Search

This work aimed to evaluate the potential of chitosan/cellulose nanocrystals (CNC) films to be used as active pads for meat packages to prolong its shelf-life and preserve its properties over time. Several CNC concentrations (5, 10, 25, and 50 wt%) were tested and the films were produced by solvent casting. The developed samples were characterized by ATR-FTIR, TGA, FESEM, and XRD. The transparency, antimicrobial, barrier and mechanical properties were also assessed. Finally, the films' ability to prolong food shelf-life was studied in real conditions using chicken meat. CNC incorporation improved the thermal stability and the oxygen barrier while the water vapor permeability was maintained. An enhancement of mechanical properties was also observed by the increase in tensile strength and Young's modulus in chitosan/CNC films. These films demonstrated bactericidal effect against Gram-positive and Gram-negative bacteria and fungicidal activity against Candida albicans. Lastly, chitosan-based films decreased the growth of Pseudomonas and Enterobacteriaceae bacteria in meat during the first days of storage compared to commercial membranes, while chitosan/CNC films reduced the total volatile basic nitrogen (TVB-N), indicating their efficiency in retarding meat's spoilage under refrigeration conditions. This work highlights the great potential of natural-based films to act as green alternatives for food preservation., (Copyright © 2021 Elsevier B.V. All rights reserved.)

A new hybrid bionanomaterial composed of zinc oxide nanoparticles (ZnO NPs) and chitosan was constructed after enzymatic immobilization of papain for biomedical applications. In this work, we report the preparation and characterization steps of this bionanomaterial and its biocompatibility in vitro. The properties of the immobilized papain system were investigated by transmission electron microscopy, zeta potential, DLS, UV-vis absorption spectroscopy, FTIR spectroscopy, and X-ray diffraction. The prepared bionanomaterial exhibited a nanotriangular structure with a size of 150 nm and maintained the proteolytic activity of papain. In vitro analyses demonstrated that the immobilized papain system decreased the activation of phagocytic cells but did not induce toxicity. Based on the results obtained, we suggest that the novel bionanomaterial has great potential in biomedical applications in diseases such as psoriasis and wounds., Competing Interests: Declaration of Competing Interest The authors declare no conflict of interest., (Copyright © 2020. Published by Elsevier Ltd.)

The development of advanced facemasks stands out as a paramount priority in enhancing healthcare preparedness. In this work, different polypropylene non-woven fabrics (NWF) were characterised regarding their structural, physicochemical and comfort-related properties. The selected NWF for the intermediate layer was functionalised with zinc oxide nanoparticles (ZnO NPs) 0.3 and 1.2wt% using three different methods: electrospinning, dip-pad-dry and exhaustion. After the confirmation of ZnO NP content and distribution within the textile fibres by morphological and chemical analysis, the samples were evaluated regarding their antimicrobial properties. The functionalised fabrics obtained via dip-pad-dry unveiled the most promising data, with 0.017 ± 0.013wt% ZnO NPs being mostly located at the fibre's surface and capable of total eradication of Staphylococcus aureus and Escherichia coli colonies within the tested 24 h (ISO 22196 standard), as well as significantly contributing (**** p < 0.0001) to the growth inhibition of the bacteriophage MS2, a surrogate of the SARS-CoV-2 virus (ISO 18184 standard). A three-layered structure was assembled and thermoformed to obtain facemasks combining the previously chosen NWF, and its resulting antimicrobial capacity, filtration efficiency and breathability (NP EN ISO 149) were assessed. The developed three-layered and multiscaled fibrous structures with antimicrobial capacities hold immense potential as active individual protection facemasks. [ABSTRACT FROM AUTHOR]

Cancer remains one of the most challenging health problems worldwide, and localized therapeutic approaches based on micro/nanofibers have shown potential for its treatment. Micro/nanofibers offer several advantages as a drug delivery system, such as high surface area, tunable pore size, and sustained release properties, which can improve drug efficacy and reduce side effects. In addition, functionalization of these fibers with nanoparticles can enhance their targeting and therapeutic capabilities. Localized delivery of drugs and/or other therapeutic agents via micro/nanofibers can also help to overcome the limitations of systemic administration, such as poor bioavailability and off-target effects. Several studies have shown promising results in preclinical models of cancer, including inhibition of tumor growth and improved survival rates. However, more research is needed to overcome technical and regulatory challenges to bring these approaches to clinical use. Localized therapeutic approaches based on micro/nanofibers hold great promise for the future of cancer treatment, providing a targeted, effective, and minimally invasive alternative to traditional treatments. The main focus of this review is to explore the current treatments utilizing micro/nanofibers, as well as localized drug delivery systems that rely on fibrous structures to deliver and release drugs for the treatment of cancer in a specific area. [ABSTRACT FROM AUTHOR]

Although the force/pressure applied onto a textile substrate through a uniaxial compression is constant and independent of the yarn direction, it should be noted that such mechanical action causes a geometric change in the substrate, which can be identified by the reduction in its lateral thickness. Therefore, the objective of this study was to investigate the influence of the fabric orientation on both knitted and woven pressure sensors, in order to generate knowledge for a better design process during textile piezoresistive sensor development. For this purpose, these distinct textile structures were doped with different concentrations of graphene nanoplatelets (GNPs), using the screen-printing technique. The chemical and physical properties of these screen-printed fabrics were analysed using Field Emission Scanning Electron Microscopy, Ground State Diffuse Reflectance and Raman Spectroscopy. Samples were subjected to tests determining linear electrical surface resistance and piezoresistive behaviour. In the results, a higher presence of conductive material was found in woven structures. For the doped samples, the electrical resistance varied between 105 Ω and 101 Ω, for the GNPs' percentage increase. The lowest resistance value was observed for the woven fabric with 15% GNPs (3.67 ± 8.17 × 101 Ω). The samples showed different electrical behaviour according to the fabric orientation. Overall, greater sensitivity in the longitudinal direction and a lower coefficient of variation CV% of the measurement was identified in the transversal direction, coursewise for knitted and weftwise for woven fabrics. The woven fabric doped with 5% GNPs assembled in the weftwise direction was shown to be the most indicated for a piezoresistive sensor, due to its most uniform response and most accurate measure of mechanical stress. [ABSTRACT FROM AUTHOR]

Core–shell nanoparticles (NPs) based on metal oxides, namely magnesium oxide (MgO) and silica (SiO2), are a fantastic alternative for natural fibers' functionalization. In this work, flax fibers were functionalized with MgO and MgO–SiO2 core–shell NPs to achieve multifunctionality. The flax fabrics were functionalized with both NPs by a simple in-situ method. Parallelly, the synthesis of the isolated NPs was performed for comparison purposes. The developed samples were characterized, confirming the successful synthesis of the core–shell NPs and their incorporation onto the fabrics. The wash durability tests confirmed the beneficial effect of the SiO2 shell on the NPs' anchorage. Ultraviolet (UV) protection capability (UV protection factor (UPF) of 50 +) and hydrophobicity (water contact angle (WCA) of 123.0°) were achieved, together with antibacterial activity and the degradation of methylene blue (MB) capability. Overall, this work presents an innovative method for the synthesis of MgO–SiO2 core–shell NPs and their incorporation onto flax fabrics. [ABSTRACT FROM AUTHOR]

Due to the prevalence of the COVID-19 pandemic, the demand for disposable facemasks has become a global issue. Unfortunately, the use of these products has negative effects on the environment, and therefore, the use of biodegradable materials is a powerful strategy to overcome this challenge. Aligned with this concept, in this work, biodegradable facemasks were developed using poly(ε-caprolactone) (PCL) polymer and cotton natural fibers. The filter layer was produced using an electrospinning technique, since electrospun membranes present remarkable characteristics for air filtration. The electrospun membranes were functionalized with different nanoparticles (NPs), including silver (Ag), titanium dioxide (TiO2) and magnesium oxide (MgO), in order to include new properties, namely antibacterial effect. The developed membranes were characterized by FESEM, EDS, ATR-FTIR, GSDR and TGA, which confirmed the successful impregnation of NPs onto PCL membranes. The antibacterial effect and filtration efficiency were assessed, with the PCL/MgO NPs membrane presenting better results, showing inhibition zone diameters of 25.3 and 13.5 mm against Gram-positive and Gram-negative bacteria, respectively, and filtration efficiency of 99.4%. Three facemask prototypes were developed, and their filtration efficiency, air permeability and thermal comfort were evaluated. Overall, this study demonstrates the potential of PCL/NPs electrospun membranes to act as an active and biodegradable filter layer in facemasks. [ABSTRACT FROM AUTHOR]

Over the years, the development of adaptable monitoring systems to be integrated into soldiers' body gear, making them as comfortable and lightweight as possible (avoiding the use of rigid electronics), has become essential. Electrospun microfibers are a great material for this application due to their excellent properties, especially their flexibility and lightness. Their functionalization with graphene nanoplatelets (GNPs) makes them a fantastic alternative for the development of innovative conductive materials. In this work, electrospun membranes based on polycaprolactone (PCL) were impregnated with different GNPs concentrations in order to create an electrically conductive surface with piezoresistive behavior. All the samples were properly characterized, demonstrating the homogeneous distribution and the GNPs' adsorption onto the membrane's surfaces. Additionally, the electrical performance of the developed systems was studied, including the electrical conductivity, piezoresistive behavior, and Gauge Factor (GF). A maximum electrical conductivity value of 0.079 S/m was obtained for the 2%GNPs-PCL sample. The developed piezoresistive sensor showed high sensitivity to external pressures and excellent durability to repetitive pressing. The best value of GF (3.20) was obtained for the membranes with 0.5% of GNPs. Hence, this work presents the development of a flexible piezoresistive sensor, based on electrospun PCL microfibers and GNPs, utilizing simple methods. [ABSTRACT FROM AUTHOR]

Sustainability has become the primary focus for researchers lately. Biopolymers such as polyhydroxyalkanoate (PHA) and polylactic acid (PLA) are biocompatible and biodegradable. Introducing piezoresistive response in the films produced by PLA and PHA by adding nanoparticles can be interesting. Hence, a study was performed to evaluate the mechanical, electrical and piezoresistive response of films made from PHA and PLA. The films were produced by solvent casting, and they were reinforced with graphene nanoplatelets (GNPs) at different nanoparticle concentrations (from 0.15 to 15 wt.%). Moreover, cellulose nanocrystals (CNC) as reinforcing elements and polyethylene glycol (PEG) as plasticizers were added. After the assessment of the nanoparticle distribution, the films were subjected to tests such as tensile, electrical conductivity and piezoresistive response. The dispersion was found to be good in PLA films and there exist some agglomerations in PHA films. The results suggested that the incorporation of GNPs enhanced the mechanical properties until 0.75 wt.% and they reduced thereon. The addition of 1% CNCs and 20% PEG in 15 wt.% GNPs' tensile values deteriorated further. The PHA films showed better electrical conductivity compared to the PLA films for the same GNPs wt.%. Gauge factor (GF) values of 6.30 and 4.31 were obtained for PHA and PLA, respectively. [ABSTRACT FROM AUTHOR]

In this study, a self-sensing cementitious stabilized sand (CSS) was developed by the incorporation of hybrid carbon nanotubes (CNTs) and graphene nanoplatelets (GNPs) based on the piezoresistivity principle. For this purpose, different concentrations of CNTs and GNPs (1:1) were dispersed into the CSS, and specimens were fabricated using the standard compaction method with optimum moisture. The mechanical and microstructural, durability, and piezoresistivity performances, of CSS were investigated by various tests after 28 days of hydration. The results showed that the incorporation of 0.1%, 0.17%, and 0.24% CNT/GNP into the stabilized sand with 10% cement caused an increase in UCS of about 65%, 31%, and 14%, respectively, compared to plain CSS. An excessive increase in the CNM concentration beyond 0.24% to 0.34% reduced the UCS by around 13%. The addition of 0.1% CNMs as the optimum concentration increased the maximum dry density of the CSS as well as leading to optimum moisture reduction. Reinforcing CSS with the optimum concentration of CNT/GNP improved the hydration rate and durability of the specimens against severe climatic cycles, including freeze–thaw and wetting–drying. The addition of 0.1%, 0.17%, 0.24%, and 0.34% CNMs into the CSS resulted in gauge factors of about 123, 139, 151, and 173, respectively. However, the Raman and X-ray analysis showed the negative impacts of harsh climatic cycles on the electrical properties of the CNT/GNP and sensitivity of nano intruded CSS. [ABSTRACT FROM AUTHOR]

The development of innovative sensing technologies is essential for implementing smart road pavement monitoring systems. The design of asphalt-based materials with intrinsic self-sensing capabilities represents a promising solution in that regard. Despite this, this technology is still not mature and further efforts should be made for its development. With this aim, the present paper evaluates the self-sensing response of asphalt mixtures incorporating graphene nanoplatelets (GNPs), and proposes the use of a digital signal processing technique, based on wavelet transform, for the analysis of the electrical signals generated by the mixture. The results showed that the mixtures exhibited both stress and damage sensing functions, albeit some issues related to the dispersion of GNPs should be further investigated. In addition, wavelet transform analysis seems to be able to capture insightful information about the electrical response of the mixture, as well as its structural condition, useful for traffic and pavement health monitoring purposes. [Display omitted] • The incorporation of GNPs endows asphalt mixtures with stress and damage-sensing functions. • Self-sensing asphalt pavements can be used for pavement health monitoring operations. • The electrical response was analyzed with digital signal processing (DSP) analysis. • SEM analysis revealed agglomerations of GNPs inside the bitumen. [ABSTRACT FROM AUTHOR]

[Display omitted] • We proposed a SNPs-reinforced BPPR, which can be used for 4D printing applications by MSLA resin 3D printing apparatus. • The 4D-printed specimens are characterised by considering Taguchi L9 OA to tailor the shape memory properties to an optimum level. • SNPs-reinforced SMPPCs exhibited excellent shape fixity and recovery ratios while the unreinforced blended polymer exhibited faster recovery. • Confirmation experiments provided strong agreement with the regression models and gave good corelations among various validation methods. The study aims to optimize the shape change response of the Shape Memory Photopolymer Composites (SMPPCs) through the use of the Taguchi method. The SMPPCs were created by blending of Soft Photopolymer Resin (SPPR) with Hard Photopolymer Resin (HPPR) in various weight fractions and reinforcing with Silica Nanoparticles (SNPs) at different weight percentages using a Masked Stereolithography (MSLA). The researchers measured the ability of the material to change its shape by determining its shape recovery time (T), fixity ratio (R f), recovery ratio (R r), and recovery rate (V r). The results indicated that the fastest T was observed in unreinforced Blended Photopolymer Resin (BPPR) with 75 wt% SPPR and 25 wt% HPPR. However, when the BPPR was reinforced with 0.3 wt% SNPs, the T was slower. The use of SNPs as reinforcement resulted in excellent R f , whereas higher weight percentages of SPPR led to better R r. The weight percentage of SPPR was found to be the primary contributor to T, R r , and V r , while the weight percentage of SNPs played a significant role in R f. The optimum parameters for T and V r were A1/B3/C1, for R f were A3/B1/C1, and for R r were A2/B2/C1. The research findings indicate that reinforced BPPR has outstanding fixity ratios and it is more appropriate for applications that necessitate lengthier recovery and slower recovery rate. The inclusion of SNPs in BPPR increases the T and prolongs the temporary shape retention of the specimen. The generated regression models were validated through confirmation experiments, which yielded strong agreement. [ABSTRACT FROM AUTHOR]