Search

Antibody-antigen (Ab-Ag) recognition is the primary event at the basis of many biosensing platforms. In label-free biosensors, these events occurring at solid-liquid interfaces are complex and often difficult to control technologically across the smallest length scales down to the molecular scale. Here a molecular-scale technique, such as single-molecule force spectroscopy, is performed across areas of a real electrode functionalized for the immunodetection of an inflammatory cytokine, viz. interleukin-4 (IL4). The statistical analysis of force-distance curves allows us to quantify the probability, the characteristic length scales, the adhesion energy, and the time scales of specific recognition. These results enable us to rationalize the response of an electrolyte-gated organic field-effect transistor (EGOFET) operated as an IL4 immunosensor. Two different strategies for the immobilization of IL4 antibodies on the Au gate electrode have been compared: antibodies are bound to (i) a smooth film of His-tagged protein G (PG)/Au; (ii) a 6-aminohexanethiol (HSC6NH2) self-assembled monolayer on Au through glutaraldehyde. The most sensitive EGOFET (concentration minimum detection level down to 5 nM of IL4) is obtained with the first functionalization strategy. This result is correlated to the highest probability (30%) of specific binding events detected by force spectroscopy on Ab/PG/Au electrodes, compared to 10% probability on electrodes with the second functionalization. Specifically, this demonstrates that Ab/PG/Au yields the largest areal density of oriented antibodies available for recognition. More in general, this work shows that specific recognition events in multiscale biosensors can be assessed, quantified, and optimized by means of a nanoscale technique.

The application of replica molding has proven to be a valuable tool in the analysis of different forensic evidences in particular for its ability to extract the toolmarks from complex sample surfaces. A well known problem in the analysis of ballistic evidences is the accurate characterization of the lateral striae of real bullets seized on crime scenes after shots, due primarily to impact deformations and to unpredictable issues related to laboratory illumination setup. To overcome these problems a possible way is to confine over a flat surface all the features still preserving their three dimensionality. This can be achieved by a novel application of replica molding performed onto the relevant lateral portion of the bullet surface. A quasi-two-dimensional negative copy of the original tridimensional indented surface has been thus fabricated. It combines the real tridimensional topography of class characteristics (land and groove impressions) and of individual caracteristics (striae) impressed by rifled barrels on projectiles, moreover with the possibility of quantitative characterization of these features in a planar configuration, that will allow one-shot comparison of the "whole striae landscape" without the typical artifacts arising from the bullet shape and the illumination issue. A detailed analysis has been carried on at the morphological level by standard optical and scanning electron microscopy, while the 3D topography has been characterized by white light optical profilometry. A quantitative characterization of toolmarks of bullets derived from ammunitions shot by guns of large diffusion, as the Beretta 98 FS cal. 9×21 mm, has been performed and will be presented ranging between the whole landscape and the sub-μm resolution. To investigate the real potentiality of this technique, the experiment has been extended to highly impact-deformed projectiles., (Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.)

This protocol describes how to perform lithographically controlled wetting (LCW). LCW enables large-area patterning of microstructures and nanostructures of soluble materials, either organic or inorganic, including biological compounds in buffer solutions or compounds for cell guidance. LCW exploits the capillary forces of menisci established under the protrusions of a stamp placed in contact with a liquid film. In the space confined by each meniscus, the self-organization of the deposited solute yields highly ordered structures that replicate the motif of the stamp protrusions. The method does not require any particular infrastructure and can be accomplished by using simple tools such as compact discs or microscopy grids. Compared with other printing methods, LCW is universal for soluble materials, as it does not require chemical binding or other specific interactions between the solute and the surface. A process cycle takes from 2 to 36 h to be completed, depending on the choice of materials.

Background: Chromosomal dissection provides a direct advance for isolating DNA from cytogenetically recognizable region to generate genetic probes for fluorescence in situ hybridization, a technique that became very common in cyto and molecular genetics research and diagnostics. Several reports describing microdissection methods (glass needle or a laser beam) to obtain specific probes from metaphase chromosomes are available. Several limitations are imposed by the traditional methods of dissection as the need for a large number of chromosomes for the production of a probe. In addition, the conventional methods are not suitable for single chromosome analysis, because of the relatively big size of the microneedles. Consequently new dissection techniques are essential for advanced research on chromosomes at the nanoscale level., Results: We report the use of Atomic Force Microscope (AFM) as a tool for nanomanipulation of single chromosomes to generate individual cell specific genetic probes. Besides new methods towards a better nanodissection, this work is focused on the combination of molecular and nanomanipulation techniques which enable both nanodissection and amplification of chromosomal and chromatidic DNA. Cross-sectional analysis of the dissected chromosomes reveals 20 nm and 40 nm deep cuts. Isolated single chromosomal regions can be directly amplified and labeled by the Degenerate Oligonucleotide-Primed Polymerase Chain Reaction (DOP-PCR) and subsequently hybridized to chromosomes and interphasic nuclei., Conclusions: Atomic force microscope can be easily used to visualize and to manipulate biological material with high resolution and accuracy. The fluorescence in situ hybridization (FISH) performed with the DOP-PCR products as test probes has been tested succesfully in avian microchromosomes and interphasic nuclei. Chromosome nanolithography, with a resolution beyond the resolution limit of light microscopy, could be useful to the construction of chromosome band libraries and to the molecular cytogenetic mapping related to the investigation of genetic diseases.

Sequential and parallel local oxidation nanolithographies have been applied to pattern pentacene samples by creating a variety of nanostructures. The sequential local oxidation process is performed with an atomic force microscope and requires the application of a sequence of voltage pulses of 36V for 1ms. The parallel local oxidation process is performed by using a conductive and patterned stamp. Then, a voltage pulse is applied between the stamp and the pentacene surface. Patterns formed by arrays of parallel lines covering 1mm(2) regions and with a periodicity of less than 1microm have been generated in a few seconds. We also show that the patterns can be used as templates for the deposition of antibodies.

Single molecule magnets (SMM) are a class of molecules exhibiting magnetic properties similar to those observed in conventional bulk magnets, but of molecular origin. SMMs have been proposed as potential candidates for several technological applications that require highly controlled thin films and patterns. Here we present an overview of the most important approaches for thin film growth and micro(nano)-patterning of SMM, giving special attention to Mn(12) based molecules. We present both conventional approaches to thin film growth (Langmuir-Blodgett, chemical approach, dip and dry, laser evaporation), patterning (micro-contact printing, deposition on patterned surface, moulding of homogeneous films) and new methods specifically developed for SMM (lithographically controlled wetting, lithographically controlled de-mixing).

Charge transport properties in organic semiconductors depend strongly on molecular order. Here we demonstrate field-effect transistors where drain current flows through a precisely defined array of nanostripes made of crystalline and highly ordered molecules. The molecular stripes are fabricated across the channel of the transistor by a stamp-assisted deposition of the molecular semiconductors from a solution. As the solvent evaporates, the capillary forces drive the solution to form menisci under the stamp protrusions. The solute precipitates only in the regions where the solution is confined by the menisci once the critical concentration is reached and self-organizes into molecularly ordered stripes 100-200 nm wide and a few monolayers high. The charge mobility measured along the stripes is 2 orders of magnitude larger than the values measured for spin-coated thin films.

We propose an integrated top-down and bottom-up approach to single-step nanofabrication of complex nanostructures made of different materials. The process, termed lithographically controlled etching (LCE), starts with a drop of an etching solution cast on the surface to be patterned. By placing a polymeric mold on the substrate, the stamp protrusions come into contact with the surface, thus protecting it, whereas the surface beneath the mold recesses is exposed to a thin layer of etching solution, allowing the surface to be etched. By dispersing nanoparticles into the etching solution, these can be deposited and self-organize in the recesses on the substrate as these are excavated. We demonstrate here the fabrication of complex structures and nanowires 30 nm wide. Moreover, by exploiting capillary forces, it is possible to deposit nanoparticles at precise positions with respect to optically addressable microstructures, thus realizing a multiscale functional pattern. [ABSTRACT FROM AUTHOR]