Search

This study focuses on the 3-D velocity structure and thickness of ∼7-Myr-old oceanic crust surrounding borehole 504B, located ∼235 km from the intermediate-spreading Costa Rica Rift (Panama Basin). It investigates how well seismic structure determined by 3-D tomography compares with actual lithology and, consequently, what the origin and cause might be of an amplitude anomaly, the 2A Event, that is observed in multichannel seismic data. Our P -wave model shows an ∼0.3-km-thick sediment layer of velocity between ∼1.6 and 1.9 km s−1 (gradient 1.0 s−1), bound at its base by a velocity step to 4.8 km s−1 at the top of oceanic crustal Layer 2. Layer 2 itself is subdivided into two main units (2A and 2B) by a vertical velocity gradient change at 4.5 km depth, with a gradient of 1.7 s−1 above (4.8–5.8 km s−1) and 0.7 s−1 below (5.8–6.5 km s−1). The base of Layer 2, in turn, is defined by a change in gradient at 5.6 km depth. Below this, Layer 3 has a velocity range of 6.5–7.5 km s−1 and a gradient of ∼0.3 s−1. Corresponding S -wave igneous layer velocities and gradients are: Layer 2A, 2.4–3.1 km s−1 and 1.0 s−1; Layer 2B, 3.1–3.7 km s−1 and 0.5 s−1; Layer 3, 3.7–4.0 km s−1 and 0.1 s−1. The 3-D tomographic models, coupled with gravity modelling, indicate that the crust is ∼6 km thick throughout the region, with a generally flat-lying Moho. Although the P - and S -wave models are smooth, their velocities and gradients are remarkably consistent with the main lithological layering subdivisions logged within 504B. Thus, using the change in velocity gradient as a proxy, Layer 2 is interpreted as ∼1.8 km thick and Layer 3 as ∼3.8 km thick, with little vertical variation throughout the 3-D volume. However, the strike of lateral gradient variation is not Costa Rica Rift-parallel, but instead follows the orientation of the present-day adjacent Ecuador Rift, suggesting a reorientation of the Costa Rica Rift spreading ridge axis. Having determined its consistency with lithological ground-truth, the resulting P -wave model is used as the basis of finite difference calculation of wave propagation to find the origin of the 2A Event. Our modelling shows that no distinct interface, or transition, is required to generate this event. Instead, it is caused by averaging of heterogeneous physical properties by the seismic wave as it propagates through Layer 2 and is scattered. Thus, we conclude that the 2A Event originates and propagates exclusively in the lower part of Layer 2A, above the mean depth to the top of the dykes of Layer 2B. From our synthetic data we conclude that using the 2A Event on seismic reflection profiles as a proxy to determine the Layer 2A/2B boundary's depth will result in an overestimate of up to several hundred metres, the degree of which being dependent on the specific velocity chosen for normal moveout correction prior to stacking. [ABSTRACT FROM AUTHOR]

In this study, multiple geophysical data types are used to investigate the structure and dynamics of the Ecuador Fracture Zone—a complex multistranded strike-slip fault system located in the Panama Basin. Gravity modelling reveals a 25–30-km-wide region of ∼3-km-thick, low-density crust beneath this system and an anomalously low-density region in the uppermost mantle. Along both edges, the transition to the 'normal' structure and thickness oceanic crust formed at both the Ecuador and Costa Rica Rifts is abrupt. Within the Ecuador Fracture Zone itself, normal faults bound the median ridges. These faults traverse the entire thickness of accumulated sediment and offset the seabed, while sediment layer geometries document multiple phases of relative uplift, with the most recent phase still ongoing. Active extensional faulting, with an approximately spreading ridge-parallel strike, is also observed in 6–7 Ma Costa Rica Rift crust. The median ridges and the transverse ridge at the eastern edge of the Ecuador Fracture Zone also have contrasting crustal density structures. Both median ridges have a lower density crust than between the intervening valleys, while the transverse ridge crust has an equivalent thickness and density structure to that formed at the Costa Rica Rift. The active median valley basement-cutting normal faults allow seawater ingress and alternation of the crustal footwall, and also flow to mantle depth where, based on gravity modelling, 30–50 per cent serpentinization of mantle peridotite occurs. The resulting serpentinite-driven buoyancy acts as the primary control on the observed median ridge relative vertical tectonism. In contrast, the relative uplift of the transverse ridge results from lithospheric flexure in response to a change in spreading direction between the Ecuador and Costa Rica Rifts. Contrary to the widely accepted assumption that fracture zones are tectonically inactive systems, the Ecuador Fracture Zone provides evidence of extension, serpentinization due to ongoing hydrothermal circulation and relative uplift. [ABSTRACT FROM AUTHOR]

The seismic velocity of the oceanic crust is a function of its physical properties that include its lithology, degree of alteration and porosity. Variations in these properties are particularly significant in young crust, but also occur with age as it evolves through hydrothermal circulation and is progressively covered with sediment. While such variation may be investigated through P -wave velocity alone, joint analysis with S -wave velocity allows the determination of Poisson's ratio, which provides a more robust insight into the nature of change in these properties. Here we describe the independent modelling of P - and S -wave seismic data sets, acquired along an ∼330-km-long profile traversing new to ∼8 Myr-old oceanic crust formed at the intermediate-spreading Costa Rica Rift (CRR). Despite S -wave data coverage being almost four-times lower than that of the P -wave data set, both velocity models demonstrate correlations in local variability and a long-wavelength increase in velocity with distance, and thus age, from the ridge axis of up to 0.8 and 0.6 km s−1, respectively. Using the Vp and V s models to calculate Poisson's ratio (σ), it reveals a typical structure for young oceanic crust, with generally high values in the uppermost crust that decrease to a minimum of 0.24 by 1.0–1.5 km sub-basement, before increasing again throughout the lower crust. The observed upper crustal decrease in σ most likely results from sealing of fractures, which is supported by observations of a significant decrease in porosity with depth (from ∼15 to <2 per cent) through the dyke sequence in Ocean Drilling Program borehole 504B. High Poisson's ratio (>0.31) is observed throughout the crust of the north flank of the CRR axis and, whilst this falls within the 'serpentinite' classification of lithological proxies, morphological evidence of pervasive surface magmatism and limited tectonism suggests, instead, that the cause is porosity in the form of pervasive fracturing and, thus, that this is the dominant control on seismic velocity in the newly formed CRR crust. South of the CRR, the values of Poisson's ratio are representative of more typical oceanic crust, and decrease with increasing distance from the spreading centre, most likely as a result of mineralization and increased fracture infill. This is supported by borehole observations and modelled 3-D seismic anisotropy. Crustal segments formed during periods of particularly low half-spreading rate (<35 mm yr−1) demonstrate high Poisson's ratio relative to the background, indicating the likely retention of increased porosity and fracturing associated with the greater degrees of tectonism at the time of their formation. Across the south flank of the CRR, we find that the average Poisson's ratio in the upper 1 km of the crust decreases with age by ∼0.0084 Myr−1 prior to the thermal sealing of the crust, suggesting that, to at least ∼7 Myr, advective hydrothermal processes dominate early CRR-generated oceanic crustal evolution, consistent with heat flow measurements. [ABSTRACT FROM AUTHOR]

3-D tomographic modelling of wide-angle seismic data, recorded at the intermediate-spreading Costa Rica Rift, has revealed a P -wave seismic velocity anomaly low located beneath a small overlapping spreading centre that forms a non-transform discontinuity at the ridge axis. This low velocity zone displays a maximum velocity anomaly relative to the 'background' ridge axis crustal structure of ∼0.5 km s−1, has lateral dimensions of ∼10 × 5 km, and extends to depths ≥2.5 km below the seabed, placing it within layer 2 of the oceanic crust. We interpret these observations as representing increased fracturing under enhanced tectonic stress associated with the opening of the overlapping spreading centre, that results in higher upper crustal bulk porosity and permeability. Evidence for ongoing magmatic accretion at the Costa Rica Rift ridge axis takes the form of an axial magma lens beneath the western ridge segment, and observations of hydrothermal plume activity and microearthquakes support the presence of an active fluid circulation system. We propose that fracture pathways associated with the low velocity zone may provide the system through which hydrothermal fluids circulate. These fluids cause rapid cooling of the adjacent ridge axis and any magma accumulations which may be present. The Costa Rica Rift exists at a tipping point between episodic phases of magmatic and tectonically enhanced spreading. The characteristics inherited from each spreading mode have been preserved in the crustal morphology off-axis for the past 7 Myr. Using potential field data, we contextualize our seismic observations of the axial ridge structure at the whole segment scale, and find that the proposed balance between magmatic and tectonically dominated spreading processes observed off-axis may also be apparent along-axis, and that the current larger-scale magma supply system at the Costa Rica Rift may be relatively weak. Based on all available geophysical observations, we suggest a model for the inter-relationships between magmatism, faulting and fluid circulation at the Costa Rica Rift across a range of scales, which may also be influenced by large lithosphere scale structural and/or thermal heterogeneity. [ABSTRACT FROM AUTHOR]

Ocean-bottom seismograph and multichannel streamer wide-angle seismic data are jointly analysed and compared with reflection images, bathymetric maps and potential field data, to reveal the detailed structure of layer 2 of the oceanic crust formed at the intermediate spreading Costa Rica Rift (CRR). Separate modelling of each wide-angle data set independently reveals a gradual increase in P -wave velocity with distance (hence crustal age) from the ridge axis, with a model derived from their joint inversion, in turn, displaying a pattern of shorter-wavelength structural complexity in addition to a background flow-line trend. Normalizing against a ridge-located reference velocity–depth model reveals that, off-axis, velocity perturbations are correlated with trends in basement roughness and uplift; regions of rougher and uplifted basement correlate with slower layer 2 velocity, <0.5 km s−1 faster than at the ridge axis, and thinner sediment cover, while smoother basement and locations where sediment cover forms a continuous seal over the oceanic basement, are mirrored by regions of relatively higher velocity, 1.0–1.4 km s−1 faster than at the CRR. These velocity variations are interpreted to reflect periodic changes in the degree of magma supply to the ridge axis. Using a combination of global and shipboard magnetic data, we derive a spreading history model for the CRR which shows that, for the past 5 Ma, spreading has been asymmetric. Comparing the seismic model structure with variations in full spreading rate over this period, reveals a correlation between periods of slower spreading and slower layer 2 velocity, basement roughness and uplift, and faster spreading, higher velocity and smoother basement structure. Zones of slower velocity also correlate with lows in the residual mantle Bouguer anomaly, interpreted as most likely reflecting corresponding regions of lower density in the lower crust or upper lithospheric mantle. Using ODP borehole 504B as ground-truth, we show that periods of faster spreading are associated with phases of magmatic accretion, interspersed by phases of increased asymmetric tectonic extension that likely facilitates fluid flow to the deeper crust and results in metamorphic alteration, manifest as the modelled density anomalies. Overall, our study shows that the mode of CRR crustal formation is sensitive to relatively small changes in full spreading rate within the range of 50–72 mm yr−1, that tips the balance between magmatic and magma-dominated crustal formation and/or tectonic stretching, as characterized by significant variation in the fabric and physical properties of layer 2. We further hypothesize that this inherited structure has a direct influence on the subsequent evolution of the crust through secondary alteration. We conclude that descriptive phrases like 'ocean crust formed at an intermediate-spreading rate' should no longer be used to describe an actual crustal formation process or resulting crustal structure as, over the full range of intermediate spreading rates, a fine tipping-point dictates an episodic transition between primarily magmatic accretion and magma-dominated crustal formation coupled with enhanced faulting, with their asymmetry recorded in either ridge flank. [ABSTRACT FROM AUTHOR]

Geophysical data from the Amazon Cone Experiment are used to determine the structure and evolution of the French Guiana and Northeast Brazil continental margin, and to better understand the origin and development of along-margin segmentation. A 427-km-long combined multichannel reflection and wide-angle refraction seismic profile acquired across the southern French Guiana margin is interpreted, where plate reconstructions suggest a rift-type setting. The resulting model shows a crustal structure in which 35–37-km-thick pre-rift continental crust is thinned by a factor of 6.4 over a distance of ∼70 km associated with continental break-up and the initiation and establishment of seafloor spreading. The ocean–continent boundary is a transition zone up to 45 km in width, in which the two-layered oceanic-type crustal structure develops. Although relatively thin at 3.5–5.0 km, such thin oceanic crust appears characteristic of the margin as a whole. There is no evidence of rift-related magmatism, either as seaward-dipping sequences in the reflection data or as a high velocity region in the lower crust in the P-wave velocity model, and as a such the margin is identified as non-volcanic in type. However, there is also no evidence of the rotated fault block and graben structures characteristic of rifted margins. Consequently, the thin oceanic crust, the rapidity of continental crustal thinning and the absence of characteristic rift-related structures leads to the conclusion that the southern French Guiana margin has instead developed in an oblique rift setting, in which transform motion also played a significant role in the evolution of the resulting crustal structure and along-margin segmentation in structural style. [ABSTRACT FROM AUTHOR]