Search

A significant number of new chemical entities in the drug development pipeline are poorly soluble, therefore routes that facilitate effective administration is of considerable value. Lipid nanoparticles have proved an attractive approach for drug delivery; however, challenges that include optimising drug loading and understanding the impact of drug physiochemical parameters on nanoparticle properties have limited progression. In this work, we investigate the effect of modifying the log  P of a model drug on the formation and stability of lipid-based nanoparticles. A range of model drug analogues with systematically varying alkyl chains were produced using a lamivudine (nucleoside analog reverse transcriptase inhibitor) scaffold and processed into lipid nanoparticles by nanoprecipitation. Characterisation included evaluation of particle diameter, size distribution, drug loading and nanoformulation stability. A distinct correlation with the LaMer model of nucleation was observed and log  P appeared to strongly influence rates of nucleation. Model drugs with high log  P were uniform in particle size and distribution and offered enhanced stability. In addition, various model drug/lipid blends were produced and their physical properties were investigated using dynamic light scattering (DLS) and differential scanning calorimetry (DSC). Complex mixtures of lipids were shown to influence formulation crystallinity and strategies to form uniform and stable lipid based nanoparticles of high drug loading- through manipulation of log  P are discussed.

Suboptimal adherence to antiretroviral (ARV) therapy can lead to insufficient drug exposure leading to viral rebound and increased likelihood of resistance. This has driven the development of long-acting injectable (LAI) formulations which may mitigate some of these problems. Maraviroc (MVC) is an orally dosed CCR5 antagonist approved for use in patients infected with CCR5-trophic HIV-1. MVC prevents viral entry into host cells, is readily distributed to biologically relevant tissues and has an alternative resistance profile compared to more commonly used therapies. This makes a MVC LAI formulation particularly appealing for implementation in Pre-Exposure Prophylaxis (PrEP). A 70 wt% MVC-loaded nanodispersion stabilised with polyvinyl alcohol (PVA) and sodium 1,4-bis(2-ethylhexoxy)-1,4-dioxobutane-2-sulfonate (AOT) was prepared using emulsion-templated freeze-drying. In vitro release rate studies revealed over a 22% decrease in MVC release rate constant across a size selective membrane compared with an aqueous solution of MVC (<5% DMSO). Pharmacokinetic studies in rats were subsequently carried out following intramuscular injection of either the nanodispersion or an aqueous MVC preparation (<5% DMSO). Results demonstrated over a 3.4-fold increase in AUC 0-∞ (1959.71 vs 567.17 ng.h ml), over a 2.6-fold increase in MVCs terminal half-life (t½) (140.69 vs 53.23 h) and MVC concentrations present up to 10-days. These data support development of a MVC LAI formulation with potential application in HIV therapy or prevention., (Copyright © 2018 Elsevier B.V. All rights reserved.)

Oral drug administration remains the preferred approach for treatment of HIV in most patients. Maraviroc (MVC) is the first in class co-receptor antagonist, which blocks HIV entry into host cells. MVC has an oral bioavailability of approximately 33%, which is limited by poor permeability as well as affinity for CYP3A and several drug transporters. While once-daily doses are now the favoured option for HIV therapy, dose-limiting postural hypotension has been of theoretical concern when administering doses high enough to achieve this for MVC (particularly during coadministration of enzyme inhibitors). To overcome low bioavailability and modify the pharmacokinetic profile, a series of 70 wt% MVC solid drug nanoparticle (SDN) formulations (containing 30 wt% of various polymer/surfactant excipients) were generated using emulsion templated freeze-drying. The lead formulation contained PVA and AOT excipients ( MVC SDN PVA/AOT ), and was demonstrated to be fully water-dispersible to release drug nanoparticles with z-average diameter of 728 nm and polydispersity index of 0.3. In vitro and in vivo studies of MVC SDN PVA/AOT showed increased apparent permeability of MVC, compared to a conventional MVC preparation, with in vivo studies in rats showing a 2.5-fold increase in AUC (145.33 vs. 58.71 ng h ml -1 ). MVC tissue distribution was similar or slightly increased in tissues examined compared to the conventional MVC preparation, with the exception of the liver, spleen and kidneys, which showed statistically significant increases in MVC for MVC SDN PVA/AOT . These data support a novel oral format with the potential for dose reduction while maintaining therapeutic MVC exposure and potentially enabling a once-daily fixed dose combination product., (Copyright © 2018. Published by Elsevier B.V.)

The increasing global prevalence of human immunodeficiency virus (HIV) is estimated at 36.7 million people currently infected. Lifelong antiretroviral (ARV) drug combination dosing allows management as a chronic condition by suppressing circulating viral load to allow for a near-normal life; however, the daily burden of oral administration may lead to non-adherence and drug resistance development. Long-acting (LA) depot injections of nanomilled poorly water-soluble ARVs have shown highly promising clinical results with drug exposure largely maintained over months after a single injection. ARV oral combinations rely on water-soluble backbone drugs which are not compatible with nanomilling. Here, we evaluate a unique prodrug/nanoparticle formation strategy to facilitate semi-solid prodrug nanoparticles (SSPNs) of the highly water-soluble nucleoside reverse transcriptase inhibitor (NRTI) emtricitabine (FTC), and injectable aqueous nanodispersions; in vitro to in vivo extrapolation (IVIVE) modelling predicts sustained prodrug release, with activation in relevant biological environments, representing a first step towards complete injectable LA regimens containing NRTIs.

The use of solid drug nanoparticles (SDN) has become an established approach to improve drug delivery, supporting enhancement of oral absorption and long-acting administration strategies. A broad range of SDNs have been successfully utilised for multiple products and several development programmes are currently underway across different therapeutic areas. With some approaches, a large range of material space is available with diversity in physical characteristics, excipient choice and pharmacological behaviour. The selection of SDN lead candidates is a complex process including a broad range of in vitro and in vivo data, and a better understanding of how physical characteristics relate to performance is required. Physiologically-based pharmacokinetic (PBPK) modelling is based upon a comprehensive integration of experimental data into a mathematical description of drug distribution, allowing simulation of SDN pharmacokinetics that can be qualified in vivo prior to human prediction. This review aims to provide a description of how PBPK can find application into the development of SDN. Integration of predictive PBPK modelling into SDN development allows a better understanding of the SDN dose-response relationship, supporting a framework for rational optimisation while reducing the risk of failure in developing safe and effective nanomedicines., (Copyright © 2018 Elsevier B.V. All rights reserved.)

Considerable scope exists to vary the physical and chemical properties of nanoparticles, with subsequent impact on biological interactions; however, no accelerated process to access large nanoparticle material space is currently available, hampering the development of new nanomedicines. In particular, no clinically available nanotherapies exist for HIV populations and conventional paediatric HIV medicines are poorly available; one current paediatric formulation utilizes high ethanol concentrations to solubilize lopinavir, a poorly soluble antiretroviral. Here we apply accelerated nanomedicine discovery to generate a potential aqueous paediatric HIV nanotherapy, with clinical translation and regulatory approval for human evaluation. Our rapid small-scale screening approach yields large libraries of solid drug nanoparticles (160 individual components) targeting oral dose. Screening uses 1 mg of drug compound per library member and iterative pharmacological and chemical evaluation establishes potential candidates for progression through to clinical manufacture. The wide applicability of our strategy has implications for multiple therapy development programmes., Competing Interests: M.G., T. O. M., P.M., D.S., S.P.R. and A.O. have filed patents relating to the LPV SDNs and LPV/RTV combination SDNs described herein. The remaining authors declare no competing financial interests.

Ritonavir is a protease inhibitor utilized primarily as a pharmaco-enhancer with concomitantly administered antiviral drugs including other protease inhibitors. However, poor tolerance, serious side effects, and toxicities associated with drug-drug interactions are common during exposure to ritonavir. The aim of this work was to investigate the impact of nanoformulation on ritonavir pharmacological properties. Emulsion-templated freeze-drying techniques were used to generate ritonavir (10 wt %) solid drug nanoparticle formulations. A total of 68 ritonavir formulations containing various mixtures of excipients were assessed for inhibition of CYP3A4 in baculosomes and primary human hepatocytes. Accumulation and cytotoxicity were assessed in HepG2 (hepatocytes), Caco-2 (intestinal), THP-1 (monocytes), A-THP-1 (macrophage), and CEM (lymphocytes). Transcellular permeation across Caco-2 cells was also assessed. From 68 solid drug nanoparticle formulations tested, 50 (73.5%) for baculosome and 44 (64.7%) for human primary hepatocytes exhibited enhanced CYP3A4 inhibition relative to an aqueous ritonavir solution. Sixty-one (89.7%) and 49 (72%) solid drug nanoformulations had higher apical to basal permeation across Caco-2 cells than aqueous solution of ritonavir after 60 and 120 min, respectively. No significant difference in cellular accumulation was observed for any solid drug nanoparticle for any cell type compared to aqueous ritonavir. However, incubation with the vast majority of solid drug nanoparticle formulations resulted in lower cytotoxicity of ritonavir than detected with an aqueous solution. These data provide in vitro proof of concept for improved inhibition of CYP3A4 by ritonavir through formation of solid drug nanoparticles. Nanodispersions also showed enhanced permeability across Caco-2 cells lower cytotoxicity across hepatic, intestinal, and immune cell types compared to an aqueous solution of ritonavir.

Aim: Oral and intramuscular sustained-release antiretroviral solid drug nanoparticles (SDNs) are in development but there is limited understanding of whether nanoparticles or dissolved drug predominate systemically., Materials & Methods: A flow cytometric method was developed to analyze SDNs in biological fluids such as plasma, including the putative formation of a protein corona., Results: SDNs were found to be stable in plasma and could be observed using the techniques developed here. In addition, transferrin, fibrinogen and albumin were found to be associated with SDNs upon incubation., Conclusion: This methodology has enabled us to determine protein interactions of SDNs in solution without the requirement of separation from the matrix. This will enable further studies of their biological fate.

Nanomedicine strategies have produced many commercial products. However, no orally dosed HIV nanomedicines are available clinically to patients. Although nanosuspensions of drug particles have demonstrated many benefits, experimentally achieving >25 wt% of drug relative to stabilizers is highly challenging. In this study, the emulsion-templated freeze-drying technique for nanoparticles formation is applied for the first time to optimize a nanodispersion of the leading non-nucleoside reverse transcriptase inhibitor efavirenz, using clinically acceptable polymers and surfactants. Dry monoliths containing solid drug nanoparticles with extremely high drug loading (70 wt% relative to polymer and surfactant stabilizers) are stable for several months and reconstitute in aqueous media to provide nanodispersions with z-average diameters of 300 nm. The solid drug nanoparticles exhibit reduced cytoxicity and increased in vitro transport through model gut epithelium. In vivo studies confirm bioavailability benefits with an approximately four-fold higher pharmacokinetic exposure after oral administration to rodents, and predictive modeling suggests dose reduction with the new formulation may be possible., (© 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Heterogeneity in response to HIV treatments has been attributed to several causes including variability in pharmacokinetic exposure. Nanomedicine applications have a variety of advantages compared with traditional formulations, such as the potential to increase bioavailability and specifically target the site of action. Our group is focusing on the development of nanoformulations using a closed-loop design process in which nanoparticle optimization (disposition, activity and safety) is a continuous process based on experimental pharmacological data from in vitro and in vivo models. Solid drug nanoparticles, polymer-based drug-delivery carriers as well as nanoemulsions are nanomedicine options with potential application to improve antiretroviral deployment.

The antiretroviral drug efavirenz displays many desirable pharmacokinetic properties such as a long half-life enabling once daily dosing but suffers from central nervous system safety issues. Various nanotechnologies have been explored to mitigate some of the limitations with efavirenz. While there has been progress in increasing the bioavailability, there has been no attempt to assess the impact of increased exposure to efavirenz on central nervous system safety. The uptake of aqueous and solid drug nanoparticle (SDN) formulations of efavirenz was assessed in the human cerebral microvessel endothelial cells/D3 brain endothelial cell line. The mechanisms of uptake were probed using a panel of transport and endocytosis inhibitors. The cellular accumulation of an efavirenz aqueous solution was significantly reduced by amantadine, but this was not observed with SDNs. The uptake of efavirenz SDNs was reduced by dynasore, but concentrations of the efavirenz aqueous solution were not affected. These data indicate that efavirenz is a substrate for transporters in brain endothelial cells (amantadine is an inhibitor of organic cation transporters 1 and 2), and formation of SDNs may bypass this interaction in favour of a mechanism involving dynamin-mediated endocytosis. [ABSTRACT FROM AUTHOR]

Superparamagnetic iron oxide nanoparticles (SPIONs) have been identified as a promising material for biomedical applications. These include as contrast agents for medical imaging, drug delivery and/or cancer cell treatment. The nanotoxicological profile of SPIONs has been investigated in different studies and the distribution of SPIONs in the human body has not been fully characterized. The aim of this study was to develop a physiologically- based pharmacokinetic (PBPK) model to predict the pharmacokinetics of SPIONs. The distribution and accumulation of SPIONs in organs were simulated taking into consideration their penetration through capillary walls and their active uptake by specialized macrophages in the liver, spleen and lungs. To estimate the kinetics of SPION uptake, a novel experimental approach using primary macrophages was developed. The murine PBPK model was validated against in vivo pharmacokinetic data, and accurately described accumulation in liver, spleen and lungs. After validation of the murine model, a similar PBPK approach was developed to simulate the distribution of SPIONs in humans. These data demonstrate the utility of PBPK modeling for estimating biodistribution of inorganic nanoparticles and represents an initial platform to provide computational prediction of nanoparticle pharmacokinetics. [ABSTRACT FROM AUTHOR]

Solid drug nanoparticles (SDNs) are a nanotechnology with favourable characteristics to enhance drug delivery and improve the treatment of several diseases, showing benefit for improved oral bioavailability and injectable long-acting medicines. The physicochemical properties and composition of nanoformulations can influence the absorption, distribution, and elimination of nanoparticles; consequently, the development of nanoparticles for drug delivery should consider the potential role of nanoparticle characteristics in the definition of pharmacokinetics. The aim of this study was to investigate the pharmacological behaviour of efavirenz SDNs and the identification of optimal nanoparticle properties and composition. Seventy-seven efavirenz SDNs were included in the analysis. Cellular accumulation was evaluated in HepG2 (hepatic) and Caco-2 (intestinal), CEM (lymphocyte), THP1 (monocyte), and A-THP1 (macrophage) cell lines. Apparent intestinal permeability (Papp) was measured using a monolayer of Caco-2 cells. The Papp values were used to evaluate the potential benefit on pharmacokinetics using a physiologically based pharmacokinetic model. The generated SDNs had an enhanced intestinal permeability and accumulation in different cell lines compared to the traditional formulation of efavirenz. Nanoparticle size and excipient choice influenced efavirenz apparent permeability and cellular accumulation, and this appeared to be cell line dependent. These findings represent a valuable platform for the design of SDNs, giving an empirical background for the selection of optimal nanoparticle characteristics and composition. Understanding how nanoparticle components and physicochemical properties influence pharmacological patterns will enable the rational design of SDNs with desirable pharmacokinetics. [ABSTRACT FROM AUTHOR]

An editorial is presented on the use of the physiologically-based pharmacokinetic (PBPK) modelling for the nanomedicine development. Topics discussed include the impact of PBPK modelling in predicting the nanoparticle physical properties of pharmacokinetics of different organisms, the drug penetration into tissues and the nanomaterial distribution for carbon nanoparticles.