Search

NMR methods were applied for lubricant analysis. Different factors influence the real aging of lubricants on diverse length scales and are captured by NMR. Chemical conversion of additives is addressed by NMR spectroscopy. High‐field NMR experiments allow the identification and quantification of chemical components and are transferred to benchtop devices. Molecular dynamics and contaminations like fuel or abrasion are addressed via NMR relaxation and diffusion. Quality parameters were extracted via suitable data analysis of NMR raw data, which allow the detection of aging and indicate changes in the oil composition. At the same time, the methodology is optimized to the conditions in quality control. The feasibility is shown the example of a series of lubricants from applications in regenerative energy production, namely, wind turbine oils and biogas motor oils. [ABSTRACT FROM AUTHOR]

Abstract: Superabsorbent polymer (SAP) hydrogels have pronounced water‐absorbing and water‐storing capacities, which are essential for numerous potential applications. It remains a challenge to better understand the network topology because of their amorphous and anisotropic structures. Synthesis parameters such as monomer concentration, degree of neutralization and crosslinking, and surface crosslinking are varied to correlate structural changes in the network with low‐field proton double‐quantum (1H DQ) NMR results. 1H DQ‐NMR data are processed by a reliable, user‐independent analysis approach to determine the fractions of network defects, of mobile sol components, and of network chains as well as the residual dipolar coupling distribution in SAPs. In addition, results obtained by applying different distributions to describe the DQ buildup curves are quantified and compared. The correlation between topological and synthesis parameters as well as the impact of temperature, swelling, and solvent of SAP on DQ signals is investigated and discussed. [ABSTRACT FROM AUTHOR]

Medium-resolution nuclear magnetic resonance spectroscopy (MR-NMR) currently develops to an important analytical tool for both quality control and process monitoring. In contrast to high-resolution online NMR (HR-NMR), MR-NMR can be operated under rough environmental conditions. A continuous re-circulating stream of reaction mixture from the reaction vessel to the NMR spectrometer enables a non-invasive, volume integrating online analysis of reactants and products. Here, we investigate the esterification of 2,2,2-trifluoroethanol with acetic acid to 2,2,2-trifluoroethyl acetate both by 1H HR-NMR (500 MHz) and 1H and 19F MR-NMR (43 MHz) as a model system. The parallel online measurement is realised by splitting the flow, which allows the adjustment of quantitative and independent flow rates, both in the HR-NMR probe as well as in the MR-NMR probe, in addition to a fast bypass line back to the reactor. One of the fundamental acceptance criteria for online MR-MNR spectroscopy is a robust data treatment and evaluation strategy with the potential for automation. The MR-NMR spectra are treated by an automated baseline and phase correction using the minimum entropy method. The evaluation strategies comprise (i) direct integration, (ii) automated line fitting, (iii) indirect hard modelling (IHM) and (iv) partial least squares regression (PLS-R). To assess the potential of these evaluation strategies for MR-NMR, prediction results are compared with the line fitting data derived from the quantitative HR-NMR spectroscopy. Although, superior results are obtained from both IHM and PLS-R for 1H MR-NMR, especially the latter demands for elaborate data pretreatment, whereas IHM models needed no previous alignment. Copyright © 2015 John Wiley & Sons, Ltd. [ABSTRACT FROM AUTHOR]

Thiswork presents an experimental study of the network structureof swollen, charged hydrogels. We provide an in-depth comparison oftwo proton low-field NMR methods, i.e., transverse relaxation anddouble-quantum spectroscopy, that are both sensitive to residual orientationcorrelations of the network chain segments. The results are in bothcases analyzed by help of integral inversion techniques, and bothmethods are demonstrated to provide comparable results despite themore qualitative nature of the transverse relaxation. We investigatemodel samples that are similar to commercial superabsorber materialsbased on partly neutralized and chemically cross-linked poly(acrylicacid) as prepared by free radical polymerization. The degree of cross-linkingand the monomer concentration are varied during synthesis. Both parametersare found to affect the network structure and the amount of elasticallyinactive defects in a systematic way, and a comparison with commercialsamples with homogeneous or purposely inhomogeneous core–shellstructures proves that the cross-linking bimodality of the latteris readily revealed despite the rather large intrinsic inhomogeneityof the swollen gels. [ABSTRACT FROM AUTHOR]

Polyacrylate hydrogels PAAM (M = 7Li+, 23Na+, 39K+, 87Rb+, and 133Cs+) are synthesized by free‐radical copolymerization and are studied by Nuclear Magnetic Resonance (NMR) over wide time and length scales to get an insight into the polymer network structure and the dynamics of alkali ions and water. 1H double‐quantum NMR (1H DQ‐NMR) indicates that neutralization by different alkali ions influences the polymer structure in swollen PAAM hydrogels. Relaxation rates of alkali ions are found to be dominated by quadrupolar relaxation. 1H relaxation varies with the chain fraction obtained from 1H DQ‐NMR. Pulsed field gradient NMR reveals diffusion coefficients of alkali ions and water for different swelling degrees. Network structure and dynamics as well as the interactions between water, alkali ions, and polymer chains are discussed. [ABSTRACT FROM AUTHOR]

The determination of the interplay between polymeric matrices and filler particles in composites is of great interest to understand structure-property relationships and develop predictive theories. To study the molecular dynamics of polymers in composites, model systems based on poly(n-alkyl methacrylates), trans-1,4-polyisoprene (gutta percha), and titania (TiO2) were prepared and characterized using rheometry and a combined RheoNMR technique. Apparent entanglement molecular weights were obtained from small amplitude oscillatory shear (SAOS) experiments, which are related to the increasing physical cross-link density as a function of the filler content. Large amplitude oscillatory shear (LAOS) experiments were performed and analyzed within the FT-rheometry framework. The filler had a strong impact on the scaling behavior of the normalized third harmonic. A combined RheoNMR technique was used to simultaneously study the molecular dynamics via NMR and the corresponding mechanical response via rheometry. A strong correlation between the macroscopic mechanical properties and microscopic molecular dynamics was found, which might lead to a new understanding of polymer melt dynamics. [ABSTRACT FROM AUTHOR]

Abstract: The design of sample flow cells, commonly used in on-line analytics and especially for medium resolution NMR spectroscopy (MR-NMR) in low magnetic fields, was experimentally and theoretically investigated by 1H NMR and numerical simulations. The flow pattern was characterised to gain information about the residence time distribution and mixing effects. Both 1H NMR imaging and spectroscopy were used to determine the characteristics of flow cells and their significance for on-line measurements such as reaction monitoring or hyphenated separation spectroscopy. The volume flow rates investigated were in the range from 0.1 to 10ml/min, typically applied in the above mentioned applications. The special characteristics of flow cells for MR-NMR were revealed by various NMR experiments and compared with CFD simulations and to flow cells commonly used in high-field NMR. The influence of the design of the inlet and outlet on the flow pattern was investigated as well as the effect of the length of the cell. For practical use, a numerical estimation of the inflow length was given. In addition, it was shown how experiments on the polarisation build-up revealed insight into the flow characteristics in MR-NMR. [Copyright &y& Elsevier]

Abstract: Quasi-isothermal curing of a polyester resin was studied at different catalyst concentrations and temperatures in-situ by 1H-NMR relaxometry and NIR spectroscopy simultaneously. Sample and probe temperatures were also recorded. An autocatalytic kinetic model, optionally including a diffusion term, was successfully applied to describe and predict the curing kinetics of the polyester resin as a function of temperature and catalyst concentration, although the diffusion effect is relatively weak in the investigated system under the experimental conditions. The corresponding kinetic coefficients and the reaction activation energy were obtained by fitting the models to the data, assuming an Arrhenius relation. [Copyright &y& Elsevier]

Compact nuclear magnetic resonance (NMR) instruments make NMR spectroscopy and relaxometry accessible in industrial and harsh environments for reaction and process control. An increasing number of applications are reported. To build an interdisciplinary bridge between “process control” and “compact NMR”, we give a short overview on current developments in the field of process engineering such as modern process design, integrated processes, intensified processes along with requirements to process control, model based control, or soft sensing. Finally, robust field integration of NMR systems into processes environments, facing explosion protection or integration into process control systems, are briefly discussed. [ABSTRACT FROM AUTHOR]

Hypothesis The accuracy of the inner water droplet size determination of W/O/W emulsions upon water diffusion measurement by diffusion NMR was evaluated. The resulting droplet size data were compared to the results acquired from the diffusion measurement of a highly water soluble marker compound with low permeability in the oil layer of a W/O/W emulsion, which provide a closer representation of the actual droplet size. Differences in droplet size data obtained from water and the marker were ascribed to extra-droplet water diffusion. Experiments The diffusion data of the tetramethylammonium cation marker were measured using high-resolution pulsed field gradient NMR, whereas the water diffusion was measured using both low-resolution and high-resolution NMR. Different data analysis procedures were evaluated to correct for the effect of extra-droplet water diffusion on the accuracy of water droplet size analysis. Findings Using the water diffusion data, the use of a low measurement temperature and diffusion delay Δ could reduce the droplet size overestimation resulting from extra-droplet water diffusion, but this undesirable effect was inevitable. Detailed analysis of the diffusion data revealed that the extra-droplet diffusion effect was due to an exchange between the inner water phase and the oil phase, rather than by exchange between the internal and external aqueous phase. A promising data analysis procedure for retrieving reliable size data consisted of the application of Einstein’s diffusion law to the experimentally determined diffusion distances. This simple procedure allowed determining the inner water droplet size of W/O/W emulsions upon measurement of water diffusion by low-resolution NMR at or even above room temperature. [ABSTRACT FROM AUTHOR]

Medium resolution nuclear magnetic resonance (MR-NMR) spectroscopy is currently a fast developing field, which has an enormous potential to become an important analytical tool for reaction monitoring, in hyphenated techniques, and for systematic investigations of complex mixtures. The recent developments of innovative MR-NMR spectrometers are therefore remarkable due to their possible applications in quality control, education, and process monitoring. MR-NMR spectroscopy can beneficially be applied for fast, non-invasive, and volume integrating analyses under rough environmental conditions. Within this study, a simple 1/16″ fluorinated ethylene propylene (FEP) tube with an ID of 0.04″ (1.02 mm) was used as a flow cell in combination with a 5 mm glass Dewar tube inserted into a benchtop MR-NMR spectrometer with a 1 H Larmor frequency of 43.32 MHz and 40.68 MHz for 19 F. For the first time, quasi-simultaneous proton and fluorine NMR spectra were recorded with a series of alternating 19 F and 1 H single scan spectra along the reaction time coordinate of a homogeneously catalysed esterification model reaction containing fluorinated compounds. The results were compared to quantitative NMR spectra from a hyphenated 500 MHz online NMR instrument for validation. Automation of handling, pre-processing, and analysis of NMR data becomes increasingly important for process monitoring applications of online NMR spectroscopy and for its technical and practical acceptance. Thus, NMR spectra were automatically baseline corrected and phased using the minimum entropy method. Data analysis schemes were designed such that they are based on simple direct integration or first principle line fitting, with the aim that the analysis directly revealed molar concentrations from the spectra. Finally, the performance of 1/16″ FEP tube set-up with an ID of 1.02 mm was characterised regarding the limit of detection (LOQ ( 1 H) = 0.335 mol L −1 and LOQ ( 19 F) = 0.130 mol L −1 for trifluoroethanol in D 2 O (single scan)) and maximum quantitative flow rates up to 0.3 mL min −1 . Thus, a series of single scan 19 F and 1 H NMR spectra acquired with this simple set-up already presents a valuable basis for quantitative reaction monitoring. [ABSTRACT FROM AUTHOR]