Search

An instrumented creep testing capability is being developed for specimens irradiated in pressurized water reactor coolant conditions at the Advanced Test Reactor (ATR). A test rig has been developed such that samples will be subjected to stresses up to 350 MPa at temperatures up to 370°C in pile. Initial Idaho National Laboratory (INL) efforts to develop this creep testing capability for the ATR are summarized. In addition to providing an overview of in-pile creep test capabilities available at other test reactors, this paper reports efforts by the INL to evaluate a prototype test rig in an autoclave at INL's High Temperature Test Laboratory. Data from autoclave tests with Type 304 stainless steel and copper specimens are reported. [ABSTRACT FROM AUTHOR]

Over 50 years of nuclear fuels and materials irradiation testing has led to many countries developing significant improvements in instrumentation to monitor physical parameters and to control the test conditions in material test reactors (MTRs). Recently, there is increased interest to irradiate new materials and reactor fuels for advanced pressurized water reactors and Gen-IV reactor systems, such as sodium-cooled fast reactors, very high temperature reactors, supercritical water-cooled reactors, and gas-cooled fast reactors. This review paper documents the current state of instrumentation technologies in MTRs in the world and summarizes ongoing research efforts to deploy new sensors. As described in this paper, a wide range of sensors is available to measure key parameters of interest during fuels and materials irradiations in MTRs. Ongoing development efforts focus on providing MTR users a wider range of parameter measurements with smaller, higher accuracy sensors. [ABSTRACT FROM AUTHOR]

A key component of the Advanced Test Reactor (ATR) National Scientific User Facility (NSUF) effort is to expand instrumentation available to users conducting irradiation tests in this unique facility. In particular, development of sensors capable of providing real-time measurements of key irradiation parameters is emphasized because of their potential to increase data fidelity and reduce posttest examination costs. This paper describes the strategy for identifying new instrumentation needed for ATR irradiations and the program underway to develop and evaluate new sensors to address these needs. Accomplishments from this program are illustrated by describing new sensors now available to users of the ATR NSUF. In addition, progress is reported on current research efforts to provide improved in-pile instrumentation to users. [ABSTRACT FROM AUTHOR]

As part of a process initiated through the Advanced Test Reactor (ATR) National Scientific User Facility (NSUF) program to make Silicon Carbide (SiC) temperature monitors available for experiments, a capability was developed at the Idaho National Laboratory (INL) to complete post-irradiation evaluations of these monitors. INL selected the resistance measurement approach for detecting peak irradiation temperature from SiC temperature monitors. To demonstrate this new capability, comparison measurements were completed by INL and Oak Ridge National Laboratory (ORNL) on identical samples subjected to identical irradiation conditions. Results reported in this paper indicate that the resistance measurement approach yields similar peak irradiation temperatures if appropriate equipment is used and appropriate procedures are followed. [ABSTRACT FROM AUTHOR]