Search

Transmission electron microscopy (TEM) in combination with electron tomography is widely used to obtain nanometer scale three-dimensional (3D) structural information about biological samples. However, studies of whole eukaryotic cells are limited in resolution and/or contrast on account of the effect of chromatic aberration of the TEM objective lens on electrons that have been scattered inelastically in the specimen. As a result, 3D information is usually obtained from sections and not from whole cells. Here, we use chromatic aberration-corrected TEM to record bright-field TEM images of nanoparticles in a whole mount macrophage cell. Tilt series of images are used to generate electron tomograms, which are analyzed to assess the spatial resolution that can be achieved for different vertical positions in the specimen. The uptake of gold nanoparticles coated with low-density lipoprotein (LDL) is studied. The LDL is found to assemble in clusters. The clusters contain nanoparticles taken up on different days, which are joined without mixing their nanoparticle cargo.

Nanoparticles have a wide range of applications in science and technology. Their sizes are often measured using transmission electron microscopy (TEM) or X-ray diffraction. Here, we describe a simple computer algorithm for measuring particle size distributions from TEM images in the presence of an uneven background. The approach is based on adaptive thresholding, making use of local threshold values that change with spatial coordinate. The algorithm allows particles to be detected and characterized with greater accuracy than using more conventional methods, in which a global threshold is used. Its application to images of heterogeneous catalysts is presented., (Copyright © 2010 Elsevier B.V. All rights reserved.)

Conformal coating of silicon (Si) anode particles is a common strategy for improving their mechanical integrity, to mitigate battery capacity fading due to particle volume expansion, which can result in particle crumbling due to lithiation induced strain and excessive solid–electrolyte interface formation. Here, we use operando transmission electron microscopy in an open cell to show that TiO2 coatings on Si/SiO2 particles undergo thickness dependent rupture on battery cycling where thicker coatings crumble more readily than thinner (∼5 nm) coatings, which corroborates the difference in their capacities. [ABSTRACT FROM AUTHOR]

The development of magnetocaloric materials represents an approach to enable efficient and environmentally friendly refrigeration. It is envisioned as a key technology to reduce CO2 emissions of air conditioning and cooling systems. Fe-Rh has been shown to be one of the best-suited materials in terms of heat exchange per material volume. However, the Fe-Rh magnetocaloric response depends on its composition. Hence, the adaptation of material processing routes that preserve the Fe-Rh magnetocaloric response in the generated structures is a fundamental step towards the industrial development of this cooling technology. To address this challenge, the temperature-dependent properties of laser synthesized Fe-Rh nanoparticles and the laser printing of Fe-Rh nanoparticle inks are studied to generate 2D magnetocaloric structures that are potentially interesting for applications such as waste heat management of compact electrical appliances or thermal diodes, switches, and printable magnetocaloric media. The magnetization and temperature dependence of the ink's γ-FeRh to B2-FeRh magnetic transition is analyzed throughout the complete process, finding a linear increase of the magnetization M (0.8 T, 300 K) up to 96 Am2/kg with ca. 90% of the γ-FeRh being transformed permanently into the B2-phase. In 2D structures, magnetization values of M (0.8 T, 300 K) ≈ 11 Am2/kg could be reached by laser sintering, yielding partial conversion to the B2-phase equivalent to long-time heating temperature of app. 600 K, via this treatment. Thus, the proposed procedure constitutes a robust route to achieve the generation of magnetocaloric structures. [ABSTRACT FROM AUTHOR]

The defined assembly of nanoparticles (NPs) in polymer matrices is an important prerequisite for next‐generation functional materials. A promising approach to control NP positions in polymer matrices at the nanometer scale is the use of block copolymers. It allows the selective deposition of NPs in nanodomains, but the final defined and ordered positioning of the NPs within the domains has not been possible. This can now be achieved by coating NPs with block copolymers. The self‐assembly of block copolymer‐coated NPs directly leads to ordered microdomains containing ordered NP arrays with exactly one NP per unit cell. By variation of the grafting density, the inter‐nanoparticle distance can be controlled from direct NP surface contact to surface separations of several nanometers, determined by the thickness of the polymer shell. The method can be applied to a wide variety of block copolymers and NPs and is thus suitable for a broad range of applications. [ABSTRACT FROM AUTHOR]

Abstract: Knowledge of degradation pathways of catalyst/support ensembles aids the development of rational strategies to improve their stability. Here, this is exemplified using indium tin oxide (ITO)‐supported Platinum nanoparticles as electrocatalysts at fuel cell (FC) cathodes under degradation protocols to mimic operating conditions in two potential regimes. The evolution of crystal structure, composition, crystallite and particle size is tracked by in situ X‐ray techniques (small and wide angle scattering), metal dissolution by in situ scanning flow cell coupled with mass spectrometry (SFC ICP‐MS) and Pt surface morphology by advanced electron microscopy. In a regular FC operation regime, Pt poisoning rather than Pt particle growth, agglomeration, dissolution or detachment was found to be the likely origin of the observed degradation and ORR activity losses. In the start‐up regime degradation is actually suppressed and only minor losses in catalytic activity are observed. The presented data thus highlight the excellent nanoparticle stabilization and corrosion resistance of the ITO support, yet point to a degradation pathway involving Pt surface modifications by deposition of sub‐monolayers of support metal ions. The identified degradation pathway of the Pt/oxide catalyst/support couple contributes to our understanding of cathode electrocatalysts for polymer electrolyte fuel cells (PEFC). [ABSTRACT FROM AUTHOR]

Calixarenes can be used to promote the self-assembly of thermoremanent cobalt nanoparticles into bracelet-like rings below 100 nm in diameter. These kinetically stable assemblies are regulated by the equilibrium between enthalpic gain (dipole-dipole and long-range van der Waals interactions) and entropic loss, analogous to the thermodynamic balance of forces governing supramolecular self-assembly. Examination of the Co nanoparticle rings by electron holography (an electron microscopy technique for imaging in-plane magnetic induction) reveals the existence of chiral flux closure (FC) domains at room temperature, comprising a 'racemic' mixture of clockwise and anticlockwise states. Furthermore, these FC polarisations can be reversed by applying out-of-plane magnetic pulses (Hz) in alternating directions. This switching behaviour has no known analogy at the macroscopic level, and may represent a uniquely nanoscale phenomenon. [ABSTRACT FROM AUTHOR]

Electron holography is a powerful technique for characterizing electrostatic potentials, charge distributions, electric and magnetic fields, strain distributions and semiconductor dopant distributions with sub-nm spatial resolution. Mapping internal electrostatic and magnetic fields within nanoparticles and other low-dimensional materials by TEM requires both high spatial resolution and high phase sensitivity. Carrying out such an analysis fully quantitatively is even more challenging, since artefacts such as dynamical electron scattering may strongly affect the measurement. In-line electron holography, one of the variants of electron holography, features high phase sensitivity at high spatial frequencies, but suffers from inefficient phase recovery at low spatial frequencies. Off-axis electron holography, in contrast, can recover low spatial frequency phase information much more reliably, but is less effective in retrieving phase information at high spatial frequencies when compared to in-line holography. We investigate gold nanoparticles using hybrid electron holography at both atomic-resolution and intermediate magnification. Hybrid electron holography is a novel technique that synergistically combines off-axis and in-line electron holography, allowing the measurement of the complex wave function describing the scattered electrons with excellent signal-to-noise properties at both high and low spatial frequencies. The effect of dynamical electron scattering is minimized by beam tilt averaging. [ABSTRACT FROM AUTHOR]

Abstract: An approach that can be used to measure the magnetic moment of a magnetized nanoparticle or nanostructure from an electron-optical phase image is introduced. The measurement scheme is based on integration of the gradient of the measured phase image within a circular boundary that contains the structure of interest. The quantity obtained is found to be directly proportional to the magnetic moment of the particle, with a constant of proportionality that does not depend on the particle''s shape or magnetization state. The measurement of magnetic moments from both simulated and experimental phase images is demonstrated, and strategies are presented that can be utilized to overcome sources of error associated with, for example, the presence of neighboring magnetic particles and the perturbation of the holographic reference wave. [Copyright &y& Elsevier]

Shape-controlled octahedral Pt-Ni alloy nanoparticles exhibit remarkably high activities for the electroreduction of molecular oxygen (oxygen reduction reaction, ORR), which makes them fuel-cell cathode catalysts with exceptional potential. To unfold their full and optimized catalytic activity and stability, however, the nano-octahedra require post-synthesis thermal treatments, which alter the surface atomic structure and composition of the crystal facets. Here, we address and strive to elucidate the underlying surface chemical processes using a combination of ex situ analytical techniques with in situ transmission electron microscopy (TEM), in situ X-ray diffraction (XRD), and in situ electrochemical Fourier transformed infrared (FTIR) experiments. We present a robust fundamental correlation between annealing temperature and catalytic activity, where a ~25 times higher ORR activity than for commercial Pt/C (2.7 A mgPt-1 at 0.9 VRHE) was reproducibly observed upon annealing at 300 °C. The electrochemical stability, however, peaked out at the most severe heat treatments at 500 °C. Aberration-corrected scanning transmission electron microscopy and energy-dispersive X-ray spectroscopy (EDX) in combination with in situ electrochemical CO stripping/FTIR data revealed subtle, but important, differences in the formation and chemical nature of Pt-rich and Ni-rich surface domains in the octahedral (111) facets. Estimating trends in surface chemisorption energies from in situ electrochemical CO/FTIR investigations suggested that balanced annealing generates an optimal degree of Pt surface enrichment, while the others exhibited mostly Ni-rich facets. The insights from our study are quite generally valid and aid in developing suitable post-synthesis thermal treatments for other alloy nanocatalysts as well. [ABSTRACT FROM AUTHOR]

We use conventional and aberration-corrected transmission electron microscopy (TEM) and ab initio calculations to investigate the structural and electronic properties of β-FeSi2 nanoparticles, which are a promising material for photovoltaic applications due to a band gap of <1 eV and a high absorption coefficient. The nanoparticles have average sizes of ∼20 nm, form aggregates, and are prepared by gas-phase synthesis. Amorphous SiOx shells with thicknesses of ∼1.7 nm around β-FeSi2 cores are identified on individual nanoparticles using electron energy-loss spectroscopy, while stacking fault domains in the nanoparticles are observed using high-resolution TEM, nanobeam electron diffraction, and automated diffraction tomography. Ab initio calculations indicate only minor changes in band structure in the faulted structure when compared to perfect β-FeSi2. The optical properties of imperfect β-FeSi2 nanoparticles are therefore expected to be the same as those of the perfect structure, suggesting that β-FeSi2 nanoparticles are suitable candidates for use in optical absorber layers in thin film solar cells. [ABSTRACT FROM AUTHOR]

• The effect if Si3N4 membranes on the accuracy of atom counting for ADF STEM. • At 80kV the scattering is too high, only +/- 2 atom accuracy is possible. • At 200kV/300kV single atom precision is possible. • Si3N4 membranes above the sample systematically lower image intensity in the image. Computer simulations are used to assess the influence of a 20-nm-thick SiN x membrane on the quantification of atomic-resolution annular dark-field (ADF) scanning transmission electron microscopy images of Pt nanoparticles. The discussions include the effect of different nanoparticle/membrane arrangements, accelerating voltage, nanoparticle thickness and the presence of adjacent atomic columns on the accuracy with which the number of Pt atoms in each atom column can be counted. The results, which are based on the use of ADF scattering cross-sections, show that an accuracy of better than a single atom is attainable at 200 and 300 kV. At 80kV, the scattering in a typical SiN x membrane is sufficiently strong that the best possible atom counting accuracy is reduced to +/- 2 atoms. The implications of the work for quantitative studies of Pt nanoparticles imaged through SiN x membranes are discussed. [ABSTRACT FROM AUTHOR]

We present an innovative approach to the production of single-crystal iron oxide nanorings employing a solution-based route. Single-crystal hematite (α-Fe[sub2]O[sub3]) nanorings were synthesized using a double anion-assisted hydrothermal method (involving phosphate and sulfate ions), which can be divided into two stages: (1) formation of capsule-shaped α-Fe[sub2]O[sub3] nanoparticles and (2) preferential dissolution along the long dimension of the elongated nanoparticles (the c axis of α-Fe[sub2]O[sub3]) to form nanorings. The shape of the nanorings is mainly regulated by the adsorption of phosphate ions on faces parallel to c axis of α-Fe[sub2]O[sub3] during the nanocrystal growth, and the hollow structure is given by the preferential dissolution of the α-Fe[sub2]O[sub3] along the c axis due to the strong coordination of the sulfate ions. By varying the ratios of phosphate and sulfate ions to ferric ions, we were able to control the size, morphology, and surface architecture to produce a variety of three-dimensional hollow nanostructures. These can then be converted to magnetite (Fe[sub3]O[sub4]) and maghemite (γ-Fe[sub2]O[sub3]) by a reduction or reduction-oxidation process while preserving the same morphology. The structures and magnetic properties of these single-crystal α-Fe[sub2]O[sub3], Fe[sub3]O[sub4], and γ-Fe[sub2]O[sub3] nanorings were characterized by various analytical techniques. Employing off-axis electron holography, we observed the classical single-vortex magnetic state in the thin magnetite nanorings, while the thicker rings displayed an intriguing three-dimensional magnetic configuration. This work provides an easily scaled-up method for preparing tailor-made iron oxide nanorings that could meet the demands of a variety of applications ranging from medicine to magnetoelectronics. [ABSTRACT FROM AUTHOR]

The progress in colloidal synthesis of Pt–Ni octahedra has been instrumental in rising the oxygen reduction reaction catalytic activity high above the benchmark of Pt catalysts. This impressive catalytic performance is believed to result from the exposure of the most active catalytic sites after an activation process, chemical or electrochemical, which leads to a Pt surface enrichment. A foremost importance is to understand the structure and the elemental distribution of Pt–Ni octahedral, which leads to an optimal catalytic activity and stability. However, the factors governing the synthesis of the Pt–Ni octahedra are not well understood. In this study, unprecedented surface atomic segregation of Pt atoms in a Ni‐rich Pt–Ni octahedral nanoparticle structure is established by advanced electron microscopy. The Pt atoms are almost exclusively located on the edges of the Pt–Ni octahedra. This structure is formed in a pristine form, i.e., prior to any chemical or electrochemical etching. A new growth mechanism is revealed, which involves the transformation from an octahedron with a Pt‐rich core to a Ni‐rich octahedron with Pt‐rich edges. This observation may pave the way for a deeper understanding of this class of Pt–Ni octahedral nanoparticles as an electrocatalyst. The growth mechanism is revealed for Pt–Ni octahedra with a Ni‐rich core and Pt‐rich edges. The growth mechanisms involve the subsequent formation of irregular shaped Pt‐core/Ni‐shell nanoparticles (NPs), octahedral NPs with Pt‐rich core and edges, and finally the transformation to Ni‐rich octahedral NPs with Pt‐rich edges. [ABSTRACT FROM AUTHOR]