Search

Reduction of target species by microorganisms and their subsequent precipitation into sparingly soluble mineral phase nanoparticles have been referred to as microbially mediated nanomaterial synthesis. Here, we describe the microbially mediated production of nano-dimensioned spinel structured zinc-gallate (ZnGa 2 O 4 ) phosphors exhibiting different emission performance with varying substituted elements. Interestingly, in the microbially mediated phosphor production described herein, there were no reducible metal- and non-metal species composing the target minerals. By varying substituted elements, zinc-gallate phosphors present typical red, green, and blue (RGB) emission. An apparent whitish emission was accomplished by blending phosphors. A promising potential for white light produced by biosynthesized mixtures of Cr-, Mn-, and Co- substituted zinc-gallates representing RGB emissions was evidenced. Microbial activity supplied a reducing driving force and provided appropriate near neutral pH and reduced Eh conditions to thermodynamically precipitate spinel structured nanomaterials from supersaturated divalent and trivalent cations. This result complemented conventional biomineralization concepts and expanded the realm of biomanufacturing nanomaterials for further applications. STATEMENT OF SIGNIFICANCE: This study substantiated that circumstances of a suitable pH/Eh derived from bacterial activity, divalent/trivalent ion supply, buffering capacity, and supersaturation could precipitate spinel structure nanoparticles. Even though live or dead cells with membrane could enhance the nuclei generation, the spinel structured phases were produced regardless of existence of live or dead cells and reducible metal or non-metal species incorporating into the produced solid phases. This finding led to production of a series of metal-substituted zinc-gallates with specific RGB emission that can result in whitish light using simple blending. We believe our findings could expand the realm of nanomaterial synthesis using low cost, highly scalable bio-nanotechnology., (Copyright © 2019 Acta Materialia Inc. All rights reserved.)

The thermophilic anaerobic metal-reducing bacterium Thermoanaerobacter sp. X513 efficiently produces zinc sulfide (ZnS) nanoparticles (NPs) in laboratory-scale (≤ 24-L) reactors. To determine whether this process can be up-scaled and adapted for pilot-plant production while maintaining NP yield and quality, a series of pilot-plant scale experiments were performed using 100-L and 900-L reactors. Pasteurization and N2-sparging replaced autoclaving and boiling for deoxygenating media in the transition from small-scale to pilot plant reactors. Consecutive 100-L batches using new or recycled media produced ZnS NPs with highly reproducible ~2-nm average crystallite size (ACS) and yields of ~0.5 g L(-1), similar to the small-scale batches. The 900-L pilot plant reactor produced ~320 g ZnS without process optimization or replacement of used medium; this quantity would be sufficient to form a ZnS thin film with ~120 nm thickness over 0.5 m width × 13 km length. At all scales, the bacteria produced significant amounts of acetic, lactic, and formic acids, which could be neutralized by the controlled addition of sodium hydroxide without the use of an organic pH buffer, eliminating 98 % of the buffer chemical costs. The final NP products were characterized using XRD, ICP-OES, TEM, FTIR, PL, DLS, HPLC, and C/N analyses, which confirmed that the growth medium without organic buffer enhanced the ZnS NP properties by reducing carbon and nitrogen surface coatings and supporting better dispersivity with similar ACS.

A series of semiconducting zinc sulfide (ZnS) nanoparticles were scalably, reproducibly, controllably and economically synthesized with anaerobic metal-reducing Thermoanaerobacter species. These bacteria reduced partially oxidized sulfur sources to sulfides that extracellularly and thermodynamically incorporated with zinc ions to produce sparingly soluble ZnS nanoparticles with ∼5nm crystallites at yields of ∼5gl(-1)month(-1). A predominant sphalerite formation was facilitated by rapid precipitation kinetics, a low cation/anion ratio and a higher zinc concentration compared to background to produce a naturally occurring hexagonal form at the low temperature, and/or water adsorption in aqueous conditions. The sphalerite ZnS nanoparticles exhibited narrow size distribution, high emission intensity and few native defects. Scale-up and emission tunability using copper doping were confirmed spectroscopically. Surface characterization was determined using Fourier transform infrared and X-ray photoelectron spectroscopies, which confirmed amino acid as proteins and bacterial fermentation end products not only maintaining a nano-dimensional average crystallite size, but also increasing aggregation. The application of ZnS nanoparticle ink to a functional thin film was successfully tested for potential future applications., (Copyright © 2014 Acta Materialia Inc. All rights reserved.)

Interest in engineered nanostructures has risen in recent years due to their use in energy conservation strategies and biomedicine. To ensure prudent development and use of nanomaterials, the fate and effects of such engineered structures on the environment should be understood. Interactions of nanomaterials with environmental microorganisms are inevitable, but the general consequences of such interactions remain unclear, due to a lack of standard methods for assessing such interactions. Therefore, we have initiated a multianalytical approach to understand the interactions of synthesized nanoparticles with bacterial systems. These efforts are focused initially on cerium oxide nanoparticles and model bacteria in order to evaluate characterization procedures and the possible fate of such materials in the environment. The growth and viability of the Gram-negative species Escherichia coli and Shewanella oneidensis, a metal-reducing bacterium, and the Gram-positive species Bacillus subtilis were examined relative to cerium oxide particle size, growth media, pH, and dosage. A hydrothermal synthesis approach was used to prepare cerium oxide nanoparticles of defined sizes in order to eliminate complications originating from the use of organic solvents and surfactants. Bactericidal effects were determined from MIC and CFU measurements, disk diffusion tests, and live/dead assays. For E. coli and B. subtilis, clear strain- and size-dependent inhibition was observed, whereas S. oneidensis appeared to be unaffected by the particles. Transmission electron microscopy along with microarray-based transcriptional profiling was used to understand the response mechanism of the bacteria. Use of multiple analytical approaches adds confidence to toxicity assessments, while the use of different bacterial systems highlights the potential wide-ranging effects of nanomaterial interactions in the environment.

Sequential NanoFermentation (SNF) is a novel process which entails sparging microbially produced gas containing H2S from a primary reactor through a concentrated metal-acetate solution contained in a secondary reactor, thereby precipitating metallic sulfide nanoparticles (e.g., ZnS, CuS, or SnS). SNF holds an advantage over single reactor nanoparticle synthesis strategies, because it avoids exposing the microorganisms to high concentrations of toxic metal and sulfide ions. Also, by segregating the nanoparticle products from biological materials, SNF avoids coating nanoparticles with bioproducts that alter their desired properties. Herein, we report the properties of ZnS nanoparticles formed from SNF as compared with ones produced directly in a primary reactor (i.e., conventional NanoFermentation, or “CNF”), commercially available ZnS, and ZnS chemically synthesized by bubbling H2S gas through a Zn-acetate solution. The ZnS nanoparticles produced by SNF provided improved optical properties due to their smaller crystallite size, smaller overall particle sizes, reduced biotic surface coatings, and reduced structural defects. SNF still maintained the advantages of NanoFermentation technology over chemical synthesis including scalability, reproducibility, and lower hazardous waste burden. [ABSTRACT FROM AUTHOR]

The texture and mineralogy of solid phases resulting from biogeochemical metal reduction of U(VI)-FeOOH slurries was investigated over a period of four years. Solid-phase reaction products were analyzed with EXAFS, TEM, and XRD following fermentative reduction of uranium-loaded ferric hydroxide precursors with 0.01 and 0.05 cation mole fraction (CMF) U by cultures of Thermoanaerobacter sp. strain TOR-39. Only minor changes could be distinguished between 3 and 51 months for most slurries. Magnetite, goethite, uraninite, and minor akaganéite were present after 3 months at both U-CMFs. Akaganéite was not detected by XRD after 3 months, but was still observed by TEM after 50 months. Increasing uranium in the starting slurries led to a greater proportion of oxidized iron in the solid-phase products. Euhedral goethite and subhedral to euhedral magnetite were observed at all times. Uraninite was observed in clusters of <10 nm particles without any particular relationship to the iron minerals. HRTEM imaging indicated that even the smallest uraninite particles were well crystallized, with textures that remained consistent throughout the duration of experiments. X-ray absorption spectra after 3 months indicated 100% and 96.4% U(IV) in 0.01 and 0.05 CMF U slurries, respectively. EXAFS spectra were consistent with uraninite at both uranium levels, plus additional non-uraninite U(IV) for 0.05 CMF U. One 0.05 CMF U culture slurry was found to have a lower pH and a more oxidized final iron mineral assemblage; in this case uraninite was not observed by XRD, but large (101 nm average diameter) rounded uraninite grains were observed by TEM. These grains were observed in chains or aggregates often connected by necks, in textures suggestive of biological influence. HRTEM demonstrated each grain was composed of poorly oriented, primary, 2-5 nm uraninite crystallites. Uraninite crystal growth occurred by nanoparticle aggregation, but ripening was not observed even though incubation temperatures were held at 65 °C for 20 days. Thus, previous studies of biogenic nanoparticulate uraninite short-term reactivity are likely to be representative of systems aged over a period of years. [ABSTRACT FROM AUTHOR]

Abstract: Interest in engineered metal and semiconductor nanocrystallites continues to grow due to their unique size- and shape-dependent optoelectronic, physicochemical and biological properties. Therefore identifying novel non-hazardous nanoparticle synthesis routes that address hydrophilicity, size and shape control and production costs has become a priority. In the present article we report for the first time on the efficient generation of extracellular silver sulfide (Ag2S) nanoparticles by the metal-reducing bacterium Shewanella oneidensis. The particles are reasonably monodispersed and homogeneously shaped. They are produced under ambient temperatures and pressures at high yield, 85% theoretical maximum. UV–visible and Fourier transform infrared spectroscopy, dynamic light scattering, X-ray diffraction, transmission electron microscopy and X-ray photoelectron spectroscopy measurements confirmed the formation, optical and surface properties, purity and crystallinity of the synthesized particles. Further characterization revealed that the particles consist of spheres with a mean diameter of 9±3.5nm, and are capped by a detachable protein/peptide surface coat. Toxicity assessments of these biogenic Ag2S nanoparticles on Gram-negative (Escherichia coli and S. oneidensis) and Gram-positive (Bacillus subtilis) bacterial systems, as well as eukaryotic cell lines including mouse lung epithelial (C 10) and macrophage (RAW-264.7) cells, showed that the particles were non-inhibitory and non-cytotoxic to any of these systems. Our results provide a facile, eco-friendly and economical route for the fabrication of technologically important semiconducting Ag2S nanoparticles. These particles are dispersible and biocompatible, thus providing excellent potential for use in optical imaging, electronic devices and solar cell applications. [Copyright &y& Elsevier]

Abstract: Nanocrystallites have garnered substantial interest due to their various applications, including catalysis and medical research. Consequently important aspects of synthesis related to control of shape and size through economical and non-hazardous means are desirable. Highly efficient bioreduction-based fabrication approaches that utilize microbes and/or plant extracts are poised to meet these needs. Here we show that the γ-proteobacterium Shewanella oneidensis can reduce tetrachloroaurate (III) ions to produce discrete extracellular spherical gold nanocrystallites. The particles were homogeneously shaped with multiple size distributions and produced under ambient conditions at high yield, 88% theoretical maximum. Further characterization revealed that the particles consist of spheres in the size range of ∼2–50nm, with an average size of 12±5nm. The nanoparticles were hydrophilic and resisted aggregation even after several months. Based on our experiments, the particles are likely fabricated by the aid of reducing agents present in the bacterial cell membrane and are capped by a detachable protein/peptide coat. Ultraviolet–visible and Fourier transform infrared spectroscopy, X-ray diffraction, energy dispersive X-ray spectra and transmission electron microscopy measurements confirmed the formation, surface characteristics and crystalline nature of the nanoparticles. The antibacterial activity of these gold nanoparticles was assessed using Gram-negative (Escherichia coli and S. oneidensis) and Gram-positive (Bacillus subtilis) bacterial species. Toxicity assessments showed that the particles were neither toxic nor inhibitory to any of these bacteria. [Copyright &y& Elsevier]

Production of both nano-sized particles of crystalline pure phase magnetite and magnetite substituted with Co, Ni, Cr, Mn, Zn or the rare earths for some of the Fe has been demonstrated using microbial processes. This microbial production of magnetic nanoparticles can be achieved in large quantities and at low cost. In these experiments, over 1 kg (wet weight) of Zn-substituted magnetite (nominal composition of ZnFeO) was recovered from 30 l fermentations. Transmission electron microscopy (TEM) was used to confirm that the extracellular magnetites exhibited good mono-dispersity. TEM results also showed a highly reproducible particle size and corroborated average crystallite size (ACS) of 13.1 ± 0.8 nm determined through X-ray diffraction ( N = 7) at a 99% confidence level. Based on scale-up experiments performed using a 35-l reactor, the increase in ACS reproducibility may be attributed to a combination of factors including an increase of electron donor input, availability of divalent substitution metal ions and fewer ferrous ions in the case of substituted magnetite, and increased reactor volume overcoming differences in each batch. Commercial nanometer sized magnetite (25–50 nm) may cost $500/kg. However, microbial processes are potentially capable of producing 5–90 nm pure or substituted magnetites at a fraction of the cost of traditional chemical synthesis. While there are numerous approaches for the synthesis of nanoparticles, bacterial fermentation of magnetite or metal-substituted magnetite may represent an advantageous manufacturing technology with respect to yield, reproducibility and scalable synthesis with low costs at low energy input. [ABSTRACT FROM AUTHOR]

Magnetic nanoparticles, which are unique because of both structural and functional elements, have various novel applications. The popularity and practicality of nanoparticle materials create a need for a synthesis method that produces quality particles in sizable quantities. This paper describes such a method, one that uses bacterial synthesis to create nanoparticles of magnetite. The thermophilic bacterial strain Thermoanaerobacter ethanolicus TOR-39 was incubated under anaerobic conditions at 65 °C for two weeks in aqueous solution containing Fe ions from a magnetite precursor (akaganeite). Magnetite particles formed outside of bacterial cells. We verified particle size and morphology by using dynamic light scattering, X-ray diffraction, and transmission electron microscopy. Average crystallite size was 45 nm. We characterized the magnetic properties by using a superconducting quantum interference device magnetometer; a saturation magnetization of 77 emu/g was observed at 5 K. These results are comparable to those for chemically synthesized magnetite nanoparticles. [ABSTRACT FROM AUTHOR]

Abstract: The magnetic properties of zinc ferrite (Zn-substituted magnetite, Zn y Fe1-y Fe2O4) formed by a microbial process compared favorably with chemically synthesized materials. A metal reducing bacterium, Thermoanaerobacter, strain TOR-39 was incubated with Zn x Fe1−x OOH (x=0.01, 0.1, and 0.15) precursors and produced nanoparticulate zinc ferrites. Composition and crystalline structure of the resulting zinc ferrites were verified using X-ray fluorescence, X-ray diffraction, transmission electron microscopy, and neutron diffraction. The average composition from triplicates gave a value for y of 0.02, 0.23, and 0.30 with the greatest standard deviation of 0.02. Average crystallite sizes were determined to be 67, 49, and 25nm, respectively. While crystallite size decreased with more Zn substitution, the lattice parameter and the unit cell volume showed a gradual increase in agreement with previous literature values. The magnetic properties were characterized using a superconducting quantum interference device magnetometer and were compared with values for the saturation magnetization (M s ) reported in the literature. The averaged M s values for the triplicates with the largest amount of zinc (y=0.30) gave values of 100.1, 96.5, and 69.7emu/g at temperatures of 5, 80, and 300K, respectively indicating increased magnetic properties of the bacterially synthesized zinc ferrites. [Copyright &y& Elsevier]