the nucleobase or sugar of thymidine., We have synthesised a range of thiazole orange (TO) functionalised oligonucleotides for nucleic acid detection in which TO is attached to the nucleobase or sugar of thymidine. The properties of duplexes between TO-probes and their DNA and RNA targets strongly depend on the length of the linker between TO and the oligonucleotide, the position of attachment of TO to the nucleotide (major or minor groove) and the mode of attachment of thiazole orange (via benzothiazole or quinoline moiety). This information can be used to design probes for detection of target nucleic acids by fluorescence or duplex melting. With cellular imaging in mind we show that 2′-OMe RNA probes with TO at the 5-position of uracil or the 2′-position of the ribose sugar are particularly effective, exhibiting up to 44-fold fluorescence enhancement against DNA and RNA, and high duplex stability. Excellent mismatch discrimination is achieved when the mispaired base is located adjacent to the TO-modified nucleotide rather than opposite to it. The simple design, ease of synthesis and favourable properties of these TO probes suggest applications in fluorescent imaging of DNA and RNA in a cellular context.

Antisense oligonucleotides are now entering the clinic for hard-to-treat diseases. New chemical modifications are urgently required to enhance their drug-like properties. We combine amide coupling with standard oligonucleotide synthesis to assemble backbone chimera gapmers that trigger an efficient RNase H response while improving serum life time and cellular uptake.

Chromosome conformation capture (3C) provides an adaptable tool for studying diverse biological questions. Current 3C methods provide either low-resolution interaction profiles across the entire genome, or high-resolution interaction profiles at up to several hundred loci. All 3C methods are affected to varying degrees by inefficiency, bias and noise. As such, generation of reproducible high-resolution interaction profiles has not been achieved at scale. To overcome this barrier, we systematically tested and improved upon current methods. We show that isolation of 3C libraries from intact nuclei, as well as shortening and titration of enrichment oligonucleotides used in high-resolution methods reduces noise and increases on-target sequencing. We combined these technical modifications into a new method Nuclear-Titrated (NuTi) Capture-C, which provides a >3-fold increase in informative sequencing content over current Capture-C protocols. Using NuTi Capture-C we target 8,061 promoters in triplicate, demonstrating that this method generates reproducible high-resolution genome-wide 3C interaction profiles at scale.

Three different chemical cyclisation reactions yield biocompatible cyclic oligonucleotide templates for use in RCA and DNA nanoflower formation., Cyclic oligonucleotides are valuable targets with a broad range of potential applications spanning molecular biology and nanotechnology. Of particular importance is their role as templates in the rolling circle amplification (RCA) reaction. We describe three different chemical cyclisation methods for the preparation of single-stranded cyclic DNA constructs. These chemical cyclisation reactions are cheaper to carry out than the enzymatic reaction, and more amenable to preparative scale purification and characterisation of the cyclic product. They can also be performed under denaturing conditions and are therefore particularly valuable for cyclic DNA templates that contain secondary structures. The resulting single-stranded cyclic DNA constructs contain a single non-canonical backbone linkage at the ligation point (triazole, amide or phosphoramidate). They were compared to unmodified cyclic DNA in rolling circle amplification reactions using φ-29 and Bst 2.0 DNA polymerase enzymes. The cyclic templates containing a phosphoramidate linkage were particularly well tolerated by φ-29 polymerase, consistently performing as well in RCA as the unmodified DNA controls. Moreover, these phosphoramidate-modified cyclic constructs can be readily produced in oligonucleotide synthesis facilities from commercially available precursors. Phosphoramidate ligation therefore holds promise as a practical, scalable method for the synthesis of fully biocompatible cyclic RCA templates. The triazole-modified cyclic templates generally gave lower and more variable yields of RCA products, a significant proportion of which were double-stranded, while the performances of the templates containing an amide linkage lie in between those of the phosphoramidate- and triazole-containing templates.

Funding: Engineering and Physical Sciences Research Council [EP/M019195/1]; Engineering and Physical Sciences Research Council Studentship (to J.S.H.); Biotechnology and Biological Sciences Research Council [BB/J001694/2, BB/R021848/1]; ADTBio; University of Kentucky and NCI Cancer Center Support Grant [P30 CA177558]; The Carmen L. Buck Endowment; Emerging Fields Initiative of the Friedrich-Alexander-University of Erlangen-Nuremberg [Grant title ‘Chemistry in Live Cells’]; Wellcome Trust [099149/Z/12/Z]; Royal Society, University Research Fellowship (to J.E.L.). Funding for open access charge: University of Oxford. The determination of distances between specific points in nucleic acids is essential to understanding their behaviour at the molecular level. The ability to measure distances of 2–10 nm is particularly important: deformations arising from protein binding commonly fall within this range, but the reliable measurement of such distances for a conformational ensemble remains a significant challenge. Using several techniques, we show that electron paramagnetic resonance (EPR) spectroscopy of oligonucleotides spin-labelled with triazole-appended nitroxides at the 2′ position offers a robust and minimally perturbing tool for obtaining such measurements. For two nitroxides, we present results from EPR spectroscopy, X-ray crystal structures of B-form spin-labelled DNA duplexes, molecular dynamics simulations and nuclear magnetic resonance spectroscopy. These four methods are mutually supportive, and pinpoint the locations of the spin labels on the duplexes. In doing so, this work establishes 2′-alkynyl nitroxide spin-labelling as a minimally perturbing method for probing DNA conformation. Publisher PDF

A systematic study of several new types of hybrids of Cu-chelated clamped phenanthroline artificial metallonuclease (AMN) with triplex-forming oligonucleotides (TFO) for sequence-specific cleavage of double-stranded DNA (dsDNA) is reported. The synthesis of these AMN-TFO hybrids is based on application of the alkyne-azide cycloaddition click reaction as the key step. The AMN was attached through different linkers at either the 5'- or 3'-ends or in the middle of the TFO stretch. The diverse hybrids efficiently formed triplexes with the target purine-rich sequence and their copper complexes were studied for their ability to cleave dsDNA in the presence of ascorbate as a reductant. In all cases, the influence of the nature and length of the AMN-TFO, time, conditions and amounts of ascorbate were studied, and optimum conjugates and a procedure that gave reasonably efficient (up to 34 %) cleavage of the target sequence, while rendering an off-target dsDNA intact, were found. The footprint of cleavage on PAGE was identified only in one case, with low conversion; this means that cleavage does not proceed with single nucleotide precision. On the other hand, these AMN-TFO hybrids are useful for the selective degradation of target dsDNA sequences. Future improvements to this design may provide higher resolution and selectivity.

We report the design and optimisation of novel oligonucleotide substrates for a sensitive fluorescence assay for high-throughput screening and functional studies of the DNA repair enzyme, XPF-ERCC1, with a view to accelerating inhibitor and drug discovery.

Antisense oligonucleotides (ASOs) are becoming important drugs for hard to treat diseases. Modifications to their DNA backbones are essential to inhibit degradation in vivo, but they can reduce binding affinity to RNA targets. To address this problem we have combined the enzymatic resistance of carbamate (CBM) DNA backbone analogues with the thermodynamic stability conferred by locked nucleic acid sugars (LNA). Using a dinucleotide phosphoramidite strategy and automated solid phase synthesis, we have synthesised a set of oligonucleotides modified with multiple LNA-CBM units. The LNA sugars restore binding affinity to RNA targets, and in this respect LNA position with respect to the CBM linkage is important. Oligonucleotides containing carbamate flanked on its 5'and 3'-sides by LNA form stable duplexes with RNA and unstable duplexes with DNA, which is desirable for antisense applications. Carbamate-LNA modified oligonucleotides also show increased stability in the presence of snake venom and foetal bovine serum compared to LNA or CBM backbones alone.

DNA-mediated self-assembly of nanoparticles has been of great interest because it enables access to nanoparticle superstructures that cannot be synthesized otherwise. However, the programmability of higher order nanoparticle structures can be easily lost under DNA denaturing conditions. Here, we demonstrate that light can be employed as an external stimulus to master the stability of nanoparticle superlattices (SLs) via the promotion of a reversible photoligation of DNA in SLs. The oligonucleotides attached to the nanoparticles are encoded to ligate using 365 nm light, effectively locking the SLs and rendering them stable under DNA denaturing conditions. The reversible process of unlocking these structures is possible by irradiation with light at 315 nm, recovering the structures to their natural state. Our work inspires an alternative research direction toward postassembly manipulation of nanoparticle superstructures using external stimuli as a tool to enrich the library of additional material forms and their application in different media and environments.

Molecular machines that assemble polymers in a programmed sequence are fundamental to life. They are also an achievable goal of nanotechnology. Here, we report synthetic molecular machinery made from DNA which controls and records the formation of covalent bonds. We show that an autonomous cascade of DNA hybridization reactions can create oligomers, from building blocks linked by olefin or peptide bonds, with a sequence defined by a reconfigurable molecular program. The system can also be programmed to achieve combinatorial assembly. The sequence of assembly reactions, and thus the structure, of each oligomer synthesized is recorded in a DNA molecule which enables this information to be recovered by PCR amplification followed by DNA sequencing.

Telomerase is expressed in the majority (>85%) of tumors, but has restricted expression in normal tissues. Long-term telomerase inhibition in malignant cells results in progressive telomere shortening and reduction in cell proliferation. Here we report the synthesis and characterization of radiolabeled oligonucleotides that target the RNA subunit of telomerase, hTR, simultaneously inhibiting enzymatic activity and delivering radiation intracellularly. Oligonucleotides complementary (Match) and noncomplementary (Scramble or Mismatch) to hTR were conjugated to diethylenetriaminepentaacetic dianhydride (DTPA), allowing radiolabeling with the Auger electron-emitting radionuclide indium-111 (111In). Match oligonucleotides inhibited telomerase activity with high potency, which was not observed with Scramble or Mismatch oligonucleotides. DTPA-conjugation and 111In-labeling did not change telomerase inhibition. In telomerase-positive cancer cells, unlabeled Match oligonucleotides had no effect on survival, however, 111In-labeled Match oligonucleotides significantly reduced clonogenic survival and upregulated the DNA damage marker γH2AX. Minimal radiotoxicity and DNA damage was observed in telomerase-negative cells exposed to 111In-Match oligonucleotides. Match oligonucleotides localized in close proximity to nuclear Cajal bodies in telomerase-positive cells. In comparison with Match oligonucleotides, 111In-Scramble or 111In-Mismatch oligonucleotides demonstrated reduced retention and negligible impact on cell survival. This study indicates the therapeutic activity of radiolabeled oligonucleotides that specifically target hTR through potent telomerase inhibition and DNA damage induction in telomerase-expressing cancer cells and paves the way for the development of novel oligonucleotide radiotherapeutics targeting telomerase-positive cancers. Significance: These findings present a novel radiolabeled oligonucleotide for targeting telomerase-positive cancer cells that exhibits dual activity by simultaneously inhibiting telomerase and promoting radiation-induced genomic DNA damage.

Phosphate groups are often crucial to biological activity and interactions of oligonucleotides, but confer poor membrane permeability. In addition, the group's lability to enzymatic hydrolysis is an obstacle to its use in therapeutics and in biological tools. We present the synthesis of N‐oxyamide and squaramide modifications at the 5’‐end of oligonucleotides as phosphate replacements and their biological evaluation using the 5’‐exonuclease SNM1A. The squaryl diamide modification showed minimal recognition as a 5’‐phosphate mimic; however, modest inhibition of SNM1A, postulated to occur through metal coordination at the active site, was observed. Their facile incorporation after solid‐phase synthesis and recognition by the exonuclease makes squaryl diamides attractive neutral 5’‐phosphate replacements for oligonucleotides. This work is the first example of squaryl diamide modifications at the 5’‐terminal position of oligonucleotides and of the potential use of modified oligonucleotides to bind to the metal center of SNM1A.

The chemical synthesis of oligonucleotides and their enzyme-mediated assembly into genes and genomes has significantly advanced multiple scientific disciplines. However, these approaches are not without their shortcomings; enzymatic amplification and ligation of oligonucleotides into genes and genomes makes automation challenging, and site-specific incorporation of epigenetic information and/or modified bases into large constructs is not feasible. Here we present a fully chemical one-pot method for the assembly of oligonucleotides into a gene by click-DNA ligation. We synthesize the 335 base-pair gene that encodes the green fluorescent protein iLOV from ten functionalized oligonucleotides that contain 5'-azide and 3'-alkyne units. The resulting click-linked iLOV gene contains eight triazoles at the sites of chemical ligation, and yet is fully biocompatible; it is replicated by DNA polymerases in vitro and encodes a functional iLOV protein in Escherichia coli. We demonstrate the power and potential of our one-pot gene-assembly method by preparing an epigenetically modified variant of the iLOV gene.

Templated chemical ligation of 5'-amino and 3'-phosphate oligonucleotides was used to synthesise a 762 base pair gene for green fluorescent protein. The phosphoramidate linkage can be read by DNA polymerase and transcribed to make RNA. We also show that phosphoramidate ligation and orthogonal CuAAC-mediated DNA ligation can be used simultaneously.

DNA strands containing a triazole linkage flanked on its 3′-side by an aminoethylphenoxazine nucleobase analogue (G-clamp) have been prepared by solid-phase synthesis followed by CuAAC-mediated click oligonucleotide ligation. The stability of the doubly modified DNA duplexes and DNA-RNA hybrids is greatly increased, whereas a single base pair mismatch located at or adjacent to the modifications is strongly destabilising, making triazole G-clamp a potent mismatch/point mutation sensor. A DNA strand containing this unnatural combination was successfully amplified by PCR to produce unmodified copies of the original template, with deoxyguanosine inserted opposite to the G-clamp-triazole nucleotide analogue. This study shows for the first time that a polymerase enzyme can read through a combined backbone/nucleobase modification surprisingly well. These favourable properties suggest new applications for oligonucleotides containing the G-clamp triazole modification in biotechnology, nanotechnology, diagnostics and therapeutics. © 2013 The Royal Society of Chemistry.

Mixed-sequence DNA molecules undergo mechanical overstretching by approximately 70% at 60–70 pN. Since its initial discovery 15 y ago, a debate has arisen as to whether the molecule adopts a new form [Cluzel P, et al. (1996) Science 271:792–794; Smith SB, Cui Y, Bustamante C (1996) Science 271:795–799], or simply denatures under tension [van Mameren J, et al. (2009) Proc Natl Acad Sci USA 106:18231–18236]. Here, we resolve this controversy by using optical tweezers to extend small 60–64 bp single DNA duplex molecules whose base content can be designed at will. We show that when AT content is high (70%), a force-induced denaturation of the DNA helix ensues at 62 pN that is accompanied by an extension of the molecule of approximately 70%. By contrast, GC-rich sequences (60% GC) are found to undergo a reversible overstretching transition into a distinct form that is characterized by a 51% extension and that remains base-paired. For the first time, results proving the existence of a stretched basepaired form of DNA can be presented. The extension observed in the reversible transition coincides with that produced on DNA by binding of bacterial RecA and human Rad51, pointing to its possible relevance in homologous recombination.

The advent of click chemistry has led to an influx of new ideas in the nucleic acids field. The copper catalysed alkyne-azide cycloaddition (CuAAC) reaction is the method of choice for DNA click chemistry due to its remarkable efficiency. It has been used to label oligonucleotides with fluorescent dyes, sugars, peptides and other reporter groups, to cyclise DNA, to synthesise DNA catenanes, to join oligonucleotides to PNA, and to produce analogues of DNA with modified nucleobases and backbones. In this critical review we describe some of the pioneering work that has been carried out in this area (78 references).

A two-step synthesis converting thymidine into a phosphotriester building block of 5′-azido-5′-deoxythymidine in 60% overall yield is presented. The building block was used to assemble an oligonucleotide with an azido group at its 5′-terminus, which underwent ligation–cycloaddition, producing a strand with PCR-compatible linkage in high yield.

Biochemical strategies that use a combination of synthetic oligonucleotides, thermostable DNA polymerases, and DNA ligases can produce large DNA constructs up to 1 megabase in length. Although these ambitious targets are feasible biochemically, comparable technologies for the chemical synthesis of long DNA strands lag far behind. The best available chemical approach is the solid-phase phosphoramidite method, which can be used to assemble DNA strands up to 150 bases in length. Beyond this point, deficiencies in the chemistry make it impossible to produce pure DNA. A possible alternative approach to the chemical synthesis of large DNA strands is to join together carefully purified synthetic oligonucleotides by chemical methods. Click ligation by the copper-catalyzed azide-alkyne (CuAAC) reaction could facilitate this process. In this Account, we describe the synthesis, characterization, and applications of oligonucleotides prepared by click ligation. The alkyne and azide oligonucleotide strands can be prepared by standard protocols, and the ligation reaction is compatible with a wide range of chemical modifications to DNA and RNA. We have employed click ligation to synthesize DNA constructs up to 300 bases in length and much longer sequences are feasible. When the resulting triazole linkage is placed in a PCR template, various DNA polymerases correctly copy the entire base sequence. We have also successfully demonstrated both in vitro transcription and rolling circle amplification through the modified linkage. This linkage has shown in vivo biocompatibility: an antibiotic resistance gene containing triazole linkages functions in E. coli . Using click ligation, we have synthesized hairpin ribozymes up to 100 nucleotides in length and a hammerhead ribozyme with the triazole linkage located at the substrate cleavage site. At the opposite end of the length scale, click-ligated, cyclic mini-DNA duplexes have been used as models to study base pairing. Cyclic duplexes have potential therapeutic applications. They have extremely high thermodynamic stability, have increased resistance to enzymatic degradation, and have been investigated as decoys for regulatory proteins. For potential nanotechnology applications, we have synthesized double stranded DNA catenanes by click ligation. Other researchers have studied covalently fixed multistranded DNA constructs including triplexes and quadruplexes.

5-Hydroxymethylcytosine has recently been characterized as the 'sixth base' in human DNA. To enable research on this DNA modification, we report an improved method for the synthesis of 5-hydroxymethyl-2'-deoxycytidine ((5-HOMe)dC) phosphoramidite for site-specific incorporation into oligonucleotides. To minimize manipulations we employed a temporary protecting group-free 2'-deoxyuridine to 2'-deoxycytidine conversion procedure that utilizes phase transfer catalysis. The desired (5-HOMe)dC phosphoramidite is obtained in six steps and 24% overall yield from 2'-deoxyuridine.

DNA strands containing an unnatural T-triazole-T linkage have been synthesized by click DNA ligation between oligonucleotides with 3'-AZT and 5'-propargylamido dT and amplified efficiently by polymerase chain reaction (PCR) using several different polymerases. DNA sequencing of PCR amplicons and clones in two different sequence contexts revealed the presence of a single thymidine at the ligation site. The remarkable ability of thermostable polymerases to reproducibly copy DNA templates containing such an unnatural backbone opens up intriguing possibilities in gene synthesis, genetic analysis, biology, and nanotechnology.

We present a new method to program the covalent binding of gold nanoparticles onto graphene oxide sheets. The binding selectivity is driven by the synergy of chemically modified oligonucleotides, grafted onto the surfaces of nanoparticles and graphene oxide. In the presence of a templating complementary DNA strand, nanoparticles are brought near the surface of the graphene oxide. Once in close proximity, the DNA strands are ligated to create a permanent link between the nanoparticles and graphene oxide, ensuring stability of the system even during DNA melting conditions. Due to the selectivity and specificity of DNA, a second layer of gold nanoparticles of different size can be grafted on the top of the first layer of particles. The simplicity of this new method allows for its universal applicability when the formation of highly programmable, covalently linked hybrid nanoparticle–graphene oxide structures is a necessity.

A triazole linkage is formed in RNA by untemplated strain-promoted or CuAAC chemical ligation of 3'-azide and 5'-cyclooctyne oligonucleotides under denaturing conditions. Reverse transcriptase reads through these artificial linkages with omission of one nucleotide. These surprising results have implications for RNA isolation, amplification, sequencing and a variety of biological applications.

Overstretching of DNA occurs at about 60-70 pN when a torsionally unconstrained double-stranded DNA molecule is stretched by its ends. During the transition, the contour length increases by up to 70% without complete strand dissociation. Three mechanisms are thought to be involved: force-induced melting into single-stranded DNA where either one or both strands carry the tension, or a B-to-S transition into a longer, still base-paired conformation. We stretch sequence-designed oligonucleotides in an effort to isolate the three processes, focusing on force-induced melting. By introducing site-specific inter-strand cross-links in one or both ends of a 64 bp AT-rich duplex we could repeatedly follow the two melting processes at 5 mM and 1 M monovalent salt. We find that when one end is sealed the AT-rich sequence undergoes peeling exhibiting hysteresis at low and high salt. When both ends are sealed the AT sequence instead undergoes internal melting. Thirdly, the peeling melting is studied in a composite oligonucleotide where the same AT-rich sequence is concatenated to a GC-rich sequence known to undergo a B-to-S transition rather than melting. The construct then first melts in the AT-rich part followed at higher forces by a B-to-S transition in the GC-part, indicating that DNA overstretching modes are additive.

(Chemical Equation Presented) What goes around... Cyclic mini-DNA duplexes, as shown in the scheme, have been synthesized in high yield on the multimicromole scale by using click chemistry. These B-like duplexes are very stable and bind to drugs, such as distamycin A and 7-aminoactinomycin D. Circular dichroism indicates that the bases are stacked, and UV melting and NMR spectroscopy showed that the interbase hydrogen bonds are very stable, even in a dimer. © 2008 Wiley-VCH Verlag GmbH and Co. KGaA.

Oligonucleotides have been ligated efficiently on solid-phase using CuAAC and SPAAC chemistry to produce up to 186-mer triazole linked DNA products. Multiple sequential ligation reactions can be carried out by using a masked azide approach. This work suggests a novel modular approach to the synthesis of large complex oligonucleotide analogues.

The biocompatibility of a triazole mimic of the DNA phosphodiester linkage in Escherichia coli has been evaluated. The requirement for selective pressure on the click-containing gene was probed via a plasmid containing click DNA backbone linkages in each strand of the gene encoding the fluorescent protein mCherry. The effect of proximity of the click linkers on their biocompatibility was also probed by placing two click DNA linkers 4-bp apart at the region encoding the fluorophore of the fluorescent protein. The resulting click-containing plasmid was found to encode mCherry in E. coli at a similar level to the canonical equivalent. The ability of the cellular machinery to read through click-linked DNA was further probed by using the above click-linked plasmid to express mCherry using an in vitro transcription/translation system, and found to also be similar to that from canonical DNA. The yield and fluorescence of recombinant mCherry expressed from the click-linked plasmid was also compared to that from the canonical equivalent, and found to be the same. The biocompatibility of click DNA ligation sites at close proximity in a non-essential gene demonstrated in E. coli suggests the possibility of using click DNA ligation for the enzyme-free assembly of chemically modified genes and genomes.

Two new dibenzocyclooctyne–thymidine monomers were incorporated into oligonucleotides and crosslinked to azide-labelled complementary strands across the DNA grooves. Equivalent reactions were successful using a (bicyclo[6.1.0]nonyne) alkyne. Oligonucleotides containing internal cyclooctyne and amino groups were simultaneously reacted with azides and NHS esters of different fluorescent dyes to produce functional genetic probes.

The copper-catalysed [3+2] alkyne azide cycloaddition reaction (the CuAAC reaction) is the classic example of ‘click’ chemistry, a relatively new concept that has been influential in many areas of science. It is used in the nucleic acid field for DNA cross-linking, oligonucleotide ligation and cyclisation, DNA and RNA labelling, attaching DNA to surfaces, producing modified nucleobases and backbones, synthesising ribozymes and monitoring nucleic acid biosynthesis. More recently a related click reaction, the ring strain-promoted azide–alkyne [3+2] cycloaddition (SPAAC) reaction has been used successfully in DNA strand ligation and labelling. This does not require copper catalysis, and therefore has many potential uses in vivo. In this review we discuss recent developments in nucleic acid click chemistry and their applications in biology, biotechnology and nanotechnology.

A triazole mimic of a DNA phosphodiester linkage has been produced by templated chemical ligation of oligonucleotides functionalized with 5′-azide and 3′-alkyne. The individual azide and alkyne oligonucleotides were synthesized by standard phosphoramidite methods and assembled using a straightforward ligation procedure. This highly efficient chemical equivalent of enzymatic DNA ligation has been used to assemble a 300-mer from three 100-mer oligonucleotides, demonstrating the total chemical synthesis of very long oligonucleotides. The base sequences of the DNA strands containing this artificial linkage were copied during PCR with high fidelity and a gene containing the triazole linker was functional in Escherichia coli .

An improved strategy for the synthesis of protected 5-hydroxymethyl-2′-deoxycytidine phosphoramidite (XI), useful for site-specific incorporation into oligonucleotides, is described.

Extremely fast and efficient Diels-Alder chemical ligation of furan and maleimide oligonucleotides has been carried out in aqueous buffer. It was possible to ligate three oligonucleotides simultaneously in a controlled manner with the aid of a complementary splint. The templated reactions proceeded within 1 min at room temperature whereas non-templated reactions were slow and incomplete. Rapid and clean methods of DNA ligation such as the one demonstrated here have potential uses in biology and nanotechnology.

The advent of click chemistry has led to an influx of new ideas in the nucleic acids field. The copper catalysed alkyne–azide cycloaddition (CuAAC) reaction is the method of choice for DNA click chemistry due to its remarkable efficiency. It has been used to label oligonucleotides with fluorescent dyes, sugars, peptides and other reporter groups, to cyclise DNA, to synthesise DNA catenanes, to join oligonucleotides to PNA, and to produce analogues of DNA with modified nucleobases and backbones. In this critical review we describe some of the pioneering work that has been carried out in this area (78 references).

We present the first nucleobase analog fluorescence resonance energy transfer (FRET)-pair. The pair consists of tC(O), 1,3-diaza-2-oxophenoxazine, as an energy donor and the newly developed tC(nitro), 7-nitro-1,3-diaza-2-oxophenothiazine, as an energy acceptor. The FRET-pair successfully monitors distances covering up to more than one turn of the DNA duplex. Importantly, we show that the rigid stacking of the two base analogs, and consequently excellent control of their exact positions and orientations, results in a high control of the orientation factor and hence very distinct FRET changes as the number of bases separating tC(O) and tC(nitro) is varied. A set of DNA strands containing the FRET-pair at wisely chosen locations will, thus, make it possible to accurately distinguish distance- from orientation-changes using FRET. In combination with the good nucleobase analog properties, this points toward detailed studies of the inherent dynamics of nucleic acid structures. Moreover, the placement of FRET-pair chromophores inside the base stack will be a great advantage in studies where other (biomacro)molecules interact with the nucleic acid. Lastly, our study gives possibly the first truly solid experimental support to the dependence of energy transfer efficiency on orientation of involved transition dipoles as predicted by the Forster theory.

The Cu(I)-catalyzed alkyne-azide cycloaddition (CuAAC) reaction has been used to synthesize cyclic mini-DNA duplexes. The reaction is carried out on 5'-alkyne-3'-azide-labeled hairpin loop oligonucleotides and proceeds in high yield under mild conditions in as little as 5 min. The resultant duplexes have very high thermal stability and their CD spectra are characteristic of normal B-DNA. Copyright 2008 by John Wiley and Sons, Inc.

A series of hairpin oligonucleotides bearing a 5′-alkyne and 3′-azide were cyclised using the CuAAC reaction to form cyclic decoys for targeting the DNA binding site of the TCF/LEF and GLI transcription factors. Incubation of a fluorescent hairpin oligomer and its cyclic analogue in fetal calf serum showed that the cyclic construct has significantly greater stability to enzymatic degradation. Cell uptake studies using HEK-293 cells with the fluorescent cyclic decoy in the presence of lipofectamine 2000 transfection agent indicated that this analogue is taken up by the cells and localizes to the cell nucleus. Localized fluorescence was observed in the nuclei of HEK-293 cells after only 1.5 h incubation which increased over a period of 4 h and persisted for 24 h. © 2008 Springer Science+Business Media, LLC.

Binuclear ruthenium complexes that bind DNA by threading intercalation have recently been found to exhibit an exceptional kinetic selectivity for long polymeric adenine-thymine (AT) DNA. A series of oligonucleotide hairpin duplexes containing a central tract of 6-44 alternating AT base pairs have here been used to investigate the nature of the recognition mechanism. We find that, above a threshold AT tract length corresponding to one helix turn of B-DNA, a dramatic increase in threading intercalation rate occurs. In contrast, such length dependence is not observed for rates of unthreading. Intercalation by any mechanism that depends on the open end of the hairpin was found not to be important in the series of oligonucleotides used, as verified by including in the study a hairpin duplex cyclized by a copper-catalyzed "click" reaction. Our observations are interpreted in terms of a conformational pre-equilibrium, determined by the length of the AT tract. We finally find that mismatches or loops in the oligonucleotide facilitate the threading process, of interest for the development of mismatch-recognizing probes.

The copper-catalyzed azide-alkyne cycloaddition reaction has been used for the template-mediated chemical ligation of two oligonucleotide strands, one with a 5'-alkyne and the other with a 3'-azide, to produce a DNA strand with an unnatural backbone at the ligation point. A template-free click-ligation reaction has been used for the intramolecular circularization of a single stranded oligonucleotide which was used as a template for the synthesis of a covalently closed DNA catenane.

We demonstrate a new method to program the ligation of single stranded DNA-modified gold nanoparticles using copper-free click chemistry. Gold nanoparticles functionalized with a discrete number of 3'-azide or 5'-alkyne modified oligonucleotides, can be brought together via a splint strand and covalently 'clicked', in a simple one-pot reaction. This new approach to the assembly of gold nanoparticles is inherently advantageous in comparison to the traditional enzymatic ligation. The chemical ligation is specific and takes place at room temperature by simply mixing the particles without the need for special enzymatic conditions. The yield of 'clicked' nanoparticles can be as high as 92%. The ease of the copper-free, 'click-ligation' method allows for its universal applicability and opens up new avenues in programmed nanoparticle organization.

Current gene synthesis methods are driven by enzymatic reactions. Here we report the one-pot synthesis of a chemically-ligated gene from 14 oligonucleotides. The chemical ligation benefits from the highly efficient click chemistry approach templated by DNA nanostructures, and produces modified DNA that is compatible with polymerase enzymes.

Multiple additions of thiazole orange forms TOTFO probes stable for dsDNA detection and also expands the triplex target range., The instability of DNA triplexes particularly at neutral pH and above severely limits their applications. Here, we demonstrate that the introduction of a thiazole orange (TO) intercalator onto a thymine nucleobase in triplex forming oligonucleotides (TFOs) resolves this problem. The stabilising effects are additive; multiple TO units produce nanomolar duplex binding and triplex stability can surpass that of the underlying duplex. In one example, a TFO containing three TO units increased the triplex melting temperature at pH 7 by a remarkable 50 °C relative to the unmodified triplex. Notably, TO intercalation promotes TFO binding to target sequences other than pure polypurine tracts by the use of 5-(1-propynyl)cytosine (pC) against C:G inversions. By overcoming the instability of triplexes across a broad range of pH and sequence contexts, these very simple ‘TOTFO’ probes could expand triplex applications into many areas including diagnostics and cell imaging.