Search

Research on unmanned surface vessels (USVs) has evolved significantly in recent decades. In particular, intelligent navigation technology has progressed from theoretical concepts to practical applications. As USV research in ocean engineering advances, there is an increasing demand for enhanced performance in intelligent guidance strategy and path-following control systems. This manuscript proposes future development directions for USVs by providing an overview of relevant standards for the intelligence level of these vessels and describing the current status of USV engineering practices. Based on practical ocean engineering requirements, safety considerations, and energy efficiency demands, this paper summarizes the current research status, future research challenges, and potential solutions for USV intelligent guidance and path-following control algorithms from the perspective of large ship intelligence. This manuscript provides a valuable reference for academic researchers and practitioners aiming to identify and position future development directions.

In addressing the high costs, inefficiencies, and limitations of purely digital simulations in maritime trials for unmanned vessel path planning, this paper introduces a ship virtual path planning simulation test system. This system, unbound by temporal and spatial constraints, vividly showcases the navigational performance of vessels. After analyzing the virtual testing requirements for the autonomous navigation performance of unmanned surface vehicles (USVs), we established the overall framework of this system. Data-driven by a numerical simulation platform, the system achieves synchronized operation between physical and virtual platforms and supports interactive path planning simulations between USVs and the virtual testing system. Furthermore, to address the limitations of traditional ship trajectory planning evaluation, this paper develops a global path planning fitness evaluation function that comprehensively considers trajectory safety, navigation distance, and vessel stability, achieving optimal comprehensive routes through the particle swarm optimization algorithm. Test results indicate an average roll reduction of 14.31% in the planned routes, with a slight increase in navigation distance. By integrating two-dimensional curve simulation with three-dimensional visualization, this paper not only overcomes the limitations of purely physical and purely virtual simulations but also enhances the overall credibility and intuitiveness of the simulation. Experimental results validate the system’s effectiveness, providing a novel method for autonomous navigation testing and evaluation of USVs.

The study presents an optimized Unmanned Surface Vehicle (USV) collision avoidance decision-making strategy in restricted waters based on the improved Proximal Policy Optimization (PPO) algorithm. This approach effectively integrates the ship domain, the action area of restricted waters, and the International Regulations for Preventing Collisions at Sea (COLREGs), while constructing an autonomous decision-making system. A novel set of reward functions are devised to incentivize USVs to strictly adhere to COLREGs during autonomous decision-making. Also, to enhance convergence performance, this study incorporates the Gated Recurrent Unit (GRU), which is demonstrated to significantly improve algorithmic efficacy compared to both the Long Short-Term Memory (LSTM) network and traditional fully connected network structures. Finally, extensive testing in various constrained environments, such as narrow channels and complex waters with multiple ships, validates the effectiveness and reliability of the proposed strategy.

Unmanned surface vehicles (USVs) often operate in real-world environments with long voyage distances and complex routes. The use of a single-grid map model presents challenges, such as the high computational costs for high-resolution maps and loss of environmental information for low-resolution maps. This article proposes an environmental modeling method using a hybrid map that combines topology units and grids. The approach involves calibrating key nodes based on the watershed skeleton line, constructing a topology map using these nodes, decomposing the original map into unit maps, converting each unit map into a grid map, and creating a hybrid map environment model that comprises topology maps, unit map sets, and grid map sets. Then, the article introduces an improved genetic algorithm, called Genetic Algorithm with Feedback (FGA), to address path planning in hybrid maps. Experimental results demonstrate that FGA has better computational efficiency than other algorithms in similar experimental environments. In hybrid maps, path planning with FGA reduces the path lengths and time consumption, and the paths are more logical, smooth, and continuous. These findings contribute to enhancing the quality of path planning and the practical value of USVs.

Excellent self-righting performance is important to guarantee the normal navigation of Unmanned Surface Vehicles (USVs) after overturning, and the restoring time is an important index in design requirements. Traditionally, the static stability method and experiments on full-scale vehicles were used to analyze the large-angle stability of the USV. However, when it comes to the analysis of self-righting performance, the traditional static stability method will cause improper integration, and experiments are not convenient. To solve these problems, an improved static stability method was proposed, and a whole self-righting process simulation of a physical model was finished. The numerical simulation method was used to predict the self-righting process of a USV under four working conditions. Firstly, a midpoint average method based on the static stability theory was adopted to compute the static restoring time, and the results were compared with the results of the references, which verifies the effectiveness of the midpoint average method. Also, the midpoint average method is convenient because it only needs the restoring arm curve, the width and the gravity center height. Then, a numerical simulation of a physical model in static water was finished, and an experiment for a physical model in a towing tank was conducted. Comparing the restoring time of the midpoint average method, the numerical simulation and the experiment, the results show that the numerical simulation has high accuracy. Moreover, the numerical simulation was used to predict the self-righting process and analyze the self-righting performance of a USV under four working conditions.

The development of dynamic positioning (DP) algorithms for an unmanned surface vehicle (USV) is attracting great interest, especially in support of complex missions such as sea rescue. In order to improve the simplicity of the algorithm, a DP algorithm based on its own path following control ability is proposed. The algorithm divides the DP problem into two parts: path generation and path following. The key contribution is that the DP ability can be realized only by designing the path generation method, rather than a whole complex independent DP controller. This saves the computing power of the USV onboard computer and can effectively reduce the complexity of the algorithm. In addition, the fixed-time LOS guidance law is designed to improve the convergence rate of the system state in path-following control. The reasonable selection of speed and a heading controller ensures that the number of design parameters to be determined is at a low level. The above algorithms have been thoroughly evaluated and validated through extensive computer simulations, demonstrating their effectiveness in simulated and real marine environments. The simulation results verify the ability of the proposed algorithm to realize the dynamic positioning of USVs, and provide a practical scheme for the design of the dynamic positioning controller of USVs.

This paper proposes a fixed-time prescribed performance control technique to address the challenge of precise trajectory tracking control for unmanned surface vessels (USVs) in the presence of external time-varying disturbances and input saturation. To begin with, a fixed-time disturbance observer is created to handle the time-varying external interference. The observer can accurately estimate and compensate for the disturbance in a fixed time, which effectively improves the robustness of the system. Furthermore, to guarantee both the transient and steady-state response of the system, we employed a specific control technology that ensures the trajectory tracking error remains within a preset bounded range. Then, combined with the fixed-time disturbance observer, the command filter, the prescribed performance control technology, and the fixed-time stability theory, a fixed-time trajectory tracking control law is designed to make the trajectory tracking error of the system converge in a fixed time. Finally, an experiment was designed to validate the suggested control scheme. The results show that under the same conditions, compared with the nonlinear controller and the finite-time controller, the absolute error tracking index of this paper is the lowest, which means that the presented control scheme has higher accuracy.

Seamless integration of both terrestrial and non-terrestrial networks is crucial to providing full-dimensional wireless and ubiquitous coverage, particularly catering to those engaged in marine activities. Compared to terrestrial networks, wireless communications in the marine domain are still not satisfactory for ubiquitous connectivity. Featuring agile maneuverability and strong adaptive capability, autonomous marine vehicles (AMVs) play a pivotal role in enhancing communication coverage by relaying or collecting data. However, path planning for maritime data harvesting is one of the most critical issues to enhance transmission efficiency while ensuring safe sailing for AMVs; yet it has rarely been discussed under this context. This paper provides a comprehensive and holistic overview of path-planning techniques custom-tailored for the purpose of maritime data collection. Specifically, we commence with a general portrayal of fundamental models, including system architectures, problem formulations, objective functions, and associated constraints. Subsequently, we summarize the various algorithms, methodologies, platforms, tools, coding environments, and their practical implementations for addressing these models. Furthermore, we delve into the burgeoning applications of path planning in the realm of maritime data harvesting and illuminate potential avenues for upcoming research endeavors. We believe that future research may focus on developing techniques to adapt more intricate and uncertain scenarios, such as sensor failures, inaccurate state estimations, complete modeling of communication channels, ocean dynamics, and application of heterogeneous systems.

The development of intelligent task allocation and path planning algorithms for unmanned surface vehicles (USVs) is gaining significant interest, particularly in supporting complex ocean operations. This paper proposes an intelligent hybrid algorithm that combines task allocation and path planning to improve mission efficiency. The algorithm introduces a novel approach based on a self-attention mechanism (SAM) for intelligent task allocation. The key contribution lies in the integration of an adaptive distance field, created using the locking sweeping method (LSM), into the SAM. This integration enables the algorithm to determine the minimum practical sailing distance in obstacle-filled environments. The algorithm efficiently generates task execution sequences in cluttered maritime environments with numerous obstacles. By incorporating a safety parameter, the enhanced SAM algorithm adapts the dimensional influence of obstacles and generates paths that ensure the safety of the USV. The algorithms have been thoroughly evaluated and validated through extensive computer-based simulations, demonstrating their effectiveness in both simulated and practical maritime environments. The results of the simulations verify the algorithm’s capability to optimize task allocation and path planning, leading to improved performance in complex and obstacle-laden scenarios.

The control problem of avoidance-path-following is a critical consideration in the research of unmanned surface vehicle (USV) navigation control, and it holds great significance for the navigation safety of USVs. A guidance and control scheme based on finite-distance convergence is proposed in this paper. First, the requirements for the USV to avoid obstacles from the perspective of path-following lateral error are analyzed. Then, a new performance function with finite-distance convergence is proposed to constrain the lateral error. Based on this, a heading guidance law and a backstepping controller are designed to ensure that the lateral error converges to a steady-state value within the prescribed navigation distance and that the stability is maintained, satisfying the requirements of obstacle avoidance for the USV. In addition, an adaptive velocity command is designed to adjust the velocity with the lateral error, which, to a certain extent, avoids the saturation of the heading actuator caused by the large lateral error. Finally, it is proven through theory and simulation that the control algorithm can guide the USV to achieve avoidance-path-following within a limited distance and to avoid obstacles effectively.

A methodology of mathematical testing is proposed for a ship with twin azimuth thrusters based on numerical calculations. An unmanned surface vessel (USV) powered by two azimuth thrusters is considered, which is a model-scale configuration. The Ship Maneuvering Mathematical Model Group (MMG) model is introduced to describe forces on the hull and propellers. A set of captive tests (planar motion mechanism (PMM) and open-water tests) were simulated using STAR-CCM+ (16.06.008-R8) software to obtain hull hydrodynamic derivatives and azimuth thruster hydrodynamic coefficients. A maneuvering test of the model-scale ship with two azimuth thrusters is built based on numerical results, and numerical results are compared with the model-scale experimental data to validate the feasibility of numerical methods. The findings show that the usability of the developed mathematical test in predicting the maneuvering ability of ships with two azimuth thrusters is confirmed through numerical calculations.

The utilization of unmanned systems has witnessed a steady surge in popularity owing to its tremendous potential for a wide range of applications. In particular, the coordination among multiple vehicle systems has been demonstrated to possess unparalleled efficacy in accomplishing intricate and diverse tasks. In light of this, the present paper delves into the coordinated path planning mission that is accomplished by collaborative efforts amongst multiple Autonomous Underwater Vehicles (AUVs). First, considering the potential threats, arrival time windows, space, and physical constraints for the AUVs, a sophisticated coordinated path planning model is formulated in a 3D environment, serving as a systematic and structured blueprint for the underlying mechanism. Subsequently, the optimization problem is addressed through the incorporation of a restricted initialization scheme and a multi-objective clustering strategy in the proposed methodology. The resulting approach leads to the development of the Parallel Grey Wolf Optimizer (P-GWO) which exhibits strong global searching abilities and a rapid convergence rate, rendering it a dependable and effective solution. The results demonstrate a 10–15% improvement in convergence rate and a reduction of over 60% in the average cost value compared to reliable references, thus presenting an effective solution for underwater missions with specific requirements.

In order to ensure the safe navigation of USVs (unmanned surface vessels) and real-time collision avoidance, this study conducts global and local path planning for USVs in a variable dynamic environment, while local path planning is proposed under the consideration of USV motion characteristics and COLREGs (International Convention on Regulations for Collision Avoidance at Sea) requirements. First, the basis of collision avoidance decisions based on the dynamic window method is introduced. Second, the knowledge of local collision avoidance theory is used to study the local path planning of USV, and finally, simulation experiments are carried out in different situations and environments containing unknown obstacles. The local path planning experiments with unknown obstacles can prove that the local path planning algorithm proposed in this study has good results and can ensure that the USV makes collision avoidance decisions based on COLREGs when it meets with a ship.

Aiming at the problem that the path search rules in the traditional path planning methods are divorced from the actual maneuverability of an unmanned surface vehicle (USV), a motion planning method of state prediction rapidly exploring random tree (spRRT) is proposed. This method retains the discrete search of the original rules of RRT while adding the continuity of the motion of USV. Firstly, the state information for each movement (position, yaw angle, velocity, etc.), is calculated based on the mathematical model of USV’s motion which takes into account the complete dynamic constraints. Secondly, this information is added to the RRT path search rules to predict the state points that can be reached by the USV. Furthermore, in order to improve search efficiency and reduce cost, spRRT is enhanced by an elliptic sampling domain (spRRT-Informed). The simulation results indicate that spRRT can effectively plan smooth paths for smoothly navigating USV. The inclusion of the USV motion model has improved steering performance by an average of over 40%. Additionally, the spRRT-Informed enhanced with sampling optimization strategy improves performance by at least 10% over spRRT in terms of sailing time and distance of the path. The results of the simulation conducted in a realistic scenario validate that spRRT-Informed can be used as a reference for practical applications.

This paper proposes the study of a robust control scheme for an Unmanned Surface Vehicle (USV) in a urban waterway using Visual Odometry (VO) for position estimation of the vehicle instead of traditional sensors. For different applications, a USV is required to operate in autonomous navigation mode and under various disturbances inherent to its environment as currents and waves. To achieve efficient operation, a robust control scheme is required to cope with such disturbances. The autonomous navigation is achieved by using VO to estimate the vehicle’s position for denied Global Positioning Systems (GPS) environments. A robust control scheme based on Sliding Modes (SM) control theory is designed and its convergence is guaranteed by means of Lyapunov analysis. The tracking capabilities under disturbance conditions using VO for position estimation are verified in simulation using the virtual world tool from Matlab and Simulink.

Unmanned surface vessels (USVs) are required to perform motion prediction during a task. This is essential for USVs, especially when conducting motion control, and this work has been proven to be complicated. In this paper, an off-line black box modeling method for USV maneuvering, the Sparrow search algorithm-based weighted-least-squares support vector machine (SSA-WLS-SVM) was proposed to recognize the motion model of a USV. Firstly, the construction of the USV test platform and the processing process of the experimental data were introduced, the correctness of the MMG model was verified using a comparison of the test data and the simulation results, and then the MMG model was used to produce sample data later. To improve the stability and robustness of LS-SVM, weighted least squares and SSA were introduced to perform the optimization of the parameters of the algorithm and its kernel function. Then, the random maneuvering dataset was obtained using simulation on the MMG model, which was then preprocessed and used for training the black-box model. To verify the generalization ability of the identified model, the black-box model was used for comparison analysis between motion prediction with the proposed model and maneuvering test on the USV platform in a scenario different from the training data.

The observation path planning of an ocean mobile observation network is an important part of the ocean mobile observation system. With the aim of developing a traditional algorithm to solve the observation path of the mobile observation network, a complex objective function needs to be constructed, and an improved deep reinforcement learning algorithm is proposed. The improved deep reinforcement learning algorithm does not need to establish the objective function. The agent samples the marine environment information by exploring and receiving feedback from the environment. Focusing on the real-time dynamic variability of the marine environment, our experiment shows that adding bidirectional recurrency to the Deep Q-network allows the Q-network to better estimate the underlying system state. Compared with the results of existing algorithms, the improved deep reinforcement learning algorithm can effectively improve the sampling efficiency of the observation platform. To improve the prediction accuracy of the marine environment numerical prediction system, we conduct sampling path experiments on a single platform, double platform, and five platforms. The experimental results show that increasing the number of observation platforms can effectively improve the prediction accuracy of the numerical prediction system, but when the number of observation platforms exceeds 2, increasing the number of observation platforms will not improve the prediction accuracy, and there is a certain degree of decline. In addition, in the multi-platform experiment, the improved deep reinforcement learning algorithm is compared with the unimproved algorithm, and the results show that the proposed algorithm is better than the existing algorithm.

Trajectory planning aims to provide a time-related control target that contains the concerned states. For an underactuated surface vehicle (USV), planning challenges include limitations on curvature, speed, acceleration, and jerk. These challenges are relevant for the precise control of USVs. To solve these problems, an on-line double S method and multi-scale A* trajectory planning algorithm is proposed by integrating Reeds–Shepp curves (RSC), where a quad-tree-based graph is used for path planning and collision detection. Simulations illustrate that the proposed method has a better performance than the smooth rapid-exploration random tree (smooth-RRT) method and jump point search (JPS) method, and that path length and the state limitations are satisfied.

Path following and obstacle avoidances are used in heading control and path replanning for unmanned surface vessels (USVs), which have attracted the interest of many researchers over the years. This paper investigates the path-following and obstacle avoidance problems for USVs. First, on the basis of the current position and desired path, an adaptive line-of-sight (ALOS) algorithm is used to obtain the desired heading angle, and the sideslip angle compensation is considered. Then, to ensure that the USV follows the desired path. Model predictive control (MPC) is used to reduce the lateral error. The event-triggered mechanism (ETM) strategy is utilized to reduce the computational cost of MPC. Moreover, to obtain accurate state quantities in real time, a linear extended state observer (LESO) is used to counteract the effects of external disturbances and the nonlinear term of the model. Furthermore, an improved obstacle avoidance algorithm based on the geometric relationship is proposed. This method can better ensure USV navigation safety and reduce consumption and computation. Lastly, multiple simulation experiments illustrate that the algorithm improves the path-following capability and security and ensures smooth input changes by setting input constraints. Therefore, the designed controller has better feasibility and robustness.

A synchronous motion-based control strategy for unmanned aerial vehicle (UAV) landing on an unmanned surface vehicle (USV) is proposed to address the problem of low accuracy or even failure of UAV landing on the surface of a USV under wave action. Firstly, the landing marks are identified and localized based on computer vision; secondly, the USV attitude angle is predicted based on a bidirectional long-short term memory (Bi-LSTM) neural network to ensure that the UAV can respond to USV attitude changes in real-time; furthermore, the UAV attitude controller is designed based on a PID algorithm to realize UAV–USV synchronous motion. The experimental results demonstrate that the proposed UAV–USV synchronous motion landing scheme with high landing accuracy is more suitable for the UAV to achieve autonomous landing on a USV in a complex marine environment.

A new method is proposed for the dynamic obstacle avoidance problem of unmanned surface vehicles (USVs) under the international regulations for preventing collisions at sea (COLREGs), which applies the particle swarm optimization algorithm (PSO) to the dynamic window approach (DWA) to reduce the optimal trajectory finding the time and improve the timeliness of obstacle avoidance. Meanwhile, a fuzzy control algorithm is designed to dynamically adjust the weight coefficients of the velocity and obstacle distance terms in the cost function of the DWA algorithm to adapt to the changes in the environment. The proposed dynamic obstacle avoidance method is experimentally validated, in which proposed PSO combined with the DWA algorithm (PSO-CCDWA) results in a 42.1%, 11.2% and 28.0% reduction in the navigation time of the USVs in three encounter-situations of COLREGs than that of the classical DWA algorithm (CCDWA) conforming to the conventional COLREGs, respectively. The fuzzy control combined with the DWA algorithm (FUZZY-CCDWA) reduces the distance traveled by 15.8%, 0.9% and 2.8%, respectively, over the CCDWA algorithm in the three encounter scenarios. Finally, the effectiveness of the proposed dynamic obstacle avoidance method is further verified in a practical navigation experiment of a USV named “Buffalo”.

In order to avoid the influence of the test system itself on the autonomous navigation and performance test accuracy of unmanned surface vehicles (USVs), a test method for the obstacle-avoidance performance of USVs based on mobile-buoy–shore multisource-sensing-data fusion is proposed. In this method, a mobile-buoy-integrated test system is designed (that is, the test instrument is installed on the mobile buoy). The buoy is both the carrier of the test instrument and the obstacle. The software and hardware functions of the test system are realized in modules, and the obstacle-avoidance monitoring function of the USV is realized by the trajectory-tracking method of buoy perception preprocessing and shore adaptive weighted fusion. Then, on the basis of the mobile-buoy–shore sensing-data-fusion method, performance tests and a quantitative evaluation of the obstacle perception, static-obstacle avoidance, and dynamic-obstacle avoidance of the USV were carried out. The results show that: (1) the tested USV can accurately identify the distance between buoys; (2) the three static-obstacle-avoidance performance scores of the single obstacle, continuous obstacle, and inflection-point obstacle are 74.81, 77.14, and 47.61, respectively, and the quantitative evaluation score of the static-obstacle-avoidance comprehensive performance is 66.4; (3) the obstacle-avoidance-performance scores of overtaking, encounter, and cross encounter are about 53.92, 36.51, and 6.48, respectively, and the quantitative evaluation score of the comprehensive performance of the dynamic-obstacle avoidance is 72.36. The above quantitative evaluation results show that the system can: participate in track intervention and obstacle-avoidance monitoring as an obstacle; give the static- and dynamic-obstacle-avoidance quantitative evaluation results in a predetermined way, which verifies the feasibility and effectiveness of the obstacle-avoidance-performance test system of the USV on the basis of mobile-buoy–shore multisource-sensing fusion; and be used for the testing and evaluation of the obstacle-avoidance performance of USVs.

The motion stability of the Unmanned Surface Vessel (USV) is threatened by the action of waves under a rough sea state. In the present paper, the motion of a large-scale USV is numerically simulated under high sea state of level 5 and 7. The overset grid method and Reynolds Averaged Navier–Stokes (RANS) approach are employed to solve Navier–Stokes (N-S) equations. For the case of wave incident angle 0° and 30°, the heave, pitch and roll motion response of a large scale USV are investigated by using the six Degrees of Freedom (6-DOF) numerical model. The effects of different sea states, as well as different wave directions, on the motion of USV are compared. The comparative results indicate that the response of this USV in waves is the periodic free-motion according to the corresponding amplitude, which does not exceed the stable range, and there are no overturning and other situations that may affect the safety, in the case of level 5 and 7 sea states. The corresponding pressure at the bottom of this USV meets the range of material strength, and no structural damage or injury to the hull occurs, although the pressure varies at different wave periods. For the case of different wave directions, the analysis of the boundary layer thickness shows that the wave direction is of great importance to the boundary layer thickness distribution, both in the level 5 and level 7 sea states.

Intelligent unmanned surface vehicle (USV) collision avoidance is a complex inference problem based on current navigation status. This requires simultaneous processing of the input sequences and generation of the response sequences. The automatic identification system (AIS) encounter data mainly include the time-series data of two AIS sets, which exhibit a one-to-one mapping relation. Herein, an encoder–decoder automatic-response neural network is designed and implemented based on the sequence-to-sequence (Seq2Seq) structure to simultaneously process the two AIS encounter trajectory sequences. Furthermore, this model is combined with the bidirectional long short-term memory recurrent neural networks (Bi-LSTM RNN) to obtain a network framework for processing the time-series data to obtain ship-collision avoidance decisions based on big data. The encoder–decoder neural networks were trained based on the AIS data obtained in 2018 from Zhoushan Port to achieve ship collision avoidance decision-making learning. The results indicated that the encoder–decoder neural networks can be used to effectively formulate the sequence of the collision avoidance decision of the USV. Thus, this study significantly contributes to the increased efficiency and safety of maritime transportation. The proposed method can potentially be applied to the USV technology and intelligent collision-avoidance systems.

Augmenting the automation level of the inland waterway cargo transport sector, coupled with mechatronic innovation in this sector, could increase its competitiveness. This increase might potentially induce a sustainable paradigm shift in the road-dominated inland cargo transport sector. A key enabler of this envisaged shift may be an inland shore control centre (I-SCC) capable of remotely monitoring and controlling inland vessels. Accordingly, this study investigated the concept and design requirements to achieve an inland I-SCC that provides interaction services when supervising an unmanned surface vessel (USV). This I-SCC can help its operator to develop situational awareness and sensemaking. The conducted experiments offered insights into the performance of both the I-SCC system and its operator, and unlock research on the impact on ship sense and harmony when remotely controlling a USV. The Hull-To-Hull project extends the current I-SCC by providing enhanced motion control. This enhancement enables further performance insights and might improve the future monitoring of USVs. The successful I-SCC construction, the preliminary experiments, and the design-extension demonstrate that the I-SCC can serve as an experimental platform for both mechatronic innovation and human-automation integration research in the inland waterway sector, whilst additionally providing fruitful knowledge for adjacent research domains.

To improve the tracking stability control of unmanned surface vehicles (USVs), an intelligent control algorithm was proposed on the basis of an optimized radial basis function (RBF) neural network. The design process was as follows. First, the adaptation value and mutation probability were modified to improve the traditional optimization algorithm. Then, the improved genetic algorithms (GA) were used to optimize the network parameters online to improve their approximation performance. Additionally, the RBF neural network was used to approximate the function uncertainties of the USV motion system to eliminate the chattering caused by the uninterrupted switching of the sliding surface. Finally, an intelligent control law was introduced based on the sliding mode control with the Lyapunov stability theory. The simulation tests showed that the intelligent control algorithm can effectively guarantee the control accuracy of USVs. In addition, a comparative study with the sliding mode control algorithm based on an RBF network and fuzzy neural network showed that, under the same conditions, the stabilization time of the intelligent control system was 33.33% faster, the average overshoot was reduced by 20%, the control input was smoother, and less chattering occurred compared to the previous two attempts.

It is well known that path planning has always been an important study area for intelligent ships, especially for unmanned surface vehicles (USVs). Therefore, it is necessary to study the path-planning algorithm for USVs. As one of the basic algorithms for USV path planning, the rapidly-exploring random tree (RRT) is popular due to its simple structure, high speed and ease of modification. However, it also has some obvious drawbacks and problems. Designed to perfect defects of the basic RRT and improve the performance of USVs, an enhanced algorithm of path planning is proposed in this study, called the adaptive hybrid dynamic stepsize and target attractive force-RRT(AHDSTAF-RRT). The ability to pass through a narrow area and the forward speed in open areas of USVs are improved by adopting the AHDSTAF-RRT in comparison to the basic RRT algorithm. The improved algorithm is also applied to an actual gulf map for simulation experiments, and the experimental data is collected and organized. Simulation experiments show that the proposed AHDSTAF-RRT in this paper outperforms several existing RRT algorithms, both in terms of path length and calculating speed.