Search

An ionomeric, leathery thermoplastic with high mechanical strength is prepared by a new thermal processing method from a soft, melt-processable rubber. Compositions made by incorporation of equal-mass lignin, a renewable oligomeric feedstock, in an acrylonitrile-butadiene rubber often yield weak rubbers with large lignin domains (1-2 µm). The addition of zinc chloride (ZnCl 2 ) in such a composition based on sinapyl alcohol-rich lignin during a solvent-free synthesis induces a strong interfacial crosslinking between lignin and rubber phases. This compositional modification results in finely interspersed lignin domains (<100 nm) that essentially reinforce the rubbery matrix with a 10-22 °C rise in the glassy-to-rubbery transition temperature. The ion-modified polymer blends also show improved materials properties, like a 100% increase in ultimate tensile strength and an order of magnitude rise in Young's modulus. Coarse-grained molecular dynamics (MD) simulations verify the morphology and dynamics of the ionomeric material. The computed result also confirms that the ionomers have glassy characteristics., (© 2019 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

The structural and dynamical properties of polymer nanocomposites are investigated using stochastic molecular dynamics simulations. For spherical nanoparticles dispersed in a polymer matrix, the results indicate that the polymer-nanoparticle interaction strength and the overall system temperature are primarily responsible for the type of dispersed state (clustering and homogeneous dispersion) achieved. A systematic study probing temperature, polymerization, and polymer-nanoparticle and nanoparticle-nanoparticle interaction strengths has been performed. In this paper, however, we focus the discussion on the results for varying polymer-nanoparticle interaction strengths at different temperatures. By examining the structure and dynamics, we show that there are two kinds of “clustering transitions:” one due to thermodynamic and another due to the dynamical response of the system. From these results, a representative phase diagram is developed that captures the entire simulated space and allows the easy identification of the highly dispersed and the clustered states. [ABSTRACT FROM AUTHOR]

The future flexible sensor technology will require low-temperature, fast processing 3D printing techniques that will rely heavily on the quality of nanoparticle (NP) Ink. Electrical conductivity has been found to decrease in majority of the 3D printed electronic wires. Herein we report a fundamental understanding in drop of electrical conductivity in processed silver (Ag) line wire, generally found in Ag-nanoparticle Ink, using large-scale atomistic molecular dynamics (MD) simulations of sintering of five different sizes of Ag NPs. To preserve the high conductivity of pure silver wires, the integrity of the pristine face-centered cubic (FCC) crystalline structure must be retained in the processed line wires. Simulations show that the pristine Ag FCC structures of the nanoparticles are not recovered after melting and resolidification, instead, the resolidified material is paracrystaline. The breakdown of pristine FCC structures might be the cause of the drop in conductivity of processed Ag wires. Simulation results suggest that the intermediate size nanoparticles retain highest percentage of the pristine silver face-centered cubic (FCC) structure after pulse treatments. Our results show that the most promising Ag-Ink should contain smaller to medium size silver NPs that can retain FCC structure after 3D printing of the Ag-Ink. • MD simulation of sintering of two silver nanoparticles (NP) of sizes 10nm to 100nm show breakdown of pristine silver crystalline structure. • Smaller NPs melts at lower temperature than pristine silver due nanoscale confinement effect on melting. • Breakdown of pure silver FCC structure results in undesirable conductivity drop, not recommended for 3D printed electronics. [ABSTRACT FROM AUTHOR]