Search

This study investigated the application of materials peat-mineral mix (PT) and Pleistocene fluvial sands from different location (PF-1 and PF-2) obtained from surface mining of oil sands as sorbents of naphthenic acids (NAs) from oil sands process water (OSPW). To understand the sorption properties and mechanisms of NAs in the materials, sorption and desorption studies were performed using decanoic acid (DA) and 5-phenylvaleric acid (PVA). Additionally, the removal efficiency was evaluated using real OSPW to understand the effect of NA structure on sorption. Equilibrium of DA and PVA was reached at 2 days for PT, and 3 and 6 days for PF materials, respectively. Langmuir isotherm best fitted the equilibrium data. Maximum sorption capacities for DA and PVA were, respectively, 16.8 × 103 and 104 mg/kg for PT, 142.9 and 81.3 mg/kg for PF-1, and 600 and 476.2 mg/kg for PF-2. Hydrophobic interactions, hydrogen bonding, and π−π interaction were the main sorption mechanisms. Desorption of model compounds from post-sorption materials was not observed for 14 days. The removal of NAs from real OSPW ranged from 20 to 54%. PT is the most promising sorbent of NAs from OSPW because it partially removed NAs with a wide range of molecular weights and structures at very low dosage. Sorption of NAs was affected by the total organic carbon of the materials, emphasizing the hydrophobic interaction as an important sorption mechanism. The results suggest that some mobility of NAs is expected to take place if the reclamation materials come in contact with OSPW, which might occur in an oil sands reclamation landscape. [Display omitted] • Three materials were studied as sorbents of model NA compounds and NAs from OSPW. • Sorption mechanisms included hydrogen bonding, hydrophobic and π−π interactions. • No desorption of model NAs from materials was observed up to 14 days of contact time. • Removal of NAs with different molecular weights and structures ranged from 9.9 to 68.3%. • TOC was the main characteristic of materials that affected the sorption of NAs from OSPW. [ABSTRACT FROM AUTHOR]

[Display omitted] • ZnCl 2 -activated biochar from sludge successfully adsorbed total NAs in raw OSPW. • Pore filling, hydrogen bonding, and π − π interactions were the adsorption mechanisms. • Biochar had selectivity for NAs with hydrophobic and higher cyclicity characteristics. • Microtox® assay indicated 66% reduction in acute toxicity after biochar treatment. • 91% reduction of bioavailability of organics was observed in OSPW treated with sludge biochar. Large volumes of oil sands process water (OSPW) containing naphthenic acids (NAs) and other contaminants are generated by oil sands operations. For the first time, pristine and zinc chloride-activated biochars from sludge from a municipal wastewater treatment plant are studied in the adsorption of NAs in real OSPW. By using activated biochar instead of pristine biochar, the adsorption capacity (q t) for total NAs (classical and oxidized NAs) increased from 2.3 to 26.6 mg/g. The increase in q t for activated biochar was related to the improvement of surface area from 7.9 to 513 m2/g, the abundance of mesopores (89% of pore volume), and the oxygen-containing surface groups. Equilibrium was reached at 2 h of contact time. Considering the thousands of structures of NAs in the OSPW, the activated biochar presented higher affinity for NAs with higher carbon and double bond equivalency numbers, therefore, NAs with more hydrophobic and higher cyclicity characteristics. Pore-filling, hydrogen bonding, and π-π interactions are the adsorption mechanisms. Thermal regeneration of spent activated biochar was studied, and in the fifth cycle of regeneration, the regenerated biochar had q t of 7.1 mg/g, which was 5 times higher than the adsorption capacity of fresh pristine biochar. Adsorption treatment of OSPW using activated biochar decreased the following parameters: metals Mg (7%), Ca (21%), Sr (27%), and Ba (60%), organic matter by means of DOC (63%) and COD (66%), acute toxicity towards V. fischeri (66%) and bioavailability of organics (91%). These findings promote circular economy as it presents an efficient adsorbent for NAs in OSPW developed from sludge, reducing the environmental impact associated with sludge disposal and allowing the efficient reclamation and reuse of OSPW. [ABSTRACT FROM AUTHOR]

A novel photocatalyst, Bi 2 WO 6 /NiO/Ag, with hierarchical flower-like Z-scheme heterojunction, which exhibited excellent stability and photocatalytic activity over a wide light spectrum, was firstly synthesized and used in the remediation of real oil sands process water (OSPW) and achieved complete removal of aromatics, classical naphthenic acids (NAs), and heteroatomic NAs after 6 h of photocatalytic treatment. The acute toxicity of OSPW was completely eliminated after only 2 h of treatment. h+ and ∙OH were found to be the major oxidative species in the photocatalytic system. The enhanced photocatalytic efficiency is the result of the unique Z-scheme electron transfer among electron mediators Ag, NiO, and Bi 2 WO 6 , which was supported by the in-situ irradiated XPS. The study benefits the design of engineered passive treatment approach for OSPW remediation through solar light-driven catalyst. [Display omitted] • 3D flower-like Z scheme photocatalyst Bi 2 WO 6 /NiO/Ag was synthesized. • Bi 2 WO 6 /NiO/Ag effectively treated OSPW with 90% degradation of O 2 -NAs within 3 hrs. • Aromatics with three fused rings were more prone to degradation than single and two-ring aromatics. • NAs with different carbon number and DBE showed different degradation behaviors. • Z-scheme structure enhanced the photocatalytic activity and was verified by in-situ irradiated XPS. [ABSTRACT FROM AUTHOR]

• The photochemical reactions of ferric citrate were used to treat OSPW. • NAs could be effectively degraded by ferric citrate under visible light irradiation. • Photocatalytic activity of ferric citrate was greatly affected by the initial pH of OSPW. • Hydroxyl radical was the dominant reactive species in the process. • The photochemical reactions of ferric citrate could produce both Fe2+ and H 2 O 2 in situ. An environmental-friendly treatment method based on photochemical reactions of ferricarboxylate complexes was developed for the treatment of oil sands process water (OSPW). Without using H 2 O 2 , the classical naphthenic acids (NAs), one of the organic compounds present in OSPW, can be effectively degraded by ferric citrate under visible light irradiation. Photochemical reaction activity of ferric citrate was greatly affected by the initial pH of OSPW. In acidic conditions, ferric citrate exhibited an extremely high degradation ratio of classical NAs, 98.3% (initial pH 3) and 96.8% (initial pH 5). Once initial pH exceeded 5, the degradation ratio of classical NAs in OSPW decreased quickly, and the degradation ratio of classical NAs could reach 65.7% (initial pH 7) and 42.4% (without adjusting pH, initial pH 8.9), respectively. It was found that the structure of NAs had little impact on the removal efficiency of NAs. It was also confirmed through scavenger experiments and reaction mechanism study that hydroxyl radical was the dominant reactive species in the process. The study demonstrated that ferric citrate possesses excellent visible light absorption ability and the photochemical reactions of ferric citrate can produce both Fe2+ and H 2 O 2 in situ , Fenton reagent, which non-selectively degrade NAs of OSPW. [ABSTRACT FROM AUTHOR]

Naphthenic acid fraction compounds (NAFCs), defined herein as the polar organic compounds extracted from the acidified oil sands process water (OSPW) samples using dichloromethane, are becoming the research hotspot due to their presence in large amount in OSPW and along with other potentially NA-contaminated water streams from the mining site. Fourier transform infrared spectroscopy (FTIR) method is commonly used to quantify NAFCs and assumes that the total NA concentration is measured as the sum of the responses for all carboxylic acid functional groups. In this study, the NAFCs in various OSPW and groundwater (GW) samples from an active oil sands mining site were analyzed using FTIR. All water samples were pretreated using either solid-phase extraction (SPE) or liquid-liquid extraction (LLE) methods before analysis. The results showed that SPE produced higher recoveries of NAFCs than LLE for most water samples under current experimental conditions. For the quantification of NAFCs, commercial Fluka NA mixture and a pre-calibrated OSPW extract were employed as the calibration standards. The NAFCs calibrated with Fluka NA mixture and OSPW extract had clear linear relationships. The concentrations of NAFCs obtained using OSPW extract standard curve were 2.5 times the NAFC concentrations obtained using the Fluka NA mixture standard curve. Additionally, good linear correlations were observed between the total NAs and O 2 -O 6 NA species determined by ultra-performance liquid chromatography coupled with time-of-flight mass spectrometry (UPLC-TOFMS) and the NAFCs measured by FTIR. According to these correlations, the NA compositions in NAFCs were developed, and the relative abundances of O 2 -O 6 NA species in NAFCs were similar for SPE and LLE pretreated samples. The findings of this study demonstrated that FTIR could be used as a promising tool to monitor total NA species and to estimate the NA profile in different environmental water samples. Unlabelled Image • We compared FTIR and UPLC-TOFMS with different extraction methods (LLE and SPE). • SPE produced higher recoveries of NAFCs than LLE for most water samples. • Higher NAFC concentrations were produced with OSPW extract than those with Fluka. • Good linear correlations were observed between UPLC-TOFMS and FTIR. • FTIR provided fast and accurate estimation of the NA species composition. [ABSTRACT FROM AUTHOR]

This paper reported the impact of UV/H 2 O 2 , UV/chlorine, and UV/persulfate advanced oxidation processes on the molecular transformations of dissolved organic matter (DOM), removal of naphthenic acids (NAs) and acute toxicity in oil sands process water (OSPW). The UV/persulfate process exhibited the highest removal (81.2% with 2 mM dose) towards classical NAs and highest reduction in acute toxicity to Vibrio fischeri among the three processes. The fraction of DOM such as CHOS class species decreased along with the increase of the oxidant doses in all processes. The increase in O/C ratio and lack of change in the H/C and double bond equivalence indicated that H-abstraction followed by the OH-addition was the main reaction pathway for all processes. This observation aligned with previous studies using model compounds and proved that OSPW DOM reacted similarly to model compounds. Sulfur containing organic matters were the most liable compounds in OSPW NOM, while UV/chlorine was the most effective process to oxidize nitrogen containing organic matters. Overall results revealed that the UV/persulfate process could be used as a promising technique for the removal of OSPW NA and reduction of acute toxicity towards Vibrio fischeri. In addition, this DOM characterization approach could be utilized to investigate the transformation of complicated OSPW DOM and to identify the byproducts generated during different water treatment processes. Unlabelled Image • UV/persulfate had the highest O 2 -NA removal. • UV/persulfate had the highest reduction in acute toxicity to Vibrio fischeri. • H-abstraction followed by OH-addition was the main reaction pathway for all processes. • Sulfur containing organic matters were the most liable compounds in OSPW NOM. • Chlorinated byproducts were formed in both UV/chlorine and UV/persulfate. [ABSTRACT FROM AUTHOR]