Search

Studying the interactions between nanoengineered materials and biological systems plays a vital role in the development of biological applications of nanotechnology and the improvement of our fundamental understanding of the bio-nano interface. A significant barrier to progress in this multidisciplinary area is the variability of published literature with regards to characterizations performed and experimental details reported. Here, we suggest a 'minimum information standard' for experimental literature investigating bio-nano interactions. This standard consists of specific components to be reported, divided into three categories: material characterization, biological characterization and details of experimental protocols. Our intention is for these proposed standards to improve reproducibility, increase quantitative comparisons of bio-nano materials, and facilitate meta analyses and in silico modelling.

Silver nanoparticles were grown in aqueous solution, without the presence of typical surfactant molecules, but under the presence of different proteins. The shape of the resulting silver nanoparticles could be tuned by the selection of the types of proteins. The amount of accessible lysine groups was found to be mainly responsible for the anisotropy in nanoparticle formation. Viability measurements of cells exposed to protein capped spherical or prism-shaped NPs did not reveal differences between both geometries. Thus, in the case of protein-only coated Ag NPs, no shape-induced toxicity was found under the investigated exposure conditions.

We describe the current difference in reporting the performance of nanotechnology diagnostic devices between technologists and clinicians. This perspective specifies the "metrics" used to evaluate these devices and describes strategies to bridge the gap between these two communities in order to accelerate the translation from academic bench to the clinic. We use two recently published ACS Nano articles to highlight the evaluation of silicon nanowire and surface-enhanced Raman spectroscopy-breath diagnostic tests for patients afflicted with cancer and asthma. These studies represent some of the earliest studies of emerging nanotechnology devices utilizing clinical parameters to assess performance.

Colloidal particles with fluorescence read-out are commonly used as sensors for the quantitative determination of ions. Calcium, for example, is a biologically highly relevant ion in signaling, and thus knowledge of its spatio-temporal distribution inside cells would offer important experimental data. However, the use of particle-based intracellular sensors for ion detection is not straightforward. Important associated problems involve delivery and intracellular location of particle-based fluorophores, crosstalk of the fluorescence read-out with pH, and spectral overlap of the emission spectra of different fluorophores. These potential problems are outlined and discussed here with selected experimental examples. Potential solutions are discussed and form a guideline for particle-based intracellular imaging of ions., (© 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Colloidal nanocrystals (NCs, i.e., crystalline nanoparticles) have become an important class of materials with great potential for applications ranging from medicine to electronic and optoelectronic devices. Today's strong research focus on NCs has been prompted by the tremendous progress in their synthesis. Impressively narrow size distributions of just a few percent, rational shape-engineering, compositional modulation, electronic doping, and tailored surface chemistries are now feasible for a broad range of inorganic compounds. The performance of inorganic NC-based photovoltaic and light-emitting devices has become competitive to other state-of-the-art materials. Semiconductor NCs hold unique promise for near- and mid-infrared technologies, where very few semiconductor materials are available. On a purely fundamental side, new insights into NC growth, chemical transformations, and self-organization can be gained from rapidly progressing in situ characterization and direct imaging techniques. New phenomena are constantly being discovered in the photophysics of NCs and in the electronic properties of NC solids. In this Nano Focus, we review the state of the art in research on colloidal NCs focusing on the most recent works published in the last 2 years.

Due to their ultra-small size, inorganic nanoparticles (NPs) have distinct properties compared to the bulk form. The unique characteristics of NPs are broadly exploited in biomedical sciences in order to develop various methods of targeted drug delivery, novel biosensors and new therapeutic pathways. However, relatively little is known in the negotiation of NPs with complex biological environments. Cell membranes (CMs) in eukaryotes have dynamic structures, which is a key property for cellular responses to NPs. In this review, we discuss the current knowledge of various interactions between advanced types of NPs and CMs., (Copyright © 2014 Elsevier Inc. All rights reserved.)

Colloidal nanoparticles (NPs) have become versatile building blocks in a wide variety of fields. Here, we discuss the state-of-the-art, current hot topics, and future directions based on the following aspects: narrow size-distribution NPs can exhibit protein-like properties; monodispersity of NPs is not always required; assembled NPs can exhibit collective behavior; NPs can be assembled one by one; there is more to be connected with NPs; NPs can be designed to be smart; surface-modified NPs can directly reach the cytosols of living cells.

A critical view of the current toxicological methods used in nanotechnology and their related techniques. Hereby, toxicological effects derived from the intracellular accumulation and uptake will be examined. Then advantages/disadvantages of these methods will be discussed. Additional analytical techniques necessary to implement the results will be reviewed.

A light-addressable gold electrode modified with CdS and FePt or with CdS@FePt nanoparticles via an interfacial dithiol linker layer is presented. XPS measurements reveal that trans-stilbenedithiol provides high-quality self-assembled monolayers compared to benzenedithiol and biphenyldithiol, in case they are formed at elevated temperatures. The CdS nanoparticles in good electrical contact with the electrode allow for current generation under illumination and appropriate polarization. FePt nanoparticles serve as catalytic sites for the reduction of hydrogen peroxide to water. Advantageously, both properties can be combined by the use of hybrid nanoparticles fixed on the electrode by means of the optimized stilbenedithiol layer. This allows a light-controlled analysis of different hydrogen peroxide concentrations.

We report on the successful dielectrophoretic trapping and electrical characterization of DNA-coated gold nanoparticles on vertical nanogap devices (VNDs). The nanogap devices with an electrode distance of 13 nm were fabricated from Silicon-on-Insulator (SOI) material using a combination of anisotropic reactive ion etching (RIE), selective wet chemical etching and metal thin-film deposition. Au nanoparticles (diameter 40 nm) coated with a monolayer of dithiolated 8 base pairs double stranded DNA were dielectrophoretically trapped into the nanogap from electrolyte buffer solution at MHz frequencies as verified by scanning and transmission electron microscopy (SEM/TEM) analysis. First electrical transport measurements through the formed DNA-Au-DNA junctions partially revealed an approximately linear current-voltage characteristic with resistance in the range of 2-4 GΩ when measured in solution. Our findings point to the importance of strong covalent bonding to the electrodes in order to observe DNA conductance, both in solution and in the dry state. We propose our setup for novel applications in biosensing, addressing the direct interaction of biomolecular species with DNA in aqueous electrolyte media.

Micrometer-sized polyelectrolyte capsules are synthesized, which have ion-sensitive fluorophores embedded in their cavities. As the membranes of the capsules are permeable to ions, the fluorescence of the capsules changed with the ion concentration. In particular, capsules sensitive to protons, sodium, potassium, and chloride ions are fabricated and their fluorescence response analyzed. In order to allow for ratiometric measurements, additional fluorophores whose emission do not depend on the ion concentration and which emit a different wavelength are co-embedded in the capsule cavities., (Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Colloidal nanoparticles are often stabilized by high surface charges. These create an electrical potential that may strongly affect the concentration of dissolved ions, which presents a formidable problem for the use of nanoparticles in ion-sensing applications. This effect is investigated systematically with organic fluorophore-gold nanoparticle hybrids, which have a chloride-sensitive fluorophore attached at varying distances from their surface. The distance-dependent fluorescence response is quantitatively assessed using fluorescence spectroscopy.

In this review we would like to aim at pharmaceuticals engineered on the nanoscale, i.e. pharmaceuticals where the nanomaterial plays the pivotal therapeutic role or adds additional functionality to the previous compound. Those cases would be considered as nanopharmaceuticals. The development of inorganic systems is opening the pharmaceutical nanotechnology novel horizons for diagnosis, imaging and therapy mainly because of their nanometer-size and their high surface area to volume ratios which allow for specific functions that are not possible in the micrometer-size particles. This review will focus on pharmaceutical forms that are based on inorganic nanoparticles where the nanosize of the inorganic component provides unique characteristics to the pharmaceutical form. Several examples of these systems that are either in pre-clinical investigation and under examination by the Food and Drug Administration (FDA) or that have been already approved by the FDA and are in clinical practice today like Gastromark, NanoTherm, Colloidal Gold for Lateral Flow tests, HfO-NPs, BioVant will be described and reviewed., (Copyright 2010 Elsevier Ltd. All rights reserved.)

Colloidal nanocrystal (NC) donors wrapped with a polymer coating including multiple organic acceptor molecules are promising scaffolds for fluorescence resonance energy transfer (FRET)-based nanobiosensors. Over other self-assembling donor-acceptor configurations, our preloaded polymers have the virtue of producing compact assemblies with a fixed donor/acceptor distance. This property, together with the possibility of stoichiometric polymer loading, allowed us to directly address how the FRET efficiency depended on the donor/acceptor. At the population level, nanoprobes based on commercial as well as custom CdSe/ZnS donors displayed the expected dose-dependent rise in transfer efficiency, saturating from about five ATTO dyes/NC. However, for a given acceptor concentration, both the intensity and lifetime of single-pair FRET data revealed a large dispersion of transfer efficiencies, highlighting an important heterogeneity among nominally identical FRET-based nanoprobes. Rigorous quality check during synthesis and shell assembly as well as postsynthesis sorting and purification are required to make hybrid semiconductor-organic nanoprobes a robust and viable alternative to organic or genetically encoded nanobiosensors.

Eu+++ and Tb+++ ions have been incorporated into nanodimensional yttrium oxide host matrices via a sol-gel process using Y5O(OPr(i))13 as precursor (OPr(i) = isopropoxy). The as-synthesized white powders have been annealed at different temperatures. Photoluminescence (PL) spectroscopy and X-ray diffraction (XRD) have been used as tools for documenting the characteristics of these powders. For Eu+++-doped powders, a comparison of the Eu+++, 5D0-->7F1, and 5D0-->7F2 peak intensities in the emission spectra reveals that the dopant ions are occupying unsymmetrical sites in the host yttrium oxide in all the samples. For Tb+++-doped powders, the characteristic terbium 5D3-->7Fn and 5D-->7Fn (n = 2-6) transitions were visible only in the samples that had been annealed above 500 degrees C. Samples of the doped particle powders were suspended in chloroform by fragmenting the powder with and without sonification under the presence of trioctylphosphine oxide, or a mixture of oleic acid and dioctyl ether. The resulting clear colorless (for Eu+++) and light green translucent (for Tb+++) solutions of the suspended particles showed red and green luminescence upon UV excitation, respectively. In addition, suspension in water has been achieved by fragmenting the powder in the presence of dichloroacetic acid. Transmission electron micrograph investigation of the soluble particles shows single dispersed particles along with agglomerates. The changes in the luminescence due to fragmentation of the particle powder and due the influence of the surfactant of the suspended colloidal particles are discussed.

Nanoparticles have properties that are useful for the diagnosis and treatment of cancer, including their size-dependent properties, stability in solvent, ideal size for delivery within the body, and tunable surface chemistry for targeted delivery. Several different nanoparticle building blocks possessing varied functionality can be assembled into one multifunctional composite nanoparticle, further expanding their potential use in cancer diagnostics and therapeutics. Here, we present several examples of the types of functional composite nanoparticles that have been studied, in addition to highlighted applications of their uses.

In traditional DNA melting assays, the temperature of the DNA-containing solution is slowly ramped up. In contrast, we use 300 ns laser pulses to rapidly heat DNA bound gold nanoparticle aggregates. We show that double-stranded DNA melts on a microsecond time scale that leads to a disintegration of the gold nanoparticle aggregates on a millisecond time scale. A perfectly matching and a point-mutated DNA sequence can be clearly distinguished in less than one millisecond even in a 1:1 mixture of both targets.

The diffusion properties of fluorescent colloidal CdSe and CdSe/ZnS nanocrystals (QDs) with different hydrophilic coatings were characterized in complex fluids such as actin solutions using fluorescence correlation spectroscopy (FCS). The hydrodynamic radii of the QDs were determined both in organic solvents and water. Attention was given to the potential artifacts arising from the fluorescence properties of the QDs. With increasing excitation intensities, the apparent particle concentration and diffusion times are overestimated if using a simple diffusion model. This can be explained by a numerical simulation. The diffusion behavior of QDs in actin networks of different concentrations was determined to demonstrate the potential use of nanocrystals as probes in soft biological matter. The decreasing diffusion coefficient of the nanocrystals with increasing actin concentration results in an intrinsic polymer viscosity of 0.12+/-0.02 ml mg(-1), in accordance with literature values.

PbSe nanocrystals with rock-salt structure are grown on the tips of colloidal CdS and CdSe nanorods. The facets of wurtzite rods provide a substrate with various degrees of reactivity for the growth of PbSe. The presence of dangling Cd bonds may explain subtle differences between nonequivalent facets resulting in the selective nucleation of PbSe only on one of the two tips of each CdS rod. This approach has the potential to facilitate the fabrication of heterostructures with tailored optical and electronic properties.

Biological applications of nanomaterials as delivery carriers have been embedded in traditional biomedical research for decades. Despite lagging behind, recent significant breakthroughs in the use of nanocarriers as tools for plant biotechnology have created great interest. In this Perspective, we review the outstanding recent works in nanocarrier-mediated plant transformation and its agricultural applications. We analyze the chemical and physical properties of nanocarriers determining their uptake efficiency and transport throughout the plant body.

Nanotoxicology and nanomedicine are two sub-disciplines of nanotechnology focusing on the phenomena, mechanisms, and engineering at the nano-bio interface. For the better part of the past three decades, these two disciplines have been largely developing independently of each other. Yet recent breakthroughs in microbiome research and the current COVID-19 pandemic demonstrate that holistic approaches are crucial for solving grand challenges in global health. Here we show the Yin and Yang relationship between the two fields by highlighting their shared goals of making safer nanomaterials, improved cellular and organism models, as well as advanced methodologies. We focus on the transferable knowledge between the two fields as nanotoxicological research is moving from pristine to functional nanomaterials, while inorganic nanomaterials - the main subjects of nanotoxicology - have become an emerging source for the development of nanomedicines. We call for a close partnership between the two fields in the new decade, to harness the full potential of nanotechnology for benefiting human health and environmental safety.

X-ray-based analytics are routinely applied in many fields, including physics, chemistry, materials science, and engineering. The full potential of such techniques in the life sciences and medicine, however, has not yet been fully exploited. We highlight current and upcoming advances in this direction. We describe different X-ray-based methodologies (including those performed at synchrotron light sources and X-ray free-electron lasers) and their potentials for application to investigate the nano-bio interface. The discussion is predominantly guided by asking how such methods could better help to understand and to improve nanoparticle-based drug delivery, though the concepts also apply to nano-bio interactions in general. We discuss current limitations and how they might be overcome, particularly for future use in vivo.

The design and use of materials in the nanoscale size range for addressing medical and health-related issues continues to receive increasing interest. Research in nanomedicine spans a multitude of areas, including drug delivery, vaccine development, antibacterial, diagnosis and imaging tools, wearable devices, implants, high-throughput screening platforms, etc. using biological, nonbiological, biomimetic, or hybrid materials. Many of these developments are starting to be translated into viable clinical products. Here, we provide an overview of recent developments in nanomedicine and highlight the current challenges and upcoming opportunities for the field and translation to the clinic.

Analytical nanoscience and nanotechnology (AN&N) is a clear trend in current analytical chemistry in which Prof. Valcárcel was working during his last research period. Prof. Valcárcel contributed decisively to the modernization of analytical chemistry, both in the claim of its foundations and basic principles and in its important applied facet and its role to problem solving. Graph With all this activity and these important milestones, Prof. Valcárcel lived with intensity and hyperactivity and with passion and enthusiasm that he transmitted to everyone around him. [Extracted from the article]

Background: While nanotechnology is advancing rapidly, nanosafety tends to lag behind since general mechanistic insights into cell-nanoparticle (NP) interactions remain rare. To tackle this issue, standardization of nanosafety assessment is imperative. In this regard, we believe that the cell type selection should not be overlooked since the applicability of cell lines could be questioned given their altered phenotype. Hence, we evaluated the impact of the cell type on in vitro nanosafety evaluations in a human and murine neuroblastoma cell line, neural progenitor cell line and in neural stem cells. Acute toxicity was evaluated for gold, silver and iron oxide (IO)NPs, and the latter were additionally subjected to a multiparametric analysis to assess sublethal effects. Results: The stem cells and murine neuroblastoma cell line respectively showed most and least acute cytotoxicity. Using high content imaging, we observed cell type- and species-specific responses to the IONPs on the level of reactive oxygen species production, calcium homeostasis, mitochondrial integrity and cell morphology, indicating that cellular homeostasis is impaired in distinct ways. Conclusions: Our data reveal cell type-specific toxicity profiles and demonstrate that a single cell line or toxicity end point will not provide sufficient information on in vitro nanosafety. We propose to identify a set of standard cell lines for screening purposes and to select cell types for detailed nanosafety studies based on the intended application and/or expected exposure. [ABSTRACT FROM AUTHOR]

In this Progress Report some recent trends and future perspectives towards the use of nanomaterials for smart food packaging and quality control of food are given. The examples and discussion are meant to illustrate the potential use of nanotechnology for food sustainability rather than to review the state of the art of nanomaterials in this area, which although expected to have a groundbreaking impact on food sustainability is still on an early stage. [ABSTRACT FROM AUTHOR]

In nanomedicine design, emphasis is centered on the engineered impacts of the nanomaterials (NMs). However, failure to understand the unintended effects of nanomaterials on the cell biology can affect the overall performance, approval, and adoption in the clinic. Much of these unintended effects arise from unique physico-chemical properties of the NMs. This feature article discusses some of the key physico-chemical parameters of NMs and highlights how they could cause unexpected and novel biological responses, with some insights into their underlying mechanisms. [ABSTRACT FROM AUTHOR]

Understanding the complex inter‐regulation of the innate physiochemical properties of nanomaterials and the biological milieu is critical to the exploitation of novel nanomaterials for biomedical applications. In the Review on page 5936, C. Y. Tay, D. T. Leong, and team discuss how important nanomaterial parameters such as size, shape, surface charge, as well as the nanomaterial‐associated protein corona can critically affect nano‐induced biological phenomena that may hold therapeutic value. [ABSTRACT FROM AUTHOR]

Nanoparticles modified with ligands for specific targeting towards receptors expressed on the surface of target cells are discussed in literature towards improved delivery strategies. In such concepts the ligand density on the surface of the nanoparticles plays an important role. How many ligands per nanoparticle are best for the most efficient delivery? Importantly, this number may be different for in vitro and in vivo scenarios. In this review first viruses as "biological" nanoparticles are analyzed towards their ligand density, which is then compared to the ligand density of engineered nanoparticles. Then, experiments are reviewed in which in vitro and in vivo nanoparticle delivery has been analyzed in terms of ligand density. These results help to understand which ligand densities should be attempted for better targeting. Finally synthetic methods for controlling the ligand density of nanoparticles are described. Unlabelled Image [ABSTRACT FROM AUTHOR]

A simple, reliable, and cost-effective experiment is presented in which students synthesized citrate-capped gold nanoparticles (GNPs), functionalized them with poly(ethylene glycol) (PEG), and transferred the PEG-GNPs from water to the organic phase dichloromethane. The experiment introduces students to nanotechnology with foci on important concepts including surface modification of nanoparticles, colloidal stability, and phase transfer. The proposed experiment was evaluated at three different universities to confirm its reproducibility and versatility. Collectively, the proposed experiment is suitable to be implemented into colloid- or nanoscience-related curricula. [ABSTRACT FROM AUTHOR]

The use of nanotechnologies involving nano- and microparticles has increased tremendously in the recent past. There are various beneficial characteristics that make particles attractive for a wide range of technologies. However, colloidal particles on the other hand can potentially be harmful for humans and environment. Today, complete understanding of the interaction of colloidal particles with biological systems still remains a challenge. Indeed, their uptake, effects, and final cell cycle including their life span fate and degradation in biological systems are not fully understood. This is mainly due to the complexity of multiple parameters which need to be taken in consideration to perform the nanosafety research. Therefore, we will provide an overview of the common denominators and ideas to achieve universal metrics to assess their safety. The review discusses aspects including how biological media could change the physicochemical properties of colloids, how colloids are endocytosed by cells, how to distinguish between internalized versus membrane-attached colloids, possible correlation of cellular uptake of colloids with their physicochemical properties, and how the colloidal stability of colloids may vary upon cell internalization. In conclusion three main statements are given. First, in typically exposure scenarios only part of the colloids associated with cells are internalized while a significant part remain outside cells attached to their membrane. For quantitative uptake studies false positive counts in the form of only adherent but not internalized colloids have to be avoided. pH sensitive fluorophores attached to the colloids, which can discriminate between acidic endosomal/lysosomal and neutral extracellular environment around colloids offer a possible solution. Second, the metrics selected for uptake studies is of utmost importance. Counting the internalized colloids by number or by volume may lead to significantly different results. Third, colloids may change their physicochemical properties along their life cycle, and appropriate characterization is required during the different stages. [ABSTRACT FROM AUTHOR]