Search

The system thermal-hydraulic (STH) code ATHLET was coupled with the commercial 3D computational fluid dynamics (CFD) software package ANSYS CFX to improve ATHLET simulation capabilities for flows with pronounced 3D phenomena such as flow mixing and thermal stratification. Within the FP7 European project THINS (Thermal Hydraulics of Innovative Nuclear Systems), validation activities for coupled thermal-hydraulic codes are being carried out. The TALL-3D experimental facility, operated by KTH Royal Institute of Technology in Stockholm, is designed for thermal-hydraulic experiments with lead-bismuth eutectic (LBE) coolant at natural and forced circulation conditions. GRS carried out pre-test simulations with ATHLET–ANSYS CFX for the TALL-3D experiment T01, while KTH scientists perform these analyses with the coupled code RELAP5/STAR CCM+. In the experiment T01 the main circulation pump is stopped, which leads to interesting thermal-hydraulic transient with local 3D phenomena. In this paper, the TALL-3D behavior during T01 is analyzed and the results of the coupled pre-test calculations, performed by GRS (ATHLET–ANSYS CFX) and KTH (RELAP5/STAR CCM+) are directly compared.

One of the most interesting technologies recognized as promising for the future of nuclear energy is the Accelerator Driven System (ADS). The purpose of the ADS is to function as an element of an integrated nuclear power enterprise comprising of conventional and advanced power reactors for energy production, and for reducing the radiotoxicity of the nuclear waste produced by these power reactors before entombment in a geologic repository ( Stanculescu, 2000 ). The use of new types of coolants such as molten lead or lead–bismuth eutectic alloy (LBE) represents another particular feature in the design concept of these reactors, since it permits one to take advantage of higher Heavy Liquid Metals (HLM) boiling temperature compared to water, leading to an improvement in thermal efficiency. Furthermore, it allows the reactor to be operated at a lower pressure, thus reducing the probability of a Loss-Of-Coolant Accident (LOCA) and, consequently, increasing reactor safety. The proposed use of relatively new types of coolants, especially in combination with new fuel types and cladding materials, demands specific attention to the thermal–hydraulics and core mechanics in normal and abnormal conditions. For that reason, a detailed analysis using system codes is necessary. In this paper, a new version of the ATHLET system code is tested, in which the physical properties of liquid metals like sodium, lead and LBE are implemented. The object of this study is the spallation loop of the MYRRHA facility, in which LBE is circulated by forced convection to remove the heat deposited by a proton beam. A detailed nodalization is set up for performing thermal–hydraulic calculations for both nominal conditions and accident scenarios in order to have a good characterization of the entire loop. The start-up transient has verified the correct removal of the heat generated in the target by the foreseen heat exchanger. During accidental transients, it was noted that the level of LBE in the beam line changes in agreement with preliminary studies on the target device. The pump failure test represents the most dangerous scenario, as the temperature in the target area will reach a very high value within a few seconds after the blockage of the pump impeller. The results obtained have subsequently been compared to the ones achieved with previous numerical simulations which were performed using a version of RELAP5/mod 3.3 system code that was modified at the University of Pisa to account for LBE properties. The comparison has confirmed the capability of the new version of the ATHLET code for the analysis of hydraulic circuits cooled by liquid metals, although both codes use different heat transfer correlations.