Search

Pectin extractable from okra (Abelmoschus esculentus L.) is known to have various food and non-food applications. The objective of this work was to investigate the effect of particle size of milled samples on okra pectin yield using two different extraction solvents. Phosphate buffer (PB) and citric acid solution (CAS) (at pH 6, temperature of 80°C and for 1 h) were used to extract pectin from 10 g of milled okra sample with varying particle sizes (0.5, 1 and 2 mm). Ethanol was added to the aqueous extract to precipitate the pectin. The crude pectin obtained was then freeze-dried and the % pectin yield was calculated. The average okra pectin yield when PB was used for extraction were 19.6±4.0%, 15.8±1.0% and 11.9±1.5% for 0.5 mm, 1 mm and 2 mm particle sizes, whereas that of the CAS counterparts were 32.7±8.1%, 25.6±0.8% and 35.6±5.5%, respectively. However, considering purity of the pectin extracts (PB > CAS), the present findings indicated that a higher pectin yield is achievable with 0.5 mm as the optimal particle size of okra pod powder using phosphate buffer as extraction solvent.

The pasting properties of starch are influenced by the starch-hydrocolloid interaction in the mixed system. In this study, the effect of pectin extract from three okra genotypes (Agbagoma, Asontem, and Sengavi) at concentrations of 0%, 5%, 10%, and 15% on the pasting properties of starch were investigated. The pasting properties of the mixed systems were determined using the Rapid Visco-Analyzer. The results showed that okra pectin decreased the peak viscosity and setback value of starch with the highest exhibited by Agbagoma and Asontem. The final viscosity of starch was increased in most samples except for 10–15% Agbagoma and 15% Asontem pectin systems. The peak time (3.84 − 6.84 min) increased with increasing okra pectin concentration. Pasting temperature for the mixed systems ranged from 51.24 oC (for 10% Sengavi) to 80.65°C (for 15% Agbagoma). Overall, okra pectin affected the pasting properties of starch and decreased starch retrogradation.

The objective of this study was to investigate the effect of okra pectin as a stabilizer and a texturizer on the quality and consumer acceptability of tigernut milk and fried yam, respectively. Okra pectin concentrations 0% (control), 0.2%, 0.4% and 0.6% were used in the preparation of tigernut milk as well as to pretreat yam slices before deep frying. The viscosity and microbial quality of the tigernut milk samples were evaluated, whilst the moisture content, oil uptake and colour of fried yam were also determined. Consumer acceptability test was conducted on both the tigernut milk and fried yam using 50 semi-trained panelists. The viscosity of the tigernut milk samples which ranged from 4.67 cP to 10.50 cP increased with increasing concentrations of okra pectin. The microbial load of all tigernut milk samples were within the acceptable limits. With the exception of sample appearance, okra pectin also had no significant effect (p > 0.05) on the sensory quality of tigernut milk. On the other hand, okra pectin treatment in the fried yam samples resulted in significantly different moisture (54.33–56.71%), oil uptake/fat content (4.00–5.50%) and colour (L*a*b*) values. Results showed that okra pectin had no significant effect (p > 0.05) on all sensory quality parameters of fried yam samples though 0.2% okra pectin treated yam had the highest mean overall acceptability. The findings suggest that treatment with okra pectin can be exploited to make appreciable impact on the quality and consumer acceptability of fried yam.