Search

DNA quality is of paramount importance for molecular biology research. This study aimed to assess the DNA extracted from residual blood clots after serological testing, focusing on the impact of blood clot segments, extraction kits, temporary storage durations (TSDs), and thawing methods on DNA quality. We divided the residual blood clot column (BCC) from healthy donors into three segments and utilized two different extraction kits. The BCCs were subjected to four TSDs at 4°C (7 days, 10 days, 1 month, and 2 months) and three thawing methods (4°C, room temperature, and 37°C). We found that the TIANamp Blood Clot DNA Kit yielded consistently high‐quality DNA from each segment with stable A260/280 and A260/230 ratios. The DNA yield showed a strong positive correlation with leukocyte concentration, and a satisfactory median DNA yield of 28.79 μg/g BCC was obtained across all segments. DNA integrity, as measured by the DNA integrity number and DNA fragment peak size, decreased with increasing TSD at 4°C, with a notable decrease after 10 days of storage. Thawing at 37°C resulted in the lowest DNA fragment peak size. In conclusion, BCC could be an ideal DNA source with satisfactory yield and purity. A prolonged TSD at 4°C leads to an obvious decrease in DNA integrity, and thawing the frozen BCC at 37°C decreases DNA fragment sizes. To maintain DNA integrity, BCCs should be cryopreserved as soon as possible after short TSDs at 4°C and thawed at 4°C. Significance statement: This study aimed to improve the DNA quality of residual blood clot column (BCC) after serological testing, as this material could be a valuable DNA source. However, few studies have investigated whether centrifugation or commercial extraction kits would affect the DNA productivity of BCC. In addition, the effect of storage time at 4°C and the thawing method of frozen BCC on the DNA quality of BCC varied in previous studies. The results of this research showed that satisfactory DNA could be obtained from each segment of BCC using the TIANamp blood clot DNA kit. However, the DNA integrity number values and DNA fragment sizes decreased with increasing temporary storage durations at 4°C and thawing the frozen BCC at 37°C resulted in the lowest DNA fragment sizes. An optimized scheme for BCC preservation and utilization was established in this research, which provides additional options for DNA sources. [ABSTRACT FROM AUTHOR]

Faecal samples are an important source of genetic information for studies of wild animals. The quality and quantity of faecal DNA can, however, be affected by different factors. Our goal was to compare different dung sample storage and DNA extraction methods to optimise the quality and quantity of DNA extracted from forest elephant dung samples. Dung samples (n = 132) of forest elephants were collected in a forest area in Côte d'Ivoire. Each faecal sample was preserved in 50 mL cryotubes using five different methods: Ethanol 70%, formalin 10%, Sodium acetate, acetic acid, and formalin (SAF), dimethyl sulfoxide, and Sodium chloride (20% DMSO), and silica gel. We used the Cetyl Trimethyl Ammonium Bromide (CTAB) cationic detergent and the phenol chloroform DNA extraction procedures for comparison. DNA was successfully obtained from all 132 faecal samples using both DNA extraction methods. Regarding the total DNA extracted independently from the storage buffers, the phenol chloroform method yields a mean DNA concentration (2163.93 ± 918.62 ng/μL) sevenfold higher than that obtained with the optimised CTAB method (338.15 ± 528.54 ng/μL). Our study indicates optimised faecal sample storage and DNA extraction procedures that can help implement conservation strategies for forest elephants. [ABSTRACT FROM AUTHOR]

Background: Genetic and genomic studies are seeing an increase in sample sizes together with a wider range of species investigated in response to environmental change concerns. In turn, these changes may come with challenges including the time and difficulty to isolate nucleic acids (DNA or RNA), the sequencing cost and environmental impacts of the growing amount of plastic waste generated in the process. Pseudotsuga menziesii var. menziesii (Mirbel) Franco (PM), Tsuga heterophylla (Raf.) Sarg. (TH) and Thuja plicata Donn ex D.Don (TP) are conifer species found in diverse woodlands both as natives and naturalized exotics. Our study was carried out whilst investigating their genetics to understand their population structure and potential for adaptation. Results: In the present study, we compared two different DNA isolation methods, i.e., spin-column DNeasy plant mini kit (QIAGEN), and temperature-driven enzymatic cocktail Plant DNA Extraction (MicroGEM). The quantity of recovered DNA and the quality of DNA were assessed along with the plastic footprint and time needed for three tree species. Both methods were optimised and proven to provide enough DNA for each studied species. The yield of DNA for each method depended on the species: QIAGEN showed higher yield in P. menziesii and T. heterophylla, while T. plicata recovered similar amount of DNA for both methods. The DNA quality was investigated using DNA barcoding techniques by confirming species identity and species discrimination. No difference was detected in the PCR amplification of the two barcoding loci, (rbcL and trnH-psbA), and the recovered sequences between DNA isolation methods. Measurement of the plastic use and the processing time per sample indicated that MicroGEM had a 52.64% lower plastic footprint and was 51.8% faster than QIAGEN. Conclusions: QIAGEN gave higher yields in two of the species although both methods showed similar quality results across all species. However, MicroGEM was clearly advantageous to decrease the plastic footprint and improve the time efficiency. Overall, MicroGEM recovers sufficient and reliable DNA to perform common downstream analyses such as PCR and sequencing. Our findings illustrate the benefits of research and efforts towards developing more sustainable methods and techniques to reduce the environmental footprint of molecular analyses. [ABSTRACT FROM AUTHOR]

The human milk microbiota (HMM) of healthy women can vary substantially, as demonstrated by recent advances in DNA sequencing technology. However, the method used to extract genomic DNA (gDNA) from these samples may impact the observed variations and potentially bias the microbiological reconstruction. Therefore, it is important to use a DNA extraction method that is able to effectively isolate gDNA from a diverse range of microorganisms. In this study, we improved and compared a DNA extraction method for gDNA isolation from human milk (HM) samples to commercial and standard protocols. We evaluated the extracted gDNA using spectrophotometric measurements, gel electrophoresis, and PCR amplifications to assess its quantity, quality, and amplifiability. Additionally, we tested the improved method's ability to isolate amplifiable gDNA from fungi, Gram-positive and Gram-negative bacteria to validate its potential for reconstructing microbiological profiles. The improved DNA extraction method resulted in a higher quality and quantity of the extracted gDNA compared to the commercial and standard protocols and allowed for polymerase chain reaction (PCR) amplification of the V3–V4 regions of the 16S ribosomal gene in all the samples and the ITS-1 region of the fungal 18S ribosomal gene in 95% of the samples. These results suggest that the improved DNA extraction method demonstrates better performance for gDNA extraction from complex samples such as HM. [ABSTRACT FROM AUTHOR]

Formalin-fixed tissues possess irreplaceable value as a source of DNA for identification, especially when fresh samples are unavailable. Nonetheless, extracting and amplifying DNA from these tissues is challenging, primarily due to formaldehyde-induced cross-linking and nucleic acid fragmentation. In this study, two pre-extraction treatments, gradual dehydration using ethanol and pre-digestion heat treatments, and three DNA extraction methods, the Chelex-100 method, TIANamp FFPE DNA Kit, and ML Ultra-micro DNA extraction kit, were utilized to optimize DNA extraction from different tissues, which were fixed in 4% unbuffered formalin for different durations. The tissues include the heart, liver, spleen, lung, kidney, muscle, and brain. DNA quality was assessed, and quantification was conducted using Spectrophotometer and Quantifiler® Trio DNA Quantification Kits, while the GSTAR™ 25 kit was employed for STR detection. The results indicated that the two pre-extraction treatments exhibited no significant effect on the STR success rate. On day 9, allelic dropout was observed in the heart, liver, spleen, lung, and kidney tissues. Furthermore, allelic dropout was observed in muscle and brain at 12 days and 15 days, respectively. In conclusion, the results underscore the feasibility of effectively extracting DNA from formalin-fixed tissues within 9 days for subsequent STR analysis. [ABSTRACT FROM AUTHOR]

Microbial DNA extraction is a critical step in metagenomic research. High contents of chemical substances in wood tissues always cause low microbial DNA yield and quality. Up to date, almost no specialized methods involved in microbial DNA extraction from living wood were reported. In this study, an improved protocol (M1) concerning microbial DNA extraction from living poplar wood was developed. We compared microbial DNA yield and quality by M1 with those by other seven methods, including PowerSoil DNA isolation kit (M2), two soil microbial DNA extraction methods (M3 and M4), poplar genomic DNA extraction method from wood (M5), and microbial DNA extraction method from herb stems (M6), isolating bacteria (M7) and isolating fungus (M8). Results showed that M1 yielded much better quality and concentration of microbial DNA than the other methods (M2-M8) from both poplar wetwood and sapwood tissues. Following M1 protocol, 1 g of wetwood sample could yield 272.27 ng/ul (vol=50 ul) pure microbial DNA with the absorption ratios of 1.87 (A260/A230) and 1.66 (A260/A280). For 1 g of sapwood sample, these values were 361.83 ng/ul, 1.85 and 2.24, respectively. These DNA could be stably visualized by agarose gel electrophoresis and amplified by primer sets of bacteria (16S V3-V4, 16S-V4, 16S V4-V5) and fungus (ITS1, ITS2). While, the other seven methods only obtained less or contaminated microbial DNA, which could not be amplified stably by aforementioned primer sets. Our protocol provided an approach for microbial community study in living poplar wood in a more accurate way by molecular biology techniques. [ABSTRACT FROM AUTHOR]

As one of the main ingredients in some milk powders, whey powder is sometimes added to pure goat milk products, which can cause health risks, economic fraud, and unfair competition of food industries. This study is the first to explore qualitative and quantitative methods to identify adulteration of bovine whey powder in goat dairy products based on DNA. We extracted DNA from whey powder using a modified DNA extraction method; this exhibited good quality and integrity, with purity of 1.53 to 1.75 and concentration of 122 to 179 ng/μL. Conventional PCR and real-time PCR were compared for qualitative detection of bovine whey powder; real-time PCR demonstrated sensitivity of 0.01 ng/μL, which was higher than the 0.05 ng/μL detected by the conventional PCR method. Furthermore, real-time PCR was conducted for DNA quantitative detection, with good linearity (R2 = 0.9858) obtained for bovine whey powder contents from 0.1% to 30%. Relative error decreased with increase of the mixing proportion of whey powder; the coefficient of variation above 0.1% of the mixing ratio was close to or less than 5%; and the relative standard deviation of repeatability results was less than 5%. Considering the economic costs of testing, conventional PCR could be performed first, and samples with obvious intentional adulteration detected can be further accurately quantified by real-time PCR. Overall, this research provides a realistic and effective method for qualitative and quantitative identification of bovine whey powder in goat dairy products, thus laying a good foundation for verification of goat dairy product label claims and industrial control. [ABSTRACT FROM AUTHOR]

Xanthomonas citri pv. citri (Xcc) and X. citri pv. aurantifolii (Xca), causal agents of citrus bacterial canker, are both regulated by the European Union to prevent their introduction. Xcc is responsible for severe outbreaks of citrus production worldwide, therefore, a prompt and reliable detection is advisable for the early detection of this bacterium either in symptomatic or asymptomatic plant material. The current EPPO (European and Mediterranean Plant Protection Organization) diagnostic protocol, PM 7/44(1), includes several diagnostic tests even if new assays have been developed in the latter years for which validation data are needed. Recently, a test performance study was organized within the Valitest EU Project to validate Xcc diagnostic methods and provide evidence on the most reliable assays; however, the influence of DNA extraction methods (DEM) on the reliability of the detection has never been assessed. In this study we evaluate four different DEM, by following two different approaches: (i) a comparison by real-time PCR standard curves of bacterial DNA versus bacterial DNA added to plant DNA (lemon, leaves and fruit; orange fruit); and (ii) the evaluation of performance criteria of spiked samples (plant extract added with ten-fold diluted bacterial suspensions at known concentrations). Droplet digital PCR is developed and compared with real-time PCR, as the detection method. [ABSTRACT FROM AUTHOR]

Background: Microsatellite-based polymerase chain reaction (PCR) has great utility in microbial typing by analysis of band profiles of PCR amplicons. Bacterial DNA extraction methods affect yield and quality of DNA extract, and consequently subsequent molecular-based studies. The study aimed to evaluate impact of bacterial DNA extraction methods on band profiles of microsatellitebased PCR. Methods: Genomic DNA was extracted from Staphylococcus epidermidis ATCC 12228 using QIAamp kit, tween and SDS methods, and submitted to microsatellite-based PCR using (GACA)4 primer. For each extraction method, 4 concentrations were tested: the first crude extracted DNA and other 3 concentrations obtained by 1:1, 1:3, and 1:5 dilutions of the crude samples. Results: Yield and purity of DNA extracted by QIAamp kit were higher than those of other two methods. The PCR amplified all tested DNAs with generation of band profiles ranged from 2 to 11 bands in number, and from 200 bp to 1500 bp in size. Marked inter-method differences were found due to variation in band numbers and sizes. Band patterns obtained for QIAamp kit and tween methods were more robust than for SDS method. Variations of PCR patterns of different DNA concentrations within each method were minimal. Conclusions: Microsatellite-based PCR band profiles vary with different genomic DNA extraction methods for the same bacterial strain. Quality of extracted DNA is more influencing than its concentration. Therefore, it is recommended to unify the extraction method of bacterial DNA for all tested bacterial strains that are submitted to such type of PCR. [ABSTRACT FROM AUTHOR]

The methods applied for DNA extraction from must and wine samples with monovarietal origin are presented and discussed aiming to prove the quality of extracted DNA and its good properties for further use in molecular tests. In the present research were compared four different DNA extraction methods from must and wine samples obtained from eleven V. vinifera varieties (five grapevine varieties for white wines and six grapevine varieties for red wines, respectively). Taking into consideration the amounts of obtained DNA, the concentrations and purities of the final DNA extracts, were stood out two modified methods. For all must samples, very efficient was the second method, which allowed obtaining a mean value of 87.9 ng μl-1 for the DNA concentration with 1.55 purity. Among the tested procedures, for monovarietal wine samples, the fourth method proved to be the most efficient which brought a mean value of 64.7 ng μl-1 for DNA concentration with 1.66 purity. This method adequate for wine samples involves two CTAB solution treatments and the RNase treatment applied before DNA resuspension. The DNA from must and wine extracts and the DNA from leaves of the corresponding grapevine varieties were amplified with five specific microsatellite primers (VVS2, VVMD27, VVMD32, VrZAG79 and VrZAG62). The aspects of pattern profiles were analysed in parallel and proved that the extracted DNA was suitable for amplification with these specific V. vinifera primers. The two selected extraction procedures are considered good for research purposes and ensure obtaining of good-quality extracted DNA from musts and one-year old wines. [ABSTRACT FROM AUTHOR]

The quality and quantity of DNA extracts used for genetic analysis are of utmost importance. The isolation of DNA from different types of samples can be done by classical methods or using specific kits, whose working methodology must strictly follow the protocol established by the manufacturer. The aim of this research was to evaluate the effectiveness of DNA extraction from 50 blood samples of Romanian Grey cows found in various genetic conservation programs due to their small number in cattle herds. The obtained results are considered satisfactory in terms of the purity of the obtained DNA extracts, with only one sample (2% of the total) having the DNA isolate contaminated with proteins based on the absorbance ratio A260/A280 lower than 1.8. [ABSTRACT FROM AUTHOR]

Aim of the study: One of the critical steps in molecular oncology diagnostics is obtaining high quality genomic DNA. Therefore, it is important to evaluate and compare the techniques used to extract DNA from tissue samples. Since formalin-fixed, paraffin-embedded (FFPE) tissues are routinely used for both retrospective and prospective studies, we compared three commercially available methods of nucleic acid extraction in terms of quantity and quality of isolated DNA. Material and methods: Slides prepared from 42 FFPE blocks were macro-dissected. Resulting material was divided and processed simultaneously using three extraction kits: QIAamp DNA FFPE Tissue Kit (QIAGEN), Cobas DNA Sample Preparation Kit (Roche Molecular Systems) and Maxwell 16 FFPE Plus LEV DNA Purification Kit (Promega). Subsequently, quantity and quality of obtained DNA samples were analysed spectrophotometrically (NanoDrop 2000, Thermo Scientific). Results of quantitative analysis were confirmed by a fluorometric procedure (Qubit 3.0 Fluorometer, Life Technologies). Results: The results demonstrated that the yields of total DNA extracted using either Maxwell or Cobas methods were significantly higher compared to the QIAamp method (p < 0.001). The Maxwell Extraction Kit delivered DNA samples of the highest quality (p < 0.01). However, the highest total yield of extracted DNA was achieved with the Cobas technique, which may be due to a higher volume of eluate compared to the Maxwell method. Conclusions: To our knowledge, this is the first paper which directly compares three extraction methods: Cobas, Maxwell and QIAamp. The data herein provide information required for the selection of a protocol that best suits the needs of the overall study design in terms of the quantity and quality of the extracted DNA. [ABSTRACT FROM AUTHOR]

The low efficiency of some nucleic acid extraction protocols and the high cost of commercial products, derives in the comparison between methods. In the present work three DNA extraction methods were compared from soybean, to obtain nucleic acids of adequate concentration and quality for PCR amplification. The protocols studied included the methods with 1% and 3% CTAB solutions, with 1% sarcosine and with phenol/chloroform. The experiments were carried out in the DNA and Genomics laboratory of the National Genetic Resources Center-INIFAP. The yield, purity, integrity and functionality of the obtained nucleic acids were evaluated. In all methods, adequate DNA yield was achieved, however, the required purity of the material was only obtained with the phenol/chloroform solution. With the methods of CTAB at 1% and 3% and sarcosine, PCR inhibiting substances were observed, while, with phenol/chloroform, the values of the A260/280 ratio were in a range of 1.96 to 2.00 and the A260/230 ratio in a range of 1.75 to 2.44, with significant differences (p< 0.0001) with the rest of the methods, in addition, the DNA was of high molecular weight and the rbcL gene was amplified by PCR in all the samples. The use of the phenol/chloroform protocol allowed to obtain from soybean, nucleic acids of adequate concentration and quality for PCR amplification. [ABSTRACT FROM AUTHOR]

Background: Genomic DNA extracted from species of Cactaceae is often contaminated with significant amounts of mucilage and pectin. Pectin is one of the main components of cellular walls, whereas mucilage is a complex polysaccharide with a ramified structure. Thus, pectin- and mucilage-free extraction of DNA is a key step for further downstream PCR-based analyses. Results: We tested our DNA extraction method on cladode tissue (juvenile, adult, and herbaria exemplars) of 17 species of Opuntia Mill., which are characterized by a large quantity of pectin and mucilage. Conclusion: We developed a method for the extraction of gDNA free of inhibitory compounds common in species of Opuntia Mill., such as pectin and mucilage. Compared to previously extraction protocols, our method produced higher yields of high-quality genomic DNA. [ABSTRACT FROM AUTHOR]

The aim of the present study was to compare HPV16 detection by quantitative polymerase chain reaction (qPCR) in relation to the quantity and quality of DNA isolated from 21 formalin fixed and paraffin embedded (FFPE) head and neck cancer tissues by three commercially available kits: EX-WAX™ DNA Extraction Kit (M) (Merck Millipore, Darmstadt, Germany), QIAamp ® DNA FFPE Tissue (Q) (Qiagen, Hilden, Germany) and ReliaPrep™ FFPE gDNA Miniprep System (P) (Promega, Madison, USA). Quantity of extracted DNA was assessed spectrophometrically and fluorometrically. Its quality was analyzed using A260/280 and A260/230 ratios and the β-actin fragment amplifiability in qPCR. HPV16 presence was detected by qPCR, using specific primers and TaqMan probe. HPV infection was found in 8 DNA samples extracted with M kit (38.1%) and in 7 (33.3%) isolated with Q and P kits. Three samples from M and Q kits were characterized by HPV16 positivity and lack of β-actin amplifiability. They had significantly lower A260/280 ratio (M: 1.6 ± 0.0, p = 0.044 and Q: 1.7 ± 0.0, p = 0.016) compared to samples with both fragments amplification (M: 1.7 ± 0.0 and Q: 1.9 ± 0.0). Therefore, for HPV detection by qPCR in FFPE tissues we recommend ReliaPrep™ FFPE gDNA Miniprep System. [ABSTRACT FROM AUTHOR]

Existing evidence on the association of telomere length with life expectancy and the risk of various age related diseases is discordant. This inconsistency in the data may be due to methodological factors, e.g., the differences in the techniques for measuring telomere length, cell harvesting, DNA isolation, and material. One of the general requirements to experiments concerned with the measurement of telomere length is the high quality of DNA samples under study. The current review considers the most common errors during the measurement of telomere length associated with the improper quality of the biological material. [ABSTRACT FROM AUTHOR]

The efficiency of ten widely applied DNA extraction protocols was evaluated for suitability for diagnostic metagenomics. The protocols were selected based on a thorough literature study. Chicken fecal samples inoculated with about 1 × 10 3 and 1 × 10 6 CFU/g Campylobacter jejuni were used as a model. The evaluation was performed based on total DNA yield measured by fluorometry, and quality and quantity of C. jejuni DNA measured by real-time PCR. There was up to a 25-fold variance between the lowest (NucliSens miniMAG, BIOMÉRIEUX) and highest (PowerLyzer PowerSoil DNA Isolation Kit, MO BIO Laboratories) yielding protocols. The PowerLyzer PowerSoil DNA Isolation Kit performed significantly better than all other protocols tested. Selected protocols were modified, i.e., extended heating and homogenization, resulting in increased yields of total DNA. For QIAamp Fast DNA Stool Mini Kit (Qiagen) a 7-fold increase in total DNA was observed following the protocol for human DNA analysis and including a 5 min heating step at 70 °C. For the PowerLyzer PowerSoil and the PowerFecal DNA Isolation Kit (MO BIO Laboratories) the total DNA fold increase was 1.6 to 1.8 when including an extra 10 min of bead-vortexing. There was no correlation between the yield of total DNA and the amount of PCR-amplifiable DNA from C. jejuni . The protocols resulting in the highest yield of total DNA did not show correspondingly increased levels of C. jejuni DNA as determined by PCR. In conclusion, substantial variation in the efficiency of the protocols to extract DNA was observed. The highest DNA yield was obtained with the PowerLyzer PowerSoil DNA Isolation Kit, whereas the FastDNA SPIN Kit for Feces (MP Biomedicals) resulted in the highest amount of PCR-amplifiable C. jejuni DNA. [ABSTRACT FROM AUTHOR]

Because of their specificity and high throughput, real-time PCR-based methods are suitable for the monitoring of genetically modified (GM) organisms at field level or in the grain trade, in order to comply with federal regulations on biosafety. In the first part of this study, DNA extracted from different maize (Zea mays L.) tissues using several commercial purification protocols available in Mexico were evaluated in terms of DNA quality as substrates for end-point PCR. In this second part, DNA preparations obtained from grain, by means of the same commercial protocols, were tested in quantitative PCR (qPCR), using TaqMan and SYBR Green protocols. Linear dynamic range, amplification efficiency and method accuracy were assessed using recommended qPCR criteria for validation purposes. Results showed that the chemical complexity of plant tissues, such as grains, require an efficient purification protocol for consistent and reliable PCR quantification. The ratio A260/280 and DNA visualization in agarose gels are recommended as preliminary –but not exclusive– criteria of DNA quality because DNA amplification capability is not evinced with these procedures. Two of the methods tested yielded good-quality DNA as revealed by the linear dynamic range analysis. The third method analyzed rendered inaccurate results due to the presence of grain endogenous PCR inhibitors that did not allow a proper DNA quantification. As conclusion, TaqMan chemistry showed to be more sensitive to the presence of impurities than SYBR Green, even though amplification could be achieved in the latter, quantification may not be accurate. Silica DNA-binding membranes yield the most suitable DNA preparations for PCR quantification of GM maize grains. [ABSTRACT FROM AUTHOR]

Nowadays, molecular analyses play an important role in studies of soil dwelling animals, for example in taxonomy, phylogeography or food web analyses. The quality of the DNA, used for later molecular analyses, is an important factor and depends on collection and preservation of samples prior to DNA extraction. Ideally, DNA samples are frozen immediately upon collection, but if samples are collected in the field, suitable preservation methods might be limited due to unavailability of resources or remote field sites. Moreover, shipping samples over long distances can cause loss of DNA quality e.g. by thawing or leaking of preservation liquid. In this study we use earthworms, a key organism in soil research, to compare three different DNA preservation methods – freezing at −20 °C, storing in 75% ethanol, and freeze drying. Samples were shipped from the United States of America to Austria. The DNA of the samples was extracted using two different extraction methods, peqGOLD™ and Chelex® 100. The DNA amplification success was determined by amplifying four DNA fragments of different length. The PCR amplification success is significantly influenced by preservation method and extraction method and differed significantly depending on the length of the DNA fragment. Freeze drying samples was the best preservation method when samples were extracted using the silica based extraction method peqGOLD™. For samples that were extracted with Chelex® 100, storage in ethanol was the best preservation method. However, the overall amplification success was significantly lower for the extraction procedure based on Chelex® 100. The detection of the small DNA fragments was higher and independent from the extraction method, while the amplification success was significantly reduced for the longer DNA fragments. We recommend freeze drying of DNA samples, especially when they have to be shipped for longer distances. No special packaging or declaration is needed for freeze dried samples, and the risk of thawing is excluded. Storage of freeze dried samples also reduces costs because samples can be kept at room temperature in a desiccator. It should be noted, that the extraction methods showed significant differences in DNA amplification success. Thus, the extraction method should be taken into account when choosing the preservation method. [ABSTRACT FROM AUTHOR]