Search

The concern about titanium dioxide nanoparticles (TiO 2 -NPs) toxicity and their possible harmful effects on human health has increased. Their biological impact is related to some key physicochemical properties, that is, particle size, charge, crystallinity, shape, and agglomeration state. However, the understanding of the influence of such features on TiO 2 -NP toxicity remains quite limited. In this study, cytotoxicity, proinflammatory response, and oxidative stress caused by five types of TiO 2 -NPs with different physicochemical properties were investigated on A549 cells used either as monoculture or in co-culture with macrophages differentiated from the human monocytic THP-1 cells. We tailored bulk and surface TiO 2 physicochemical properties and differentiated NPs for size/specific surface area, shape, agglomeration state, and surface functionalization/charge (aminopropyltriethoxysilane). An impact on the cytotoxicity and to a lesser extent on the proinflammatory responses depending on cell type was observed, namely, smaller, large-agglomerated TiO 2 -NPs were shown to be less toxic than P25, whereas rod-shaped TiO 2 -NPs were found to be more toxic. Besides, the positively charged particle was slightly more toxic than the negatively charged one. Contrarily, TiO 2 -NPs, whatever their physicochemical properties, did not induce significant ROS production in both cell systems compared to nontreated control groups. These results may contribute to a better understanding of TiO 2 -NPs toxicity in relation with their physicochemical features.

Background: The impact of nanoparticles we are increasingly exposed to remains largely unknown. Of particular concern is the exposure of pregnant women and potential impact on fetal development. Indeed, many in vitro and in vivo animal studies have shown that nanoparticles are able to cross the placental barrier and induce toxic effects to the fetus. However, little is known in humans., Objective: The aim and originality of this study were to investigate the nanoparticle burden of amniotic fluids in pregnant women. Methods - To that purpose, 100 amniotic fluids collected for clinical purposes were used to determine the nanoparticle quantity and nature by inductively coupled plasma atomic emission spectroscopy (NAMIOTIC, ClinicalTrials.gov Identifier: NCT02720887). Results - The prevalence of patients with a substantial concentration for the essential trace elements Cu, Fe and Zn was high, while that of patients with a substantial concentration of Al, Ag, Be, Co, Cr, Ni, Si, Ti and W was relatively low (under 20 %). It was generally higher in the fraction containing nanoparticles and ions than in the fraction containing micro- and submicroparticles. No correlation was found between the nanoparticle burden and the different potential sources of exposure to nanoparticles (smoking status of the patient, living area, heating source, mode of transport, leisure, use of hygiene products and cosmetics and occupational activities)., Conclusion: Our results showing low concentrations and low prevalence of most of the assessed elements in amniotic fluids are reassuring. Further research is needed to draw firm conclusions on the developmental toxicity of engineered nanoparticles in humans but the present paper can provide a useful basis for further evaluation of the fetal toxicity of nanoparticles., Competing Interests: Declarations of Competing Interest None., (Copyright © 2020 Elsevier GmbH. All rights reserved.)

Mineralogical analyses of clinical samples have been proved useful to identify causal relationship between exposure to airborne particles and pulmonary diseases. The most striking example is asbestosis where the assessment of asbestos bodies in patient lung samples has allowed defining values specific of pathologies. However, this type of analyses only considers the micro-sized fraction of the particles, neglecting the specific impact of nano-sized particles which have been otherwise shown to be reactive and able to induce biological effects. Similarly, in nanotoxicology, the mineralogical analysis of pulmonary fluids could be used as an indicator of exposure to inhaled nanoparticles and could help investigations on the relationship between exposure to these nanoparticles and lung diseases. We designed this study first to demonstrate the technical feasibility of this approach, then to get a clear picture of the metals present, and in what form, in patient lungs and finally to determine if indeed it is worth investigating separately the micro, sub-micro and nano fractions. Broncho-alveolar lavages were recovered from 100 patients suffering from interstitial lung diseases. A protocol was specifically developed to isolate three fractions containing respectively microparticles, sub-microparticles and nanoparticles with ions. The metal content in each fraction was qualitatively and quantitatively characterized. Results showed significant differences between the three fractions in terms of metal load confirming that the separate analysis of the fractions is relevant. It also means that the assessment of the micro-sized fraction alone, as commonly done in clinical practice, only gives a partial view of the mineralogical analysis.

Background: Micrometric and nanometric particles are increasingly used in different fields and may exhibit variable toxicity levels depending on their physicochemical characteristics. The aim of this study was to determine the impact of the size parameter on cellular uptake and biological activity, working with well-characterized fluorescent particles. We focused our attention on macrophages, the main target cells of the respiratory system responsible for the phagocytosis of the particles., Methods: FITC fluorescent silica particles of variable submicronic sizes (850, 500, 250 and 150 nm) but with similar surface coating (COOH) were tailored and physico-chemically characterized. These particles were then incubated with the RAW 264.7 macrophage cell line. After microscopic observations (SEM, TEM, confocal), a quantitative evaluation of the uptake was carried out. Fluorescence detected after a quenching with trypan blue allows us to distinguish and quantify entirely engulfed fluorescent particles from those just adhering to the cell membrane. Finally, these data were compared to the in vitro toxicity assessed in terms of cell damage, inflammation and oxidative stress (evaluated by LDH release, TNF-α and ROS production respectively)., Results and Conclusion: Particles were well characterized (fluorescence, size distribution, zeta potential, agglomeration and surface groups) and easily visualized after cellular uptake using confocal and electron microscopy. The number of internalized particles was precisely evaluated. Size was found to be an important parameter regarding particles uptake and in vitro toxicity but this latter strongly depends on the particles doses employed.

Background: The use of micro- or nanometric particles is in full expansion for the development of new technologies. These particles may exhibit variable toxicity levels depending on their physicochemical characteristics. We focused our attention on macrophages (MA), the main target cells of the respiratory system responsible for the phagocytosis of the particles. The quantification of the amount of phagocytosed particles seems to be a major element for a better knowledge of toxicity mechanisms. The aim of this study was to develop a quantitative evaluation of uptake using both flow cytometry (FCM) and confocal microscopy to distinguish entirely engulfed fluorescent microsized particles from those just adherent to the cell membrane and to compare these data to in vitro toxicity assessments., Methods: Fluorescent particles of variable and well-characterised sizes and surface coatings were incubated with MA (RAW 264.7 cell line). Analyses were performed using confocal microscopy and FCM. The biological toxicity of the particles was evaluated [lactate dehydrogenase (LDH) release, tumor necrosis factor (TNF)-α, and reactive oxygen species (ROS) production]., Results and Conclusion: Confocal imaging allowed visualization of entirely engulfed beads. The amount of phagocytic cells was greater for carboxylate 2-µm beads (49 ± 11%) than for amine 1-µm beads (18 ± 5%). Similarly, side scatter geometric means, reflecting cellular complexity, were 446 ± 7 and 139 ± 12, respectively. These results confirm that the phagocytosis level highly depends on the size and surface chemical groups of the particles. Only TNF-α and global ROS production varied significantly after 24-h incubation. There was no effect on LDH and H(2)O(2) production.

Biomimetic nanoparticles based on polysaccharides-poly(alkylcyanoacrylates) copolymers were initially developed in view of drug delivery. Core-shell nanoparticles covered with a sufficiently long brush of polysaccharides were shown to be very low complement activators and have the potential for long circulation times in the bloodstream. Such nanoparticles bearing haemoglobin were envisaged as potential red cell substitutes. Different core-shell nanoparticles with a brush shell made of dextran, dextran-sulphate, or heparin were prepared and haemoglobin (Hb) could be adsorbed on their surface. Benzene tetracarboxylic acid (BTCA) was used as a coupling agent for Hb to dextran-coated nanoparticles; the Hb loading capacity of the dextran nanoparticles showed a 9.3 fold increased. The coupled Hb maintained the allosteric properties of free Hb. While modification of nanoparticles by BTCA slightly increased complement activation, the further addition of Hb totally reversed this effect providing Hb-loaded nanoparticles with a very low level of complement activation. Such nanoparticles could be a suitable alternative to haemoglobin solutions in the development of a blood substitute., (Copyright 2010 Elsevier Ltd. All rights reserved.)

Progress in developing a blood substitute is aided by new biotechnologies and a better understanding of the circulatory system. For Hb based solutions, there is still a debate over the best set of fundamental parameters concerning the oxygen affinity which is correlated with the oxidation rate, the cooperativity, the transporter size, and of course the final source of material. Genetic engineering methods have helped discover novel globins, but not yet the quantity necessary for the high demand of blood transfusions. The expanding database of globin properties has indicated that certain individual parameters are coupled, such as the oxygen affinity and the oxidation rate, indicating that one must accept a compromise of the best parameters. After a general introduction of these basic criteria, we will focus on two strategies concerning the size of the oxygen transporter: Hb octamers, and Hb integrated within a nanoparticle.

Polymer nanoparticles are designed as nanovehicles to carry drugs in the body in a controlled manner increasing the concentration of the biologically active substance in the diseased organs and cells. The safety and biocompatibility of these nanosystems are those of the many properties that nanoparticles must meet to be used in vivo. Here we show that the cytotoxicity profile of poly(isobutylcyanoacrylate) (PIBCA) nanoparticles is affected by the way the nanosystems were produced and by the design of their surface. It was found that the tolerance of PIBCA nanoparticles by cells could be improved up to 100-fold by coating their surface with polysaccharides and haemoglobin.