Search

Context: The process of vibrating-mesh nebulization is affected by sample physicochemical properties. Exemplary, electrolyte supplementation of diverse formulations facilitated the delivery of adequate aerosols for deep lung deposition., Objective: This study addressed the impact of storage conditions of poly(lactide-co-glycolide) nanosuspension on aerosol properties when nebulized by the eFlow®rapid., Materials and Methods: First, purified nanosuspensions were supplemented with electrolytes (i.e. sodium chloride, lactic and glycolic acid). Second, the degradable nanoparticles (NP) were incubated at different temperatures (i.e. 4, 22 and 36 °C) for up to two weeks. The effect of formulation supplementation and storage on aerosol characteristics was studied by laser diffraction and correlated with the sample conductivity., Results and Discussion: Nebulization of purified nanosuspensions resulted in droplet diameters of >7.0 µm. However, electrolyte supplementation and storage, which led to an increase in sample conductivity (>10-20 µS/cm), were capable of providing smaller droplet diameters during vibrating-mesh nebulization (≤5.0 µm). No relevant change of NP properties (i.e. size, morphology, remaining mass and molecular weight of the employed polymer) was observed when incubated at 22 °C for two weeks., Conclusion: Sample aging is an alternative to electrolyte supplementation in order to ameliorate the aerosol characteristics of degradable NP formulations when nebulized by vibrating-mesh technology.

Numerous studies have addressed the controlled pulmonary drug delivery properties of colloidal particles. However, only scant information on the potential of spray-drying for submicron particle preparation is available. By exploiting the advantages of spray-drying, the characteristics of submicron particles can be optimized to meet the requirements necessary for lung application. Submicron particles were prepared from organic poly(d,l-lactide-co-glycolide) (PLGA) solutions, and composite particles were spray-dried from aqueous PLGA nanosuspensions. The feed concentration, as well as the spray-mesh diameter influenced the resulting particle sizes. Nanoparticles were virtually unaffected after spray-drying. The aerodynamic characteristics of both particle species revealed aerosol particle sizes suitable for deposition in the deep lungs (≤4μm). While the entrapped drug was released within ~90min from the composite particles, extensive drug retardation (~480min) was observed for PLGA particles spray-dried from organic solution. These results suggest that nanospray-drying is a convenient method to prepare submicron, controlled drug delivery vehicles useful for pulmonary application potentially allowing access to alveolar tissue., (Copyright © 2011. Published by Elsevier B.V.)

Biodegradable nanoparticles have gained tremendous attraction as carriers for controlled drug delivery to the lung. Despite numerous advances in the field, e.g. development of suitable methods for pulmonary administration of polymeric nanoparticles, a sufficient association of the therapeutic agent with the carrier system as well as drug release in a controlled fashion remain considerable challenges. Hence, this study examines the optimization of biodegradable sildenafil-loaded nanoparticle formulations intended for aerosol treatment of pulmonary hypertension. A factorial design analysis was employed to identify the important experimental factors involved in the preparation of nanoparticles by the solvent evaporation technique. The effect of tailored charge-modified branched polyesters on drug loading and in vitro drug release from nanoparticles was also evaluated. Moreover, colloidal stability of obtained nanoparticles was assessed, and stabilization of nanoparticles by lyophilization was accomplished without additional excipients. Essential experimental factors were identified and optimized to allow the preparation of nanoparticles composed of linear polyesters with a sildenafil content of ~5 wt.%. The in vitro drug release profile from these nanoparticles demonstrated a sustained release of sildenafil over ~90 min. Application of charge-modified branched polyesters enhanced the drug content in nanoparticles and drug release profile, according to the charge-density present in the employed polymer. Accordingly an increase in drug loading by a factor of ~1.4, a prolonged drug release profile from nanoparticles over ~240 min was achieved. Sildenafil release from nanoparticles made of linear and charge-modified branched polyesters was governed by a diffusion process. The obtained drug diffusion coefficients were decreased as the charge-density present in the applied polymer was increased, which promotes the strategy to improve drug loading and release rates by electrostatic interactions between polymer and drug. In addition, nanoparticles showed high colloidal stability in different media of importance for pulmonary application and were successfully stabilized by lyophilization. In conclusion, optimization of the nanoparticle preparation process together with the application of tailored polymeric materials facilitated the synthesis of promising drug carriers for sildenafil that permit a novel treatment modality for severe pulmonary hypertension., (Copyright © 2011 Elsevier B.V. All rights reserved.)

Polymeric nanoparticles meet the increasing interest for drug delivery applications and hold great promise to improve controlled drug delivery to the lung. Here, we present a series of investigations that were carried out to understand the impact of formulation variables on the nebulization performance of novel biodegradable sildenafil-loaded nanoparticles designed for targeted aerosol therapy of life-threatening pulmonary arterial hypertension. Narrowly distributed poly(D,L-lactide-co-glycolide) nanoparticles (size: ∼200 nm) were prepared by a solvent evaporation technique using poly(vinyl alcohol) (PVA) as stabilizer. The aerodynamic and output characteristics using the Aeroneb Pro nebulizer correlated well with the dynamic viscosity of the employed fluids for nebulization. The nebulization performance was mainly affected by the amount of employed stabilizer, rather than by the applied nanoparticle concentration. Nanoparticles revealed physical stability against forces generated during aerosolization, what is attributed to the adsorbed PVA layer around the nanoparticles. Sildenafil was successfully encapsulated into nanoparticles (encapsulation efficiency: ∼80%). Size, size distribution and sildenafil content of nanoparticles were not affected by nebulization and the in vitro drug release profile demonstrated a sustained sildenafil release over ∼120 min. The current study suggests that the prepared sildenafil-loaded nanoparticles are a promising pharmaceutical for the therapy of pulmonary arterial hypertension., (Copyright © 2011 Elsevier B.V. All rights reserved.)

Nanoparticulate drug carriers have been proposed for the targeted and controlled release of pharmaceuticals to the lung. However, inhaled particles may adversely affect the biophysical properties of pulmonary surfactant. This study examines the influence of polymeric nanoparticles with distinct physicochemical properties on the adsorption and dynamic surface tension lowering properties of pulmonary surfactant. Nanoparticles had a mean size of 100 nm with narrow size distributions. Although poly(styrene) and poly(D,L-lactide-co-glycolide) nanoparticles revealed a dose-dependent influence on biophysics of pulmonary surfactant, positively-charged nanoparticles made from poly(butyl methacrylate-co-(2-dimethylaminoethyl) methacrylate-co-methyl methacrylate) showed no effect. This behavior is attributed to the differences in ζ-potential and surface hydrophobicity, which in turn involves an altered adsorption pattern of the positively charged surfactant proteins to the nanoparticles. This study suggests that polymeric nanoparticles do not substantially affect the biophysical properties of pulmonary surfactant and may be a viable drug-delivery vehicle for the inhalative treatment of respiratory diseases., From the Clinical Editor: Inhaled nanoparticulate drug carriers may adversely affect the biophysical properties of pulmonary surfactant. In this study the influence of polymeric nanoparticles was characterized from this standpoint, with the conclusion that polymeric nanoparticles do not substantially affect the biophysical properties of pulmonary surfactant and may be viable drug-delivery vehicles for inhalational treatment., (Copyright © 2011 Elsevier Inc. All rights reserved.)

The objective of this study was to develop highly efficient ternary nanocomposites for aerosol gene therapy consisting of a biodegradable polymer core, poly[vinyl-3-(diethylamino)propylcarbamate-co-vinyl acetate-co-vinyl alcohol]-graft-poly(d,l-lactide-co-glycolide), pDNA and a third component to alter surface properties, physicochemical characteristics and biological activity. The effects of the surface altering components lung surfactant, carboxymethyl cellulose (CMC) or poloxamer on nanocomposites were characterized with regard to size, zeta potential, cytotoxicity, biological activity and surface properties. With increasing concentrations of lung surfactant, CMC or poloxamer, sizes of nanocomposites increased. AFM nanoindentation measurements showed a significant increase in adhesion forces of nanocomposites compared to pure nanoparticles. Zeta potential values, cytotoxicity and intracellular uptake demonstrated a strong dependency on the surface altering component. While an excess of CMC led to a decreased uptake into cells due to the negative zeta potential, nanocomposites with lung surfactant displayed enhanced intracellular uptake. Transfection efficiency of nanocomposites with lung surfactant was 12-fold higher compared to pure nanoparticles and 30-fold higher compared to polyethylenimine in lung cells and could also be maintained after nebulization. Ternary nanocomposites prepared with lung surfactant proved to be a potent pulmonary gene delivery vector due to its high stability during aerosolization with a vibrating mesh nebulizer and favourable biological activity.

The use of colloidal carrier systems for pulmonary drug delivery is an emerging field of interest in nanomedicine. The objective of this study was to compare the pulmonary absorption and distribution characteristics of the hydrophilic model drug 5(6)-carboxyfluorescein (CF) after aerosolization as solution or entrapped into nanoparticles in an isolated rabbit lung model (IPL). CF-nanoparticles were prepared from a new class of biocompatible, fast degrading, branched polyesters by a modified solvent displacement method. Physicochemical properties, morphology, encapsulation efficiency, in vitro drug release, stability of nanoparticles to nebulization, aerosol characteristics as well as pulmonary dye absorption and distribution profiles after nebulization in an IPL were investigated. CF-nanoparticles were spherical in shape with a mean particle size of 195.3+/-7.1nm, a polydispersity index of 0.225+/-0.017 and a zeta-potential of -28.3+/-0.3mV. Encapsulation efficiencies of CF were as high as about 60% (drug loading of 3% (w/w)); 90% of the entrapped CF were released during the first 50min in vitro. Nanoparticle characteristics were not significantly affected by the aerosolization process utilizing a vibrating mesh nebulizer. After deposition of equal amounts of CF in the IPL, less CF was detected in the perfusate for CF-nanoparticles (plateau concentration 9.2+/-2.4ng/ml) when compared to CF aerosolized from solution (17.7+/-0.8ng/ml). In conclusion, the data suggest that inhalative delivery of biodegradable nanoparticles may be a viable approach for pulmonary drug delivery. Moreover, a targeting effect to the lung tissue is claimed.

Purpose: This study investigates the feasibility of freeze-drying aerosolizable nano-carriers (NC) by the use of different lyoprotective agents (LPA) and the influence of the freeze-drying on the physicochemical properties of these nano-carriers and on their aerosolization., Methods: Nano-carriers were prepared from fast-degrading polymers, DMAPA(24)-PVAL-g-PLGA(1:7.5) and DEAPA(26)-PVAL-g-PLGA(1:10), and freeze-dried using increasing concentrations of different LPA. The hydrodynamic diameter, zeta potential and morphology (atomic force microscopy) of NC were characterized before and after freeze-drying. The ability to aerosolize using a jet nebulizer and an electronic micro-pump nebulizer was also investigated., Results: Freeze-drying with LPA led to a decreased zeta-potential of NC and changes in size about 20 nm without alteration in shape, whereas lyophilizates without LPA were found to aggregate. While freeze-drying was positively affected by increasing concentrations, it was not influenced by the type of LPA. The possibility for aerosolization was not influenced by any LPA., Conclusions: Freeze-drying with LPA is a suitable method to physically stabilize fast-degrading NC from aqueous suspensions without influencing the aerosolizability.

Despite the potent clinical efficacy of linezolid (LNZ) against drug-resistant tuberculosis, its safety and tolerability remain of major concern. Our objective is to develop antitubercular inhalable LNZ nano-embedded microparticles. In this context, LNZ incorporated in non-structured lipid carriers (NLCs) was characterized in terms of colloidal, morphological, thermal, and release profiles. The potential of LNZ-NLCs to cross mucosal barriers and invade alveolar macrophages (AM, MH-S cells) was appraised. In vivo proof of concept was accomplished via orotracheal administration to mice. Respirable microparticles prepared by spray drying NLCs with diluents were assessed for their size, shape, flowability, aerosolization performance, and lung deposition pattern. NLCs (809-827 nm in size, zeta potential - 37.4 to - 58.9 mV) ensued 19% LNZ loading and pH-independent sustained release. Penetration studies revealed 73% LNZ crossing mucus within 1 h. Meanwhile, viability assay on A549 cells ensured an IC50 of 1.2 and 0.32 mg/mL for plain and LNZ-NLCs, respectively. CLSM confirmed phagocytosis of NLCs by MH-S macrophages, while H&E staining demonstrated NLC accumulation in murine AM in vivo with no signs of histopathological/biochemical changes. Bronchoalveolar lavage showed significantly low levels of LDH and total proteins (TP) for LNZ-NLCs highlighting their superior safety. Respirable microparticles embedding LNZ-NLCs ensured excellent aerosolization (MMAD 2 μm, FPF 93%) denoting perfect alveolar deposition. The developed inhalation therapy provided sustained LNZ release, mucus penetrability, potential safety in therapeutic doses, in vitro and in vivo macrophage targetability, and preferential deposition in the deep lung. Overall positive outcomes rely on reduced dose, dosing frequency, and per se superior safety circumventing systemic-associated life-threatening side effects. Graphical abstract.

Nanoparticles (NPs) have shown significant potential for pulmonary administration of therapeutics for the treatment of chronic lung diseases in a localized and sustained manner. Nebulization is a suitable method of NP delivery, particularly in patients whose ability to breathe is impaired due to lung diseases. However, there are limited studies evaluating the physicochemical properties of NPs after they are passed through a nebulizer. High shear stress generated during nebulization could potentially affect the surface properties of NPs, resulting in the loss of encapsulated drugs and alteration in the release kinetics. Herein, we thoroughly examined the physicochemical properties as well as the therapeutic effectiveness of Infasurf lung surfactant (IFS)-coated PLGA NPs previously developed by us after passing through a commercial Aeroneb® vibrating-mesh nebulizer. Nebulization did not alter the size, surface charge, IFS coating and bi-phasic release pattern exhibited by the NPs. However, there was a temporary reduction in the initial release of encapsulated therapeutics in the nebulized compared to non-nebulized NPs. This underscores the importance of evaluating the drug release kinetics of NPs using the inhalation method of choice to ensure suitability for the intended medical application. The cellular uptake studies demonstrated that both nebulized and non-nebulized NPs were less readily taken up by alveolar macrophages compared to lung cancer cells, confirming the IFS coating retention. Overall, nebulization did not significantly compromise the physicochemical properties as well as therapeutic efficacy of the prepared nanotherapeutics. [ABSTRACT FROM AUTHOR]

Ischemic stroke is a leading cause of death and disability in the world. At present, reperfusion therapy and neuroprotective therapy, as guidelines for identifying effective and adjuvant treatment methods, are limited by treatment time windows, drug bioavailability, and side effects. Nanomaterial-based drug delivery systems have the characteristics of extending half-life, increasing bioavailability, targeting drug delivery, controllable drug release, and low toxicity, thus being used in the treatment of ischemic stroke to increase the therapeutic effects of drugs. Therefore, this review provides a comprehensive overview of nanomaterial-based drug delivery systems from nanocarriers, targeting ligands and stimulus factors of drug release, aiming to find the best combination of nanomaterial-based drug delivery systems for ischemic stroke. Finally, future research areas on nanomaterial-based drug delivery systems in ischemic stroke and the implications of the current knowledge for the development of novel treatment for ischemic stroke were identified. [ABSTRACT FROM AUTHOR]

Nanoparticles are rising worries because of recent reports about potential toxicity amid the incorporation of these emerging materials into consumer products, and industrial and scientific applications. New developments in the automotive industry are incorporating novel materials, which have increased the emission of nanoparticles into the atmosphere. To overcome the difficulty of detecting and characterizing atmospheric nanoparticles, alternative methods have been proposed, just as the indirect detection and characterization with bioindicators. We report the use of Taraxacum officinale as a sentinel organism to describe the effects of atmospheric nanostructured pollutants. ZnO and CuO nanoparticles (ZnO-NPs, CuO-NPs) were selected for this study, as they are two of the most present nanomaterials in the emerging automotive industry. The physiological effect on Taraxacum officinale exposure to ZnO-NPs and CuO-NPs was evaluated through growth rate, and total chlorophyll content; and comet assay was performed to evaluate the DNA damage. The exposure of plants was made by nebulizing dispersions of the nanoparticles. The exposure to ZnO-NPs presented the maximum DNA damage at a concentration of 100 mg/L. The DNA damage by both studied nanoparticles showed a significant difference against its bulk counterparts. Scanning electron microscopy (SEM) micrographs showed an accumulation of nanoparticles near the stomata. The study demonstrated the feasibility of T. officinale as a bioindicator of air-related nanoparticles toxicity, and the high sensitivity of the comet assay for this approach. [ABSTRACT FROM AUTHOR]

Parkinson's disease (PD) significantly affects patients' quality of life and represents a high economic burden for health systems. Given the lack of safe and effective treatments for PD, drug repositioning seeks to offer new medication alternatives, reducing research time and costs compared to the traditional drug development strategy. This review aimed to collect evidence of drugs proposed as candidates to be reused in PD and identify those with the potential to be reformulated into nanocarriers to optimize future repositioning trials. We conducted a detailed search in PubMed, Web of Science, and Scopus from January 2015 at the end of 2021, with the descriptors "Parkinson's disease" and "drug repositioning" or "drug repurposing". We identified 28 drugs as potential candidates, and six of them were found in repositioning clinical trials for PD. However, a limitation of many of these drugs to achieve therapeutic success is their inability to cross the blood–brain barrier (BBB), as is the case with nilotinib, which has shown promising outcomes in clinical trials. We suggest reformulating these drugs in biodegradable nanoparticles (NPs) based on lipids and polymers to perform future trials. As a complementary strategy, we propose functionalizing the NPs surface by adding materials to the surface layer. Among other advantages, functionalization can promote efficient crossing through the BBB and improve the affinity of NPs towards certain brain regions. The main parameters to consider for the design of NPs targeting the central nervous system are highlighted, such as size, PDI, morphology, drug load, and Z potential. Finally, current advances in the use of NPs for Parkinson's disease are cited. [ABSTRACT FROM AUTHOR]

Polymeric nanoparticles' drug delivery systems represent a promising platform for targeted controlled release since they are capable of improving the bioavailability and tissue localization of drugs compared to traditional means of administration. Investigation of key parameters of nanoparticle preparation and their impact on performance, such as size, drug loading, and sustained release, is critical to understanding the synthesis parameters surrounding a given nanoparticle formulation. This comprehensive and systematic study reports for the first time and focuses on the development and characterization of formoterol polymeric nanoparticles that have potential application in a variety of acute and chronic diseases. Nanoparticles were prepared by a variety of solvent emulsion methods with varying modifications to the polymer and emulsion system with the aim of increasing drug loading and tuning particle size for renal localization and drug delivery. Maximal drug loading was achieved by amine modification of polyethylene glycol (PEG) conjugated to the poly(lactic-co-glycolic acid) (PLGA) backbone. The resulting formoterol PEGylated PLGA polymeric nanoparticles were successfully lyophilized without compromising size distribution by using either sucrose or trehalose as cryoprotectants. The physicochemical characteristics of the nanoparticles were examined comprehensively, including surface morphology, solid-state transitions, crystallinity, and residual water content. In vitro formoterol drug release characteristics from the PEGylated PLGA polymeric nanoparticles were also investigated as a function of both polymer and emulsion parameter selection, and release kinetics modeling was successfully applied. [ABSTRACT FROM AUTHOR]

Lung diseases, including COVID-19 and lung cancers, is a huge threat to human health. However, for the treatment and diagnosis of various lung diseases, such as pneumonia, asthma, cancer, and pulmonary tuberculosis, are becoming increasingly challenging. Currently, several types of treatments and/or diagnostic methods are used to treat lung diseases; however, the occurrence of adverse reactions to chemotherapy, drug-resistant bacteria, side effects that can be significantly toxic, and poor drug delivery necessitates the development of more promising treatments. Nanotechnology, as an emerging technology, has been extensively studied in medicine. Several studies have shown that nano-delivery systems can significantly enhance the targeting of drug delivery. When compared to traditional delivery methods, several nanoparticle delivery strategies are used to improve the detection methods and drug treatment efficacy. Transporting nanoparticles to the lungs, loading appropriate therapeutic drugs, and the incorporation of intelligent functions to overcome various lung barriers have broad prospects as they can aid in locating target tissues and can enhance the therapeutic effect while minimizing systemic side effects. In addition, as a new and highly contagious respiratory infection disease, COVID-19 is spreading worldwide. However, there is no specific drug for COVID-19. Clinical trials are being conducted in several countries to develop antiviral drugs or vaccines. In recent years, nanotechnology has provided a feasible platform for improving the diagnosis and treatment of diseases, nanotechnology-based strategies may have broad prospects in the diagnosis and treatment of COVID-19. This article reviews the latest developments in nanotechnology drug delivery strategies in the lungs in recent years and studies the clinical application value of nanomedicine in the drug delivery strategy pertaining to the lung. [ABSTRACT FROM AUTHOR]

Background: Titanium dioxide nanoparticles (TiO2 NPs) have a wide range of applications in several industrial and biomedical domains. Based on the evidence, the workers exposed to inhaled nanosized TiO2 powder are more susceptible to the risks of developing respiratory diseases. Accordingly, this issue has increasingly attracted the researchers' interest in understanding the consequences of TiO2 NPs exposure. Regarding this, the present study was conducted to analyze the local effects of TiO2 NPs on allergic airway inflammation and their uptake in a mouse model of ovalbumin (OVA)-induced allergic airway inflammation.Methods: For the purpose of the study, female BALB/c mice with or without asthma were intranasally administered with TiO2 NPs. The mice were subjected to histological assessment, lung function testing, scanning electron microscopy (SEM), inductively coupled plasma mass spectrometry (ICP-MS), and NP uptake measurement. In addition, T helper (Th) 1/Th2 cytokines were evaluated in the lung homogenate using the enzyme-linked immunosorbent assay.Results: According to the results, the mice receiving OVA alone or OVA plus TiO2 NPs showed eosinophilic infiltrates and mucus overproduction in the lung tissues, compared to the controls. Furthermore, a significant elevation was observed in the circulating Th2 cytokines, including interleukin (IL)-4, IL-5, and IL-13 after NP exposure. The TiO2 NPs were taken up by alveolar macrophages at different time points. As the results of the SEM and ICP-MS indicated, TiO2 NPs were present in most of the organs in both asthmatic and non-asthmatic mice.Conclusion: Based on the findings of the current study, intranasally or inhalation exposure to high-dose nanosized TiO2 particles appears to exacerbate the allergic airway inflammation and lead to systemic uptake in extrapulmonary organs. These results indicate the very important need to investigate the upper limit of intranasally or inhalation exposure to nanosized TiO2 particles in occupational and environmental health policy. [ABSTRACT FROM AUTHOR]

Innovative approaches in nanoparticle design have facilitated the creation of new formulations of nanoparticles that are capable of selectively calibrating the immune response. These nanomaterials may be engineered to interact with specific cellular and molecular targets. Recent advancements in nanoparticle synthesis have enabled surface functionalization of particles that mimic the diversity of ligands on the cell surface. Platforms synthesized using these design principles, called "biomimetic" nanoparticles, have achieved increasingly sophisticated targeting specificity and cellular trafficking capabilities. This holds great promise for next generation therapies that seek to achieve immune tolerance. In this review, we discuss the importance of physical design parameters including size, shape, and biomimetic surface functionalization, on the biodistribution, safety and efficacy of biologic nanoparticles. We will also explore potential applications for immune tolerance for organ or stem cell transplantation. [ABSTRACT FROM AUTHOR]

In the present study, febuxostat (FBX)-loaded PEG-coated PLGA nanoparticles (FBX–PLGA–PEG) were developed and its anticancer activity on lung cancer cells was evaluated. FBX–PLGA–PEG were prepared by nanoprecipitation technique and characterized for particle size, size distribution, entrapment efficiency, and in vitro drug release study. The optimized formulations were used to evaluate cell viability, apoptosis, cell cycle, and caspase activity in A549 lung cancer cells. The optimized formulation showed spherical particle with average particle size of 180 ± 4.72 nm, particle-size distribution 0.223 ± 0.003, entrapment efficiency (70 ± 2.56%), and drug release (99.1 ± 2.33%) at 12 h. MTT cytotoxicity assay showed better cytotoxic potential of FBX-NPs than FBX solution against NSCLC A549 cells. The lower IC50 of FBX-NP (52.62 ± 2.52 µg/mL) compared to FBX (68.0 ± 4.12 µg/mL) are suggestive of a potential cytotoxic effect of nano-formulation compared to the drug itself. Furthermore, flow cytometry analysis showed significantly higher percentage of total apoptotic cells in FBX-NPs (10.38 ± 1.57%) as compared to FBX solution (2.76 ± 0.17%) showed strong proapoptotic potential of FBX nano-formulation. The increased caspase activity and percent of cells at G2/M phase of cell cycle increased for FBX nanoparticles were more effective than FBX solution in increasing caspase activity and percent of cells at G2/M phase of cell cycle. Our studies with FBX nanoparticles exhibited promising outcome which could be used as a strategies to combat lung cancer. [ABSTRACT FROM AUTHOR]

Modified nanoparticles (NPs) can interact with the immune system by causing its activation to fight tumors or for vaccination. During this activation, dendritic cells (DCs) are effective in generating robust immune response. However, the effect of nanomaterials on dendritic cell (DC) maturation, and the associated adjuvant effect, should be assessed as a novel biocompatibility criteria for biomaterials since immune consequences may constitute potential complications in nanomedicine. Among emerging biomaterials, poly(lactic-co-glycolic acid) NPs (PLGA NPs) are widely explored for various applications in which the degree of desired adjuvant effect may vary. As contradictory results are reported regarding their effects on DCs, we aimed at clarifying this point with particular emphasis on the relative impact of particle surface properties. To that end, NP uptake and effects on the viability, phenotype, and secretory activity of DC primary cultures. Intracellular signaling pathways were explored and evaluated. Immature human and murine DCs were exposed to cationic, neutral, or anionic PLGA NPs. Particle uptake was assessed by both confocal microscopy and flow cytometry. Cell viability was then evaluated prior to the study of maturation by examination of both surface marker expression and cytokine release. Our results demonstrate that PLGA NPs are rapidly engulfed by DCs and do not exert cytotoxic effects. However, upon exposure to PLGA NPs, DCs showed phenotypes and cytokine secretion profiles consistent with maturation which resulted, at least in part, from the transient intracellular activation of mitogen-activated protein kinases (MAPKs). Interestingly, NP-specific stimulation patterns were observed since NP surface properties had a sensible influence on the various parameters measured. [ABSTRACT FROM AUTHOR]

Nanoparticles made of biodegradable polymers have outstanding merits as a drug delivery system. Polysaccharide‐based nanoparticles have been well explored because of their safety, stability, biocompatibility, biodegradability and hydrophilicity. The present review emphasizes the efforts articulated to improve polysaccharide‐based nanoparticles as drug delivery tool for effective therapy and site‐specific targeting of mainly anticancer agents. This review updates reports of recent research on polysaccharides‐based systems particularly chitosan, alginate, cyclodextrins, hyaluronic acid, pullulan, dextran and their combinations with potential applications. [ABSTRACT FROM AUTHOR]

Pulmonary arterial hypertension (PAH) is a devastating and fatal chronic lung disease. While current pharmacotherapies have improved patient quality of life, PAH drugs suffer from limitations in the form of short-term pharmacokinetics, instability, and poor organ specificity. Traditionally, nanotechnology-based delivery strategies have proven advantageous at increasing both circulation lifetimes of chemotherapeutics and accumulation in tumors due to enhanced permeability through fenestrated vasculature. Importantly, increased nanoparticle (NP) accumulation in diseased tissues has been observed pre-clinically in pathologies characterized by endothelial dysfunction and remodeled vasculature, including myocardial infarction and heart failure. Recently, this phenomenon has also been observed in preclinical models of PAH, leading to the exploration of NP-based drug delivery as a therapeutic modality in PAH. Herein, we discussed the advantages of NPs for efficacious treatment of PAH, including heightened therapeutic delivery to diseased lungs for increased drug bioavailability, as well as highlighted innovative nanotherapeutic approaches for PAH. [ABSTRACT FROM AUTHOR]

Melanoma is the most aggressive and lethal type of skin cancer, with a poor prognosis because of the potential for metastatic spread. The aim was to develop innovative powder formulations for the treatment of metastatic melanoma based on micro- and nanocarriers containing 5-fluorouracil (5FU) for pulmonary administration, aiming at local and systemic action. Therefore, two innovative inhalable powder formulations were produced by spray-drying using chondroitin sulfate as a structuring polymer: (a) 5FU nanoparticles obtained by piezoelectric atomization (5FU-NS) and (b) 5FU microparticles of the mucoadhesive agent Methocel™ F4M for sustained release produced by conventional spray drying (5FU-MS). The physicochemical and aerodynamic were evaluated in vitro for both systems, proving to be attractive for pulmonary delivery. The theoretical aerodynamic diameters obtained were 0.322 ± 0.07 μm (5FU-NS) and 1.138 ± 0.54 μm (5FU-MS). The fraction of respirable particles (FR%) were 76.84 ± 0.07% (5FU-NS) and 55.01 ± 2.91% (5FU-MS). The in vitro mucoadhesive properties exhibited significant adhesion efficiency in the presence of Methocel™F4M. 5FU-MS and 5FU-NS were tested for their cytotoxic action on melanoma cancer cells (A2058 and A375) and both showed a cytotoxic effect similar to 5FU pure at concentrations of 4.3 and 1.7-fold lower, respectively. [ABSTRACT FROM AUTHOR]

Bosentan is an endothelin receptor antagonist (ERA) prescribed for patients with pulmonary arterial hypertension (PAH). The oral delivery of bosentan possesses several drawbacks such as low bioavailability (about 50%), short duration of action, frequent administration, hepatotoxicity and systemic hypotension. The pulmonary administration would circumvent the pre-systemic metabolism thus improving the bioavailability and avoids the systemic adverse effects of oral bosentan. However, the short duration of action and the frequent administration are the major drawbacks of inhalation therapy. Thus, the aim of this work is to explore the potential of respirable controlled release polymeric colloid (RCRPC) for effective, safe and sustained pulmonary delivery of bosentan. Central composite design was adopted to study the influence of formulation and process variables on nanoparticles properties. The particle size, polydispersity index (PDI), entrapment efficiency (EE) andin vitrobosentan released were selected as dependent variables. The optimized RCRPC showed particle size of 420 nm, PDI of 0.39, EE of 60.5% and sustained release pattern where only 31.0% was released after 16 h. Thein vitronebulization of RCRPC indicated that PLGA nanoparticles could be incorporated into respirable nebulized droplets better than drug solution. Pharmacokinetics and histopathological examination were determined after intratracheal administration of the developed RCRPC to male albino rats compared to the oral bosentan suspension. Results revealed the great improvement of bioavailability (12.71 folds) and sustained vasodilation effect on the pulmonary blood vessels (more than 12 h). Bosentan-loaded RCRPC administered via the pulmonary route may therefore constitute an advance in the management of PAH. [ABSTRACT FROM AUTHOR]

Context: Administration of sildenafil citrate (SC) is considered as a strategy in the treatment of pulmonary hypertension. Objective: This study reports production of the inhalable microparticles containing SC-loaded poly(lactide-co-glycolic acid)-nanoparticles. Methods: SC-nanoparticles were prepared by the double emulsion solvent evaporation method. Next, free SC and SC-loaded nanoparticles were spray dried in the presence of appropriate excipients (lactose, maltose and trehalose). Physicochemical properties and aerodynamic behavior of prepared powders were evaluated. In addition, drug accumulation from selected formulations in the rat lung tissue was compared with oral and IV administration. Results: Size and fine particle fraction of selected nanocomposites and free SC microparticles were 7 and 4.5 µm, and 60.2% and 68.2%, respectively. Following oral and IV administration, the drug was not detectable in the lung after 4 and 6 h, respectively, but in SC-loaded nanoparticles, the drug was detectable in the lung even after 12 h of inhalation. Respirable particles containing free SC provided high concentration at first that was detectable up to 6 after insufflation. Conclusion:In vivostudy demonstrated that pulmonary administration of sildenafil and sildenafil nanoparticles produced longer half-life and higher concentration of the drug in the lung tissue as compared to oral and IV administration. So, these formulations could be more effective than oral and IV administration of this drug. [ABSTRACT FROM PUBLISHER]

The rapid development of nanotechnology provides alternative approaches to overcome several limitations of conventional anti-cancer therapy. Drug targeting using functionalized nanoparticles to advance their transport to the dedicated site, became a new standard in novel anti-cancer methods. In effect, the employment of nanoparticles during design of antineoplastic drugs helps to improve pharmacokinetic properties, with subsequent development of high specific, non-toxic and biocompatible anti-cancer agents. However, the physicochemical and biological diversity of nanomaterials and a broad spectrum of unique features influencing their biological action requires continuous research to assess their activity. Among numerous nanosystems designed to eradicate cancer cells, only a limited number of them entered the clinical trials. It is anticipated that progress in development of nanotechnology-based anti-cancer materials will provide modern, individualized anti-cancer therapies assuring decrease in morbidity and mortality from cancer diseases. In this review we discussed the implication of nanomaterials in design of new drugs for effective antineoplastic therapy and describe a variety of mechanisms and challenges for selective tumor targeting. We emphasized the recent advantages in the field of nanotechnology-based strategies to fight cancer and discussed their part in effective anti-cancer therapy and successful drug delivery. [ABSTRACT FROM AUTHOR]

In this study, PLGA or PLGA-PEG blend nanoparticles were developed loading amphotericin B (AmB), an antifungal agent broadly used in therapy. A 22 × 31factorial experimental design was conducted to indicate an optimal formulation of nanoparticles containing AmB and demonstrate the influence of the interactions of components on the mean particle size and drug encapsulation efficiency. The independent variables analyzed were polymer amount (two levels) and organic phase (three factors in one level). The parameters methanol as cosolvent and higher polymer amount originated from the higher AmB encapsulation, but with the larger particle size. The selected optimized parameters were set as the lower polymer amount and ethyl acetate as cosolvent in organic phase, for both PLGA and PLGA-PEG nanoparticles. These parameters originated from nanoparticles with the size of 189.5 ± 90 nm and 169 ± 6.9 nm and AmB encapsulation efficiency of 94.0 ± 1.3% and 92.8 ± 2.9% for PLGA and PLGA-PEG nanoparticles, respectively. Additionally, these formulations showed a narrow size distribution indicating homogeneity in the particle size. PLGA and PLGA-PEG nanoparticles are potential carrier for AmB delivery and the factorial design presented an important tool in optimizing nanoparticles formulations. [ABSTRACT FROM AUTHOR]

The objective of the present study was to develop, evaluate and optimize a polymeric nanoparticle (NP) system containing Cxb for pulmonary delivery of Cxb in the treatment of lung cancer. NPs were prepared by the emulsion solvent diffusion and evaporation method using poly(D, L lactideglycolide) (PLGA). The size of NPs ranged from 153 to 192 nm and was affected by PLGA content, surfactant concentration and organic phase volume. Zeta potential of NPs (−4.5 to −8.6 mV) was more affected by PLGA content and organic phase volume. PLGA content was also the most effective factor on the entrapment efficiency and release rate of Cxb from NPs. The optimum formulation which obtained with 5 mg Cxb, 25 mg PLGA, 0.5% surfactant, 2.5% organic volume and 15 000 rpm showed release of Cxb within 30 h. The optimized formulation co-spray dried with lactose (hybrid microparticles) displayed desirable fine particle fraction, mass medium aerodynamic diameter, geometric standard deviation of 70.3%, 1.46% and 3.38%, respectively. Our results provide evidence for the potential of PLGA NPs for delivery of Cxb through inhalation as means to alleviate the cardiovascular risk of Cxb administration. [ABSTRACT FROM AUTHOR]

Purpose: Aim of this study was to explore the potential of a design of experiments approach to nanoprecipitation (NPR) and nano spray drying (NSD) as processes for preparing poly (lactic-co-glycolic acid, PLGA) nano- and microparticles. In particular, we determined the feasible size range, critical factors influencing particle size, size distribution or yield, and the robustness towards variations of the batch size. Methods: A fractional factorial design for response surface was applied to study the influence on continuous, categorical and discrete factors. Results: NPR yielded nanoparticles (150-200 nm) with narrow size distribution (PDI < 0.15). Polymer concentration was the main factor in this process, which was found to be very robust to varying the batch size (0.625-50.0 ml). In contrast, NSD yielded microparticles (2-163 μm). The latter process appeared, however, to be influenced by various factors and, therefore, more difficult to control and less robust towards varying the batch size (5-40 ml). By a factorial design approach to NPR, we succeeded to derive an equation, which allowed the prediction of several optimal formulations with defined particle sizes and distributions. Conclusion: DOE can help to understand innovative manufacturing processes for nano- and microparticulate drug delivery systems, as well as to optimize these processes regarding particle size, size distribution and yield. Such understanding of these processes is instrumental for their subsequent scale up and quality control as needed for preclinical and clinical test batches. [ABSTRACT FROM AUTHOR]

Chitosan (CS) nanoparticles have been extensively studied for siRNA delivery; however, their stability and efficacy are highly dependent on the types of cross-linker used. To address this issue, three common cross-linkers; tripolyphosphate (TPP), dextran sulphate (DS) and poly-D-glutamic acid (PGA) were used to prepare siRNA loaded CS-TPP/DS/PGA nanoparticles by ionic gelation method. The resulting nanoparticles were compared with regard to their physicochemical properties including particle size, zeta potential, morphology, binding and encapsulation efficiencies. Among all the formulations prepared with different cross linkers, CS-TPP-siRNA had the smallest particle size (ranged from 127 ± 9.7 to 455 ± 12.9 nm) with zeta potential ranged from +25.1 ± 1.5 to +39.4 ± 0.5 mV, and high entrapment (>95%) and binding efficiencies. Similarly, CS-TPP nanoparticles showed better siRNA protection during storage at 4˚C and as determined by serum protection assay. TEM micrographs revealed the assorted morphology of CS-TPP-siRNA nanoparticles in contrast to irregular morphology displayed by CS-DS-siRNA and CS-PGA-siRNA nanoparticles. All siRNA loaded CS-TPP/DS/PGA nanoparticles showed initial burst release followed by sustained release of siRNA. Moreover, all the formulations showed low and concentration-dependent cytotoxicity with human colorectal cancer cells (DLD-1), in vitro. The cellular uptake studies with CS-TPP-siRNA nanoparticles showed successful delivery of siRNA within cytoplasm of DLD-1 cells. The results demonstrate that ionically cross-linked CS-TPP nanoparticles are biocompatible non-viral gene delivery system and generate a solid ground for further optimization studies, for example with regard to steric stabilization and targeting. [ABSTRACT FROM AUTHOR]

The goal of this research is preparation, optimization and in-vitro evaluation of rifampinloaded silica nanoparticles in order to use in the pulmonary drug delivery. Nanoparticles are exhaled because of their small size. Preparation of nanoaggregates in a micron-size scale and re-dispersion of them after deposition in the lung is an approach to overcome this problem. We used this approach in our research. Rifampin was selected as a model lipophilic molecule since it was a well-documented and much used anti tuberculosis drug. A half factorial design was used to identify significant parameters of the spray drying process. The results showed that feed concentration, feed pH and the interaction between feed flow rate and gas atomizer flow rate had statistically significant effects on the particle size of nanoaggregates. The Box- Behnken design was employed to optimize the spray drying process. Finally, a quadratic equation which explains the relation between independent variables and aerodynamic diameter of nanoaggregates was obtained. Rifampin-loaded silica nanoaggregates underwent different in-vitro tests including: SEM, Aerosol performance and drug release. The in-vitro drug release was investigated with buffer phosphate (pH=7.4). Regarding the drug release study, a triphasic pattern of release was observed. The rifampin-loaded silica nanoaggregates were capable of releasing 90% drug content after 24 h in combination patterns of release. The prepared rifampin-loaded nanoaggregates seem to have a potential to be used in a pulmonary drug delivery. [ABSTRACT FROM AUTHOR]

Inhaled nanomaterials present a challenge to traditional methods and understanding of respiratory toxicology. In this study, a non-targeted metabolomics approach was used to investigate relationships between nanoparticle hydrophobicity, inflammatory outcomes and the metabolic fingerprint in bronchoalveolar fluid. Measures of acute lung toxicity were assessed following single-dose intratracheal administration of nanoparticles with varying surface hydrophobicity (i.e. pegylated lipid nanocapsules, polyvinyl acetate nanoparticles and polystyrene beads; listed in order of increasing hydrophobicity). Broncho-alveolar lavage (BAL) fluid was collected from mice exposed to nanoparticles at a surface area dose of 220 cm2 and metabolite fingerprints were acquired via ultra pressure liquid chromatography-mass spectrometry-based metabolomics. Particles with high surface hydrophobicity were pro-inflammatory. Multivariate analysis of the resultant small molecule fingerprints revealed clear discrimination between the vehicle control and polystyrene beads ( p < 0.05), as well as between nanoparticles of different surface hydrophobicity ( p < 0.0001). Further investigation of the metabolic fingerprints revealed that adenosine monophosphate (AMP) concentration in BAL correlated with neutrophilia ( p < 0.01), CXCL1 levels ( p < 0.05) and nanoparticle surface hydrophobicity ( p < 0.001). Our results suggest that extracellular AMP is an intermediary metabolite involved in adenine nucleotide-regulated neutrophilic inflammation as well as tissue damage, and could potentially be used to monitor nanoparticle-induced responses in the lung following pulmonary administration. [ABSTRACT FROM AUTHOR]

The goal of this research is to determine the feasibility of loading rifampin into mesoporous silica nanoparticles. Rifampin was selected as a model lipophilic molecule since it is a welldocumented and much used anti tuberculosis drug. The mesoporous silica nanoparticles were prepared by using tetraethyl ortho silicate and cetyltrimethyl ammonium bromide (as surfactant). The prepared nanoparticles were characterized in terms of their particle size measurement and porosimetry. The results showed that the particle size is 218 ± 46 nm (mean ± SD) and surface area is 816 m2g-1. In order to load rifampin within the mesopores, adsorption experiments using three different solvents (methanol, water and dimethyl sulfoxide) were carried out. The loading procedure resulted in a significant improvement in the amount of rifampin loaded into mesoporous silica nanoparticles and methanol was found to be a suitable solvent, providing a drug entrapment efficiency of 52 %. Rifampin loaded nanoparticles underwent different invitro tests including, SEM and drug release. The in-vitro drug release was investigated using buffer phosphate (pH=7.4). Regarding the drug release study, a biphasic pattern of release was observed. The drug-loaded mesoporous silica nanoparticles were capable of releasing 95% of their drug content after 24 h, following a faster release in the first four hours. The prepared rifampin loaded nanoparticles seem to have potential for use as a pulmonary drug delivery. [ABSTRACT FROM AUTHOR]

The 21st century has seen a paradigm shift to inhaled therapy, for both systemic and local drug delivery, due to the lung's favourable properties of a large surface area and high permeability. Pulmonary drug delivery possesses many advantages, including non-invasive route of administration, low metabolic activity, control environment for systemic absorption and avoids first bypass metabolism. However, because the lung is one of the major ports of entry, it has multiple clearance mechanisms, which prevent foreign particles from entering the body. Although these clearance mechanisms maintain the sterility of the lung, clearance mechanisms can also act as barriers to the therapeutic effectiveness of inhaled drugs. This effectiveness is also influenced by the deposition site and delivered dose. Particulate-based drug delivery systems have emerged as an innovative and promising alternative to conventional inhaled drugs to circumvent pulmonary clearance mechanisms and provide enhanced therapeutic efficiency and controlled drug release. The principle of multiple pulmonary clearance mechanisms is reviewed, including mucociliary, alveolar macrophages, absorptive, and metabolic degradation. This review also discusses the current approaches and formulations developed to achieve optimal pulmonary drug delivery systems. [ABSTRACT FROM AUTHOR]

Carbohydrate functionalization of nanoparticles allows for targeting of C-type lectin receptors. This family of pattern recognition receptors expressed on innate immune cells, such as macrophages and dendritic cells, can be used to modulate immune responses. In this work, the in vivo safety profile of carbohydrate-functionalized polyanhydride nanoparticles was analyzed following parenteral and intranasal administration in mice. Polyanhydride nanoparticles based on 1,6-bis-( p-carboxyphenoxy)hexane and 1,8-bis-( p-carboxyphenoxy)-3,6-dioxaoctane were used. Nanoparticle functionalization with di-mannose (specifically carboxymethyl-α- d-mannopyranosyl-(1,2)- d-mannopyranoside), galactose (specifically carboxymethyl-β-galactoside), or glycolic acid induced no adverse effects after administration based on histopathological evaluation of liver, kidneys, and lungs. Regardless of the polymer formulation, there was no evidence of hepatic or renal damage or dysfunction observed in serum or urine samples. The histological profile of cellular infiltration and the cellular distribution and kinetics in the lungs of mice administered with nanoparticle treatments followed similar behavior as that observed in the lungs of animals administered with saline. Cytokine and chemokine profiles in bronchoalveolar lavage fluid indicated surface chemistry dependence on modest secretion of IL-6, IP-10, and MCP-1; however, there was no evidence of any deleterious histopathological changes. Based on these analyses, carbohydrate-functionalized nanoparticles are safe for in vivo applications. These results provide foundational information towards the evaluation of the capabilities of these surface-modified nanoparticles as vaccine delivery formulations. [ABSTRACT FROM AUTHOR]

Nowadays, gene delivery for therapeutic objects is considered one of the most promising strategies to cure both the genetic and acquired diseases of human. The design of efficient gene delivery vectors possessing the high transfection efficiencies and low cytotoxicity is considered the major challenge for delivering a target gene to specific tissues or cells. On this base, the investigations on non-viral gene vectors with the ability to overcome physiological barriers are increasing. Among the non-viral vectors, nanoparticles showed remarkable properties regarding gene delivery such as the ability to target the specific tissue or cells, protect target gene against nuclease degradation, improve DNA stability, and increase the transformation efficiency or safety. This review attempts to represent a current nanoparticle based on its lipid, polymer, hybrid, and inorganic properties. Among them, hybrids, as efficient vectors, are utilized in gene delivery in terms of materials (synthetic or natural), design, and in vitro/ in vivo transformation efficiency. [ABSTRACT FROM AUTHOR]

In medicine, nanotechnology has sparked a rapidly growing interest as it promises to solve a number of issues associated with conventional therapeutic agents, including their poor water solubility (at least, for most anticancer drugs), lack of targeting capability, nonspecific distribution, systemic toxicity, and low therapeutic index. Over the past several decades, remarkable progress has been made in the development and application of engineered nanoparticles to treat cancer more effectively. For example, therapeutic agents have been integrated with nanoparticles engineered with optimal sizes, shapes, and surface properties to increase their solubility, prolong their circulation halflife, improve their biodistribution, and reduce their immunogenicity. Nanoparticles and their payloads have also been favorably delivered into tumors by taking advantage of the pathophysiological conditions, such as the enhanced permeability and retention effect, and the spatial variations in the pH value. Additionally, targeting ligands (e.g., small organic molecules, peptides, antibodies, and nucleic acids) have been added to the surface of nanoparticles to specifically target cancerous cells through selective binding to the receptors overexpressed on their surface. Furthermore, it has been demonstrated that multiple types of therapeutic drugs and/or diagnostic agents (e.g., contrast agents) could be delivered through the same carrier to enable combination therapy with a potential to overcome multidrug resistance, and real-time readout on the treatment efficacy. It is anticipated that precisely engineered nanoparticles will emerge as the next-generation platform for cancer therapy and many other biomedical applications. [ABSTRACT FROM AUTHOR]

Chitosan-tripolyphosphate (TPP) nanoparticles have received great interest as a drug delivery system due to the simple and mild procedure of ionic gelation and the biocompatibility of chitosan. We have studied the formation of chitosan nano- and microparticles through ionic gelation with TPP in the absence and presence of NaCl, by measuring the kinetics of formation, particle size, and zeta potential. Depending on the experimental conditions (concentrations of chitosan and TPP and the presence or absence of NaCl), particle formation displays an exponential or a sigmoidal time dependency. In order to explain the kinetics measurements, we have set up a simple kinetics model involving four different species. The model is constructed on the basis of previously proposed mechanisms of particle formation and our measurements of particle size and kinetics of formation. The model can simulate all the different time dependencies of particle formation. We also determined the effect of small interfering RNA (siRNA) on the rate of particle formation, but apparently siRNA has little or no influence on particle formation when TPP is present. [ABSTRACT FROM AUTHOR]

Colloidal drug delivery systems have been extensively investigated as drug carriers for the application of different drugs via different routes of administration. Systems, such as solid lipid nanoparticles, polymeric nanoparticles and liposomes, have been investigated for a long time for the treatment of various lung diseases. The pulmonary route, owing to a noninvasive method of drug administration, for both local and systemic delivery of an active pharmaceutical ingredient (API) forms an ideal environment for APIs acting on pulmonary diseases and disorders. Additionally, this route offers many advantages, such as a high surface area with rapid absorption due to high vascularization and circumvention of the first pass effect. Aerosolization or inhalation of colloidal systems is currently being extensively studied and has huge potential for targeted drug delivery in the treatment of various diseases. Furthermore, the surfactant-associated proteins present at the interface enhance the effect of these formulations by decreasing the surface tension and allowing the maximum effect. The most challenging part of developing a colloidal system for nebulization is to maintain the critical physicochemical parameters for successful inhalation. The following review focuses on the current status of different colloidal systems available for the treatment of various lung disorders along with their characterization. Additionally, different in vitro, ex vivo and in vivo cell models developed for the testing of these systems with studies involving cell culture analysis are also discussed. [ABSTRACT FROM AUTHOR]

The treatment of lung diseases including lung cancer and tuberculosis is one of the most challenging problems in clinical practice, because the conventional drug delivery systems cannot deliver drug effectively to the lung, which result in low therapeutic effect. Therefore, lung-targeted drug delivery systems (LTDDS) that can deliver drug to the lung in an effective way to increase drug concentration in lung tissue and reduce drug distribution in other organs and tissues become an ideal strategy to treat lung diseases. The LTDDS mainly include microparticles (microspheres and microencapsules), liposomes and nanoparticles via intravenous administration, and dry powder carriers and nebulized suspensions via pulmonary inhalation. As lungs possess the large absorptive surface area, the low thickness of the epithelial barrier and good blood supply, pulmonary inhalation has received great attention. Intravenous route is the commonly practiced method for administration of larger doses of drugs into the body. Numerous drugs can be delivered directly into general circulation by avoiding their first-pass metabolism and have potential to transport drugs to the lung via intravenous administration. This present article reviews the development, evaluation and application of LTDDS via intravenous administration for the treatment of lung diseases reported in the past decades. [ABSTRACT FROM AUTHOR]

Background and the aim of the study: The objective of the present study was to formulate and optimize nanoparticles (NPs) of sildenafil-loaded poly (lactic-co-glycolic acid) (PLGA) by double emulsion solvent evaporation (DESE) method. The relationship between design factors and experimental data was evaluated using response surface methodology. Method: A Box-Behnken design was made considering the mass ratio of drug to polymer (D/P), the volumetric proportion of the water to oil phase (W/O) and the concentration of polyvinyl alcohol (PVA) as the independent agents. PLGA-NPs were successfully prepared and the size (nm), entrapment efficiency (EE), drug loading (DL) and cumulative release of drug from NPs post 1 and 8 hrs were assessed as the responses. Results: The NPs were prepared in a spherical shape and the sizes range of 240 to 316 nm. The polydispersity index of size was lower than 0.5 and the EE (%) and DL (%) varied between 14-62% and 2-6%, respectively. The optimized formulation with a desirability factor of 0.9 was selected and characterized. This formulation demonstrated the particle size of 270 nm, EE of 55%, DL of 3.9% and cumulative drug release of 79% after 12 hrs. In vitro release studies showed a burst release at the initial stage followed by a sustained release of sildenafil from NPs up to 12 hrs. The release kinetic of the optimized formulation was fitted to Higuchi model. Conclusions: Sildenafil citrate NPs with small particle size, lipophilic feature, high entrapment efficiency and good loading capacity is produced by this method. Characterization of optimum formulation, provided by an evaluation of experimental data, showed no significant difference between calculated and measured data. [ABSTRACT FROM AUTHOR]

The aim of this study was to investigate the potential cytotoxicity of solid lipid nanoparticles (SLN) loaded with sildenafil. The SLNs were tested as a new drug delivery system (DDS) for the inhalable treatment of pulmonary hypertension in human lungs. Solubility of sildenafil in SLN lipid matrix (30:70 phospholipid:triglyceride) was determined to 1% sildenafil base and 0.1% sildenafil citrate, respectively. Sildenafil-loaded SLN with particle size of approximately 180 nm and monomodal particle size distribution were successfully manufactured using a novel microchannel homogenization method and were stable up to three months. Sildenafil-loaded SLN were then used in in vitro and ex vivo models representing lung and heart tissue. For in vitro models, human alveolar epithelial cell line (A459) and mouse heart endothelium cell line (MHEC5-T) were used. For ex vivo models, rat precision cut lung slices (PCLS) and rat heart slices (PCHS) were used. All the models were treated with plain SLN and sildenafil-loaded SLN in a concentration range of 0-5000 µg/ml of lipid matrix. The toxicity was evaluated in vitro and ex vivo by 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay. Median lethal dose 50% (LD50) values for A549 cells and PCLS were found to be in the range of 1200-1900 µg/ml while for MHEC5-T cells and precision cut heart slices values were found between 1500 and 2800 µg/ml. PCHS showed slightly higher LD50 values in comparison to PCLS. Considering the toxicological aspects, sildenafil-loaded SLN could have potential in the treatment of pulmonary hypertension via inhalation route. [ABSTRACT FROM AUTHOR]

Nanomedicine has the potential to transform clinical care in the 21st century. However, a precise understanding of how nanomaterial design parameters such as size, shape and composition affect the mammalian immune system is a prerequisite for the realization of nanomedicine's translational promise. Herein, we make use of the recently developed Particle Replication in Non-wetting Template (PRINT) fabrication process to precisely fabricate particles across and the nano- and micro-scale with defined shapes and compositions to address the role of particle design parameters on the murine innate immune response in both in vitro and in vivo settings. We find that particles composed of either the biodegradable polymer poly(lactic-co-glycolic acid) (PLGA) or the biocompatible polymer polyethylene glycol (PEG) do not cause release of pro-inflammatory cytokines nor inflammasome activation in bone marrow-derived macrophages. When instilled into the lungs of mice, particle composition and size can augment the number and type of innate immune cells recruited to the lungs without triggering inflammatory responses as assayed by cytokine release and histopathology. Smaller particles (80×320 nm) are more readily taken up in vivo by monocytes and macrophages than larger particles (6 µm diameter), yet particles of all tested sizes remained in the lungs for up to 7 days without clearance or triggering of host immunity. These results suggest rational design of nanoparticle physical parameters can be used for sustained and localized delivery of therapeutics to the lungs. [ABSTRACT FROM AUTHOR]

Nanoparticles represent an alternative to viral vectors for genetic material transfer to the nervous system. However, to increase transfection efficiency in the central nervous system and to decrease toxicity, the design of nanoparticles needs to be improved to enhance blood-brain barrier crossing and endosomal escape. This paper reviews the strategies used to solve these difficulties and covers the use of various nanoparticles including natural inorganic particles, natural polymers, cationic lipids, polyethylenimine derivatives, dendrimers, and carbon-based nanoparticles. The effectiveness, both in vivo and in vitro, of each method to deliver genetic material to neural tissue is discussed. [ABSTRACT FROM AUTHOR]

This study was performed to test the feasibility of chitosan and polylactic- co-glycolic acid (PLGA) incorporated nanoparticles as sustained-release carriers for the delivery of negatively charged low molecular weight heparin (LMWH). Fourier transform infrared (FTIR) spectrometry was used to evaluate the interactions between chitosan and LMWH. The shifts, intensity, and broadening of the characteristic peaks for the functional groups in the FTIR spectra indicated that strong interactions occur between the positively charged chitosans and the negatively charged LMWHs. Three types of LMWH nanoparticles (NP-1, NP-2, and NP-3) were prepared using chitosan with or without PLGA: NP-1 nanoparticles were formed by polyelectrolyte complexation after single mixing, NP-2 nanoparticles were prepared by polyelectrolyte complexation after single emulsion-diffusion-evaporation, and NP-3 nanoparticles were optimized by double emulsion-diffusion-evaporation. NP-3 nanoparticles of LMWH prepared by the emulsion-diffusion-evaporation method showed significant differences in particle morphology, size, zeta potential, and drug release profile compared to NP-1 nanoparticles formed by polyelectrolyte complexation. Another ionic complex of LMWH with chitosan-incorporated PLGA nanoparticles (NP-2) showed lower drug entrapment efficiency than that of NP-1 and NP-3. The drug release rate of NP-3 was slower than the release rates of NP-1 and NP-2, although particle morphology of NP-3 was similar to that of NP-2. Cell viability was not adversely affected when cells were treated with all three types of nanoparticles. The data presented in this study demonstrate that nanoparticles formulated with chitosan-PLGA could be a safe sustained-release carrier for the delivery of LMWH. [ABSTRACT FROM AUTHOR]

Delivering active ingredients using biocompatible and biodegradable carriers such as gelatin nanoparticles (GNPs) to the lung constitutes a promising non-invasive route of administration. However, the pulmonary delivery of nanoparticle-based immunotherapy is still a field that requires more clarification. In this study, GNPs loaded with cytosine-phosphate-guanine oligodeoxynucleotides (CpG-ODN)-loaded and plain GNPs were aerosolised either by a conventional pressured metered dose inhaler (pMDI) or by active or passive vibrating-mesh (VM) nebulisers. GNP sizes after nebulisation by active and passive VM nebulisers were 248.2 ± 7.34 and 222.3 ± 1.42 nm, respectively. GNP concentrations after aerosolisation were found consistent and second-stage particle deposition in an impinger was up to 65.68 ± 11.2% of the nebulised dose. VM nebulisers produced high fine particle fractions, while pMDIs did not. Nebulised CpG-ODN-loaded GNPs remained capable to stimulate IL-10 release (225.2 ± 56.3 pg/ml) in vitro from equine alveolar lymphocytes. Thus, a novel system for pulmonary GNP-mediated immunotherapy in vivo was established. [ABSTRACT FROM AUTHOR]

The supercritical CO2-based technologies have been widely used in the formation of drug and/or polymer particles for biomedical applications. In this study, nanoparticles of poly-(methyl vinyl ether-co-maleic anhydride) (PVM/MA) were successfully fabricated by a process of solution-enhanced dispersion by supercritical CO2 (SEDS). A 23 factorial experiment was designed to investigate and identify the significance of the processing parameters (concentration, flow and solvent/nonsolvent) for the surface morphology, particle size, and particle size distribution of the products. The effect of the concentration of PVM/MA was found to be dominant in the results regarding particle size. Decreasing the initial solution concentration of PVM/MA decreased the particle size significantly. After optimization, the resulting PVM/MA nanoparticles exhibited a good spherical shape, a smooth surface, and a narrow particle size distribution. Fourier transform infrared spectroscopy (FTIR) spectra demonstrated that the chemical composition of PVM/MA was not altered during the SEDS process and that the SEDS process was therefore a typical physical process. The absolute value of zeta potential of the obtained PVM/MA nanoparticles was larger than 40 mV, indicating the samples' stability in aqueous suspension. Analysis of thermogravimetry-differential scanning calorimetry (TG-DSC) revealed that the effect of the SEDS process on the thermostability of PVM/MA was negligible. The results of gas chromatography (GC) analysis confirmed that the SEDS process could efficiently remove the organic residue [ABSTRACT FROM AUTHOR]

Polymeric nanoparticles are widely used as targeted carriers for biomacromolecules. In this paper, modified gelatin nanoparticles were prepared and their feasibility as insulin pulmonary administration system was investigated. d, l-glyceraldehyde and poloxamer 188 were used for gelatin nanoparticle preparation. Novel water-in-water emulsion technique was used to prepare insulin-loaded nanoparticles. Morphological examination of insulin-loaded nanoparticles was carried out using scanning electron microscopy (SEM). Intratracheal instillation of insulin-loaded nanoparticles was performed to evaluate animal hypoglycemic effect. With fluorescence labeling of insulin, alveolar deposition and absorption of insulin-loaded nanoparticles were investigated. Histological changes in the lung were also observed to evaluate the safety. From the micromorphology observation, insulin-loaded nanoparticles under gelatin-poloxamer 188 ratio at 1:1 showed smooth and uniform surface, with average particle size 250 nm and Zeta potential −21.1 mV. From animal experiment, insulin-loaded nanoparticles under gelatin-poloxamer 188 ratio at 1:1 promoted insulin pulmonary absorption effectively and showed good relative pharmacological bioavailability. Proved by alveolar deposition result, FITC-insulin-loaded nanoparticle group was characterized by an acute and rapid hypoglycemic effect. In addition, nanoparticles could guarantee the safety of lung by reducing insulin deposition in lung. A transient weak inflammatory response was observed at 1 day after administration. With good physical characterization, high bioavailability, fast and stable hypoglycemic effect, insulin-loaded nanoparticles might be developed as a novel insulin pulmonary system for diabetes therapy. [ABSTRACT FROM AUTHOR]

Small liposome suspensions (hydrodynamic diameter, 80-130 nm) were nebulised, and the resulting changes in morphology and bilayer integrity were found to be related to surface properties controlled by bilayer composition. Four separate liposome compositions (or liposome types) were investigated using three different phospholipids with unique properties. Morphological changes were studied using light scattering and imaging of liposomes before and after nebulisation, and structural integrity was investigated on the basis of the retention of an encapsulated dye (probe molecule). Nebulisation generated droplets contained liposomes. The liposome particles generated on droplet evaporation had a hollow structure as evidenced by electron imaging, indicating that the lipid bilayer does not collapse on evaporation. The particles of all compositions had mobility diameters between 50 and 90 nm, 1.4-1.6 times smaller than their diameters (hydrodynamic) measured before nebulisation, implying considerable volume shrinkage. Liposomes that had polymer-conjugated lipids covering their external surface underwent aggregation during nebulisation, evidenced by increased diameter after nebulisation. Incorporation of charged lipids reduced nebulisation-induced aggregation, but induced greater membrane rupture during aerosol generation, causing leakage of encapsulated probe molecules. Incorporation of both cholesterol and charged lipids prevented aggregation, but also preserved bilayer integrity, evidenced by the maximum retention of encapsulated dye observed in these conditions (>85%). The findings suggest that liposome bilayer composition can be manipulated to improve the efficiency of liposome aerosol delivery. [ABSTRACT FROM AUTHOR]

Nanoparticles (NPs) comprised of nanoengineered complexes are providing new opportunities for enabling targeted delivery of a range of therapeutics and combinations. A range of functionalities can be included within a nanoparticle complex, including surface chemistry that allows attachment of cell-specific ligands for targeted delivery, surface coatings to increase circulation times for enhanced bioavailability, specific materials on the surface or in the nanoparticle core that enable storage of a therapeutic cargo until the target site is reached, and materials sensitive to local or remote actuation cues that allow controlled delivery of therapeutics to the target cells. However, despite the potential benefits of NPs as smart drug delivery and diagnostic systems, much research is still required to evaluate potential toxicity issues related to the chemical properties of NP materials, as well as their size and shape. The need to validate each NP for safety and efficacy with each therapeutic compound or combination of therapeutics is an enormous challenge, which forces industry to focus mainly on those nanoparticle materials where data on safety and efficacy already exists, i.e., predominantly polymer NPs. However, the enhanced functionality affordable by inclusion of metallic materials as part of nanoengineered particles provides a wealth of new opportunity for innovation and new, more effective, and safer therapeutics for applications such as cancer and cardiovascular diseases, which require selective targeting of the therapeutic to maximize effectiveness while avoiding adverse effects on non-target tissues. [ABSTRACT FROM AUTHOR]