Search

This article analyzes the state of the art of the methods and models used for the characterization of odor annoyance and it preliminary advances some proposals for the evaluation of the olfactory nuisance. The use of a sensorial technique, such as dynamic olfactometry, is proposed for the analysis of odor concentrations, odor emission rates, and odor dispersions. A simple model for the quantification of environmental odor nuisance, based on the use of FIDOL factors, that are, frequency, intensity, duration, hedonic tone, and location, is proposed., (© The Author 2016. Published by Oxford University Press. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.)

The aim of this study is related to the assessment of odour emissions from landfill surfaces. Up to now, there is not a widely accepted method to quantify odour emissions from this particular kind of source. Five different methods were developed and investigated. These methods can be considered as based on three distinct approaches, both experimental and computational. The first approach provides to use models for the estimation the landfill gas production, whereby the second and the third approach are based on direct measurement campaigns on the landfill surface: for the determination of the methane concentration or for the direct measurement of the odour concentration, respectively. The methods were then compared in terms of specific odour emission rates by referring to other literature data. Finally, dispersion modelling was applied in order to allow a further comparison of the resulting odour impacts with other olfactometric data from independent monitoring campaigns on the studied site. [ABSTRACT FROM AUTHOR]

This paper describes the approach adopted for the evaluation both of the odour impact and of the non-carcinogenic health effects relevant to odours in the city of Terni, Italy. The first part of the study focused on the quantification of emissions by means of dynamic olfactometry and chemical analyses. Dispersion modelling was then applied for the evaluation of citizens' exposure both to odours and to their non-carcinogenic toxicity. The results show that, on one hand, the odour impact is considerable, actually affecting almost the whole city of Terni. On the other hand, the toxic impact, expressed in terms of the Hazard Index (HI), is about three orders of magnitude lower than the level that is expected to bring adverse effects, over a lifetime exposure, for human health. [ABSTRACT FROM AUTHOR]

The EN 13725:2003, which standardizes the determination of odour concentration by dynamic olfactometry, fixes the limits for panel selection in terms of individual threshold towards a reference gas (n-butanol in nitrogen) and of standard deviation of the responses. Nonetheless, laboratories have some degrees of freedom in developing their own procedures for panel selection and evaluation. Most Italian olfactometric laboratories use a similar procedure for panel selection, based on the repeated analysis of samples of n-butanol at a concentration of 60 ppm. The first part of this study demonstrates that this procedure may originate a sort of "smartening" of the assessors, which means that they become able to guess the right answers in order to maintain their qualification as panel members, independently from their real olfactory perception. For this reason, the panel selection procedure has been revised with the aim of making it less repetitive, therefore preventing the possibility for panel members to be able to guess the best answers in order to comply with the selection criteria. The selection of new panel members and the screening of the active ones according to this revised procedure proved this new procedure to be more selective than the "standard" one. Finally, the results of the tests with n-butanol conducted after the introduction of the revised procedure for panel selection and regular verification showed an effective improvement of the laboratory measurement performances in terms of accuracy and precision. [ABSTRACT FROM AUTHOR]

The aim of this study is to describe the methods adopted for the design and the experimental validation of a wind tunnel, a sampling system suitable for the collection of gaseous samples on passive area sources, which allows to simulate wind action on the surface to be monitored. The first step of the work was the study of the air velocity profiles. The second step of the work consisted in the validation of the sampling system. For this purpose, the odour concentration of some air samples collected by means of the wind tunnel was measured by dynamic olfactometry. The results of the air velocity measurements show that the wind tunnel design features enabled the achievement of a uniform and homogeneous air flow through the hood. Moreover, the laboratory tests showed a very good correspondence between the odour concentration values measured at the wind tunnel outlet and the odour concentration values predicted by the application of a specific volatilization model, based on the Prandtl boundary layer theory. The agreement between experimental and theoretical trends demonstrate that the studied wind tunnel represents a suitable sampling system for the simulation of specific odour emission rates from liquid area sources without outward flow. [ABSTRACT FROM AUTHOR]