Search

The Target Station at the European Spallation Source (ESS) is designed to convert high power proton beam to high brightness neutron beams, for studying fundamental properties of materials. Upon commissioning of the 'beam on target' planned in 2022, the ESS linac will deliver lower energy proton beam than the design value of 2 GeV, for neutron production. The beam energy will then be gradually ramped up, with the sequential commissioning of the downstream part of the superconducting cryomodules. During neutron production, the beam intercepting devices and moderators are exposed to intense flux of primary and secondary particles, suffering from radiation induced structural degradation. The extent of the radiation damage depends on the energy and intensity of the impinging protons. Currently, the lifetime criteria determined for these components are based on the 2 GeV beam energy. To secure availability and reliability of the neutron production during the beam energy ramp-up phase, the radiation damage rates in these components should be reassessed and the lifetime criteria be adjusted. In this paper, we present the lifetime criteria for the beam intercepting devices and moderators for different beam energies, to serve for the planning of the maintenance and replacement schedule during the proton energy ramp-up phase. [ABSTRACT FROM AUTHOR]

VENUS is an imaging instrument that will use a broad range of neutron wavelengths, from epithermal to cold, will include enhanced contrast mechanisms, and will offer novel energy-selective imaging techniques that directly connect the structures, properties, and function of complex engineering materials and systems to reveal practical and fundamental answers about their real-world performance. The instrument is to be built at SNS beam line 10 and will face the decoupled poisoned hydrogen moderator. The driving cost for the instrument is the beam line and instrument cave shielding. Initial scoping analyses were performed to estimate thickness and composition of shielding materials for the instrument cave and beam line. In light of the upcoming Proton Power Upgrade (PPU) project, these transport analyses were performed for proton beam on target at 1.3 GeV and 2 MW. [ABSTRACT FROM AUTHOR]

The European Spallation Source being constructed in Lund, Sweden will provide the user community with a neutron source of unprecedented brightness. By 2025, a suite of 15 instruments will be served by a high-brightness moderator system placed above the spallation target. The ESS infrastructure, consisting of the proton linac, the target station, and the instrument halls, allows for implementation of a second source below the spallation target. We propose to develop a second neutron source with a high-intensity moderator able to (1) deliver a larger total cold neutron flux, (2) provide high intensities at longer wavelengths in the spectral regions of Cold (4–10 Å), Very Cold (10–40 Å), and Ultra Cold (several 100 Å) neutrons, as opposed to Thermal and Cold neutrons delivered by the top moderator. Offering both unprecedented brilliance, flux, and spectral range in a single facility, this upgrade will make ESS the most versatile neutron source in the world and will further strengthen the leadership of Europe in neutron science. The new source will boost several areas of condensed matter research such as imaging and spin-echo, and will provide outstanding opportunities in fundamental physics investigations of the laws of nature at a precision unattainable anywhere else. At the heart of the proposed system is a volumetric liquid deuterium moderator. Based on proven technology, its performance will be optimized in a detailed engineering study. This moderator will be complemented by secondary sources to provide intense beams of Very- and Ultra-Cold Neutrons. [ABSTRACT FROM AUTHOR]

Target station 1 (TS1) is currently in the implementation stage of a large sustainability project to continue future operation, in addition to making improvements to the neutron performance, ease of operation, and various other factors (J. Phys.: Conf. Ser.1021 (2018) 012053). One aspect of this project is the extraction of the current irradiated equipment situated within the target area to enable the replacement of the target, reflector and moderator assembly (TRaM). This new assembly will be modular to allow any future upgrades to be installed swiftly. Removal of the current TRaM systems support structure is discussed within this paper. This extraction comes with challenges; due to its abnormal size, the welded structure cannot simply be placed in a shielded flask and removed, it instead must be cut up into 2 sections inside the remote handling cell (RHC) (J. Phys.: Conf. Ser.1021 (2018) 012077). Testing has been completed using a gravity fed hydraulic bandsaw, and various components have been manufactured to allow ease of adjustment using the remote handling system. However, there is still work to be done before the shutdown in 2020. [ABSTRACT FROM AUTHOR]

Rotating objects, such as choppers, are common components of a neutron beamline, and the motion of these components is not described in the static geometry of an MCNPX model. The special case of non-static surfaces for rotation about a stationary point in space has been developed for MCNPX. In addition, velocity dependent kinematics due to the motion of the medium have been implemented. This implementation allows for the simulation of rotating objects at speeds comparable to the velocity of cold neutrons. Applications of the chopper extension will be discussed, including the direct simulation of a bandwidth chopper system, the thermalization of neutrons inside a spinning material, and the discussion of the implementation of a spinning single crystal. [ABSTRACT FROM AUTHOR]

64Cu is an emerging radionuclide of great interest in personalized nuclear medicine. It is produced by a cyclotron via the reaction 64Ni(p,n)64Cu. This production method increased during the last decades, because small biomedical cyclotrons can be easily installed close to the nuclear medicine department of a hospital. As a matter of fact, 64Ni is a very expensive target material. For this reason, an alternative 64Cu production method was investigated at ENEA by using the quasi-monochromatic 14 MeV fusion neutron beam made available at the Frascati Neutron Generator (FNG) located at the ENEA – Frascati Research Center. In particular, two nuclear reactions were studied: 65Cu(n,2n)64Cu and 64Zn(n,p)64Cu. The radiochemical analysis of the activated samples was performed at the ENEA-NMLNWM laboratory located in ENEA-Casaccia Research Center. The activity measurements were carried out at the ENEA-INMRI, located in the ENEA-Casaccia Research Center, with high metrological level conditions and by assuring their traceability to the 64Cu primary activity standard here developed and maintained. A prediction of the 64Cu production by means of the high-brilliance 14 MeV neutron source named Sorgentina is also discussed. [ABSTRACT FROM AUTHOR]

The neutron Time-Of-Flight (n_TOF) facility at the European Laboratory for Particle Physics (CERN) is a pulsed white-spectrum neutron spallation source producing neutrons for two experimental areas: EAR1, located 185 m downstream of the spallation target, and EAR2, located 20 m above the target. The facility is based on a lead target impacted by a high-intensity 20 GeV/c proton beam. It is designed to study neutron-nucleus interactions for neutron kinetic energies from a few meV to several GeV, with applications in nuclear astrophysics, nuclear technology, and medical research. The facility is undergoing a major upgrade in 2019–2020, which will include the installation of the new third-generation target. The second-generation target consists in a water-cooled lead cylinder, while the new target will be cooled by nitrogen to avoid erosion-corrosion phenomena and contamination of the cooling water with radioactive lead spallation products. The new design will be optimized also for the vertical flight path. The operation of the new spallation target will start in 2021. This paper presents an overview on the evolution of the design and on the related R&D activities (including beam irradiation tests) carried out to ensure the best performance for both experimental areas and avoid the contamination issues of the previous targets. [ABSTRACT FROM AUTHOR]

The transport of neutrons in long beamlines at spallation neutron sources presents a unique challenge for Monte-Carlo transport calculations. This is due to the need to accurately model the deep-penetration of high-energy neutrons through meters of thick dense shields close to the source and at the same time to model the transport of low- energy neutrons across distances up to around 150 m in length. Typically, such types of calculations may be carried out with MCNP-based codes or alternatively PHITS. However, in recent years there has been an increased interest in the suitability of Geant4 for such types of calculations. Therefore, we have implemented supermirror physics, a neutron chopper module and the duct-source variance reduction technique for low- energy neutron transport from the PHITS Monte-Carlo code into Geant4. In the current work, we present a series of benchmarks of these extensions with the PHITS software, which demonstrates the suitability of Geant4 for simulating long neutron beamlines at a spallation neutron source, such as the European Spallation Source, currently under construction in Lund, Sweden. [ABSTRACT FROM AUTHOR]

An experimental procedure is assessed to obtain moderated neutron fields starting from almost monochromatic 14 MeV neutrons generated by means of an accelerator-driven D-T source. The use of a metallic pre-moderator and a standard hydrogen-containing moderator is effective in producing neutron spectra featuring a thermal peak and an epithermal slowing down tail extending up to 14 MeV. The performance of proposed moderation system was investigated by means of MCNP Monte Carlo calculations, benchmarked against experimental measurements using an explorative set up, assembled at the Frascati Neutron Generator. The benchmarked calculations allow at making predictions about the brilliance of a 14 MeV neutron moderator in view of possible applications in neutron science. [ABSTRACT FROM AUTHOR]

Motion of water molecules in Aerosol OT [sodium bis(2-ethylhexyl) sulfosuccinate, AOT] reverse micelles with water content w0 ranging from 1 to 5 has been explored both experimentally through quasielastic neutron scattering (QENS) and with molecular dynamics (MD) simulations. The experiments were performed at the energy resolution of 85 μeV over the momentum transfer (Q) range of 0.36–2.53 Å-1 on samples in which the nonpolar phase (isooctane) and the AOT alkyl chains were deuterated, thereby suppressing their contribution to the QENS signal. QENS results were analyzed via a jump-diffusion/isotropic rotation model, which fits the results reasonably well despite the fact that confinement effects are not explicitly taken into account. This analysis indicates that in reverse micelles with low-water content (w0=1 and 2.5) translational diffusion rate is too slow to be detected, while for w0=5 the diffusion coefficient is much smaller than for bulk water. Rotational diffusion coefficients obtained from this analysis increase with w0 and are smaller than for bulk water, but rotational mobility is less drastically reduced than translational mobility. Using the Faeder/Ladanyi model [J. Phys. Chem. B 104, 1033 (2000)] of reverse micelle interior, MD simulations were performed to calculate the self-intermediate scattering function FS(Q,t) for water hydrogens. Comparison of the time Fourier transform of this FS(Q,t) with the QENS dynamic structure factor S(Q,ω), shows good agreement between the model and experiment. Separate intermediate scattering functions FSR(Q,t) and FSCM(Q,t) were determined for rotational and translational motion. Consistent with the decoupling approximation used in the analysis of QENS data, the product of FSR(Q,t) and FSCM(Q,t) is a good approximation to the total FS(Q,t). We find that the decay of FSCM(Q,t) is nonexponential and our analysis of the MD data indicates that this behavior is due to lower water mobility close to the interface and to confinement-induced restrictions on the range of translational displacements. Rotational relaxation also exhibits nonexponential decay. However, rotational mobility of O-H bond vectors in the interfacial region remains fairly high due to the lower density of water-water hydrogen bonds in the vicinity of the interface. © 2004 American Institute of Physics. [ABSTRACT FROM AUTHOR]

Rotating objects, such as choppers, are common components of a neutron beamline, and the motion of these components is not described in the static geometry of an MCNPX model. The special case of non-static surfaces for rotation about a stationary point in space has been developed for MCNPX. In addition, velocity dependent kinematics due to the motion of the medium have been implemented. This implementation allows for the simulation of rotating objects at speeds comparable to the velocity of cold neutrons. Applications of the chopper extension will be discussed, including the direct simulation of a bandwidth chopper system, the thermalization of neutrons inside a spinning material, and the discussion of the implementation of a spinning single crystal. [ABSTRACT FROM AUTHOR]