Search

ConspectusThe modern healthcare system faces an unrelenting threat from microorganisms, as evidenced by global outbreaks of new viral diseases, emerging antimicrobial resistance, and the rising incidence of healthcare-associated infections (HAIs). An effective response to these threats requires rapid and accurate diagnostic tests that can identify causative pathogens at the point of care (POC). Such tests could eliminate diagnostic uncertainties, facilitating patient triaging, minimizing the empiric use of antimicrobial drugs, and enabling targeted treatments. Current standard methods, however, often fail to meet the needs of rapid diagnosis in POC settings. Culture-based assays entail long processing times and require specialized laboratory infrastructure; nucleic acid (NA) tests are often limited to centralized hospitals due to assay complexity and high costs. Here we discuss two new POC tests developed in our groups to enable the rapid diagnosis of infection. The first is nanoPCR that takes advantages of core-shell magnetoplasmonic nanoparticles (MPNs): (i) Au shell significantly accelerates thermocycling via volumetric, plasmonic light-to-heat conversion and (ii) a magnetic core enables sensitive in situ fluorescent detection via magnetic clearing. By adopting a Ferris wheel module, the system expedites multisamples in parallel with a minimal setup. When applied to COVID-19 diagnosis, nanoPCR detected SARS-CoV-2 RNA down to 3.2 copy/μL within 17 min. In particular, nanoPCR diagnostics accurately identified COVID-19 cases in clinical samples (n = 150), validating its clinical applicability. The second is a polarization anisotropy diagnostic (PAD) system that exploits the principle of fluorescence polarization (FP) as a detection modality. Fluorescent probes were designed to alter their molecular weight upon recognizing target NAs. This event modulates the probes' tumbling rate (Brownian motion), which leads to changes in FP. The approach is robust against environmental noise and benefits from the ratiometric nature of the signal readout. We applied PAD to detect clinically relevant HAI bacteria (Escherichia coli, Klebsiella pneumoniae, Acinetobacter baumannii, Pseudomonas aeruginosa, and Staphylococcus aureus). The PAD assay demonstrated detection sensitivity down to the single bacterium level and determined both drug resistance and virulence status. In summary, these new tests have the potential to become powerful tools for rapid diagnosis in the infectious disease space. They do not require highly skilled personnel or labor-intensive analyses, and the assays are quick and cost-effective. These attributes will make nanoPCR and PAD well-aligned with a POC workflow to aid physicians to initiate prompt and informed patient treatment.

Nanoparticles with multifunctionality and high colloidal stability are essential for biomedical applications. However, their use is often hindered by the formation of thick coating shells and/or nanoparticle agglomeration. Herein, we report a single nanoparticle coating strategy to form 1 nm polymeric shells with a variety of chemical functional groups and surface charges. Under exposure to alternating magnetic field, nanosecond thermal energy pulses trigger a polymerization in the region only a few nanometers from the magnetic nanoparticle (MNP) surface. Modular coatings containing functional groups, according to the respective choice of monomers, are possible. In addition, the surface charge can be tuned from negative through neutral to positive. We adopted a coating method for use in biomedical targeting studies where obtaining compact nanoparticles with the desired surface charge is critical. A single MNP with a zwitterionic charge can provide excellent colloidal stability and cell-specific targeting.

Multifunctional magnetic nanoparticles have shown great promise as next-generation imaging and perturbation probes for deciphering molecular and cellular processes. As a consequence of multicomponent integration into a single nanosystem, pre-existing nanoprobes are typically large and show limited access to biological targets present in a crowded microenvironment. Here, we apply organic-phase surface PEGylation, click chemistry, and charge-based valency discrimination principles to develop compact, modular, and monovalent magnetofluorescent nanoparticles (MFNs). We show that MFNs exhibit highly efficient labeling to target receptors present in cells with a dense and thick glycocalyx layer. We use these MFNs to interrogate the E-cadherin-mediated adherens junction formation and F-actin polymerization in a three-dimensional space, demonstrating the utility as modular and versatile mechanogenetic probes in the most demanding single-cell perturbation applications.

Scanning probe microscopy techniques, such as atomic force microscopy and scanning tunnelling microscopy, are harnessed to image nanoscale structures with an exquisite resolution, which has been of significant value in a variety of areas of nanotechnology. These scanning probe techniques, however, are not generally suitable for high-throughput imaging, which has, from the outset, been a primary challenge. Traditional approaches to increasing the scalability have involved developing multiple probes for imaging, but complex probe design and electronics are required to carry out the detection method. Here, we report a probe-based imaging method that utilizes scalable cantilever-free elastomeric probe design and hierarchical measurement architecture, which readily reconstructs high-resolution and high-throughput topography images. In a single scan, we demonstrate imaging with a 100-tip array to obtain 100 images over a 1-mm2 area with 106 pixels in less than 10 min. The potential for large-scale tip integration and the advantage of a simple probe array suggest substantial promise for our approach to high-throughput imaging far beyond what is currently possible.

ConspectusInorganic nanocrystal design has been continuously evolving with a better understanding of the chemical reaction mechanisms between chemical stimuli and nanocrystals. Under certain conditions, molecular compounds can be effective as chemical stimuli to induce transformative reactions of nanocrystals toward new materials that would differ in geometric shape, composition, and crystallographic structure. To explore such evolutionary processes, two-dimensional (2D) layered transition-metal chalcogenide (TMC) nanostructures are an interesting structural platform because they not only exhibit unique transformation pathways due to their structural anisotropy but also present new opportunities for improved material properties for potential applications such as catalysis and energy conversion and storage. The high surface area/volume ratio, interlayer van der Waals (vdW) spacing, and different coordination states between the unsaturated edges and the fully saturated basal planes of the chalcogens are characteristic of 2D layered TMC nanostructures, which subsequently lead to anisotropic chemical processes during chemical transformations, such as regioselective reactions at the interfacial boundaries in the pathways for either porous or solid heteronanostructures. In this Account, we first discuss the chemical reactivity of 2D layered TMC nanostructures. By categorizing the external stimuli in terms of chemical principles, such as Lewis acid-base chemistry, a desirable regioselective chemical reaction can occur with controlled reactivity. In association with the knowledge obtained from the nanoscale chemical reactivity of 2D layered nanocrystals, similar efforts in other important morphologies such as 1D and isotropic 0D nanocrystals are introduced. For instance, for 1D and 0D metal oxide nanocrystals, the effects of molecular stimuli on the atomic-level changes in the crystal lattice are demonstrated, eventually leading to a variety of shape transformations.

Because of the absence of native dangling bonds on the surface of the layered transition metal dichalcogenides (TMDCs), the surface of colloidal quantum dots (QDs) of TMDCs is exposed directly to the solvent environment. Therefore, the optical and electronic properties of TMDCS QDs are expected to have stronger influence from the solvent than usual surface-passivated QDs due to more direct solvent-QD interaction. Study of such solvent effect has been difficult in colloidal QDs of TMDC due to the large spectroscopic heterogeneity resulting from the heterogeneity of the lateral size or (and) thickness in ensemble. Here, we developed a new synthesis procedure producing the highly uniform colloidal monolayer WS2 QDs exhibiting well-defined photoluminescence (PL) spectrum free from ensemble heterogeneity. Using these newly synthesized monolayer WS2 QDs, we observed the strong influence of the aromatic solvents on the PL energy and intensity of monolayer WS2 QD beyond the simple dielectric screening effect, whi...

Magnetic nanoparticle (MNP)-mediated heating systems have emerged as an effective strategy for the fine control of biological systems from hyperthermia to cell signaling in a spatiotemporally controlled fashion. To achieve satisfactory performance, advanced design concepts have been developed to tailor the magnetism that directly affects the heating properties of nanoparticles. In this review, we focus on recent advances in magnetism-engineered nanoparticles. Fundamental principles of magnetic heating mechanisms and related key magnetic parameters are discussed first to provide instructive guidelines for the design of MNPs with enhanced heating efficiency. Then, we highlight recent progress in MNPs for optimized heat generation with unique design approaches to control magnetism. Finally, we discuss highly effective biomedical application studies such as dual-mode magnetic hyperthermia, magnetothermally triggered drug delivery, and the magnetothermal control of cellular activities.

Developing innovative tools that facilitate the understanding of sophisticated biological systems has been one of the Holy Grails in the physical and biological sciences. In this Commentary, we discuss recent advances, opportunities, and challenges in the use of nanomaterials as a precision tool for biology and medicine.

Recent suggestions of nanoscale heat confinement on the surface of synthetic and biogenic magnetic nanoparticles during heating by radio frequency-alternating magnetic fields have generated intense interest because of the potential utility of this phenomenon for noninvasive control of biomolecular and cellular function. However, such confinement would represent a significant departure from the classical heat transfer theory. Here, we report an experimental investigation of nanoscale heat confinement on the surface of several types of iron oxide nanoparticles commonly used in biological research, using an all-optical method devoid of the potential artifacts present in previous studies. By simultaneously measuring the fluorescence of distinct thermochromic dyes attached to the particle surface or dissolved in the surrounding fluid during radio frequency magnetic stimulation, we found no measurable difference between the nanoparticle surface temperature and that of the surrounding fluid for three distinct nanoparticle types. Furthermore, the metalloprotein ferritin produced no temperature increase on the protein surface nor in the surrounding fluid. Experiments mimicking the designs of previous studies revealed potential sources of the artifacts. These findings inform the use of magnetic nanoparticle hyperthermia in engineered cellular and molecular systems.

Magnetic nanoparticles have been extensively explored as a versatile platform for magnetic resonance imaging (MRI) contrast agents due to their strong contrast enhancement effects together with the platform capability for multiple imaging modalities. In this tutorial review, we focus on recent progress in the use of magnetic nanoparticles for MRI contrast agents and multi-mode imaging agents such as T1-T2 MRI, MRI-optical, and MRI-radioisotopes. This review also highlights emerging magnetic imaging techniques such as magnetic particle imaging (MPI), magneto-motive ultrasound imaging (MMUS), and magneto-photoacoustic imaging (MPA).

Bulk magnetite (Fe3O4), the loadstone used in magnetic compasses, has been known to exhibit magnetoelectric (ME) properties below ~10 K; however, corresponding ME effects in Fe3O4 nanoparticles have been enigmatic. We investigate quantitatively the ME coupling of spherical Fe3O4 nanoparticles with uniform diameters (d) from 3 to 15 nm embedded in an insulating host, using a sensitive ME susceptometer. The intrinsic ME susceptibility (MES) of the Fe3O4 nanoparticles is measured, exhibiting a maximum value of ~0.6 ps/m at 5 K for d=15 nm. We found that the MES is reduced with reduced d but remains finite until d=~5 nm, which is close to the critical thickness for observing the Verwey transition. Moreover, with reduced diameter, the critical temperature below which the MES becomes conspicuous increased systematically from 9.8 K in the bulk to 19.7 K in the nanoparticles with d=7 nm, reflecting the core-shell effect on the ME properties. These results point to a new pathway for investigating ME effect in various nanomaterials., 19 pages, 4 figures

Spatiotemporal interrogation of signal transduction at the single-cell level is necessary to answer a host of important biological questions. This protocol describes a nanotechnology-based single-cell and single-molecule perturbation tool, termed mechanogenetics, that enables precise spatial and mechanical control over genetically encoded cell-surface receptors in live cells. The key components of this tool are a magnetoplasmonic nanoparticle (MPN) actuator that delivers defined spatial and mechanical cues to receptors through target-specific one-to-one engagement and a micromagnetic tweezers (μMT) that remotely controls the magnitude of force exerted on a single MPN. In our approach, a SNAP-tagged cell-surface receptor of interest is conjugated with a single-stranded DNA oligonucleotide, which hybridizes to its complementary oligonucleotide on the MPN. This protocol consists of four major stages: (i) chemical synthesis of MPNs, (ii) conjugation with DNA and purification of monovalent MPNs, (iii) modular targeting of MPNs to cell-surface receptors, and (iv) control of spatial and mechanical properties of targeted mechanosensitive receptors in live cells by adjusting the μMT-to-MPN distance. Using benzylguanine (BG)-functionalized MPNs and model cell lines expressing either SNAP-tagged Notch or vascular endothelial cadherin (VE-cadherin), we provide stepwise instructions for mechanogenetic control of receptor clustering and for mechanical receptor activation. The ability of this method to differentially control spatial and mechanical inputs to targeted receptors makes it particularly useful for interrogating the differential contributions of each individual cue to cell signaling. The entire procedure takes up to 1 week.

Tools capable of imaging and perturbing mechanical signaling pathways with fine spatiotemporal resolution have been elusive, despite their importance in diverse cellular processes. The challenge in developing a mechanogenetic toolkit (i.e., selective and quantitative activation of genetically encoded mechanoreceptors) stems from the fact that many mechanically activated processes are localized in space and time yet additionally require mechanical loading to become activated. To address this challenge, we synthesized magnetoplasmonic nanoparticles that can image, localize, and mechanically load targeted proteins with high spatiotemporal resolution. We demonstrate their utility by investigating the cell-surface activation of two mechanoreceptors: Notch and E-cadherin. By measuring cellular responses to a spectrum of spatial, chemical, temporal, and mechanical inputs at the single-molecule and single-cell levels, we reveal how spatial segregation and mechanical force cooperate to direct receptor activation dynamics. This generalizable technique can be used to control and understand diverse mechanosensitive processes in cell signaling. VIDEO ABSTRACT.

© 2017 The Royal Society of Chemistry. Magnetic nanoparticles (MNPs) are widely used in biomedical and clinical applications, including medical imaging, therapeutics, and biological sample processing. Rapid characterization of MNPs, notably their magnetic moments, should facilitate optimization of particle synthesis and accelerate assay development. Here, we report a compact and low-cost magnetometer for fast, on-site MNP characterization. Termed integrated microHall magnetometer (iHM), our device was fabricated using standard semiconductor processes: an array of Hall sensors, transistor switches, and amplifiers were integrated into a single chip, thus improving the detection sensitivity and facilitating chip operation. By applying the iHM, we demonstrate versatile magnetic assays. We measured the magnetic susceptibility and moments of MNPs using small sample amounts (∼10 pL), identified different MNP compositions in mixtures, and detected MNP-labeled single cells.

Nanoparticle clusters (NPCs) have attracted significant interest owing to their unique characteristics arising from their collective individual properties. Nonetheless, the construction of NPCs in a structurally well-defined and size-controllable manner remains a challenge. Here we demonstrate a strategy to construct size-controlled NPCs using the DNA-binding zinc finger (ZnF) protein. Biotinylated ZnF was conjugated to DNA templates with different lengths, followed by incubation with neutravidin-conjugated nanoparticles. The sequence specificity of ZnF and programmable DNA templates enabled a size-controlled construction of NPCs, resulting in a homogeneous size distribution. We demonstrated the utility of magnetic NPCs by showing a three-fold increase in the spin-spin relaxivity in MRI compared with Feridex. Furthermore, folate-conjugated magnetic NPCs exhibited a specific targeting ability for HeLa cells. The present approach can be applicable to other nanoparticles, finding wide applications in many areas such as disease diagnosis, imaging, and delivery of drugs and genes.

A solution-phase synthetic protocol to form two-dimensional (2D) single-layer transition-metal chalcogenides (TMCs) has long been sought; however, such efforts have been plagued with the spontaneous formation of multilayer sheets. In this study, we discovered a solution-phase synthetic protocol, called "diluted chalcogen continuous influx (DCCI)", where controlling the chalcogen source influx (e.g., H2S) during its reaction with the transition-metal halide precursor is the critical parameter for the formation of single-layer sheets as examined for the cases of group IV TMCs. The continuous influx of dilute H2S throughout the entire growth period is necessary for large sheet formation through the exclusive a- and b-axial growth processes. By contrast, the burst influx of highly concentrated H2S in the early stages of the growth process forms multilayer TMC nanodiscs. Our DCCI protocol is a new synthetic concept for single-layer TMCs and, in principle, can be operative for wide range of TMC nanosheets.

Capturing tumor cells has attracted the attention because such cells can be used for diagnosing the occurrence and progression of cancers. Here we present a simple and efficient capturing of tumor cells using anti-EGFR antibody-conjugated magnetic nanoparticles. EGFR is a well-established epithelial cancer-specific marker that is over-expressed in many types of tumor cells. The conjugation of an anti-EGFR antibody with magnetic nanoparticles through a PEG-linker was shown to be highly efficient for preventing the non-specific binding of cells and improving the stability of the resulting nanoparticles even at a high salt concentration. The use of EGFR-targetable nanoparticles resulted in about 57% capture efficiency in 20 min for two cancer cell lines, PC9 (lung cancer) and HeLa (cervical cancer). The survival rate of the captured cells was approximately 85%, and most of the cells were retrievable, providing options for a further analysis of captured cells such as a mutational investigation of EGFR-related cancers. The present approach can be used for capturing circulating tumor cells (CTCs) expressing EGFR and the subsequent diagnostic analysis of the captured cells.

Colloidal 2-D layered transition metal dichalcogenide (TMDC) nanodiscs synthesized with uniform diameter and thickness can readily form the vertically stacked assemblies of particles in solution due to strong interparticle cohesive energy. The interparticle electronic coupling that modifies their optical and electronic properties poses a significant challenge in exploring their unique properties influenced by the anisotropic quantum confinement in different directions taking advantage of the controlled diameter and thickness. Here, we show that the assemblies of 2-D layered TiS2 nanodiscs are efficiently separated into individual nanodiscs via photoexcitation of the charge carriers by pulsed laser light, enabling the characterization of the properties of noninteracting TiS2 nanodiscs. Photoinduced separation of the nanodiscs is considered to occur via transient weakening of the interparticle cohesive force by the dense photoexcited charge carriers, which facilitates the solvation of each nanodisc by the s...

One of the holy grails in biomedical imaging technology is to achieve accurate imaging of biological targets. The development of sophisticated instrumentation and the use of contrast agents have improved the accuracy of biomedical imaging. However, the issue of false imaging remains a problem. Here, we developed a dual-mode artifact filtering nanoparticle imaging agent (AFIA) that comprises a combination of paramagnetic and superparamagnetic nanomaterials. This AFIA has the ability to perform “AND logic gate” algorithm to eliminate false errors (artifacts) from the raw images to enhance accuracy of the MRI. We confirm the artifact filtering capability of AFIA in MRI phantoms and further demonstrate that artifact-free imaging of stem cell migration is possible in vivo.

Auditory and vestibular hair cell bundles exhibit active mechanical oscillations at natural frequencies that are typically lower than the detection range of the corresponding end organs. We explore how these noisy nonlinear oscillators mode-lock to frequencies higher than their internal clocks. A nanomagnetic technique is used to stimulate the bundles without an imposed mechanical load. The evoked response shows regimes of high-order mode-locking. Exploring a broad range of stimulus frequencies and intensities, we observe regions of high-order synchronization, analogous to Arnold Tongues in dynamical systems literature. Significant areas of overlap occur between synchronization regimes, with the bundle intermittently flickering between different winding numbers. We demonstrate how an ensemble of these noisy spontaneous oscillators could be entrained to efficiently detect signals significantly above the characteristic frequencies of the individual cells.

Various bio-medical applications of magnetic nanoparticles have been explored during the past few decades. As tools that hold great potential for advancing biological sciences, magnetic nanoparticles have been used as platform materials for enhanced magnetic resonance imaging (MRI) agents, biological separation and magnetic drug delivery systems, and magnetic hyperthermia treatment. Furthermore, approaches that integrate various imaging and bioactive moieties have been used in the design of multi-modality systems, which possess synergistically enhanced properties such as better imaging resolution and sensitivity, molecular recognition capabilities, stimulus responsive drug delivery with on-demand control, and spatio-temporally controlled cell signal activation. Below, recent studies that focus on the design and synthesis of multi-mode magnetic nanoparticles will be briefly reviewed and their potential applications in the imaging and therapy areas will be also discussed.

The intrinsic nature of small-molecule chemotherapeutics, including i) limited aqueous solubility, ii) systemic toxicity due to non-specific whole-body distribution, and iii) potential development of drug resistance after initial administration, compromises their treatment efficacy.[1] Recently, nanoparticle (NP)-based drug delivery systems have been considered as promising alternatives to overcome some of these limitations and begin to resolve obstacles in the disease management in clinical oncology.[2] The intraparticular space of a NP vector can be employed to package drug payloads without constrain associated with their solubility. Further, NP vectors exhibit enhanced permeability and retention (EPR) effects[3] that facilitate the differential uptake, leading to preferential spatio-distribution in tumor.[4] However, conventional NP drug delivery systems tend to passively release drug payloads, limiting the ability to release an effective drug concentration at a desired time window. Therefore, there is a need to develop next-generation NP drug delivery system such as a stimuli-responsive drug release system with a goal of achieving spatio-temporal control, by which an acute level of drug concentration can be delivered at the time point the NP vectors reach maximum tumor accumulation.[5] By doing so, it is expected to dramatically improve therapeutic effects in tumor and effectively reduce systematic toxicity at a minute drug dosage.[6]

Two-dimensional (2D) layered nanostructures are emerging fast due to their exceptional materials properties. While the importance of physical approaches (e.g., guest intercalation and exfoliation) of 2D layered nanomaterials has been recognized, an understanding of basic chemical reactions of these materials, especially in nanoscale regime, is obscure. Here, we show how chemical stimuli can influence the fate of reaction pathways of 2D layered nanocrystals. Depending on the chemical characteristics (Lewis acid ((1)O2) or base (H2O)) of external stimuli, TiS2 nanocrystal is respectively transformed to either a TiO2 nanodisc through a "compositional metathesis" or a TiO2 toroid through multistage "edge-selective structural transformation" processes. These chemical reactions can serve as the new design concept for functional 2D layered nanostructures. For example, TiS2(disc)-TiO2(shell) nanocrystal constitutes a high performance type II heterojunction which not only a wide range solar energy coverage (~80%) with near-infrared absorption edge, but also possesses enhanced electron transfer property.

Sound perception via mechano-sensation is a remarkably sensitive and fast transmission process, converting sound as a mechanical input to neural signals in a living organism. Although knowledge of auditory hair cell functions has advanced over the past decades, challenges remain in understanding their biomechanics, partly because of their biophysical complexity and the lack of appropriate probing tools. Most current studies of hair cells have been conducted in a relatively low-frequency range (1000 Hz); therefore, fast kinetic study of hair cells has been difficult, even though mammalians have sound perception of 20 kHz or higher. Here, we demonstrate that the magnetic force nanoprobe (MFN) has superb spatiotemporal capabilities to mechanically stimulate spatially-targeted individual hair cells with a temporal resolution of up to 9 μs, which is equivalent to approximately 50 kHz; therefore, it is possible to investigate avian hair cell biomechanics at different tonotopic regions of the cochlea covering a full hearing frequency range of 50 to 5000 Hz. We found that the variation of the stimulation frequency and amplitude of hair bundles creates distinct mechanical responsive features along the tonotopic axis, where the kinetics of the hair bundle recovery motion exhibits unique frequency-dependent characteristics: basal, middle, and apical hair bundles can effectively respond at their respective ranges of frequency. We revealed that such recovery kinetics possesses two different time constants that are closely related to the passive and active motilities of hair cells. The use of MFN is critical for the kinetics study of free-standing hair cells in a spatiotemporally distinct tonotopic organization.

Nanoscale distance-dependent phenomena, such as Forster resonance energy transfer, are important interactions for use in sensing and imaging, but their versatility for bioimaging can be limited by undesirable photon interactions with the surrounding biological matrix, especially in in vivo systems. Here, we report a new type of magnetism-based nanoscale distance-dependent phenomenon that can quantitatively and reversibly sense and image intra-/intermolecular interactions of biologically important targets. We introduce distance-dependent magnetic resonance tuning (MRET), which occurs between a paramagnetic 'enhancer' and a superparamagnetic 'quencher', where the T1 magnetic resonance imaging (MRI) signal is tuned ON or OFF depending on the separation distance between the quencher and the enhancer. With MRET, we demonstrate the principle of an MRI-based ruler for nanometre-scale distance measurement and the successful detection of both molecular interactions (for example, cleavage, binding, folding and unfolding) and biological targets in in vitro and in vivo systems. MRET can serve as a novel sensing principle to augment the exploration of a wide range of biological systems.

Temperature control is an important method of self-defense in biological systems. For example, one response mounted by humans in an effort to fight injury, including viral and bacterial infections, involves an increase in body temperature, thus producing the well-recognized symptoms of fever.[1] Today, the idea of using artificial temperature control for disease removal is being realized with the aid of various techniques, such as ultrasound, near-infrared light, and magnetic field by increasing localized temperature in a targeted region.[2] Magnetic nanoparticles have attracted considerable attention for hyperthermia applications owing to their ability to generate heat effectively when exposed to an alternating magnetic field without a penetration depth limit.[3] Hyperthermia, the artificially induced heat treatment of a disease, uses temperatures ranging between 42 °C and 47°C. Generally, a temperature below 45 °C induces apoptotic cell death.[4] As compared to necrosis, apoptosis is a more benign form of “programmed” cell death.[5] Nonliving cells produced as the result of apoptotic process are cleaned by phagocytosis without affecting neighboring normal cells. In contrast, necrosis, typically generated by harsh and high-temperature hyperthermia, is considered relatively harmful because it can be correlated with inflammatory disease and metastasis.[6] However, achieving effective apoptotic hyperthermia is often difficult, as cells typically acquire resistance to induced thermal stress.[7] Repeated exposures to high temperatures with high concentration of magnetic nanoparticles are usually necessary to achieve a useful level of therapeutic efficacy even though the conditions could favor necrotic cell death rather than apoptosis. Because cancer cells are susceptible to heat at about 43 °C, while most normal tissues remain undamaged,[8] hyperthermia using this temperature defines a recognized but unmet goal.

While interesting and unprecedented material characteristics of two dimensionality (2-D) layered nanomaterials are emerging, their reliable synthetic methodologies are not well developed. In this study we demonstrate general applicability of synthetic protocols to a wide range of colloidal 2-D layered transition-metal chalcogenide (TMC) nanocrystals. As distinctly different from other nanocrystals, we discovered that 2-D layered TMC nanocrystals are unstable in the presence of reactive radicals from elemental chalcogen during the crystal formation. We first introduce the synthesis of titanium sulfide and selenide where well-defined single crystallinity and lateral size controllability are verified, and then such synthetic protocols are extended to all of group IV and V transition-metal sulfide (TiS(2), ZrS(2), HfS(2), VS(2), NbS(2), and TaS(2)) and selenide (TiSe(2), ZrSe(3), HfSe(3), VSe(2), NbSe(2), and TaSe(2)) nanocrystals. The use of appropriate chalcogen source is found to be critical for the successful synthesis of 2-D layered TMC nanocrystals. CS(2) is an efficient chalcogen precursor for metal sulfide nanocrystals, whereas elemental Se is appropriate for metal selenide nanocrystals. We briefly discuss the effects of reactive radical characteristics of elemental S and Se on the formation of 2-D layered TMC nanocrystals.

The regulation of cellular activities in a controlled manner is one of the most challenging issues in fields ranging from cell biology to biomedicine. Nanoparticles have the potential of becoming useful tools for controlling cell signalling pathways in a space and time selective fashion. Here, we have developed magnetic nanoparticles that turn on apoptosis cell signalling by using a magnetic field in a remote and non-invasive manner. The magnetic switch consists of zinc-doped iron oxide magnetic nanoparticles (Zn(0.4)Fe(2.6)O(4)), conjugated with a targeting antibody for death receptor 4 (DR4) of DLD-1 colon cancer cells. The magnetic switch, in its On mode when a magnetic field is applied to aggregate magnetic nanoparticle-bound DR4s, promotes apoptosis signalling pathways. We have also demonstrated that the magnetic switch is operable at the micrometre scale and that it can be applied in an in vivo system where apoptotic morphological changes of zebrafish are successfully induced.

Regioselective chemical reactions and structural transformations of two-dimensional (2D) layered transition-metal chalcogenide (TMC) nanocrystals are described. Upon exposure of 2D TiS(2) nanodiscs to a chemical stimulus, such as Cu ion, selective chemical reaction begins to occur at the peripheral edges. This edge reaction is followed by ion diffusion, which is facilitated by interlayer nanochannels and leads to the formation of a heteroepitaxial TiS(2)-Cu(2)S intermediate. These processes eventually result in the generation of a single-crystalline, double-convex toroidal Cu(2)S nanostructure. Such 2D regioselective chemical reactions also take place when other ionic reactants are used. The observations made and chemical principles uncovered in this effort indicate that a general approach exists for building various toroidal nanocrystals of substances such as Ag(2)S, MnS, and CdS.

The conversion of electromagnetic energy into heat by nanoparticles has the potential to be a powerful, non-invasive technique for biotechnology applications such as drug release, disease treatment and remote control of single cell functions, but poor conversion efficiencies have hindered practical applications so far. In this Letter, we demonstrate a significant increase in the efficiency of magnetic thermal induction by nanoparticles. We take advantage of the exchange coupling between a magnetically hard core and magnetically soft shell to tune the magnetic properties of the nanoparticle and maximize the specific loss power, which is a gauge of the conversion efficiency. The optimized core-shell magnetic nanoparticles have specific loss power values that are an order of magnitude larger than conventional iron-oxide nanoparticles. We also perform an antitumour study in mice, and find that the therapeutic efficacy of these nanoparticles is superior to that of a common anticancer drug.

Nowadays, attempts to use nanoparticles for medical applications are on the rise. However, the effect of nanoparticles in the body has not been clarified. In this study, we aimed to examine the pharmacokinetics of magnetized nanoparticles. FITC conjugated SA-MnMEIO nanoparticles were prepared for the purpose of tracing. Nanoparticles (15 nm diameter) were injected into the tail vein of BALB/c mice at a dose of 20 mg (Mn+Fe)/kg. A mouse was housed in a metabolic cage and sacrificed serially up to 14 days for the sampling of blood and tissues from various organs (i.e., heart, kidney, liver, and spleen). The concentration of nanoparticles was measured by detecting FITC using spectrofluorophotometer. Nanoparticles showed a half-life of 8.20 h. The fluorescence intensities of nanoparticles in tissues showed different time-dependent patterns among different organs. In the heart and the liver, the fluorescence intensities increased up to 2 weeks of observation, while those in the kidney and the spleen decreased. The results indicate that nanoparticles have unique pharmacokinetic characteristics and suggest that pharmacokinetic study is essential for the development of new nanoparticles for medical use.

Recently a memristor ( Chua, L. O. IEEE Trans. Circuit Theory 1971 , 18 , 507 ), the fourth fundamental passive circuit element, has been demonstrated as thin film device operations ( Strukov, D. B.; Snider, G. S.; Stewart, D. R.; Williams, R. S. Nature (London) 2008 , 453 , 80 ; Yang, J. J.; Pickett. M. D.; Li, X.; Ohlberg, D. A. A.; Stewart, D. R.; Williams, R. S. Nat. Nanotechnol. 2008 , 3 , 429 ). A new addition to the memristor family can be nanoparticle assemblies consisting of an infinite number of monodispersed, crystalline magnetite (Fe(3)O(4)) particles. Assembly of nanoparticles that have sizes below 10 nm, exhibits at room temperature a voltage-current hysteresis with an abrupt and large bipolar resistance switching (R(OFF)/R(ON) approximately 20). Interestingly, observed behavior could be interpreted by adopting an extended memristor model that combines both a time-dependent resistance and a time-dependent capacitance. We also observed that such behavior is not restricted to magnetites; it is a general property of nanoparticle assemblies as it was consistently observed in different types of spinel structured nanoparticles with different sizes and compositions. Further investigation into this new nanoassembly system will be of importance to the realization of the next generation nanodevices with potential advantages of simpler and inexpensive device fabrications.

Two-dimensional (2D) layered nanostructures have received increasing interest due to their unique nanoscale phenomena and their potential applications ranging from electronics and energy to catalysis. Recent investigation has revealed that laterally confined layered nanocrystals (LCLN) have remarkably enhanced electrochemical properties compared to their bulk counterparts owing to nanoscale characteristics that include large surface areas, finite lateral sizes, and enhanced open-edge morphologies. Among the variety of layered materials that have been described, tin sulfides are of particular interest because of their unique structural properties. SnS2 has a layered CdI2-type structure, composed of tin atoms sandwiched between two layers of hexagonally disposed closepacked sulfur atoms. The 2D layered characteristics of this substance are revealed in alkali metal intercalation phenomena, and by investigating anisotropy of properties such as electric and photoelectric conductivity. Owing to their large theoretical capacities for battery applications, bulk or micron sized tin-based materials have been extensively studied as possible alternatives for commercially available carbon electrodes. However, the main drawback of this system has been stemming from the large volume changes and accompanying sharp decrease in capacity that occur during electrochemical cycles. Aifantis et al. have reported that active sites with spherical and smaller volume fraction could improve electrochemical properties of anode materials from the view point of fracture mechanics. Other researchers also have reported that nanoscale tin sulfide-based materials would lead to an improvement in the cycling stability of these systems. Especially, layered SnS2 nanoplates with swelling tolerant hosting spaces and enhanced guest accessibility would provide enhanced diffusion for Li ion, and lead to the formation of Li-Sn alloy during the cycle, and improve the

Current biomedical imaging techniques including magnetic resonance imaging (MRI), positron emission tomography (PET), and computed X-ray tomography (CT) are vital in the diagnosis of various diseases. Each imaging modality has its own merits and disadvantages, and a single technique does not possess all the required capabilities for comprehensive imaging. Therefore, multimodal imaging methods are quickly becoming important tools for state-of-the-art biomedical research and clinical diagnostics and therapeutics. In this Account, we will discuss synergistically integrated nanoparticle probes, which will be an essential tool in multimodal imaging technology. When inorganic nanoparticles are introduced into biological systems, their extremely small size and their exceptional physical and chemical properties make them useful probes for biological diagnostics. Nanoparticle probes can endow imaging techniques with enhanced signal sensitivity, better spatial resolution, and the ability to relay information about biological systems at the molecular and cellular levels. Simple magnetic nanoparticles function as MRI contrast enhancement probes. These magnetic nanoparticles can then serve as a core platform for the addition of other functional moieties including fluorescence tags, radionuclides, and other biomolecules for multimodal imaging, gene delivery, and cellular trafficking. For example, MRI-optical dual-modal probes composed of a fluorescent dye-doped silica (DySiO(2)) core surrounded by magnetic nanoparticles can macroscopically detect neuroblastoma cancer cells via MRI along with subcellular information via fluorescence imaging. Magnetic nanoparticles can also be coupled to radionuclides ((124)I) to construct MRI-PET dual-modal probes. Such probes can accurately detect lymph nodes (LNs), which are critical for assessing cancer metastasis. In vivo MRI/PET images can clearly identify small (approximately 3 mm) LNs along with precise anatomical information. Systems using multicomponent nanoparticles modified with biomolecules can also monitor gene expression and other markers in cell therapeutics studies. We have used hybrid stem cell-magnetic nanoparticle probes with MRI to monitor in vivo stem cell trafficking. MRI with hybrid probes of magnetic nanoparticles and adenovirus can detect target cells and can monitor gene delivery and the expression of green fluorescent proteins optically. Each component of such multimodal probes complements the other modalities, and their synergistic materials properties ultimately provide more accurate information in in vitro and in vivo biological systems.

nanosheetcrystalsfromthe tungsten oxide rods. The reaction between the carbondisulfide and hexadecylamine generates in situ hydrogendisulfideandhexadecylisothiocyanateviaN-hexadecyldithio-carbamate as a transient species [Eq.(1); see also Figures S1and S2 in the Supporting Information], and subsequent

Successful development of ultra-sensitive molecular imaging nanoprobes for the detection of targeted biological objects is a challenging task. Although magnetic nanoprobes have the potential to perform such a role, the results from probes that are currently available have been far from optimal. Here we used artificial engineering approaches to develop innovative magnetic nanoprobes, through a process that involved the systematic evaluation of the magnetic spin, size and type of spinel metal ferrites. These magnetism-engineered iron oxide (MEIO) nanoprobes, when conjugated with antibodies, showed enhanced magnetic resonance imaging (MRI) sensitivity for the detection of cancer markers compared with probes currently available. Also, we successfully visualized small tumors implanted in a mouse. Such high-performance, nanotechnology-based molecular probes could enhance the ability to visualize other biological events critical to diagnostics and therapeutics.

The systematic assembly of nanoscale constituents into highly ordered superlattices is of significant interest because of the potential of their multifunctionalities and the discovery of new collective properties. However, successful observations of such superlattice-associated nanoscale phenomena are still elusive. Here, we present magnetic superlattices of Co and Fe 3 O 4 nanoparticles with multidimensional symmetry of either AB (NaCl) or AB 2 (AlB 2 ). The discovery of significant enhancement (≈25 times) of ferrimagnetism is further revealed by forming previously undescribed superlattices of magnetically soft–hard Fe 3 O 4 @CoFe 2 O 4 through the confined geometrical effect of thermally driven intrasuperlattice phase transition between the nanoparticulate components.

Although multicomponent core-shell type nanomaterials are one of the highly desired structural motifs due to their simultaneous multifunctionalities, the fabrication strategy for such nanostructures is still in a primitive stage. Here, we present a redox-transmetalation process that is effective as a general protocol for the fabrication of high quality and well-defined core-shell type bimetallic nanoparticles on the sub-10 nm scale. Various core-shell type nanomaterials including Co@Au, Co@Pd, Co@Pt, and Co@Cu nanoparticles are fabricated via transmetalation reactions. Compared to conventional sequential reduction strategies, this transmetalation process has several advantages for the fabrication of core-shell type nanoparticles: (i) no additional reducing agent is needed and (ii) spontaneous shell layer deposition occurs on top of the core nanoparticle surface and thus prevents self-nucleation of secondarily added metals. We also demonstrate the versatility of these core-shell structures by transferring Co@Au nanoparticles from an organic phase to an aqueous phase via a surface modification process. The nanostructures, magnetic properties, and reaction byproducts of these core-shell nanoparticles are spectroscopically characterized and identified, in part, to confirm the chemical process that promotes the core-shell structure formation.

Inorganic nanocrystals with certain geometries exhibit unique shape dependent phenomena and subsequent utilization of them as building blocks for the key components of nanodevices is of huge interest. Architecture of these nanocrystals can be simply classified by their dimensionalities: zero-dimensional (0D) quantum dots including spheres, cubes, and tetrahedrons, one-dimensional nanorods and wires, two-dimensional (2D) nanodiscs and plates, and other advanced shapes such as rod-based multipods and nanostars. Among them, one-dimensional (1D) structures are of current interest in materials chemistry not only because they exhibit novel optical properties arising from dimensional anisotropy, but also because they can be utilized as key materials in addressable two-terminal circuits for nanodevice applications. We describe here the current studies on a variety of one-dimensional semiconductor and metal oxide nano-building blocks obtained by liquid phase colloidal synthetic methods. Several mechanisms and critical parameters for nanocrystal shape guiding processes are carefully examined. Once we understand the guiding laws of nanocrystals growth, many new nano-building blocks will easily be tailored for the discovery of novel phenomena and also further exciting advancement of nanoscience and nanotechnology.

The unique properties of magnetic nanocrystals provide them with high potential as key probes and vectors in the next generation of biomedical applications. Although superparamagnetic iron oxide nanocrystals have been extensively studied as excellent magnetic resonance imaging (MRI) probes for various cell trafficking, gene expression, and cancer diagnosis, further development of in vivo MRI applications has been very limited. Here, we describe in vivo diagnosis of cancer, utilizing a well-defined magnetic nanocrystal probe system with multiple capabilities, such as small size, strong magnetism, high biocompatibility, and the possession of active functionality for desired receptors. Our magnetic nanocrystals are conjugated to a cancer-targeting antibody, Herceptin, and subsequent utilization of these conjugates as MRI probes has been successfully demonstrated for the monitoring of in vivo selective targeting events of human cancer cells implanted in live mice. Further conjugation of these nanocrystal probes with fluorescent dye-labeled antibodies enables both in vitro and ex vivo optical detection of cancer as well as in vivo MRI, which are potentially applicable for an advanced multimodal detection system. Our study finds that high performance in vivo MR diagnosis of cancer is achievable by utilizing improved and multifunctional material properties of iron oxide nanocrystal probes.

Since inorganic nanocrystals exhibit unique shape-dependent nanoscale properties and can be utilized as basic building blocks for futuristic nanodevices, a systematic study on the shape control of these nanocrystals remains an important subject in materials and physical chemistry. In this feature article, we overview the recent progress on the synthetic development of symmetry-controlled colloidal nanocrystals of semiconductor and metal oxide, which are prepared through nonhydrolytic chemical routes. We describe their shape-guiding processes and illustrate the detailed key factors controlling their growth by examining various case studies of zero-dimensional spheres and cubes, one-dimensional rods, and quasi multidimensional structures such as disks, multipods, and stars. Specifically, the crystalline phase of nucleating seeds, surface energy, kinetic vs thermodynamic growth, and selective adhesion processes of capping ligands are found to be most crucial for the determination of the nanocrystal shape.

In this paper, we describe an easy and reliable method for the production of patterned monolayers of Co nanoparticles. A two-dimensional monolayer of Co nanoparticles is fabricated by spreading a nanoparticle solution over an air-water interface and then transferring it to a hydrophobic substrate by using the Langmuir-Blodgett (LB) method. Transmission electron microscopy (TEM) was used to show that, with increasing surface pressure, the Co nanoparticles become well-organized into a Langmuir monolayer with a hexagonal close-packed structure. By controlling the pH of the subphase, it was found that a monolayer of Co nanoparticles with long-range order could be obtained. Further, by transferring the Langmuir monolayer onto a poly(dimethoxysilane) (PDMS) mold, the selective micropatterning of the Co nanoparticles could be achieved on a patterned electronic circuit. The electronic transport properties of the Co nanoparticles showed the ohmic I-V curve.