Search

The oxidation rates of diesel soot from the combustion chamber of a running diesel engine were calculated based on the particle size distributions at different crank angles. The primary particle diameter and nanostructure of soot were obtained by means of high-resolution transmission electron microscopy (HRTEM). The soot characteristics were also investigated by oxidative thermogravimetry and Raman scattering spectrometry. The results showed the soot nanostructures were dependent on engine operation conditions and combustion phases. The oxidation rates were found to differ by nearly fourfold from that calculated by the Nagle/Strickland-Constable (NSC) model for the soots studied here. The varied oxidation rates were interpreted in terms of differences in nanostructure between the soots. The experimental results were used to modify the NSC model and the fringe length of in-cylinder diesel soot was chosen to describe the influence of graphitisation on the oxidation of soot. The modified NSC model lessened the deviation between measurements and predictions. [ABSTRACT FROM AUTHOR]

Abstract: The nanostructure, fractal dimension and size of in-cylinder soot during diesel combustion process have been investigated for a heavy-duty direct injection diesel engine, using a total cylinder sampling system followed by high-resolution transmission electron microscopy and Raman scattering spectrometry. Different structural organizations of in-cylinder soot are found depending upon the combustion phase. It is revealed that both the fringe tortuosity and separation distance decrease as combustion proceeds, while the mean fringe length increases distinctly from 1.00 to 2.13nm, indicating the soot evolution toward a more graphitic structure during the combustion process. The fractal dimensions of aggregates are in a range of 1.20–1.74 at various crank angles under the applied engine operating conditions. As temperature and pressure increase, the fractal dimension decreases significantly to a minimum at the early diffusion combustion stage. The soot particles become more compact again as the fractal dimension increases during the subsequent combustion period. Primary particle sizes start small, go through a maximum in the early diffusion combustion phase and decline again as combustion proceeds. [Copyright &y& Elsevier]

Abstract: The diesel soot was extracted from the chamber of a running diesel engine using a total cylinder sampling system. A structural description and size distribution of the soot spherules were performed by means of high-resolution transmission electron microscopy (HRTEM). HRTEM image analysis was carried out to achieve semi-quantitative information about the soot organization. Different nanostructures were found in dependence upon the engine test conditions. A better organization of the graphitic layers occurred for the in-cylinder soot as the expansion stroke developed. The oxygen concentrations at sampling angles and the cylinder pressure were measured. The oxidation rates of the in-cylinder soot during the late combustion phase were calculated according to the differences of spherules size distributions between two consecutive sampling angles. The soot reactivity in dependence on the nanostructure was shown after deducting the effect of oxygen concentration and temperature. The increase of resistance toward oxidation was associated to the increase of the structural order for the in-cylinder soot. The results are a useful database for testing the structure–property relationship between the nanostructure and the reactivity of the in-cylinder diesel soot. [ABSTRACT FROM AUTHOR]