Search

The immune response to an implanted biomaterial is orchestrated by macrophages. In this study various nanogrooved patterns were created by using laser interference lithography and reactive ion etching. The created nanogrooves mimic the natural extracellular matrix environment. Macrophage cell culture demonstrated that interleukin 1β and TNF-α cytokine production were upregulated on nanogrooved substrates. In vivo subcutaneous implantation in a validated mouse cage model for 14 days demonstrated that nanogrooves enhanced and guided cell adhesion, and few multinucleated cells were formed. In agreement with the in vitro results, cytokine production was found to be nanogroove dependent, as interleukin 1β, TNF-α, TGF-β and osteopontin became upregulated. The results indicate that biomaterial surface texturing, especially at the nanometric scale, can be used to control macrophage activation to induce a wound healing response, rather than a profound inflammatory response. From the Clinical Editor: The authors investigate various nano-grooved patterns that mimic the natural extracellular matrix environment and demonstrate (both in macrophage cultures and in vivo) that interleukin 1β and TNF-α cytokine production is dependent upon surface texturing at the nanometric scale. They propose that modified surfaces may trigger macrophage activation to promote a wound healing response., (Copyright © 2012 Elsevier Inc. All rights reserved.)

Organised nanotopography mimicking the natural extracellular matrix can be used to control morphology, cell motility, and differentiation. However, it is still unknown how specific cell types react with specific patterns. Both initial adhesion and preferential cell migration may be important to initiate and increase cell locomotion and coverage with cells, and thus achieve an enhanced wound healing response around an implantable material. Therefore, the aim of this study was to evaluate how MC3T3-E1 osteoblast initial adhesion and directional migration are influenced by nanogrooves with pitches ranging from 150 nm up to 1000 nm. In this study, we used a multi-patterned substrate with five different groove patterns and a smooth area with either a concentric or radial orientation. Initial cell adhesion measurements after 10 s were performed using atomic force spectroscopy-assisted single-cell force spectroscopy, and demonstrated that nascent cell adhesion was highly induced by a 600 nm pitch and reduced by a 150 nm pitch. Addition of RGD peptide significantly reduced adhesion, indicating that integrins and cell adhesive proteins (e.g. fibronectin or vitronectin) are key factors in specific cell adhesion on nanogrooved substrates. Also, cell migration was highly dependent on the groove pitch; the highest directional migration parallel to the grooves was observed on a 600 nm pitch, whereas a 150 nm pitch restrained directional cell migration. From this study, we conclude that grooves with a pitch of 600 nm may be favourable to enhance fast wound closure, thereby promoting tissue regeneration.

Nanopatterns on titanium may enhance endosseous implant biofunctionality. To enable biological studies to prove this hypothesis, we developed a scalable method of fabricating nanogrooved titanium substrates. We defined nanogrooves by nanoimprint lithography (NIL) and a subsequent pattern transfer to the surface of ASTM grade 2 bulk titanium applying a soft-mask for chlorine-based reactive ion etching (RIE). With respect to direct write lithographic techniques the method introduced here is fast and capable of delivering uniformly patterned areas of at least 4 cm(2). A dedicated silicon nanostamp process has been designed to generate the required thickness of the soft-mask for the NIL-RIE pattern transfer. Stamps with pitch sizes from 1000 nm down to 300 nm were fabricated using laser interference lithography (LIL) and deep cryogenic silicon RIE. Although silicon nanomachining was proven to produce smaller pitch sizes of 200 nm and 150 nm respectively, successful pattern transfer to titanium was only possible down to a pitch of 300 nm. Hence, the smallest nanogrooves have a width of 140 nm. An x-ray photoelectron spectroscopy study showed that only very few contaminations arise from the fabrication process and a cytotoxicity assay on the nanopatterned surfaces confirmed that the obtained nanogrooved titanium specimens are suitable for in vivo studies in implantology research.

The natural environment of a living cell is not only organized on a micrometer, but also on a nanometer scale. Mimicking such a nanoscale topography in implantable biomaterials is critical to guide cellular behavior. Also, a correct positioning of cells on biomaterials is supposed to be very important for promoting wound healing and tissue regeneration. The exact mechanism by which nanotextures can control cellular behavior are thus far not well understood and it is thus far unknown how cells recognize and respond to certain surface patterns, whereas a directed response appears to be absent on other pattern types. Focal adhesions (FAs) are known to be involved in the process of specific pattern recognition and subsequent response by cells. In this study, we used a high throughput screening "Biochip" containing 40 different nanopatterns to evaluate the influence of several nanotopographical cues like depth, width, (an)isotropy and spacing (ridge-groove ratio) on osteoblast behavior. Microscopical analysis and time lapse imaging revealed that an isotropic topography did not alter cell morphology, but it highly induced cell motility. Cells cultured on anisotropic topographies on the other hand, were highly elongated and aligned. Time-lapse imaging revealed that cell motility is highly dependent on the ridge-groove ratio of anisotropic patterns. The highest motility was observed on grooves with a ratio of 1:3, whereas the lowest motility was observed on ratios of 1:1 and 3:1. FA measurements demonstrated that FA-length decreased with increasing motility. From the study it can be concluded that osteoblast behavior is tightly controlled by nanometer surface features.

To fight bone diseases characterized by poor bone quality like osteoporosis and osteoarthritis, as well as in reconstructive surgery, there is a need for a new generation of implantable biomaterials. It is envisioned that implant surfaces can be improved by mimicking the natural extracellular matrix of bone tissue, which is highly a organized nano-composite. In this study we aimed to get a better understanding of osteoblast response to nanometric grooved substrates varying in height, width and spacing. A throughput screening biochip was created using electron beam lithography. Subsequently, uniform large-scale nanogrooved substrates were created using laser interference lithography and reactive ion etching. Results showed that osteoblasts were responsive to nanopatterns down to 75 nm in width and 33nm in depth. SEM and TEM studies showed that an osteoblast-driven calcium phosphate (CaP) mineralization was observed to follow the surface pattern dimensions. Strikingly, aligned mineralization was found on even smaller nanopatterns of 50 nm in width and 17 nm in depth. A single cell based approach for real time PCR demonstrated that osteoblast-specific gene expression was increased on nanopatterns relative to a smooth control. The results indicate that nanogrooves can be a very promising tool to direct the bone response at the interface between an implant and the bone tissue., (Copyright 2010 Elsevier Ltd. All rights reserved.)